Best 23" LCD Monitor Under $150

I'm looking for a 23" LCD monitor. Any recommendations. I'm not looking to spend any more than $150-$170. I'm not very flexible on the price. Thanks in advance!
Best,
Coander15

Microcenter typically has decent (maybe not best, but decent) prices and a good selection. For $170 and lower, not much there ...
http://www.microcenter.com/search/search_results.phtml?sortby=pricelow&N=4294966 896%2B116

Similar Messages

DVD project, best LCD monitor, 24 inches, 500$ ?

Hi Everyone!
I am a new to video editing and I am trying to make a DVD. That is no action movie (It is a tutorial) but it is still a serious project.
I would like to buy an LCD monitor that will allow be to do a decent job. I am not looking for these 8,000$ screens that are clearly out of reach for my wallet...
I would like to be above 24 inches (29 is better).
AND under 500/600 $.
According to your valuable knowledge, what is the best compromise/deal out there?
Thanks a bunch.
Guillaume.

Man I wish I could steer you in the right direction, but 500-bucks doesn’t go very far in the ‘decent’ quality display market. This is especially the case in the 24+ inch offerings. I’m running the very first ACD 22-inch model on my 2009 MacPro with decent results but it did cost $5k back when it came out a decade ago. If you could find one like mine, it should go for around 300-bucks. When I do buy a new display later this year, it will be the LaCie 324i and not the 27-inch ACD.
Message was edited by: Digital Dude

32" LCD Monitor - Best Resolution???

Hello all -
I just bought an Olevia LT32HVE LCD monitor to use with my G5. I'm wanting to find the best resolution setting so that it won't be horizontally whacky, yet still a good amount of real estate on the screen. At the recommendation of a friend who has a 42" monitor, I downloaded Display ConfigX so that I could change the default settings. After registering and installing, I changed the resolution from 1280x1024 to 1280x720 as my friend suggested. The resolution now LOOKs OK, but it's a bit large for my taste. I'd like to get a bit more real estate on the screen by making the overall image more condensed. The LCD manual says that it's highest resolution is 1366x768, but when I tried that, the monitor blanks out (to blue) and says the rate is not supported. Probably has something to do with the refresh rate as well? I then have to hook up a second monitor just to get the large one to come back (viewing-wise).
Any suggestions on some resolutions that this LCD monitor will be able to use? Or am I missing a key factor?
Thanks -
G5 Dual 2.0Gig Mac OS X (10.3.9)

I was able to get the monitor to work at 1360x768 @ 60hz, but it looked a little rough around edges. Looks better at 1280x720 in terms of clarity and sharpness. But it's still the exact same size (at least, viewing-wise) as 1280x720.
Is there any way to get more real estate happening? Even though it's not horizontally crazy now, it's overall still very large.
Thanks -

Dust speckles under the LCD monitor screen

Hi,
I have a Canon Rebel T3i and have had it for a year and a half.I love it. However, lately I've noticed several speckles of dust under the LCD monitor screen. it's not affecting my pictures but is kind of distracting when i'm looking at the pictures on the monitor. Anyone else familiar with this problem or know what I can do about this?
Mary

"... picture and is only on the display ..."
Boy you have throughly confused this ol'boy. What exactly is the dislay? Are you talking in the view finder? Are you talking the LCD screen on the back of the camera?
It is easy to get dust in the view finder but, I think, impossibile to get dust under the LCD display.
If you are talking the view finder, get a Rocket Blower. The rest are junk.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Best wireless speakers for TV under $150.00

I'm looking to add wireless speakers for my HD TV for under $150.00. Can anyone give me some ideas? I'm looking at many products out there, but, once you start looking, they all have their own pros and cons and then they start looking all the same.............help?

I would just get a soundbar to go right under the t.v. rather than trying to fit wireless into your budget.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Best way to connect iPod to LCD monitor?

Hello,
I wish to hookup my 5G iPod to a LCD monitor to display a slide show.
I know that some LCD's have RCA inputs (the yellow one) or S Video inputs and can thus go straight from the iPod. But many economy model LCD's do not have these.
So how can I hook up my iPod 5G/Photo or Video to a LCD which only has a VGA input?
Thanks!

Hi! I have a 2008 toyota camry and had to change my Aux connection for my 2nd Gen touch. All sound for the AUX, I believe comes from the connector not the 3.5 jack. The 2nd gen does not support the old firewire charging, so some of the third party cables will not charge a 2nd gen touch. Check this one out.
I bought this one, though the price was a little steep $49.00
http://www.griffintechnology.com/products/autopilot

What is the best way of monitoring HD content in FCP?

I hope to get the Mac Pro listed below, What is the best way of monitoring my HD edit from FCP?
Can I output to a HDTV, or is a computer monitor better?
Do I need a capture card to output the signal, or is my below system adequate? i don't need one for capturing as i have will be using a Panasonic AG-HVX200 with P2 card, Can i use this camera to output to a TV/Monitor?
Message was edited by: calihal

Well, given your situation, the best option is the Matrox MXO and Apple Cinema Display. I have a full review here as to why it is a good solution.
http://library.creativecow.net/articles/ross_shane/MXO.php
This will cost you $995 for the MXO, and $900 for the Apple display. So under $2k. The other options are more expensive. Broadcast quality HD LCDs start at $3500. And other capture cards range from $295 (decklink Intensity) to $3500 (AJA and Decklink). And HDTV will still require a capture card, like the Intensity with HDMI out, but won't be suitable for broadcast quality. It will, however, be perfectly fine for seeing what your HD footage looks like on an HD set that most people will have in their homes. So I take back my initial statement and say that if you have a tower, the Intensity and HDTV is your best option...if you aren't needing full broadcast quality. If you just need to see what it looks like.
Shane

LCD monitors - are HD better?

I'm shopping for an LCD monitor my desktop PC. Some monitors say HD and some don't. Is HD better? If so how? Is it the contrast ratio that is better for HD, or does HD mean only the screen is wider? I don't see much difference between the HD and non-HD Dell's. For example, the Dell S1909WX 19" non-HD and Dell S2009W 20" HD both have a contrast ratio of 1,000:1. But the 20" HD is 1600 x 900 while the 19" is 1440 x 900.

The HD is going to offer a slightly better picture quality because of the increased resolution, that is about it.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

Best practice to monitor 10gR3 OSB performance using JMX API?

Hi guys,
I need some advice on the best practice to monitor 10gR3 OSB performance using JMX API.
Jus to show I have done my home work, I managed to get the JMX sample code from
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/example.html#wp1109828
working.
The following is the list of options I am think about:
* Set up: I have a cluster of one 1 admin server with 2 managed servers, which managed server runs an instance of OSB
* What I try to achieve:
- use JMX API to collect OSB stats data periodically as in sample code above then save data as a record to a
     database table
Options/ideas:
1. Simplest approach: Run the modified version of JMX sample on the Admin Server to save stats data to database
regularly. I can't see problems with this one ...
2. Use WLI to schedule the Task of collecting stats data regularly. May be overkill if option 1 above is good for production
3. Deploy a simple web app on Admin Server, say a simple servlet that displays a simple page to start/stop and configure
data collection interval for the timer
What approach would you experts recommend?
BTW, the caveats os using JMX in http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/concepts.html#wp1095673
says
     Oracle strongly discourages using this API in a concurrent manner with more than one thread or process. This is because a reset performed in
     one thread or process is not visible to another threads or processes. This caveat also applies to resets performed from the Monitoring Dashboard of
     the Oracle Service Bus Console, as such resets are not visible to this API.
Under what scenario would I be breaking this rule? I am a little worried about its statement
     discourages using this API in a concurrent manner with more than one thread or process
Thanks in advance,
Sam

Hi Manoj,
Thanks for getting back. I am afraid configuring aggregation interval from Dashboard doesn't solve problem as I need to collect stats data of endpoint URI or in hourly or daily basis, then output to CSV files so line graphs can be drawn for chosen applications.
Just for those who may be interested. It's not possible to use SQL to query database tables to extract OSB stats for a specified time period, say 9am - 5pm. I raised a support case already and the response I got back is 'No'.
That means using JMX API will be the way to go :)
Has anyone actually done this kind of OSB stats report and care to give some pointers?
I am thinking of using 7 or 1 days as the aggregation interval set in Dashboard of OSB admin console then collects stats data using JMX(as described in previous link) hourly using WebLogic Server JMX Timer Service as described in
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jmxinst/timer.html instead of Java's Timer class.
Not sure if this is the best practice.
Thanks,
Regards,
Sam

New LCD Monitor Blinks On and Off

I just purchased a new 22" Visionmaster LCD monitor, connected via digital cable to my ATI Radeon 128Mb video card.
However, it tends to switch OFF to a black screen, and after about 5 seconds it comes back on. The screen displays the word DIGITAL in the upper right hand corner.
Why is this happening, and what can I do to avoid it?
It doesn't seem to like using the digital cable. It works fine using the standard VGA cable, however.
Can anyone comment on this? Is this particular card not compatible?
Thanks!

Hello! Look in your system prefs under the screen saver and see if a "hot corner" is set. It sounds like the mouse is trying to trigger a screen saver or the "display slep" is set to only a few seconds. I've seen this type of behavior with my Dell screen and it's something I'm triggering with the mouse. Tom

External display HD LCD monitor vs HD LCD TV ??

Hello All
I'm needing to up-grade me second display and, have been shopping around.
In my shopping I'm getting mixed thoughts, I finding HD monitors and HD TV's so, I'm hoping somebody can point me in the right direction, I'm finding HD monitors in the area of $200. but, all the HD TV's $300. + , is there any real advantage of one over the other ?
I know just going with a standard LCD monitor would not be a good option, it's the HD monitors
that added to my future purchase confusion.
Thanks for any advice and or recommendations

They will probably both do as monitors. The Acer is a Computer Multisync Monitor, claiming to have a full resolution of 1920x1080. It is probably a progressive scan device, with some image processing on board, since they claim "Max. Refresh Rate 60Hz" on the Acer web site, so if you'll preview interlaced video on it, it may have the artifacts associated with standard poor or nonexistent de-interlacers. But it maybe o.k., specially if you are going to output most of your work for the internet, true Multisync Monitor maybe a good thing.
The Samsung is almost a TV set. It appears to be a 1680x1050 monitor. The bells and whistles appear to be associated with the HDTV tuner. As an ATSC tuner, it will have to tune the standard US ATSC channels and decode the standard 18 ATSC formats, including 640x480i30, 704x480i30/p24/p30/p60, 1280x720p24/p30/p60 to 1920x1080i30 and 1920x1080p24/ p30. But all this is converted into the monitor native 1680x1050xwhatever scan rate. From the HDMI inputs it will probably depend on drivers running on the graphics card on the MAC. Make sure that they have MAC drivers for this one, often they have just Windows drivers for these monitors.
I have a 26" Samsung, without the tuner and speakers, as my second monitor, to preview TV destined footage. It's resolution is 1920x1080, and it does an excellent job to show any artifacts that would show on TV.
I would recommend seeing the inputs before ordering the monitor on the WEB, because the most important characteristics are usually unavailable reading the specs. Also check about MAC driver availability.
Best of luck.

FrameMaker and LCD Monitors

Hello,
Just wanted to get your thoughts/opinion(s) as writers in using FrameMaker on LCD monitors. Specifically, I've used word processing and desktop publishing programs on CRT monitors for years. I've never had any problems whatsoever. Recently, my employer provided me with a 20 inch widescreen LCD monitor. I'm now having a difficult time with it because of the higher resolution (e.g., headaches and the like). As you all know, a lower resolution only distorts or stretches desk on LCD monitors (which is why I guess I've avoided these monitors for so long). Please note, I have bad eyesight and wanted to see if others may have ideas to address this issue. I've given the monitor two weeks and things haven't improved. I'm just concerned/frustrated because I know the world is going in the direction of LCD monitors.
For a solution, I've thought about a square like LCD monitor; maybe at 17 inches to address the problem. But I'm wondering if I'll still be at the mercy of the native resolution. Just to let you know, I've tried all the display scenarios to address the problem (i.e., appearance, settings, dpi) without success. Just miss the 800/600 resolution I had in the past due to my bad eyesight.
Any ideas or thoughts are most appreciated. Thank you very much for your time.
Paul

Paul...
Here are some ramblingthoughts on your issue. They expand on the good advice you've already received, and thus do not dispute what others have said.
Make certain your drivers for the graphics card are the latest and greatest. This is the first step you should take. You probably have already done that. If not, go do it. But check the next paragraph first.
If your graphics card has a DVI output, by all means use it. If it doesn't, opt for a different graphics card, preferably one with two DVI outputs, known as a dual-head graphics card. I address this again below.
Life is too short to drink cheap wine. It's also too short to spend a professional career working with inadequate computing resources, especially when you consider the cost of the capital outlay versus the salaries and the wasted time fooling around trying to make things right. If your employer has artificial limits on spending, go make a business case for better gear.
You already seem to understand the concept of the monitor's native resolution. High resolution monitors are best for image processing, when programs like Photoshop are used to edit photographic images. For text-based work, they're the wrong way to go, as you've discovered. Part of the problem is that many web pages and all operating systems seem to be stuck with a one-size-fits-all set of icons, menus, page sizes and the like. With Windows, you get two choices of text size, but those choices don't apply to all text instances and only in the operating system, not in the applications that run on top of the application. So driving a high resolution monitor at its native resolution results in tiny text, icons and the like. I get some email messages that I cannot read because the very popular marketing company that creates them uses what must be 4 point typefaces.
I have dual 20.5" Samgung monitors with 1600x1200 native resolution on two of my workstations. They're beautiful monitors, but I would trade even-up for the same monitor with 1280x960 native resolution. One thing that's nice about LCDs, by the way, is this. If you get ones that pivot clock- or counter-clockwise, and many do, you can easily run them in portrait mode by rotating them and changing the settings for the driver. My FrameMaker workstation has one monitor set to landscape orientation and the other to portrait mode. Try setting a 17" CRT on its sidegood luck!
LCD monitors will ONLY look their best when the image is displayed at their native resolution, or perhaps in some cases, at a submultiple of the native resolution. For example, a 1600x1200 monitor might look OK when the graphics card is set to 800x600. In my case, that makes the icons and windows appear too large, though. Something in-between is best for me. I doubt, however, that you have a 840x525 choice, but if you do, try it.
Sheila asks about your video cable. An LCD monitor *should* be driven by a graphics card with a DVI (digital) output. Otherwise, the signal must be converted to analog (VGA) and back to digital for display purposes. Since the image is inherently digital to begin with, converting to analog video and then back to digital has its obvious drawbacks. I'm not sure if a modern graphics card can properly identify the connected monitor though a VGA cableit's been so long since I used a CRT and a VGA card that I've forgotten.
A CRT monitor also has a "native resolution" based on the pitch of the phosphor triads and the shadow mask in the tube. Because that was an analog interfaced world, and CRTs are relatively "soft" compared to LCDs, the effects of non-native scan rates and resolution settings were not as troublesome or as obvious as they are for LCD screens. Once you get the settings right on your LCD display, though, you will NEVER consider going back to a CRT display.
It's probably too late to lobby for this, but if I were you, I would strive to get a "dual-head" graphics card, one with two DVI outputs, and put two identical monitors side-by-side. Once you've experienced a dual-monitor setup, you will never be happy with just one screen.
Setting the graphics card resolution for a 16:10 aspect ratio in any other than the native resolution of the monitor will result in "aliasing" artifacts, which may be what you mean by "distortion." The simplistic way to describe the aliasing effect is that some elements of a character inevitably fall in the "cracks" between pixels. When the image resolution setting matches the native resolution, the video data from the card "lines up" perfectly with the pixels, giving the most accurate representation. The other type of distortion that you may be referring to is due to a mismatch of the aspect ration associated with an image resolution setting versus the aspect ratio of the screen. In such situations, a "truly" round circle would appear elliptical on the screen. This is what Winifred is describing. You cannot expect acceptable results with any graphics card setting whose resolution aspect ratio is , relative to the display, mismatched. You must use a setting that corresponds to the 16:10 ratio.
Another way to understand the artifacts associated with aliasing is to imagine viewing a checkerboard through a piece of wire fencing with a square pattern laid on top of it. When the size of the squares in the fencing material are the same as the checkboard squares, you can make things line up and see all of the checkerboard. If the screen wire is a different size, then there's no way to place the wire over the checkerboard without covering some of the squares with wirethat is, unless the pattern in the fence is twice the size of the square, ot four times, and so on.

Problems with two new LCD monitors and my G5 Power Mac

I bought two of these Westinghouse Digital LCD monitors:
http://www.macaddict.com/issues/2005/11/reviews/lcm
When I plugged in the first one, my Mac's power-on light was on, but the Power Mac G5 (1.6 ghz, 1.25 gb RAM) wouldn't boot and the light wouldn't go off. No problems once I unplugged the first LCD monitor. I plugged it into the second one and the Mac turned on once it was plugged in, but at least I had an image. But the computer was frozen; I unplugged and re-plugged it into the first LCD and had an image, but again, it was frozen.
Any ideas why this is happening? I'm going VGA into the DVI via Apple's adaptor.
Help and thanks,
Heath McKnight
Power Mac G5 1.6 ghz Mac OS X (10.3.9) Single processor, 1.25 gb RAM, 80 gb hard drive

Okay, well this is interesting. If I take the brightness down too much, I see "ghosting" on EVERYTHING, including text. Also, when I shut down the Mac with monitor 2 plugged in, the one that when I plug in the LCD it turns the Mac on, it restarts the computer. I did this twice to insure I wasn't just hitting restart by accident. I'm calling tech support Monday (Westinghouse) and I think I'm taking these "good on paper" 16x9 LCDs back to Best Buy for a full refund. Then, I'll buy something different. I'm bummed out...
heath

External LCD monitors with DVI PowerBook: Banding Issues

I have a DVI PB and would like to attach an external LCD monitor. I've looked at both Samsung 20 inch and ViewSonic 19 inch versions but whenever I attach them, I get "banding" around the edges of the external monitor. Tonight, I went to CompUSA to look at the Samsung 204B 20 inch. Taking my PB with me, I hooked up and set the resolution to 1600 x 1200 and the Samsung had huge, fat black banding all around the monitor. If you don't know - banding looks like a large, black border going around the screen. The sales guy pushed some auto-set buttons (which is said always work to remove the banding) but it didn't fix the issue. Any suggestions? Is there some secret that I'm not aware of on how to attach and use an external LCD monitor with the PB? One note: I did set the resolution down to 1280 x 1024, which worked fine to remove the banding but it monitor looked horrible. Not the best resolution for a large monitor.
Thanks,
B. Rose
TiBook 800 & iBook SE Mac OS X (10.4.6)

Hi, Bill. I can't speak to whatever happened with the Viewsonic monitor, since you didn't tell us about that, but it sounds as though the Samsung was in display mirroring mode rather than extended-desktop mode. The F7 key on your Powerbook's keyboard toggles an external monitor between the two modes. In mirror mode, the external monitor displays exactly the same thing as the built-in display. In extended-desktop mode, it functions as a separate portion of your desktop, and you can drag things (windows, icons) from one monitor onto the other. If you're going to use both displays, extended-desktop mode is probably what you'll want: why keep two copies of the same thing in front of you?
In mirrored mode, the fact that your Powerbook's display has a maximum resolution of 1280 x 854 means that only 1280 x 854 pixels of the external monitor can be used — leaving wide black borders of untapped pixels around the copy of your PB's display that's centered on the external monitor. In extended-desktop mode, the external display's native resolution of 1600 x 1200 can all be used, provided that your 32MB of VRAM is sufficient to drive the total of (1280 x 854) + (1600 x 1200) = 3,013,120 pixels, at the bit depth you've selected. (You might have to use the extended-desktop mode in Thousands of colors, rather than Millions.)
Another issue that comes into play with display mirroring is that the 4:3 aspect ratio of the 1600 x 1200 Samsung is different from the 3:2 aspect ratio of the Powerbook's display. If you set the Samsung's resolution to 1280 x 1024 to match the pixel width of the PB display, the top and bottom of the Samsung will be black bands, because the PB isn't manufacturing any pixels to fill those bands. And it will be blurry, because the Samsung has to interpolate to make 1600 pixels look (sort of) like 1280 pixels. Unlike a CRT display, the actual number of pixels in an LCD is fixed. When you change resolution settings on an LCD from its native (maximum) resolution to anything less, the image is always blurred. Only the native resolution can be really sharp.

Hp w2338h lcd monitor

I have an HP w2338h LCD monitor which goes blank after a couple of minutes. Is making a buzzing noise too. I suspect is the inverter. What tipe and how should I change it?
Thnaks

Hello laszlon,
The first thing I wonder is if the monitor is under warranty if it is you should contact HP for repair / replacement. If you are outside of warranty and are looking to venture on your own the issue could be the power inverter. You can search ebay for the monitor you have and power inverter or standard google searches.
When the monitor goes blank can you hold a flashlight to the screen and still see an image?
You may find some additional information in these threads.
http://goo.gl/RgfVg
http://goo.gl/PCahQ
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Best 23" LCD Monitor Under $150

Similar Messages

Maybe you are looking for