Belle to Play 360 volume control not in sync

When I connect my 808, N8 or C6-01 (all running Belle) to a Play 360 speaker have noticed an inconsistency in the volume control function.
Firstly let me make this easier to explain by pretending that the Belle devices all have 10 volume levels and the Play 360 speaker has 10 volume levels.
Secondly I will explain how I expect the volume controls to work and indeed how it does work on my N95 and N97 (yes I've been very thorough with my testing!):
When I set my phone (N95 or N97) volume to any number from 1 to 10 the speaker plays at exactly that volume level. If I increase or decrease the volume level on my phone (N95 or N97) then the volume level on the Play 360 speaker increases or decreses to match the phone's level.
Great so far
This bit is also great...
When I adjust the volume level using the +/- buttons on the Play 360 speaker the phone (N95 or N97) volume level adjusts to match the change. So, no matter how I change the volume the phone and speaker are always in sync, e.g. 1=1, 2=2, 5=5, 10=10.
Now we're getting to the problem...
On my Belle devices, 808, N8 and C6-01 the volume levels only sync with the Play 360 when music is not playing. As soon as I play music the levels become independant of one another.
For example: While the music is paused I can press the - button on the Play 360 to reduce the volume to level 1. I also do the same on my 808. So now both devices are at level 1. Remember, the music is currently paused. If I increase the volume on the Play 360 I see on the 808 screen that the volume increases there too. Same for decreasing volume too, both stay in sync as long as music is paused.
However, when I start the music playing and press +/- on the Play 360, although the ambient volume changes accordingly, the phone volume level remains the same. This means that even after I've got the Play 360 at max volume, I can then increase it further by using the volume control on the 808.
What you end up with is 10 levels of volume on the Belle phone and ten levels of volume on the Play 360. As long as no music is playing they adjust together. When music plays they adjust independantly.
Wow this is hard to explain. I think I'll do a video.

Here's the video: http://www.youtube.com/watch?v=cQ_3jdKaC_0

Similar Messages

Volume control not showing

In Flash CS3 I am creating an SWF for a live stream. I have
added a player control bar ( Play, pause, volume control etc) but
when I publish the SWF it does not show up. I want to be able to
mute my Flash player.
Thanks for any help.

I assume the switch on the side of the phone is in the proper position. In settings/sound make sure the slider is at max. Turn on Change with buttons in settings/sound. In settings/music make sure you have volume limit turned off or if it is on check to see hwat limit you have set so it is not too low

DV9700 Volume Controls not working after motherboard replacement

I have a HP Pavilion DV9702ea, which I've had for just over two years now. It worked absolutely fine for me in every way since I got it until about one month ago when I installed some software that required me to restart Windows. The laptop shutdown but did not restart. I tried to switch it back on but it would not work - when I pressed the power button the power light would blink for perhaps half a second but that was it. After some internet searching I ascertained that this is a symptom of a common problem with these laptops and that it suggested that the GPU had failed, which meant I needed a new laptop.
So I ordered a new laptop using the model number shown on the sticker near the RAM ports. It arrived and I installed it. Now my laptop is fully working again - all except for the volume controls. On the control panel above the keyboard, all of the QuickPlay keys (Q, DVD, previous, Play/Pause, next and stop) are illuminated but the volume control keys (mute, - and +) are not. I have Windows Vista installed with the correct audio driver and it does not respond to me pressing these keys, so it's not just that they're not lit up, they're not working at all.
I've tried everything that I can think of to fix this - as far as I'm concerned it should not be a software issue, because these keys are supposed to be illuminated from power-on, so even without a hard drive or an operating system installed these keys should be lit up. Nevertheless I've tried making sure all the audio, QuickPlay, QuickLaunch and QuickTouch drivers are up to date and have tried alternate drivers for all of them. I've checked the cable leading from the motherboard to the controls - it appears to be intact, but I even ordered a replacement just in case and that has made no difference. I've extensively Googled the problem and the most promising fix that I could find (that is repeated on these forums several times) was to power off the laptop, remove the mains adapter and battery, hold the power button down for 30 seconds to discharge any static and then power on again. I've tried that a few times and it has not fixed the problem in my case.
So I'm at a loss now. My last resort will be to return the motherboard for a replacement, but that will obviously be a lot of hassle for me as I'll have to strip down the laptop to remove it and I'll be without a working laptop for a day or so. And then, if it's not a motherboard fault, I'll have put a lot of effort into not getting anywhere. So is there anything else I should try?
Any help would be much appreciated.

I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
Try buying the ribbon cable first, it is much cheaper compared to switch panel.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Volume control not working after I plug in speakers or headphones

When I turn on my 13 inch with Mac OS X version 10.6.8 or if I restart it, my volume works perfectly. However, whenever I plug in earphones or speakers the volume will be 'stuck' on the loudest it can go. When I use the volume controls on my keyboard or the slider at the top menu bar, it will make the clicking sound as if the volume is going up or down and will show the white speaker with the volume being adjusted but the volume will stay on the loudest possible setting. Even after I unplug my speakers/headphones the volume will continue to not work. There is no red light coming from the headphone jack and since it works upon startup, I'm inclined to think it's a software issue and not a hardware issue but then again, I don't know the first thing about computers. Since this has started, I've looked online for similar problems or suggestions but nobody has had this exact same issue, but I did follow the suggestions for similar issues. I repaired the disk (I could only do it for the Macintosh but I am running bootcamp with windows on the other side but I've used it maybe once for a pc only program and have never run the internet on it so I doubt the problem is coming from that side). It repaired a bunch of stuff but it didn't fix my issue. I also reset the PRAM and the NVRAM (I don't know what this does, but someone suggested it so I gave it a shot) and it did nothing. If you have a suggestion for something I can do, please be detailed, or point me to detailed instructions because my computer knowledge is very limited but I'm willing to work to fix this. Thank you!

Make an appointment at the Genius bar at the Apple store.
Ciao.

How do I get the Play, Stop, Volume controls to appear in my embedded Flash object?

Hello,
I want to show .swf or .flv videos on my website--like
youtube.com. I want to use the standard Flash Player object
embedded in a web page, however, I cannot seem to find the exact
params that make the standard controls appear (ie, Play, Stop,
Pause, Volume, etc). I just want to show a video and have the Play,
Stop, Pause, Volume controls visible at the bottom. What do I need
to do to get these controls to appear?
Here's my current code:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
width="800" height="600">
<param name="movie" value="
http://www.sitename.com/flash/dt_flash.swf">
<param name="quality" value="high">
<embed src="
http://www.sitename.com/flash/dt_flash.swf"
quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" width="800"
height="600"></embed>
</object>
Any help would be greatly appreciated! :)
Jason

Sorry! It's AS3. A typo on my part but, thanks for answering the post. This is the correct answer that worked for me. Also, the answer came from Kglad in the AS3 forum
Assign your component an instance name (if it doesn't already have one), eg flv and in the frame that contains that component add:
flv.addEventListener(Event.REMOVED_FROM_STAGE,removedF);
function removedF(e:Event):void{
flv.stop();

Volume control not working when speakers/headphones plugged in.

When my external speakers or headphones are plugged into the back of my iMac, the volume control won't work. A "no sound" icon appears and the volume slider will not move. When I unplug speakers or headphones everything goes back to normal. All updates are current. My "Audio MIDI Setup" says, "Audio Output....Output Not Supported." Repairing disc permissions was run too. Any ideas?

Hi Paul
*First off:*
Open System Preferences > Sound and select the Output tab. Now plug in your external speakers or headphones, do you see the Device Name change from Internal Speakers to Headphones?
*If nothing:*
Then try another Account, preferably your Admin. Account if your logged into another.
*Still nothing:*
Check the settings in other third party Audio programs you may have installed?
*If still nothing:*
Reset the SMC > http://support.apple.com/kb/HT3964
+(as per the instructions at the bottom of the article)+
and
Zap the Pram > http://support.apple.com/kb/HT1379
*Then if you still get nothing:*
Take it in for service and have it checked for a hardware problem.
Dennis

Volume control not working , which database controls volume?

I have read this solution elsehwhere, but I came to the blackberry forums to see if you guys can help me up with this question.
[quote]
Originally Posted by ArtSmart
I had the same failure. You can verify that the button has physically failed by going under Options / Screen/Keyboard / Key Tone On / Save. Now you can hear every other button, even the volume down button, but not the broken volume up button.
Here was my workaround to get the media player volume back up to 50% (not 100%, but it's a heck of a lot better than zero):
1. Launch desktop manager
2. Synchronize with Outlook
3. Backup everything to a new database (not really needed, but just a precaution)
4. Restore old database (before volume got stuck at 0%)
5. Change synchronization conflict resolution options so that Outlook wins
6. Synchronize with Outlook
7. Change synchronization conflict resolution option back to "ask me what to do"
Voila. Now my media player volume is back to 50%, which is where it was when I did the last backup before accidentally ratcheting it down to 0%.
Whenever I restore a database, it always loses my Internet Browser. To get it back, go under Options / Advanced Options / Host Routing Table / Menu Key / Register Now / Ok. Unfortunately, I'm back to all the old bookmarks as they were in the old database, but I can always re-do those changes.
[quote]
Okay I Could restore an old database where the volume was at 50%, but the Desktop Media Manager also has an option to restore specific options that were previously backed up .
SO my question is, does anyone know what specific database controls the volume control? SO I won't have to do a FULL Database restore?
Thank You :smile:

Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Volume control not visible

How do you get the volume control to reappear after is no longer appears in the bottom of the screen,

If your running Windows 7, the steps are shown below:
Enable Windows 7’s Volume Icon
Right-click an empty space on the taskbar (the bar with the Start Orb and clock) and then click Properties.
Click the Customizebutton in the Notification area section of the Taskbar and Start Menu Properties window.
Click Turn system icons on or offat the bottom left of the Notification Area Icons window.
Set the Volume icon’s behavior to On and then click OKto save the changes.
Although I am an HP employee, I am speaking for myself and not for HP.
I am also CompTIA A+, Network+ and Security+ Certified
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Sennheiser headphones inline volume control not working

When using my Sennheiser in-ear headphones the volume control on the lanyard does not alter the volume on my iTouch 64Gb - why?

Hi Paul
*First off:*
Open System Preferences > Sound and select the Output tab. Now plug in your external speakers or headphones, do you see the Device Name change from Internal Speakers to Headphones?
*If nothing:*
Then try another Account, preferably your Admin. Account if your logged into another.
*Still nothing:*
Check the settings in other third party Audio programs you may have installed?
*If still nothing:*
Reset the SMC > http://support.apple.com/kb/HT3964
+(as per the instructions at the bottom of the article)+
and
Zap the Pram > http://support.apple.com/kb/HT1379
*Then if you still get nothing:*
Take it in for service and have it checked for a hardware problem.
Dennis

Xbox 360 Wireless Control not working in W7 x64

Hey all,
I have read some topics in here about issues on a Xbox 360 Wireless Control connection in Windows 7 x64 (I'm on a Dell Inspiron n5110, 6gb ram, intel core i5). Thing is, in difference to all those threads, in my devices list there ain't any "unrecognized
devices" nor anything, so all the solutions listed don't work for me.
What I have done:
1) Installed the Accesories 1.2 for Windows 7 x64
2) Plugged the receiver to my usb (it got detected by windows, recognized and listed properly in the devices and printers, as a wireless receiver)
3) Turned the controller on, hitted the sync button on the receiver, then on the control... and I get a eternal green blink around the Xbox button, which never ends nor stays in one of the quadrants.
As I don't see nothing like "unidentified device" in the device admin, I simply can't use the "update drivers" stuff. What can I do, what am I doing wrong?
Thanks in advance...

Hi,
I would suggest you to follow these steps and check if the issue is resolved:
1. Verify that the accessory is an officially licensed Xbox 360 wireless accessory.
2. Examine or replace the batteries to make sure that you have fully charged the batteries in the Xbox 360 wireless accessory.
3. Move the receiver away from other devices that could interfere with the wireless communication between the receiver and the Xbox 360 wireless accessory.
Note: Devices such as wireless routers, cordless telephones, and microwave ovens can generate wireless interference.
4. If you are using a wireless keyboard or mouse, disconnect the keyboard or mouse and reconnect the the wireless gaming receiver. Then try reconnecting your Xbox 360 wireless device to the PC.
Also, you may try uninstalling and reinstalling the drivers for controller in device manager and check if this helps.
If the problem persists, then please contact Xbox support for further assistance. Here’s the link:
http://www.xbox.com/en-GB/support/xbox360/
Please Note: Since the site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

IPhone 5s volume control not working while in doc

I have a iPhone 5s, when I put it in the doc to charge it the volume control does not work. Also when I plug in my ear buds, original to the phone, into the back of the doc, the volume stays at one level and cannot be controled as well. How can I fix this?
Thanks
Patrik

Anyone, anyone?.....Bueller?...Bueller?...

Titanium Dolby Digital - Windows Volume Controls Not Function

I am extremely happy with the Titanium because it finally elminated the 4GB Snap-Crackle-Pop issues I've been having since I owned this motherboard.
However, I've noticed that when I enabled Dolby Digital encoding over an optical output the master windows volume controls and muting do not affect the audio output at all.
Using the master windows volume controls with the analog or unencoded digital optical outputs work fine. It is only when using Dolby Digital encoding that I see this strange behavior. In-game and application-level volume controls & muting work fine; it is only the master windows volume controls that are 'ignored' when using Dolby Digital.
I'm still happy to see Dolby Digital encoding on this card, and very pleased that I'm using 4GB now without crackling in games or during music, but hopefully this Dolby Digital issue can be fixed.
Have any other users observed this odd Dolby Digital behavior?

Unfortunately (for me) the two of you are correct and windows volume controls have no effect in Vista.
Auzentech has this on their FAQ:
Q : After installing the sound card and connecting it to my surround sound system using S/PDIF output, keyboard and Control Panel adjustments to Volume and Balance either do not work or have minimal affect. Is that normal
A : With Digital Audio output, output levels are controlled by the wave volume settings. Multimedia keyboards and remote controls only adjust the master volume. The third-party application "Volume Tracker" corrects the situation by linking wave volume and master volume. Volume Tracker is compatible with Windows 2000, XP and Windows Media Center.
I also found this article:
"Another direct consequence of transmitting a compressed audio signal instead of an uncompressed audio signal (more commonly known as PCM) is that the volume of that signal cannot be modified once it has been encoded. Because the bits in an encoded signal no longer directly correspond to the volume of that signal, it is impossible to increase the volume until it is decoded. This explains why your PC cannot control the volume of your sound when you are using Dolby Digital or DTS as the output. The connected device will be the only place where the volume can be changed."
http://windowsvistablog.com/blogs/windowsvista/archi've/2008/03/04/using-s-pdif-to-send-audio-from-your-pc.aspx
So it would seem that this behavior is not only intended, but apparently unchangeable in Vista. In XP there is a utility (Volume Tracker) that can fix this, reportedly. This utility has no effect in Vista.

TS2634 Volume controls not working on the side?? Can anyone please help?

Can you PLEASE!!!!!! help me?? The volume controls on the side ofmy phone is not working. The phone rings but the ringer stays on silent. Silent switch is up. Have tried many things. Restore. Latest update. Nothing works....

The side controls will only control the ringer volume if Settings > Sounds > Ringer and Alerts > Change with Buttons is set to ON. If not the slider in Ringer and Alerts is controlling the volume. Check what level the slider is at.

Satellite L300-147- Manual volume control not working

The manual volume control on the laptop is no longer working. If I try to adjust the volume (on the right the headphone plug-ins)- I just keep scrolling. As a result, I can only watch DVD on a really low volume level. I have adjusted volume control under "control panel" to the maximum level.
Any ideas to fix this please?

Hello
> The scroll for volume control on the laptop keeps scrolling on empty (it can't reach the end)
Believe me buddy, this is absolutely normal.
I have Satellite L300 too and I can still scroll the volume control although the sound is on lowest level (I can see this in Windows sound properties).
To be honest I didnt have any notebook as yet where the volume control ends on a certain point.
Greets

Wireless Keyboard Volume control not working

Hi all
recently got a new Envy Phonext 800 050, came with a wireless keyboard and mouse, both of which work fine apart from the volume controls on the keyboard and I cant seem to find software/drivers for them that run under windows 8 ? any ideas would be much appreciated.

Hi capnchuck,
Thanks for the quick reply. I would like you to check out Wireless Keyboard and Mouse Troubleshooting it has some troubleshooting steps we can try first. You may be required to download the drivers for your specific keyboard can give me the name of your keyboard example: HP Wireless Elite Desktop Keyboard, HP Wireless Entertainment Keyboard etc.. so that I can narrow down the keyboards that are coming up with that product number. Hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Belle to Play 360 volume control not in sync

Similar Messages

Maybe you are looking for