Behaviors commands

Where I can find a list of commands for the behaviors, I can choose, for example, on mouse over, on key up etc. but I don't know any particular commands like for example:
- on click and then calcTotal()
Is there any full list of them?

On the Behaviors Panel, press the + sign (Add New Behavior).
In addition to the standard behaviors included in        Dreamweaver, there are more available on the Adobe Exchange. You        can get to it by pressing the + sign and selecting Get More Behaviors near the bottom of the list.
For more solutions, look to  Dynamic Drive
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media  Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Similar Messages

  • CS3 Bug with Server Behavior Command?

    Hi there,
    by updating a "Command" with the Server Behavior window
    (windows XP) the upcoming window does not read all the Defaulkt
    Values and Run Time Values anymore (do not know if ever did).
    Here is an
    Example .
    anybody saw the same problem? Or anybody knows a solution?
    thx
    Sebastian

    But if you have any pull, you should pass the note along to the Dreamweaver team and have them fix the bugs.
    It's not a question of "pull". Adobe (or any other software company) decides what to fix, improve, or drop on a cost/benefit basis. Fixing an ASP feature might be relatively simple, but doing so means that something else gets ignored. The ASP feature might be very crucial to you, but if Adobe considers it a low priority in terms of affecting overall sales, it's unlikely to get fixed. Whether that's the right business decision is not for me to say.
    I have submitted a large number of bug reports and feature requests over the years. Some are acted upon, others aren't. So far, I have accepted that the new features are, on balance, worth more than the features that haven't been fixed or implemented. Each user has to make the same decision. If people stop buying Dreamweaver because they think Adobe has made the wrong choices, either Dreamweaver will decline or Adobe will change its policies.
    I have seen new tools, such as Zend Studio, offered by other companies that do PHP things far better than Dreamweaver. I use Zend Studio, and like it a lot; but as an overall web development tool, Dreamweaver still beats it hands down. But neither Dreamweaver nor Adobe can rest on their laurels. That's why I encourage people to make use of the feature request/bug report form at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform to tell Adobe what's important to them. There's no guarantee that your ideas will be adopted, but it's the only sure way to get ideas directly to the people who have the power to implement them.

  • Motion Behavior Command X

    I was in the library under Behaviors, Text Sequence, Text-Subtle... I selected Shimmer In. I hit command x accidentally and "cut" the Effect. I tried paste it back in with "command V," but no luck.
    (command z didn't work either)
    I right clicked the "Shimmer Out" effect and selected show in finder... Finder Opened to reveal "Shimmer Out" but nope, my "shimmer In" effect wasn't there. Not even the trash. Does anyone know what just happened? I would still like to have this effect in my motion toolbox.
    Oh, and opening a new project doesn't help either. idk.
    Any responses and help are greatly appreciated... Thanks!
    Jer

    You need to re-install this behavior. I think of three methods :
    • Copy it from an other machine (someone can send it to you, I can later today if you mail me)
    • Copy it from a project where you had use it. Just drag it from project to behavior. Whis this method it will only be visible by the user who made the copy.
    • the hard one : re-install Motion
    And I agree, this feature is not enough protected.
    Michel

  • Behaviors without helper functions

    Hi all, I'm trying to create a behavior that doesn't require
    a behavior
    function, is this possible using the behaviors API?
    Dreamweaver requires a behaviorFunction() function in
    behaviors, and
    returnig an empty string results in a message "The Action
    will not be
    applied".
    Is it possible to insert behaviors without a
    behaviorfunction?
    Sure I can create proxy functions that in turn call the
    actual command (eg
    alert()) but this seems a lot of overhead to put into the
    document.
    Joris

    "E Michael Brandt" <[email protected]> wrote
    in message
    news:fb3rqv$qv3$[email protected]..
    >
    > If you read the Extension help you'll see that certain
    functions are
    > indeed required by each type of Extension, whether
    Behavior, Command, or
    > Object. And certain methods are disallowed by each type
    as well.
    >
    Yes i have the manual in front of me, i'm building a behavior
    to call
    commands in the AIR runtime, the air object is just available
    in the
    document when the AIRAliases.js is included, it doesn't need
    a "helper"
    function.
    So what i'm doing now is inserting a proxy function to call
    the original
    function, return the name of the proxy function from
    behaviorFunction and
    wrap the call, that just seems like a lot of overhead.
    Joris
    function AIR_exec(cmdName) { //v1.0
    if(typeof air != 'Object'){
    alert('ERROR: AIR object not loaded, please include
    AIRAliases.js');
    } else {
    var cmd = 'air.'+cmdName+'(';
    for(var i=1; i<arguments.length; i++){
    cmd += (i==1) ? arguments
    : ','+arguments;
    cmd += ')'
    eval(cmd);
    //Return the name of the function that we want to be inserted
    into the
    user's document.
    function behaviorFunction(){
    return "AIR_exec";
    //Returns the actual function call string that will be
    inserted into the
    event handler
    function applyBehavior() {
    addAIRAliases();
    return
    "AIR_exec('trace',"+document.theForm.traceMessage.value+")";

  • Flash Action Happening Too Early

    I'm attempting to have a flash video file play before loading a web site.
    The way I'm doing it is to import an FLV video that I created in AE, into Flash, set the frame rate of the Flash to that of the (video 24fps) and add an action at frame 241 which calls the URL of the home page to be loaded.
    On the authoring workstation, it seems to work okay... the .swf file plays (in VLC Media Player) and then a web browser opens.
    Once this .swf and its associated html file are uploaded to the server, the video, instead of playing all 240 frames, plays about 40-42 frames and then loads the web site.
    I spent hours searching for another embedded time code somewhere in the html file, and went over the flash project over and over again, but could not find a command that was making it dump and load the home page prematurely.
    What could be causing this behavior, and how could I go about correcting it so that the entire 10-second video is played before the site loads the home page?

    Initially, I had simply imported it as streaming video, but I redid the whole file, after reading your reply above, and discovered how to embed it in the timeline. However, the results are the same, even though the command to load mwhdvideo.com is at frame 241. I can't understand why it skips 80% of the remaining frames and just goes to the "load web page" behavior.
    Now if I open the index.html on a local PC, it will run the full 10-seconds of video and then pop up a security warning about Flash trying to open a page on another domain or something similar. But once it is on the server, it no longer waits 10 seconds and cuts over to the home page after just 2 seconds. I've run out of ideas.
    UPDATE:
    Just for kicks, I tried an experiment: I removed the behavior command at the end of the flash file (the one that loads the home page) and tried it both on the local PC and on the server:
    The local copy played through and continued repeat looping the video without ever calling the home page.
    The copy uploaded to the server played the first 40 frames or so and forwarded to the home page.
    I'm starting to think it's not the flash file, but something peculiar going on when it's on a live server...

  • TYPE and SIZE, 2 more columns to the variable in the Command behavior?

    DW 8.02 added 2 more columns to the variable in the Command
    behavior, TYPE and SIZE. What do you put in here?
    What is the difference for Access text, Date/Time, number and
    Memo columns.
    The Dreamweaver DOCS don't cover this update and you can't OK
    the COMMAND without these two columns

    This will be of some help:
    http://www.w3schools.com/ado/ado_datatypes.asp
    You should be able to gather the column size from the
    database's table
    definition. Typically, columns that hold text are one byte
    per character
    (two for Unicode), whereas integers are 4 bytes. Other
    numeric types and
    date types vary among database systems.
    "lovewebdev" <[email protected]> wrote in
    message
    news:ec0it5$h20$[email protected]..
    > DW 8.02 added 2 more columns to the variable in the
    Command behavior, TYPE
    > and
    > SIZE. What do you put in here?
    > What is the difference for Access text, Date/Time,
    number and Memo
    > columns.
    >
    > The Dreamweaver DOCS don't cover this update and you
    can't OK the COMMAND
    > without these two columns
    >

  • The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
    I have read that the battery can swell and that would put pressure on the trackpad.

  • Dreamwever CS5 ERROR server behavior panel cannot determine wheter "command" or "recordset (Query)"

    i get this error whenever i open pages created in CS4. ive tried deleting the cache file... deleting the entire configuration folder and letting DW re build it.. nothing... error still there. how can i turn it off? i also cant seem to find the "edit server behaviors" button.. double click? well DW freaks out with that aswell... yes i know i have some insanely hand edited code.. basically use DW as notepad replacement.. with extra features like having the option of "add recordset" then going and editing it to my liking.
    the error
    [quote]
    The server behavior panel cannot determine whether "command" or "recordset (Query)" is applied to your page. Please select edit Server Behaviors and change one of the two behaviors to ensure that each is uniquely identifiable.
    [/quote]
    this is a total show stopper for me.. im going to have to go back to a previous version cant click "ok" every time i open a page.. and every time i follow a include file.
    development ASP
    Dreamweaver CS5
    Question.. how to disable the error message from popping up? i'll take my chances with hand editing the recordset / command by hand if i need it changed.

    this is bleh... having to resort back to CS4..
    is there any way to legaly go back to cs4 dreamweaver but still use the other cs5 applications?

  • The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" ...

    Suddenly getting this goofball message in DW5.5 on Win7:
    "The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" is applied to your page. Please select Edit Server Behaviors and change one of the two behaviors to ensure that each is uniquely identifiable."
    Crazy thing is, it only happens on my workstation.
    DW5.5 on my laptop opens the same .asp pages without this crazy message popping up.
    Anybody know what the issue is?

    I'd suggest that no answer means no answer yet. The person who can help may not have been on the forum the day the post was made.
    That said, I'm starting to suspect that the cause must be an extension. Both boxes have the same version of DW and the same OS but both don't have the exact same extensions installed. Will play around and see what happens.

  • Odd trackpad behavior, opens Command+ F in any program.

    I have an odd behavior on my Mac that's starting to get pretty annoying.
    I have a late 2009 model. If I am in say Safari, and I wiggle my finger near the bottom of the track pad, (wiggling up and down on the bottom center edge of the trackpad) it opens up the search bar for Safari.
    Basically Command+F.
    If I am on the desktop (Finder) and do the same action it opens Command+ F once again, this time just in Finder.
    In iTunes, the same motion on the trackpad puts me in full screen, which is, you guess it. Command+ F.
    I have tried to get rid of this behavior by terminal commands killall Finder, killall Dock, and also by moving the user/library/preferences folder contents to the desktop, so that programs rewrite their preferences, but everything still has the same behavior.
    Any ideas?
    - Pixel -

    Never heard of anything like it, frankly. Run the Apple Hardware Test you'll find on one of the DVDs that came with your MBP, and make an exact note of any errors it reports. Then make a Genius Bar appointment at an Apple Store and demonstrate the problem to the Genius. Also show the Genius the text of the error report (if there was one).

  • Command Server Behavior in CS4 Troubled

    Does anyone know what happened to the Command server behavior in CS4.
    When I use MX 2004 to create an Update Command, I get the following code on the page:
    set Command1 = Server.CreateObject("ADODB.Command")
    Command1.ActiveConnection = MM_sportstest_STRING
    Command1.CommandText = "UPDATE board  SET name = 'test' WHERE name IS NULL"
    Command1.CommandType = 1
    Command1.CommandTimeout = 0
    Command1.Prepared = true
    Command1.Execute()
    When I use CS4 to create the same Update Command, I get the following code on the page:
    Dim Command1__@@varName@@
    Command1__@@varName@@ = "@@defaultValue@@"
    If (@@runtimeValue@@ <> "") Then
      Command1__@@varName@@ = @@runtimeValue@@
    End If
    Set Command1 = Server.CreateObject ("ADODB.Command")
    Command1.ActiveConnection = MM_sportstest_STRING
    Command1.CommandText = "UPDATE board  SET name = "test' WHERE name IS NULL"
    Command1.CommandType = 1
    Command1.CommandTimeout = 0
    Command1.Prepared = true
    Command1.Execute()
    CS4 does not even recognize the resulting code as a Command in the Server Behaviors window.  If I open both pages in MX 2004, the MX 2004 page is interpreted, but not the CS4 page.
    It looks like CS4 is not able to create Update Commands nor any other type of Command server behavior.  I am using ASP/VBScript.
    Does anyone have any insight to this.......or is it just a bug in CS4??
    Mike

    I'm having the same problem.  I cannot create any new commands, In addition, CS4 will not recognize any of the commands that were created from DW8 and prior versions.

  • Make "step backward" command maintain current layer selection (like the "undo" command's behavior)...

    Please make Photoshop's "step backward" command maintain current layer selection (like the "undo" command's behavior). So that when using the "step backward" to undo something it doesn't unnecessarily select a different layer . The current "step backward" layer change issue is inconvenient because it causes unnexpected layer selection change.

    Has this happened yet ( an upgrade that fixes the step back layer switch problem ) in any updates?
    Arghhh very annoying.

  • Command-Delete behavior

    I like to use command-delete in the finder to get rid of files that I don't need, especially in combination with preview. However, once I delete an item, the highlight disappears (i.e. nothing is selected in the finder window). Is there a way to configure the behavior of command-delete such that it moves the selection to the next item down in the list?

    This behavior is not configurable? I'm amazed that there's not a way to delete a string of items sequentially, having a chance to view each one before deleting.

  • Applying/Removing Behavior at Run-Time.  (Or the "pass" command)

    I know it must be possible to do this, but I can't figure out
    how. I need a
    particular sprite to have a behavior either applied or
    removed at run-time.
    I tried using the "pass" command to get mouse-input to click
    through the
    object if certain conditions are not true, but it doesn't
    seem to work.
    Here's a sample of the script:
    on mouseWithin me
    if (someConditions) then
    if the mouseDown then
    <do a bunch of stuff>
    end if
    else
    pass
    end if
    end
    Technically, if the conditions are FALSE, it should skip
    right past the rest
    and pass the mouse input down to lower sprites, but it
    doesn't. I've tried
    a whole bunch of different things, adding the "pass" to
    mouseDown and
    mouseUp events, but most of the things in this game are
    controlled by
    mouseWithn/if the mouseDown, allowing you to click and drag
    over multiple
    sprites to record a down-click on all of them. (Also tried
    using
    mouseEnter, but that didn't work either.) I'm guessing that
    the "pass"
    command only works on explicit "mouseUp" and "mouseDown"
    events, and doesn't
    apply to other cases. If that's true, then I need to simply
    have this whole
    behavior not be there if those conditions are FALSE. Any
    help?

    Never mind, I got it.

  • Siri "show reminders" command erratic behavior

    iPhone 4s and iPad 3 both with iOS 8.1
    when asking Siri to "show reminders" it sometimes show them on Siri's display and other times it just open the Reminder application.
    Before on iOS 7 it would only "show reminders" in Siri's display, and then open the application if asked for ("open Reminders application").
    Has also someone else noticed this erratic behavior with these commands, and have a solution to fix it?

    Thanks Tom,
    That's the crazy part - sometimes I'm doing nothing - I have no airport installed or any wireless accessories either.
    When it last acted upon (after writing 1st post) I played along - since it thought there was a disk in the drive I went ahead and gave a command to burn to it. When it said there was no cd inside , I canceled the operation. So far so good.
    My suscpicion is that there was/is an uncompleted command somewhere - but I've no idea what would trigger the drive to remind it of this. Weird huh?
    I would like to avoid the 10.4.9 upgrade as my research doesn't give enough favorable input on the Apple Discussions pages to warrant it.
    Any other ideas what it could be?
    John

Maybe you are looking for