Best choice for exporting / importing EUL
Hi all
I have been tasked with migrating an EUL from a R11 to a R12 environment. The Discoverer version on both environments is 10.1.2 and the OS is Solaris on oracle db's.
I am unfortunately not experienced with Discoverer and there seems to be no one available to assist for various reasons. So I have been reading the manual and forum posts and viewing metalink articles.
I tried exporting the entire eul via the wizard and then importing it to the new environment but i was not successfull and experienced the system hanging for many hours with a white screen and the log file just ended.
I assumed this was a memory problem or slow network issues causing this delay. Someone suggested I export import the EUL in pieces and this seemed to be effective but I got missing item warnings when trying to open reports. This piece meal approach also worried me regarding consistency.
So I decided to try do the full import on the server to try negate the first problem I experienced. Due to the clients security policies I am not able to open the source eul and send it to our dev. I was able to get it from their dev 11 system but I dismissed this as the dev reports were not working and the only reliable eul is the Prod one. I managed to get a prod eex file from a client resource but the upload to my server was extremely slow.
I asked the dba to assit with the third option of exporting a db dump of the eul_us and importing this into my r12 dev environment. I managed this but had to export the db file using sys which alleviated a priviledge problem when logging in, I have reports that run and my user can see the reports but there are reports that were not shared to sysadmin in the source enviroment are now prefixed with the version 11 user_id in my desktop and the user cannot see her reports only the sysadmin ones.
I refreshed the BA's using a shell script I made up which uses the java cmd with parameters.
After some re reading I tried selecting all the options in the validate menu and refreshing in the discover admin tool.
If I validate and refresh the BA using the admin tool I get the hanging screen and a lot of warnings that items are missing( so much for my java cmd refresh!) and now the report will not open and I see the substitute missing item dialogue boxes.
My question to the forum is which would be the best approach to migrate the entire eul from a R11 instance to a R12 instance in these circumstances?
Many thanks
Regards
Nick
Hi Srini
The os and db details are as follows:
Source:
eBus 11.5.2
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,Sun-Fire-V890
Target:
ebus 12.1.2
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production DEV12
SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,Sun-Fire-V890
Yes the DBA initially did an exp for me using EUL_US as the owner but a strange thing happened with privileges and also, some of the imported tables appeared in the target environment under the apps schema(21 tables) even though the eul_us exp had been 48 tables.
I also had a problem on the db with "eul_us has insufficient privileges on table space discoverer" type errors.
I checked the eul_us db privileges and was unable to resolve this initial privilege error even though the privileges were granted to eul_us.
The dba managed to exp as system and then import it with the full=y flag in the import command which seems to bring in the privileges.
Then I ran the eul5_id.sql and then made up a list of the business areas and made a sh script to refresh the business areas as follows:
java -jar eulbuilder.jar -connect sysadmin/oracle1@dev -apps_user -apps_responsibility "System Administrator" -refresh_business_area "ABM Activities" -log refresh.log
This runs successfully and I can log in select business area and grant access to the users. The reports return data.
Then one of the users said she can't see all her reports. I noticed some if I opened desktop that were sitting there prefixed with a hash and her version 11 user id.
So back to the manuals and in the disco admin help the instructions are to first go to view > validate > select all options then go to the business area and click file refresh. This gives me a lot of warnings about items that are missing. I assume this is because the item identifiers brought across in the db dump are the version 11 ones and thus not found in the new system.
Any suggestions?
Many thanks
Nick
Similar Messages
-
Choose a database among various databases for export/import using.
Hello,
I am using forms 6i and I want to export several databases using
forms.
With regards to that what is the technique/code I could use to select
the database of my choice for export.
How could we get the name/services of a particular database among
various databases using Forms 6i.
Could some one give me the idea/code to get the above requirement?
Thanks
AmitWhy would you want to use Forms (a client tool) to import or export a database? Imp and exp are command line tools meant to be run on the database server.
You will probably be hitting other problems, like different database versions. For every database version you need the correct imp and exp.
If you really want to use Forms, than just make a table that hold the names of the databases. -
Which are the best settings for exporting comps before edditing in Premiere Pro
Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects". -
Regarding Distribution Monitor for export/import
Hi,
We are planning to migrate the 1.2TB of database from Oracle 10.2g to MaxDB7.7 . We are currently testing the database migration on test system for 1.2TB of data. First we tried with just simple export/import i.e. without distribution monitor we were able to export the database in 16hrs but import was running for more than 88hrs so we aborted the import process. And later we found that we can use distribution monitor and distribute the export/import load on multiple systems so that import will get complete within resonable time. We used 2 application server for export /import but export completed within 14hrs but here again import was running more than 80hrs so we aborted the import process. We also done table splitting for big tables but no luck. And 8 parallel process was running on each servers i.e. one CI and 2 App servers. We followed the document DistributionMonitorUserGuide from SAP. I observerd that on central system CPU and Memory was utilizing above 94%. But on 2 application server which we added on that servers the CPU and Memory utilization was very low i.e. 10%. Please find the system configuration as below,
Central Instance - 8CPU (550Mhz) 32GB RAM
App Server1 - 8CPU (550Mhz) 16GB RAM
App Server2 - 8CPU (550Mhz) 16GB RAM
And also when i used top unix command on APP servers i was able to see only one R3load process to be in run state and all other 7 R3load process was in sleep state. But on central instance all 8 R3load process was in run state. I think as on APP servers all the 8 R3load process was not running add a time that could be the reason for very slow import.
Please can someone let me know how to improve the import time. And also if someone has done the database migration from Oracle 10.2g to MaxDB if they can tell how they had done the database migration will be helpful. And also if any specific document availble for database migration from Oracle to MaxDB will be helpful.
Thanks,
Narendra> And also when i used top unix command on APP servers i was able to see only one R3load process to be in run state and all other 7 R3load process was in sleep state. But on central instance all 8 R3load process was in run state. I think as on APP servers all the 8 R3load process was not running add a time that could be the reason for very slow import.
> Please can someone let me know how to improve the import time.
R3load connects directly to the database and loads the data. The quesiton is here: how is your database configured (in sense of caches and memory)?
> And also if someone has done the database migration from Oracle 10.2g to MaxDB if they can tell how they had done the database migration will be helpful. And also if any specific document availble for database migration from Oracle to MaxDB will be helpful.
There are no such documents available since the process of migration to another database is called "heterogeneous system copy". This process requires a certified migration consultant ot be on-site to do/assist the migraiton. Those consultants are trained specially for certain databases and know tips and tricks how to improve the migration time.
See
http://service.sap.com/osdbmigration
--> FAQ
For MaxDB there's a special service available, see
Note 715701 - Migration to SAP DB/MaxDB
Markus -
Best practice for exporting a dps folio so a third party can work on it?
Hi All,
Keen for some thoughts on the best practice for exporting a dps folio, indd files, links and all, so a third party can carry on the work. Is their a better alternative to packaging each individual indd file and sharing the folio through adobe?
I know there have been similar questions here in the past, but the last (that i've found) was updated mid 2011 and I was wondering if their have been any improvements to this seemingly backwards workflow since then.
Thanks in advance!Nothing better than packaging them and using Dropbox to share. I caution you
on one thing as far as packaging:
http://indesignsecrets.com/file-packaging-feature-can-cause-problems-in-dps-
workflows.php -
Best practice for exporting from iMovie '08 to iDVD
I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
Thanks in advance.the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery) -
Best Codec for exporting animations with alpha channel from FCP timeline
Whats the best codec for exporting animations (hopefully using loseless compression) that will retain alpha channel, and use the current sequence settings for fps and size?
Currently Im exporting image sequences, but I'd prefer a wrapper.. I don't know much about the 'Animation' export codec.. I did notice that set to current size had some funky value of 753x450 or something.. instead of my current project size of 1920x1080...
Anyhow.. Just seeing what others are doing..
basically Im reading out some titles that I'll end up dropping over video later.. but since they render out so slowly (**** lower 3rds is slow) Im trying to get a jump on the process..
Tx..PNG should do it. I think PNG is lossless (that's what they say, anyway). But realistically, if you use PNG, Animation, or JPG2000 set on highest quality, I'd dare you to tell a difference.
I use PNG because it's supposedly lossless, renders twice as fast as Animation in a FCP timeline, and is usually about half the size.
If you use "Export Using Quicktime Conversion", you will need to check all of the settings manually to make sure they match your sequence settings. This is always true, no matter what codec you use.
If that sounds risky, your other option is to go into your sequence settings and change the codec to the one you want to render to (this will probably turn your whole timeline red), and then choose Export -> Quicktime movie. -
Best choice for a date column in forms
Hello,
I want to know what is the best choice for a date field that the user have to enter manually. I read on a other post that a calender control is not directly implemented in forms 9i. So what is the best choice to be "user friendly" with a date field in a form?
thanks in advance.Hi
Don't know if this would be much use to you, but I wrote this function 'Check_Date' a while back to check whether the user had typed something which could be interpreted as a date. You'd make your date field into a Text Item, and include a call to this function (which could be in your form, or in a library) in the WHEN-VALIDATE-ITEM trigger on the item, ie:
IF NOT check_date(:ITEMS.date_item1, NULL, NULL) THEN
RAISE FORM_TRIGGER_FAILURE;
END IF;This would mean that the user could type 'T' or '*' for today, '+1' for tomorrow, '-7' for one week ago, or the date in a variety of formats. When they leave the field, the function tries to resolve what they've typed into a date, and sets the field to a date in the correct format.
('Display_Alert' is just a function to display a named alert with a message.) It can also be used to check that the date entered doesn't fall outside upper and lower bounds. Code follows:
FUNCTION Check_Date (text_in IN OUT VARCHAR2,
lower_bound_in IN DATE,
upper_bound_in IN DATE)
RETURN BOOLEAN IS
first_letter VARCHAR2(1) := SUBSTR(text_in, 1, 1);
date_ok BOOLEAN;
this_date DATE;
date_diff NUMBER(8);
output_format VARCHAR2(12) := Get_Application_Property(BUILTIN_DATE_FORMAT);
TYPE date_format_table_type IS TABLE OF VARCHAR2(12)
INDEX BY BINARY_INTEGER;
date_format_table date_format_table_type;
BEGIN
--Set up table of date formats in order they'll be tested for
date_format_table(1) := 'DD-MON-RRRR';
date_format_table(2) := 'DD-MM-RRRR';
date_format_table(3) := 'DD-MM';
date_format_table(4) := 'DD-MON';
date_format_table(5) := 'YYYY-MM-DD';
date_format_table(6) := 'YYYY-MON-DD';
--Use of T, or * for today's date...
IF UPPER(text_in) IN ('T', '*') THEN
this_date := SYSDATE;
date_ok := TRUE;
--Look for use of +x/-x for number of days different from today
ELSIF first_letter IN ('+', '-') THEN
BEGIN
date_diff := TO_NUMBER(SUBSTR(text_in, 2));
IF first_letter = '+' THEN
this_date := SYSDATE + date_diff;
ELSE
this_date := SYSDATE - date_diff;
END IF;
date_ok := TRUE;
EXCEPTION
WHEN VALUE_ERROR THEN
--User has entered something like '+X', so not valid
date_ok := FALSE;
END;
ELSE
--Go through all the possible formats for date entry,
--if any give a valid date, then return that.
FOR ix IN date_format_table.FIRST..date_format_table.LAST LOOP
EXIT WHEN date_ok;
BEGIN
--Try creating a date using the format masks in the local
--table. If no good, this will throw an INVALID_DATE exception
this_date := TO_DATE(text_in, date_format_table(ix));
date_ok := TRUE;
EXCEPTION
WHEN OTHERS THEN
date_ok := FALSE;
END;
END LOOP;
END IF;
IF date_ok THEN
--Check for violation of lower/upper bounds on date
IF (lower_bound_in IS NOT NULL AND this_date < lower_bound_in) THEN
Display_Alert('info_alert', 'Date cannot be before '||TO_CHAR(lower_bound_in, output_format));
date_ok := FALSE;
ELSIF (upper_bound_in IS NOT NULL AND this_date > upper_bound_in) THEN
Display_Alert('info_alert', 'Date cannot be after '||TO_CHAR(upper_bound_in, output_format));
date_ok := FALSE;
ELSE
text_in := TO_CHAR(this_date, output_format);
END IF;
ELSE
Display_Alert('INFO_ALERT', text_in||' is not a valid date !!');
END IF;
RETURN date_ok;
END;Hope this is useful.
regards
Andrew
UK -
I have recently begun working with a few AIC-encoded home movie files in FCPX. My goal is to compress them using h.264 for viewing on computer screens. I had a few questions about the best practices for exporting these files, as I haven't worked with editing software in quite some time.
1) Is it always recommended that I encode my video in the same resolution as its source? For example, some of my video was shot at 1440x1080, which I can only assume is anamorphic. I originally tried to export at 1920x1080 but then changed my mind as I assumed the 1440x1080 would just stretch naturally. Does this sound right?
2) FCPX is telling me that a few of my files are in 1080i. I'd like to encode them in 1080p as it tends to look better on computer screens. In FCPX, is it as simple as dragging my interlaced footage into a progressive timline and then exporting? I've heard about checking the "de-interlace" box under clip settings and then doubling the framerate but that seemed to make my video look worse.
3) I've heard that it might be better practice to export my projects as master files and then encode h.264 in Compressor. Is there any truth to this? Might it be better for the interlaced to progressive conversion as well?
Any assistance is greatly appreciated.1) yes. 1440 will display ax 1920.
2) put everything in a 1080p project.
3) Compressor will give you more options for control. The h264 from FCP is a very high data rate and makes large files. -
Best choice for a proxy server on NT?
Hi, I'm wondering what the best choice for a proxy server is on NT?
Currently I'm running a 2 WL server cluster, but this will grow rapidly. If
all of the pages that I will be handling will be .jsp (with the exception of
1 or 2 servlets), which is the best configuration (performance wise) to go
with?
Should I use a Weblogic Servlet, NSAPI, or ISAPI to do the proxiing. My
guess was that IIS would perform the best on an NT machine and that it would
not be as large as a memory hog as Weblogic would be to simply run as a
proxy. Is there a significant amount of latency produced by the ISAPI
bridge?
Any suggestions?
Thanks,
Chris
Chris,
Please do not cross post across the newsgroups. We would very much
appreciate it.
There is a response to this message posted on the performance newsgroup if
you're interested.
Thank you so much!
Michael Girdley
BEA Product Manager
Chris <[email protected]> wrote in message
news:851ks4$auk$[email protected]..
> Hi, I'm wondering what the best choice for a proxy server is on NT?
>
> Currently I'm running a 2 WL server cluster, but this will grow rapidly.
If
> all of the pages that I will be handling will be .jsp (with the exception
of
> 1 or 2 servlets), which is the best configuration (performance wise) to go
> with?
>
> Should I use a Weblogic Servlet, NSAPI, or ISAPI to do the proxiing. My
> guess was that IIS would perform the best on an NT machine and that it
would
> not be as large as a memory hog as Weblogic would be to simply run as a
> proxy. Is there a significant amount of latency produced by the ISAPI
> bridge?
>
> Any suggestions?
>
> Thanks,
> Chris
>
>
-
What is the best setting for export movie in widescreen format?
Please tell me what is the best setting for exporting movie in Widescreen format?
Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan -
Best Settings for Exporting DVD Footage in a Movie File
Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results -
Whats the best settings for exporting a three camera youtube video on a mac book pro
I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help
chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR -
Re: Best options for exporting a sequence and making a DVD
I using iPad 2.
"Re: Best options for exporting a sequence and making a DVD" and "I'm using iPad 2" and "My phone number is not verified!" don't seem to be entirely related. Can you please restate your question?
-
Script request for exporting, importing, inserting entry to Oracle 9i LDAP
Do anyone has the scripts for exporting, importing, inserting entry to Oracle 9i LDAP server? Thanks for help.
you can use ldapsearch utility to generate ldif files. Perform a search on the node you want to export and specify the output to be in LDIF format ( -L - this is a ldapsearch option). Once you have the ldif file, you can import it to any LDAPv3 complaint server such as OID. for OID, use ldapadd/ldapmodify utility to import the data.
These utilities are present under IAS_HOME/bin or ORACLE_HOME/bin.
Maybe you are looking for
-
USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation. Inciden
-
I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive. How can I change the settings so it automatically goes to my new hard drive?
-
Effects on adjustment layers not working in PPro CC 2014
I am trying to use an adjustment layer to add an effect to my entire project (about 3 minutes). When I add the adjustment layer and the effect, nothing happens. I can apply the effect directly to a clip and it works fine. Am I missing something or is
-
Anyone to help on reflection ????
Hi People, Please tell me what's wrong with the following piece of code. All I am trying to do here is, invoke a method of this class through reflection. Need to develop a reusable component. package TestPro.JSPTest; import java.lang.reflect.Method;
-
I turned off my iPhone 4 S ehen I tried to re-turn it on, it didn´t turn on any more.