Benefits Combined coverage issue

Hi
I am facing an issue in US Benefits of life insurance where when the combined coverage of Basic life and supplemental life is exceeding 1500000, then the system is throwing an error u201CCondition for combined coverage limit BSCL for plan SUPL is not fulfilledu201D . From the configuration point of view, I had checked the combined coverage limit, it is correctly mentioned as 1500000.
Recently I had changed these insurance plans from Open Enrollment (OE) to Any time changes(ATC).
From then I am getting this issue.
Please provide the suggestion and advices to resolve this issue.
Thanks
Haris

Hi Gurus,
Please provide suggestion regarding to the issue I had posted.
Thanks
Haris

Similar Messages

  • 7100 i Out of dispatch coverage issue

    I have an out of dispatch coverage issue with only the BB 7100i model, tried several units here in the US border to Mexicali BAJA Mexico.
    I cross the border everyday from Calexico, Ca. to Mexicali, Mexico, Boost have coverage and all of my Iden Radios work fine, I got some BB 7100i programed the service books, all the works, etc.. The 7100i losses the PTT option while in Mexico very often and does not get back until I cross the border to the US California , since I loose the PTT option I tried using just the PTT chirp button only, then a message appears saying "out of the dispatch area, try again later" tried the PTT option with a BB 8350i and i710 at the same time with no problem what so ever, so I tried everything to make the BB 7100i work as it should with no luck, can anyone tell me why is this, or help me fix this issue?
    Any help will be greatly appreciated, Thanks.

    Actually, the thread was moved here...and this is the correct place. Hopefully someone with helpful information will come along and post.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Acrobat 9 Standard Combine Feature Issue

    Has anyone had an issue with "set new destination" appearing in the menu pulldown after combining pdf's in acrobat 9 standard using the combine feature?
    I use the combine into a single pdf feature to build manuals.  These manuals are often updated and I need to reassign a bookmark to a new page.  With past versions (i.e. version 6 which didn't have the combine feature), I was able to move to the new page, right click on the bookmark, and select "set new destination" 
    Funny thing is abobe's help files tell me to do that or go to the bookmark options icon and select "set new destination" but you can't select something that is not there.
    This only happens with pdf files that I combined using this combine feature in version 9.  I can bring up old manuals in version 9 and find this selection "set new detination" available when I right click on the bookmark.
    Any help would be appreciated
    HC88

    My mistake it is "set destination" in standard not "set new bookmark" as I orginally stated.   I see this option only when I go to a previously built book or I manually create bookmarks in version 9.  The issue I have is I don't see "set destination" when I use the "combine" (merge files into a single pdf) feature in acrobat 9 to build the book.  It seems like it doesn't recognize them the same way as building them manually. I have a friend that has Pro. He is going to run a test for me. I'll let you know how it turns out.
    He also thought it might have something to do with tagged verses not tagged bookmarks and that this combine feature maybe combining them as tagged bookmarks.  Neither one of us knows much about tagged bookmarks so we weren't sure.

  • IPhone 4S Coverage Issues

    Hi,
    If i loose service on my iPhone 4S it then will not get coverage until i reboot. This is very anoying when im travelling because rebooting an iPhone isnt the quickest process.
    So whenever my iPhone shows 'No Service' it wont search for service until i reboot.
    Anybody know any way to fix the issue or shall i go to a apple store?
    Many Thanks
    Bradley

    http://www.apple.com/uk/support/iphone/phone/
    If nothing here helps and you have tried a replacement sim from your carrier
    then off to the Apple Genius bar
    The first thing they will ask is have you tried a new sim ??

  • Advanced Benefits:Dependent Coverage Start Date

    Hi,
    I have a an employee with the following life events.
    Intially the Employee has Employee Only Option
    1) 28-Feb-2010 -- New Child --> Emp+Children --> Child Cvg Start Date --28-Dec-2010
    2) 01-JAN-2011 -- Open --> Emp+ Children --> Emp CVg Start Date -- 01-Jan-2011 and Dep Cvg Start Date 01-jan-2011
    3) 01-APr-2011 -- Marriage --> Emp+Family --> The Cvg start date of the Child is Changed to 01-APr-2011 and the Employee CVG start date also changed to 01-apr-2011
    I am curious to find why did the child coverage start date changed to 01-APr-2011 and we have added spouse only in the marriage life event and changed the
    option from Emp+Children to EMp-Family
    Thanks for any input.
    regards,
    A

    Hi Shivam,
    You have mentioned previously that Ct. is triggering the Gain Dep. LE by adding a new dependent child. This means that the person already had a life event in started status which enabled the Family Member page and allowed the user to add a dependent.
    If so, then there might be a Collapsing Logic defined between the Current LE[Say New Hire or Open] and the Gain Dependent. [I have seen this setup with most of the Ct.'s].
    So, there is a good chance that instead of the Gain Dependent, the Current LE will be reprocessed and hence is taking the setup of Current LE instead of GD.
    You can confirm the LE processed in the Current Benefits page.
    Regards,
    Aneesh N

  • ESS Benefits open enrollment - Issue

    Hi,
    When we click on the benefits open enrollment link, we do not want some of the plans to be displayed to the ess user. Is there any way to control it ( SPRO or BAdI ).
    Env - EP 7.0, ECC6.0
    Thanks,
    Ravi

    I posed the same question to an ESS consultant who responded with the following:
    "The plans presented in benefits enrollment (PZ14) and Participation Overview (PZ07) are list output from ABAP.  You can go into the program and select or exclude some of them based on certain criteria.  I've seen customers extend the Plan infotype to add a flag field to make it configurable to show, not show a given plan."
    Since specific instructions weren't given, I wouldn't consider the issue answered.
    However, I can provide the following work around:
    Due to the fact that different populations have different open enrollment period timeframes, and all populations have been configured under one benefit area...we decided to create an "Open Enrollment Adjustment Reason" for each group instead.  Thus, the Adjustment Reason permissions will only display the plans we want the employee to see via ESS.  Prior to the open enrollment period for the population, we will run the Mass Adjustment Reason report to create IT378 for all relevant employees.  The OE offer will appear as another Adjustment Reason under the Enrollment service in ESS.

  • Regd:Benefits Open Enrollment Issue

    Hi SAP,
    I have problem in Open Enrollment which is in ESS.
    We have used the Portal Navigation for designing the Navigation instead of Homepage Framework.
    When we were using Homepage frame work the open Enrollment works fine(ie) it will be highlighted when the period is opened and it will be glared when the period is closed.
    But now after changing the navigation design it is working fine when the period is open but its not getting blared or disabled when it is closed instead it gives me the error.
    I need to make it disable when the period is closed.
    Is there any configuration that I have to do.
    Please put me some light on it.
    Its very urgent.

    I posed the same question to an ESS consultant who responded with the following:
    "The plans presented in benefits enrollment (PZ14) and Participation Overview (PZ07) are list output from ABAP.  You can go into the program and select or exclude some of them based on certain criteria.  I've seen customers extend the Plan infotype to add a flag field to make it configurable to show, not show a given plan."
    Since specific instructions weren't given, I wouldn't consider the issue answered.
    However, I can provide the following work around:
    Due to the fact that different populations have different open enrollment period timeframes, and all populations have been configured under one benefit area...we decided to create an "Open Enrollment Adjustment Reason" for each group instead.  Thus, the Adjustment Reason permissions will only display the plans we want the employee to see via ESS.  Prior to the open enrollment period for the population, we will run the Mass Adjustment Reason report to create IT378 for all relevant employees.  The OE offer will appear as another Adjustment Reason under the Enrollment service in ESS.

  • Benefits Dependent Coverage

    Hello All,
    I have done the configuration of all Benefits Plans. Health, Insurance, FSAs and Savings plans. I have configured dependent coverage options at plan level of each plan.
    But I have not configured anything in "Dependents/ Beneficiary Eligibility" under flexible administration node.
    I am able to enroll employee into Benefits Plans. But am not able to enroll dependents/ beneficiaries.
    Can some one tell me where am I stuck?
    Appreciate timely help.
    Namrata

    Hi,
      For Health Plan, it is Dependent and for Insurance & saving plan, one should configure beneficiary..
      From seeing you question and dependent coverage , i guess you are talking about the Health Plan  ( EE, EE1, EEFamily )...
      For health plan, one should configure...
        a) benefits>Plans> Health Plans---> Define Dependent Coverage Options
           where you specify EE, EE1, EEFamily... etc..
        b) benefits>Plans> Health Plans---> Define Minimum and Maximum number of Dependents...
           where you tie min and max number of dependents and link to subtype in infotype 21
        c) Benefit->Flexible Administration->Dependent/Beneficiary Eligibilty--->Define Dependent Eligibility Rules 
           where you define the Age range and restriction for student and disabled... ( typically dependent child is eligible upto age 21.. For student they allow upto 25... and there is no restriction for disabled child and it also varies state to state ... you can obtain this info from your business super user )
    Thanks
    Anand.

  • Vendor consigment process combined goods issue to cusotmer

    Hi, All,
    I have some questions on the consignment process.
    One Scenario: For the MM consgiment without delivery to customer. I listed some steps with my questions below:
    1. Create Consigment info record. Is it necessary?
    2. Create consignment purchase order Item category K. Is there any special setting?
    3. Goods receipt against PO. What's the movement type here? What's the movement type 201 K and 231 K used for? If 101, is it goods receipt to own stock?
    4. No invoice verification done, but settlement is done through MRKO transaction. Is it paid consigment fees to vendor by this t-code? What's the accounting happened?
    Two Scenario: For the MM consgiment with delivery to customer. I listed some steps with my questions below:
    1. Create Consigment info record. Is it necessary?
    2. Create consignment purchase order Item category K. Is there any special setting?
    3. Goods receipt against PO. Placed in own inventory with a stock category of K. What's the movement type here? what means stock category K?
    4. Create normal sales order.
    5. Must remove the K from the inventory before a batch can be selected on the delivery-
    a. MB1B- 301 transaction is used to removed the K and to reference the delivery number
    b. Depending on if location is inventory managed an LU04 may be necessary to complete the movement off of K .
    Why movement type 301 is here?
    5. Create delivery and PGI (The quantity is different when you do goods receipt for this material)
    6. Invoice to customer
    7. Payment for that Purchase Order thrgouth MRKO. The issue is only paid to vendor based on the quantity which sent to customer, not on goods receipt. How it can be achieved?
    Three Scenario: Is there any process create MM consgiment with delivery directly to customer? What's the process, movement type and what's the difference?
    Thank you very much in advance

    Hi,
    1. Create Consigment info record. Is it necessary?
               Yes, for consignment process, inofrecord is must, price will be picked only from inforecord, you can't enter price in PO.
    2. Create consignment purchase order Item category K. Is there any special setting?
               Item category K is standard for consignment PO.
    3. Goods receipt against PO. What's the movement type here? What's the movement type 201 K and 231 K used for? If 101, is it goods receipt to own stock?
    Movement type is 101, 201k & 231k is for goods issue.
    Its not good's receipt ot own stock, its goods receipt to unrestricted stock with stock indicator as K, later you can take to your own stock through 411k.
    4. No invoice verification done, but settlement is done through MRKO transaction. Is it paid consigment fees to vendor by this t-code? What's the accounting happened?
      For example If you manage material A of vendor X as consignment stock at a price of $ 10 /piece.
    When 100 pieces are withdrawn for consumption, the system makes the following
    postings when the withdrawal is settled:
    During Withdrawal          
    Consumption account                               1000 +
    Liabilities from consignment stores            1000 -                
    During Settlement
    Liabilities from consignment stores   1000 +
    Vendor account                                1000 -
    For your scenario 2, follow the same steps as mentioned above and do the goods issue directly from consignment stock.
    You can do the settlement to vendor only for the stocks that you consumed.
    Regards,
    Prabu
    Edited by: prabu krishnasamy on Apr 25, 2009 12:13 PM
    Edited by: prabu krishnasamy on Apr 25, 2009 12:14 PM

  • Combine Files issue

    Why do my PDF bookmarks get removed when I combine files in Adobe XI? I have checked the options and the "always add bookmarks to Adobe PDFs" is selected. The original PDF files do have bookmarks.

    Ok I got an update this morning and I am seeing more of my bookmarks (one from each individual PDF) however it doesn't bring over the detail? Any additional help?

  • Coverage issues in Northern Ireland

    My mother and uncle are experiencing very sporadic coverage where they live outside Castlederg in County Tyrone, NI. Previously their phones worked perfectly but over the last couple of weeks only about 1 call in 10 gets through. All their getting is 'call failed'.Anyone else having problems?

    According to the status checker http://status.o2.co.uk/ there is a mast down in that area. If you put in the full post code it will give you more information, but it appears that O2 are aware of the problem. They might want to try using the TuGo app, which might help until the problem is resolved: http://www.o2.co.uk/apps/tu-go

  • How can I get help with coverage issues at my home?

    My coverage is poor at my home.   Is there any way to get help with this?   Thanks.

    You can try a Samsung network extender ($249) which uses a high speed modem connection, or a signal booster from elsewhere ($250 and up) and that might help.

  • Mac oc 10 combined update issues

    I have updated my software to snow leopard, then checked for update, but when I update the Mac OS 10 combined my computer freaks out

    Is your data backed up?
    How full is your hard drive and how big is it?
    Did you repair permissions?
    Define freaked out.  Does it ask you to restart with four languages?  Does audio not play on all applications?
    Do some applications just quit before even opening?

  • Data coverage issues

    My wife and I have been experiencing issues with our data connection at home.  We will see our connection cycle from 3G to 4G to 1X without moving.  As it cycles, we will see a delay where we basically have no connection at all, as it tries to switch. This appears to also cause an increased battery drain.  We use a Samsung Galaxy S4 and Samsung Galaxy S4 Mini.  We are in the 38135 area code.  I do not see these problems outside of our home neighborhood.  We have had this issue both indoors and outdoors.  Any suggestions?

    We have seen this issue get progressively worse over the last month.  It
    used to be intermittent, and now we see it daily.  It does not seem limited
    to a particular app. We have seen it with texting as well, where we
    received failed to send messages.  We have not seen any other messages than
    that.
    On May 28, 2014 2:41 PM, "Verizon Wireless Customer Support" <

  • Show combined coverage between floors on Prime 1.2

    Hi,
    I wold like to know if it is possible to show in one the floor map the coverage of Acess Point in the next level, in my case I have floors 7 and 8 where some APs in the floor 8 covers areas in the fllor 7 and viceversa, but I can only the signal of the APs in the floor.
    thanks for yur help

    I don't think that is possible. The best way I found to do this does not give you an image view of the coverage but you can look at how the AP's on that floor hear their neighbors based on RSSI.
    On your map click an ap and then navigate to the desired band and click the link on the bottom of the popup window "View Rx Neighbors"

Maybe you are looking for