Bengali Unicode display distorted last 7 days

For last 7 days, Bengali Unicode display failed. Bengali words use compound alphabets. They are getting broken up & displaying each alphabet separately like roman alphabets. No such problem in MS Word, Excel etc., or even when using Internet Explorer.
I have stored 'Application Basics'. Can be emailed, if required

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
<hr>
Also:
*[https://support.mozilla.org/kb/remove-recent-browsing-search-and-download-history Clear recent history]
*[https://www.mozilla.org/en-US/plugincheck/ Plugin check]
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

Display a metric differently only on last day of the month.

Have a Daily transaction fact where unit cost of product is stored at a day/part num /business unit level.
When we drag and drop date column and unit cost in the report like below we will have
Date      cost
Sep29     $10
sep30     $12
Oct1       $12
Oct2       $14
..........ans so on
The source sustem program runs on last day of the month around 8pm for setting up cost to reflect on 1st of every month
But the nighly OBI load ( Runs at 2am every day) when incrementally updating Sep30 data picks up $12 from the erp and populates in OBI.
But actually speaking, on Sep30 the cost was $10.
There is no way of running the ERP program to run afer OBI load. Hence we need an expression in the RPD (not answers) saying
when last day of the month (any month) the standard cost must be a previous day value.All other days the same value should be returned.
Is this possible without impacting report performance ?
So, when we drag and drop date and cost value the above report should change as
Date        Cost
sep29     $10
sep30     $10
Oct1       $12
Oct2       $14
Oct30     $12.5
Oct31     $12.5
Nov1      $13.5

You can achieve the above requirement for current month alone with below steps:
The solution requires to have a union report
First part of the report will have Date and Cost fields with a report level date filter, Date NOT IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))
Second part of the report will have Date and Cost fields with a report level date filter Date IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))In the second part of the report,
Change the column formula for Date to display only Current_Date
Change the column formula for Cost field with FILTER(Cost USING Date = Current_Date-1)
Pls mark if correct/helpful.

I dropped my iphone 3G last day and soon after the display became very dim and it still remanins the same..Could anyone pls help with a solution? Should I change the display or is it a minor damage?

I dropped my iPhone 3G last day and soon after that the display turned too dim and it still remains the same.
Could anyone help me with a solution?
Should I change the display or is it a minor damage??
Thanks for your support

sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

Apple Podcast app won't display past episodes of The Rachel Maddow Show. Does anybody know why you can only listen to the episode from the last day, and then it disappears?

I love the Rachel Maddow Show but rarely get to watch it on TV. So I rely on the podcasts to listen to every day. I've been using Stitcher but Apple's more recent Podcast app has much better functionality (downloading episodes to listen to on the subway & plane, for instance). However, for some reason (and it appears to only be TRMS podcasts), the Apple Podcast app ONLY displays the last episode. For some reason, each day, the last episode disappears from the app.

Same here! Older episodes don't necessarily disappear as soon as new ones come in; sometimes I have a few episodes on the iPhone, and can listen to them normally. But then I'll look later, and all but the latest will have disappeared. I'll have to start paying attention to discover what triggers the wipe; my guess is that syncing with iTunes does it, but I don't know yet.
Whatever the cause, it's odd. I thought that perhaps queued episodes would stick around if I partially listened to them (thus ensuring that they get actually downloaded, I'd think), but partially-viewed episodes and unviewed episodes both disappear. I can understand that an episode that never got downloaded might become unavailable after a day or few, but why would one already downloaded get automatically erased?
It's also worth noting that I don't have the problem in iTunes on the Mac. Episodes there stick around in the normal fashion. The problem is just on my iPhone, and just with this one podcast.
If anyone knows what's up, please tell!

Successive dates with last day of that month being added to succesive date

Hi ,
I have a piece of code that displays the succuessive dates from the given date to tilll date with a date interval of 30 days. My requirement goes some thing like this. since the given date is '26-nov-08' the next successive date should be the number of days in nov(30) added to '26-nov-08'. that will be around 26-dec-08. For this date it has to add the number of days in December(31) to '26-dec-08' and that turns out to be '26-jan-09'. and this must go on till date.
In the below code i have used 30 for the interval of 30 days but the interval has to the last day of the successive date's month( for dec the interval has to 31 and for january the interval has to be 31 and for february 28)
select to_date('26-nov-08', 'dd-mon-yy') + (level - 1) * 30
from dual
connect by level <= trunc((sysdate-to_date('26-nov-08', 'dd-mon-yy'))/30 )Please advice

hi ,
the query sent by you is correct and could it be in corporated for this query :
SELECT TRUNC(inst_due_date) + (LEVEL-1 ) * (ilpa_term_type),iloan_code,LOAN_AMT,FEE_AMT,
LOAN_DATE,LOAN_STATUS_ID
FROM (
SELECT inst_due_date,sm.iloan_code,LOAN_AMT,
FEE_AMT,
LOAN_DATE,
LOAN_STATUS_ID,
decode(sm.ilp_term_type, 26 ,14,24,15,12,(select to_number(to_char(last_day(inst_due_date),'dd')) from dual)) as ilpa_term_type
FROM ST_IL_SCHEDULE sc,ST_IL_MASTER sm
WHERE sc.iloan_code = sm.iloan_code
AND sc.inst_num = (SELECT MAX(inst_num) FROM ST_IL_SCHEDULE b WHERE b.iloan_code = sc.iloan_code)
AND sc.iloan_code =123456789)
CONNECT BY LEVEL <= TRUNC((TRUNC(SYSDATE)-TRUNC(inst_due_date))/(ilpa_term_type) )
Here we are using the decode concept if ilp_term_type = 26 then 14 but we need to implement the code of adding the number of days to that month in place of this code :
select to_number(to_char(last_day(inst_due_date),'dd')) from dual:
Please advice

Get First and last day of Month..

Hi Friends,
I am trying to fetch First and Last day of a month and would like to implement that in the following code:
SELECT COALESCE(Date_A, Date_B, Date_C)
FROM dual
Here Date A and B are in Format of MM DD YYYY (March 14, 2008)
and Date C is like MM YYYY (March 2008)
How can I get the Date_C as March 1, 2008 OR March 31, 2008 format if Date A and B are NULL ?
Thanks!
Edited by: user11095386 on Apr 23, 2009 10:45 AM

Hi,
In my earlier message, I thought that you were starting with strings like '03 12 2009' and that you wanted to display them as 'March 12 2009'. If what you have is just the reverse, then just reverse the format strings in my first message. Add a comma, if you want one, in the appropriate format string.
I believe this is what you want:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_C, 'fmMonth YYYY'),    'MM DD YYYY')
         )Notice how, on the 3rd line, TO_DATE is called without DD in the format string:
TO_DATE ( Date_C, 'fmMonth YYYY')When you do this, the day defaults to the 1st of the month, so this is all you have to do to convert the VARCHAR2 'March 2009' to the DATE 01-Mar-2009.
If you want the last day of the month, not the first, when Date_C is chosen, then use LAST_DAY:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( LAST_DAY ( TO_DATE ( Date_C
                                          , 'fmMonth YYYY'
             , 'MM DD YYYY'
         )

Dynamic Variable for last day of month

Hi all,
I have created one report where in YTD is calculated based on stsyem date. NOw in this report the cal month is in row thus displaying data month wise. But i need one key figure which giving the last day vaue of every month that are displayed in YTD i.e this is based on cal day. Thus the report layout is as follows:
if report is run in mar 2007 then it should display:
calmonth            key figure due amount
Jan 07                this should show due value on last day of jan 07 (i.e 31st jan 07)
Feb 07               this should show due value on last day of feb 07 (i.e 28th feb 07)
Mar 07               this should show due value on last day of mar 07(i.e 31st mar 07)
customer exit variable can give me only one value at a time. How can I make it dynamic to take last day value of every month as per cal month. Could anybody explain me if worked on any such issue.
If there is some how to paper kindly mail me at my email Id : [email protected]
thanks in advance
Regards,
Wrushali

Hi,
We can assign multiple single values to the customer exit.
So in the Query take CALMONTH in rows.
And take your KF in column with Customer exit variable restriction on CALDAY.
So in the code of this Cusotmer exit varible, from the Current date find out the year of the current date and then assign those 12 required days to this variable.
With rgds,
Anil Kumar Sharma .P

Dynamic variable to get last day of month

Hi all,
I have created one report where in YTD is calculated based on stsyem date. NOw in this report the cal month is in row thus displaying data month wise. But i need one key figure which giving the last day vaue of every month that are displayed in YTD i.e this is based on cal day. Thus the report layout is as follows:
if report is run in mar 2007 then it should display:
For calmonth       key figure due amount
For Jan 07           this should show due value on last day of jan 07 (i.e 31st jan 07)
for Feb 07           this should show due value on last day of feb 07 (i.e 28th feb 07)
for Mar 07          this should show due value on last day of mar 07 (i.e 31st mar 07)
customer exit variable can give me only one value at a time. How can I make it dynamic to take last day value of every month as per cal month. Could anybody explain me if worked on any such issue.
If there is some how to paper kindly mail me at my email Id : [email protected]
thanks in advance
Regards,
Wrushali

Hi,
U can use FM : SLS_MISC_GET_LAST_DAY_OF_MONTH to get the last day of the month by passing the date/current date.
Thanks,
Debasish

Displaying privious 7 days and net 7 days link in jsp

hi
i am using jsp
in that jsp i vant display only last 7 days details.
i am getting all values in database and stored in to an arraylist.
in that arrylist date also onthing.
according to the date i have to display the 7 days list.
for that vhat i have to use.I dont know.
but it is needed very urgent.
anybody knows help me
thanks.

first, you really need to learn to express yourself more clearly - e.g. learning better english. I have no idea what you mean ...

Does anyone have problems with sending iMessages not depending on devices the last days, too?

We have 4 iPhone 4 iOS 5.1.1 and a MBP Early 2011 OS X 10.8, and there are problems sending iMessages on any of these devices the last days.
Just the red ! and "Not send" appears. Sometimes the messages is send regardless, but mostly not!

Hello
I agree with the user above. I think you have to change the power plan. If you surf in the Internet or write something in Word just switch to Power Saver power plan. This power plan will save a lot of battery power and also reduce the display brightness to enhance the battery life.
Furthermore here is an interesting article about the power management features of Windows:
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm

Default iCal Display to Current Day/Month?

Whenever I open iCal on Yosemite 10.10.1, it by default displays the last month/day I was viewing when previously exiting the app. Is there any way to have iCal display the current day/month by default at launch?

In case anyone else is looking for a solution to this, I'm come up with a temporary hack. It is a shell script that clears out the most recent calendar view, which results in the Calendar app opening to the current day/month. I've setup a crontab job to run the script every 10 minutes. It's not a perfect fix, but it does the job just fine.
The script/terminal command:
/usr/bin/defaults delete com.apple.iCal "CalFirstVisibleDate"
To install a crontab job which runs the script periodically (every ten minutes in this case), insert the following line into your crontab config (run crontab -e from terminal):
*/10 * * * * /usr/bin/iCalDateReset.sh
This assumes that you have installed the script as /usr/bin/iCalDateReset.sh

2 months Before Last Days

How to create Previous two months last day date in OBIEE?
Example:
If I am in August, 2010, then
Last two Previous Month(Jul 31, 2010) supposed to be display.
Edited by: Welcome99 on Sep 3, 2010 1:55 PM

You said two different things, if you want "previous two month's last day," then in your example, that would be June 31, 2010. The code below describes this.
TIMESTAMPADD(SQL_TSI_MONTH,-1,TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))
(For September 2010, this will give you July 31, 2010)
However, if you meant July 31, 2010 should display if "this month" is August 2010, then you meant "previous month" not "two months ago." The code for this is below:
TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE)
(For September 2010, this will give you August 31, 2010)
Test both and see which one you are asking for.

How to display the last value of a field in a group in the group header

I need to display the last quiz score from a group of quiz scores as part of the header of a group of units (the quiz score values are in the detail record). I can not use the group footer, which would be the natural place to find the last value. It must be in the group header because there will be a subsequent group within the unit group. In other words, the grouping is as follows:
Unit Group Header (Display last quiz score in unit)
SubUnit Group Header (Display other detail summaries)
Detail Record (including quiz score)
SubUnit Group Footer
Unit Group Footer
While there is a minimum/maximum summary function, there is not a first/last function.
Fuskie
Who is constantly amazed at the ability of users to request report features that are not easily implented through Crystal Reports...

Hi Fuskie,
One suggestion to display the last quiz score in the Group Header, other than what had already been suggested, will be to use a linked subreport in the Group Header. It is not an efficient way to display the information, but it could do the trick.
Another suggestion will be to insert a subreport in the report header, then store the last quiz score in an array for each group, then share it with the main report and display the values in the appropriate group. In this way it will only connect twice to the data source, one for the main report and once for the subreport, instead of multiple connection for each group.
Finally, the most efficient way will be to have this value calculated on the database side using a command object or a stored procedure.
Patrick

Defining last day of previous month in ABAP

All,
I am a BW guy and hardly know ABAP. I have a requirement where I have to calculate last day of previous month and use it in the routines of the transformations.
I have decided to define the Last day of previous month in Start routine and then use the global variable in Transformations to calculate further.
The logic that i have used is outlined below.
         Define G_DATE in global declaration for further use in Transformations.
In the Routine section,
        Assign G_DATE to SY-DATUM
        G_DATE + 6(2) = '01' (Replace last to field of date with '01' to establish first day of the current month)
        G_DATE = G_DATAE - 1 (To get to last day of previous month)
My dilemma is to implement this in ABAP in Start routine of transformations. Please include the exact ABAP code that would be needed in Declarations and Routine section.
Thanks in advance.

Hi..,
Go with the function module: LAST_DAY_OF_MONTHS
So, Just determine the last month from the sy-datum and then use above function module and pick the last date of the month.
Thanks,
Naveen Inuganti.

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!!

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!! That's wierd because I didn't download any app or anything else since my last backup and on the other hand about 3000 pictures are gone, how come there is not enough space left! I also check my usage on my phone and it shows that i have about 7.0 GB pictures!!! BUT my photos is empty! I want my picture back on my phone any solution anyone?

Thanks for your reply!
I just called the guy who changed my LCD and asked him what happend, he said there were no pictures on your phone when you gave it to me! i know he is lying tho!
My apple warranty is over and I have to pay them to get some help over the phone!

Bengali Unicode display distorted last 7 days

Similar Messages

Maybe you are looking for