How to write data from Basic Cube to Transactional Cube

Hi experts,
My problem is the following: I have a Transactional Infocube (IC1) and a basic Infocube (IC2). They have both the same structure. IC2 is loaded with data and other data is keyed in IC1.
I would like to write data from IC2 to IC1 and eliminate data redundancy if there can be some.
Can anyone tell me how I can do that?
Thanks in advance

Hi,
Yes , you have to create a multiplanning area ..
In the planning level , filter the value which you want to copy from basic to transactional cube .
Fields to be changed : Planning area and others as per your need..
Field for condition : if you want to copy data from 2006 then give calyear as field for condition.
Parameter group : give the value 'from' as basic cube 'to' as your transactional cube ..

Similar Messages

How to write data from query into Real time cube?

Hi All,
Can anyone explain me step by step how to write data into a real time cube from front end queries.
Thanks in advance

Hi
You can do this using Integrated Planning
You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Regards
Ravi

How to write data from planning folder into a planning cube in BPS

Hi All,
I have an issue in writing data from planning folder to planning cube.
I updated the excel sheet in planning folder in UPSPL tcode.
After clicking on save button in the excel sheet the data did not get updated into the cube.
I set the real time cube to planning mode.
Please let me know if there are any settings to save the data to cube or how can it be done.
Thanks in advance.
Regards,
Lavanya.

Hi Lavanya,
What do you mean by "the data did not get updated into the cube" ?
Don't you find a yellow request in the cube administration transaction ? What happened if you set it to green ?
Regards,
Fred

How to write data from 24 bit card DAQ card unscaled

Hello
I have a PXI 4462 Data acquistion card to record data. It is 24 bit card. I have two questions about writing data from this card.
1) When acquiring the analog signal the card changes the analog to digital and when writing it scales back to analog signal. I want to write the analog signal in the digital form. How can i do that.
2) PXI 4462 is a 24 bit card, but there is either 16 bit or 32 bit when writing it. So if i write it in 32 bit a byte is not used. only 3 bytes will be used to write the data and one byte wont have any data in it. It takes space on the hard disk. Is there any way to save this one byte so that I will be able to write just 24 bit data without loosing that one byte which would save me plenty of space.
The sampling rate is usually 96Ks/sec.
Thanks in advance
Regards
Nitin

If you want to write 24 bits instead of 32, then you have to change the hi(x) to 8 bits instead of 16. The lo(x) will stay at 16 so the 8 plus 16 equals 24 bits. Simple arithmetic. You asked how to get rid of the upper 8 bits and if you leave it at 16, then you haven't gotten rid of anything.
Why do you think you have to write to separate files? I said do a write of the 16 bit and then a write of of the 8 bit component. It's just two Write File functions to the same file. You could also bundle them together and do a single write but I think there would be a little additional overhead with that.
Message Edited by Dennis Knutson on 04-06-2006 07:15 AM
Attachments:
write binary.JPG ‏5 KB

How to write Data from INI file to Ring control

Hai,
I need to write the Data read from INI file to a RING control.While doing this operation using Variants i am getting error.
I will be pleased if somebody help me.I have attached the Particular INI file and the VI.
Solved!
Go to Solution.
Attachments:
Read Serial IO INI data.vi ‏34 KB
Serial IO paramters.ini ‏1 KB
Serial Engine Initialize.ctl ‏6 KB

Adding data to ring
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Adding data to ring.vi ‏10 KB

How to store data from Host.vi in cRIO-9074

TejasKumar Patel
I implemented a advance Measurement and Control system using cRIO-9074
with c-Series I/O cards( NI 9217, 9411, 9264)
I have some questions about it,
(1)- Data rate from FPGA targate to host vi is too low. how can I increase
it, when I run my host VI, sometimes all temperature sensor update at
same time and sometimes one by one, can you please give me some hint, how
can I correct it, I used two FIFOs for NI-9411 digital pulses, I put all
Digital input and all analog output and input in a seperate while loop in
FPGA targate VI.
(2)- I have to write that data to analyse for further result. I tried all
possible way to write data including wite to spreadsheet.vi, write to
text.vi, Data storage.vi, Write to measurement.vi. All this VI work
efficientlywhen it run individualy, But when I connect this VI to
writedata from FPGA host VI. than it always give empty file.
I saw your post in NI discussion forum about how to write data from
Host.vi, But still I am confuse that how can I creat a protocol between
host VI and Fpga target vi. to write the data in a file. I have nearabout
38 channel to write data.
(3)- I have to measure time difference between two digital pulses, to find
a flow rate. I am using counter for it with risisng edge shot.vi, but when
i get a timestemp when there is risisng edge for the second rising edge
how can I get timestemp. Its like i have to measure time between two
pulses, I triend waveform measurement.vi to find cycle period. but it not
worked. any other was to measure it.
I am stuck in this question since from last one month. I already followed
NI-discussion forum solution but it doesnt work. I think the way I applied
is may be wrong.
Looking forward to hear from you soon.
Plese send an additional email copy to [email protected]
Thank you and Best Regards,

Thanks Joseph for your support,
1-      If I count the ticks between the pulses it always seems different ….because this method I already tried, but it does not work, like some times it shows 9099 tick and at the second pulse it shows like some more or less ticks not the same ticks every time. To complete my project, the biggest problem is the data storage.
2-      As you gives the solution in NI forum, “low level file I/O Vis such as Write to text file” FPGA target not support this VI. And mainly I want to write data from HOST.vi, because I am process those data …and I need to store it. For to figure out my result.
3-      If I use “Write to text file. VI (Sub-VI ) to FPGA.vi, it not support because it support string data and I have FIXpoint data. And can you explain me what is low level file IO, and how can I use in fpga.vi??
4-      Yes, for my project time stamp it really necessary, for data analysis.
5-      I need the time stamp to find out what was the system response at the time. As our project based on weather temperature, I need time stamp.
Waiting for your reply,
Thanks and Regards,
Patel

What is a cube? how we store data in that? how we fetch data from cube?

Hi,
What is a cube? how we store data in that? how we fetch data from cube?
Regards.
venkat

>
venkey B wrote:
> Hi,
>
>
> What is a cube? how we store data in that? how we fetch data from cube?
>
>
> Regards.
>
> venkat
Hi Venkat,
I guess you mean an infocube from the SAP BI product. I propose to look at the forum for Business Intelligence to find your answers.
E.g. SAP POS DM writes the sales data in infocubes.....

How to extract data from BW cube

Hello friends,
Kindly advice me how to extract data from BW cube.
My requirement is to write an ABAP program to retrive the data from the BW cube.
Kindly provide me any sample code for my requirement.
Thanks in advance.
S.Jaffer Ali

Hi Jaffer,
If you want to load the data from the BW cube into any other Cube/ODS in the same of another BW system you can use the export datasource.
If you want to load the data from the BW cube into any other system then you can use any of these options:
1. Infospoke - Open hub service and is widely used.
2. APD
3. RFC enabled fn modules.
Bye
Dinesh

Integrated Planning - trying to load data from basic to realtime cube

I have created a mulitprovider for my basic and realtime cube, and trying to copy data from basic to realtime using standard copy function in IP. It is not erroring out but data is not getting copied either. Both cubes having exactly the same structure. I can do a export datasource or a BPS multiplanning area..but I need a solution in IP..Any help would be appreciated...Thanks much..

Infoprovider --> Multiprovider
Agg Level --> Selected fields need to be copied
Filter --> None selected, wanted to copy as is
Pl. Fnc --> Standard Copy.
                char usage: Selected infoprovider for 'changed'
                to parameters: selected all key figs ( percent and amount)
                from and to values: Basic to realtime
Let me know.

How to load data from a ODS to CUBE Request ID - by - Request ID?

How to load data from a ODS to CUBE Request ID - by - Request ID?
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "data mart status of request" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

Read and write data from / to cube in CUSTOM_LOGIC BADI

Here are the details:
BPC displays a set of details - with 5 rows and 5 columns. There are 50 additional rows for the 5 columns which are blank to start with.
User changes a cell. BPC 10 only sends that cell which is changed by the user in CUSTOM_LOGIC and WRITE_BACK BADIs.
I need to get other 5 X 5 cells (other than 1 cell, which is changed and being passed in the BADIs) details to determine all the details and calculate the additional 50 rows. After calculating these values, i need to update the cube so that the BPC report refreshes with the data i have updated.
Whats the best way? What are the funtion modules involved in reading / writing? Are there any best practices to read / write data from cube.
Appreciate your help.

Hi Ravan,
Look at my sample write back badi here: http://scn.sap.com/message/14290977#14290977
At the end of the code I have values updated in ct_data. The contents of ct_data will be automatically written to the cube (you don't need to have special code to write data).
B.R. Vadim

HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE

HI,
HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE? & WITH EXAMPLE.

hi,
chk this, put the data into an excel file.
fields inside it are name and age.
sample excel sheet.
coloumn 1 is name and column 2 is age
name age
A 8
C 13
D 55
DATA : int_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
data : record like db_name_age occurs 0 with header line.
DATA : v_start_col TYPE i VALUE '1', "starting col
 v_start_row TYPE i VALUE '1', " starting row
 v_end_col TYPE i VALUE '2', " total columns
 v_end_row TYPE i VALUE '10'. "total no of record
FORM f_upload .
CLEAR : int_excel, int_excel[].
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = wf_filename
 i_begin_col = v_start_col
 i_begin_row = v_start_row
 i_end_col = v_end_col
 i_end_row = v_end_row
 TABLES
 intern = int_excel
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*Message is 'Unable to upload data from ' wf_filename.
 MESSAGE e169(zm050) WITH wf_filename.
ELSE.
 SORT int_excel BY row col.
 REFRESH : record.
 CLEAR : record.
 LOOP AT int_excel.
 CASE int_excel-col. "go thru each column.
 WHEN 1.
 record-name = int_excel-value.
 WHEN 2.
 record-age = int_excel-value.
 ENDCASE.
 AT END OF row.
 APPEND record.
 CLEAR record.
 ENDAT.
 ENDLOOP.
*inserting into table
modfiy db_name_age from table record.
ENDIF.
ANOTHER EXAMPLE
TYPE-POOLS truxs.
types: begin of t_tab,
col1(5) type c,
col2(5) type c,
col3(5) type c,
end of t_tab.
data : itab type standard table of t_tab,
 wa type t_tab.
data it_type type truxs_t_text_data.
parameter p_file type rlgrap-filename.
data ttab type tabname.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = p_file
start-of-selection.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
i_tab_raw_data = it_type
i_filename = p_file
tables
i_tab_converted_data = itab[]
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
end-of-selection.
loop at itab into wa.
write : wa-col1,
 wa-col2,
 wa-col3.
endloop.
rgds,
anver
if hlped pls mark points

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

How to write data from Basic Cube to Transactional Cube

Similar Messages

Maybe you are looking for