Benefit plans do not appear in HRBEN0001 Enrollment

Hi all,
I have set up a Health plan following the standard steps (assign health plan attributes, plan options, create cost rules, create benefit program). However, when running HRBEN0001 for an employee in the same Benefit area/1st & 2nd program grouping, the plan does not show in the offer.
I also ran Configuration Consistency Check but see no warnings/errors.
Please advise what might go wrong. Thanks!
Edited by: tommyford on Apr 15, 2011 9:50 AM

As I am testing around, I set up a health plan under a system standard benefit area and it shows in HRBEN0001 (in fact, we don't need to create Adjustment reasons for this to work in case of Open enrollment).
Then I try copying this benefit area to a new one, but again under the new benefit area, no plans show for enrollment.
Can someone advise when we use Copy benefit area, what data are copied and what not? From that I think I can figure out what's wrong.. Thanks for all your help!
Edited by: tommyford on Apr 18, 2011 11:09 AM

Similar Messages

Why the benefit plan did not appear ?

Hi.
I have configure in IMG the health plan and insurance plan , then flexible administration...But when i hire or adjust reason for a new employee ,and create IT 0717 , then in ENROLLMENT i still se " Default offer" or "New hire" but in that i see no plan.......Maybe i have configured in a wrong way ..Could you show me how to make these plans appear to be enrolled ?
Is there any document that describes step by step the Benefit configuration.. ?
Thanks in advance ...

Hi Qui,
The following are the table for Eligibility Group and Eligibility Variants, You can work around with these tables along with IT 378 adjustment reason. you can create adjustment reason as IMED.
Regards
Anil.C
Reward the points if my answer helps you out.

Pension plans are not appearing under HRBEN0001

Hi All,
I have configured 3 pension plans and plan status for 2 plans are losed and one is open. I have set up everything correctly. But I am not able to see under Tcode HRBEN0001. Can anubody give me lights on this?
What I understood is closed status will not reflect via HRBRN0001. Am I right or wrong?
Regards,
Purnima

Hi Sarah,
Yes, that person is eligible for that plan whose plan status is open. But when I am going through HRBEN0001 for that category of employee, I am not able to see that plan. I checked all configuration. Everything looks like OK. Can you please tell what I am missing?
Regards,
Purnima

HR BENEFIT:dependent tab not appear

Dear Experts,
I got problem with HR Benefit Administration.
When I do the Enrollment process, dependent tab not appear.
I check in IT0021, family member was there.
at SPRO - at step "Claim Variant for Plan" I did check claim grouping
so, at "Claim Rule for Plan" I choose the claim group and add dependent cover.
my problem is when uncheck the claim grouping at claim variant for plan - dependent tab at enrollment appear.
BUT I need those claim grouping as for rule plan, but then dependent tab not appear.
how to make it appear?
is there any missing configuration?
thanks in advance
Edited by: nzworld on Oct 18, 2011 4:39 AM

Hi,
anyone got this situation?
thanks

Order plan cost not appearing in PS report.

Dear PS friends,
I have an issue in order plan cost updation ( budget report ).
Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
Checked the following
a) WBS is account assignment element.
b) Network type order appended indicator in OPSV.
c) Setting in network type parameters for " determine plan
cost".
d) WBS and order - both are showing plan cost when booked separately, but not integrated.
Can anybody help me to resolve this !
Thanks in advance
-- Sri --
Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

Hi,
In case of the maintenance order (Order Category:30)
Please check the follwoing in Tcode OPSV:
1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
2. Please selelct the appropriate controlling area.
3. Appended plan indicator has to be checked mark,
4. Assigned funds in the plan indicator has to be checked mark,
5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
Hope its useful.
Reward point if useful. Revert abck if any other issue.
Thanks..

Item billing plan lines not appearing in billing due list ...

Hello Team ,
I have one question on service contract billing plan. Contract has status released.
I have one contract which has header billing plan that is applicable at line item also.
1. At line item level billing plan two items are due for billing but in billing due list this line item does not appear. Some of the lines in Item billing plan are already billed.
Also at item billing plan there is no check (tick mark) for Header Billing Plan.
Can some one suggest what are the possible checks for item billing plan not appearing in billing due list.
Thanks ,
Nitn Patki

Hi Nitin,
Check the status of the line items.
Regards
Narayana

Planning App not appearing in Workspace

I just installed many of the 11.1.1.3 products (Workspace, HSS, Essbase, Planning, and the reporting tools) and overall everything seems to be working except that I can't see a new Planning app in Workspace. I created the app by using the AppWizard.jsp because Classic Application did not appear in Workspace even though I have full admin rights to all the products. I thought maybe if I created it through the AppWizard it would appear but I still don't see it. I can log in using the direct Planning link and all looks well from that end. Any ideas as to why it won't show up in Workspace? Thanks.
Edited by: user8269195 on Sep 9, 2009 12:50 PM

user593267 wrote:
Thanks for the post. Do we also have to redeploy the workspace web sevice as well after the reconfiguration process?
Thanks,
MarkHi you should just have to run the "EPM System Configurator" > Untick all Options > Foundation > Workspace > Select Configure web server > reconfigure.
Cheers
John
http://john-goodwin.blogspot.com/

COPA Plan values not appearing in report

Hi
I posted COPA Plan values using KEPM and line items are appearing in KE25 but no values are not being appeared in COPA line item report we created using report painter. We used KE94 and KE91.
Actual values appearing correctly in report.
Any help??

Check if you have Plan/Act indicator maintained correctly with the plan value. If it shows up in other reports, I don't see any reason why it will not show up here. I would also check other parameters entered in the report and see if any other characteristic is preventing plan values from populating.
Shail

User enrolled via API does not appear to be enrolled within Connect

Posting this here because it appears I have stumped the band over at connectusers.com...
Using the API to access our hosted account I am able to:
Login as a user (administrator or normal user)
Add a user
Change user password
List all of the SCOs that the user has access to
List the response to the report-my-training action
I am attempting to enroll a user by calling permission-update. It appears to work because the status returned is "ok". When I connect to the API as the user and call report-my-training the curriculum appears in the response. So far, so good.
Next, I accessed Adobe Connect via a web browser and logged in as the user. The curriculum I thought I enrolled the user in appears in the training catalog. The first sign of trouble is that the enrollment status is reported as "You are currently not enrolled."
If I direct the user to the curriculum using a URL like "http://hosted-account.acrobat.com/p31959044/?session=na1breezyxxxxxxxxxxxxxxx" the browser is redirected to a page that shows the title of the curriculum, but nothing more (blank white page).
What am I missing or doing wrong?

Thank you for your reply Loren. Unfortunately I don't currently have access to the remote side's crypto configuration, since they are an external entity. However, I can check in and see if I can get that info.
Hopefully this is the information that you requested:
access-list Outside_27_cryptomap extended permit tcp object 20.0.0.106 object Remote_Server object-group RemoteSite
Result of the command: "sh access-list Outside_27_cryptomap"
access-list Outside_27_cryptomap; 1 elements; name hash: 0x3a48e673
access-list Outside_27_cryptomap line 1 extended permit tcp object 20.0.0.106 object Remote_Server object-group RemoteSite (hitcnt=36) 0xce74f220
access-list Outside_27_cryptomap line 1 extended permit tcp host 20.0.0.106 host 188.1.1.69 eq 204 (hitcnt=36) 0xdd218de0
Again, thank you for your help.

Benefit - Enrollment to delete a benefit plan

Hi,
The requirement is to delete a benefit plan (e.g. DENT) from enrollment screen (HRBEN0001):
a) Is to delete a benefit plan via "Define Benefit Programs" the best way?
a) Currently, there are employees already enrolled with benefit plan DENT and have payroll run with it. Is there any impact that need to be considered?
Thanks
Nikki
Edited by: Nikki_99 on Aug 5, 2010 2:39 PM

I think the requirement probably is to exclude this plan from showing up in 'HRBEN0001' for specific benefit adjustment reasons.
If this is the case, you can remove this through V_74HB_A (for health plan as it's Dental plan). Note, this only exclude the plan from showing up in benefit enrollment; it doesn't prevent user from actually adding this in IT0168 through PA30.
You really don't want to physically remove an existing benefit plan that's either currently or previously used as this would cause inconsistency.
Rgds.

Enrollment Screen - Validity period for benefit plan

Hi,
At the enrollment screen (HRBEN0001), once click the adjustment reason, the respective benefit types and plans will be listed out. Also, the benefit plans have the "Validity period" showing as well (start date and end date).
I understand that the date is configure at "administrative parameter" and the "adjustment reason" . But I needs to have the validity end date of the benefit plan to be displayed (at HRBEN0001) based on the validity period of the plan itself from table (T5UBA). Is it possible to do that?
Thanks
Nikki

Hi Nikki,
In configuration this cannot be done. However there is some badis that allow you to set up plan records date depending of the type of plan. These badis are:
PBEN0038                       Set dates for Spending Account plans
PBEN0039                       Set dates for Miscellaneous plans
PBEN0040                       Set dates for HSA plans
For other plan types I;m afraid only the dates from administrative parameter" and the "adjustment reason" can be used
Hope this help
Sarah

Benefit plan enrollment

Hi All,
Please help me in the following :
As per my Business requirement i need to delimit a Benefit plan becuase that plan is no longer existed in their business effective form 01.01.2009. So as per their requirement i have deleted the master data records existed after 01.01.2009. Now i need to do some functional configuration so that end user will never enter the data for the "Actions" done through PA40.
This plan is not coming any actions performed enrollment. before the changes itseld this plan is not enrolling. i need to show my user that plan is not active in the enrollment for any of the actions through PA40. and note that this is "Default Offer plan".
I can delimit and closed the plan effective form 01.01.2009. Before that i have to make sure that this plan enrollment is possible if plan is
"OPEN".
Can any one help me how can i show this plan into the action.
Thanks & Regards,
Naga

problem solved

HSA Benefit Plan: Employee Contr and Employer Contr wagetype not showing up

Hi Experts,
For a couple of our empls, the Employee Contr and the Employer Contr wagetypes for HSA Benefit Plans are not showing up in the payroll log. For other empls, all is fine.
Here's what the payroll log lin running regular payroll ooks like in processing of function P0169:
=========================================================
BAdI "Evaluate Ee Contrib" implemented
Calculated contributions:
Employee contribution pre-tax: 35.00 USD Weekly
No rollover of pre-tax to post-tax contributions
Post-tax contributions start only after pre-tax limit is reached
BAdI "Check Contribution Limits" implemented
BAdI "Evaluate Er Contrib" implemented
Final result contributions:
Employee contribution pre-tax: 35.00 USD
Employer contribution: 19.24 USD
BAdI "Proration" implemented
Processing proration for 12/27/2010 - 12/27/2010 results in:
========================================================
Here no wagetype is showing up though they are getting calculated above.
Regards,
Somdeb.

First please respond to my questions.If there is wagetype is coming from the previous periods or other IT where enter for any correction ....there is a possiblity it is nullified after the BADI.
Second..The wagetype is getting dropped in the proration logic...check the dates of employee payperiod with IT169 and let me know the dates.
Third...what is parameter used for P0169 in your UBE2 schema is CHK or BEG or END..?
Edited by: Amosha on Jan 6, 2011 5:11 PM

HSA Benefit Plan: Employee Contr and Employer Contr deductions not happenin

Hi Experts,
For a couple of our empls, the Employee Contr and the Employer Contr wagetypes for HSA Benefit Plans are not showing up in the payroll log. For other empls, all is fine.
Here's what the payroll log in running regular payroll looks like in processing of function P0169 for this HSA benefit plan:
=========================================================
BAdI "Evaluate Ee Contrib" implemented
Calculated contributions:
Employee contribution pre-tax: 35.00 USD Weekly
No rollover of pre-tax to post-tax contributions
Post-tax contributions start only after pre-tax limit is reached
BAdI "Check Contribution Limits" implemented
BAdI "Evaluate Er Contrib" implemented
Final result contributions:
Employee contribution pre-tax: 35.00 USD
Employer contribution: 19.24 USD
BAdI "Proration" implemented
Processing proration for 12/27/2010 - 12/27/2010 results in:
========================================================
Here no wagetype is showing up though they are getting calculated above.
Regards,
Somdeb.

The issue has been resolved.
The Savings Plan HSAF had a co-requisite Health Plan HDP and we had to add this co-requisite plan for the empl.
Also the P0169 function had to be changed from BEG to CHK in the payroll schema which did the trick.
Regards,
Somdeb.

Missing Benefit Plan in HRBEN0001 in one client but not in another.

Hi All,
I was wondering if anyone has stumbled upon this issue where your benefits configuration are identical in three clients. I have configured two savings plans - 401K and Roth which the employee is allowed to make changes anytime. In two DEV clients, I was able to see both savigns plan in HRBEN0001 and 401K in QA but not the Roth. I've compared the configuration and the dates and they are correct (and identical).
I went back into QA and hired a new test employee and the Roth plan appears in HRBEN0001. My question is: why didn't the Roth plan appeared for the employees that were previously hired. Is there a table that needs to be activated in QA?
Your help is much appreciated! Thanks!

Hi Donna,
Could you please tell how did you resolve this issue as I am facing same problem. I have configured 3 pension plans which are not reflecting under HRBEN0001. Appreciate your help.
Regards,
Purnima

Benefit plans do not appear in HRBEN0001 Enrollment

Similar Messages

Maybe you are looking for