Best External Drive to Install Leopard on

I'm ready to install leopard, however I would like to install it on an external drive. I would partition my internal drive, but I am low on space and can't. I would just like to know if I should purchase a g-drive, mybook, or something else. Please leave some suggestions.

joshyptoshy wrote:
thanks guys, i was leaning towards the g-drive, and booting using a firewire 400 connection should work fine right?
That will work fine. Be sure it's GUID and it should show up on the install screen.
I would still be sure to back up your original system. If the g-drive is large enough, you can partiton it and use it for your backup. Later, when you don't need it, you can use it for anything else.
One thought, though. - - - what will you use for TM? Or will you not use it?
Message was edited by: nerowolfe

Similar Messages

  • Setting up an external drive before installing Leopard

    I have just purchased a new MacBook and a stand alone version of Leopard to put on my iBook. I have an OWC external drive as well. I want to set up the external so that I can have a bootable copy of Tiger and OS9 (my kids need OS9 to run some of their games) The external is configured as MacOS extended right now with no partitions. I am guessing that I should partition this drive with four partitions? One for Tiger, one for OS9, one for Time Machine, and one for other data, music, movies, documents, etc. My question is what would be good sizes for these partitions? Also if I use Carbon Copy to clone my existing OS, is the clone bootable or do I have to do something else to make it bootable? Will it save all my current files too?
    I have been reading the discussions group for several hours trying to figure out what steps to take to install Leopard on my iBook so it has the least amount of problems and this is what I have come up with.
    1. repair permissions, run Apple Hardware Test, back up my current OS and any other documents, files, etc. using Carbon Copy
    2. Install Leopard using Archive and Install option, with save network preferences box checked.
    3. repair permissions again after install
    4. enjoy Leopard, (hopefully)
    Have I left anything out?
    thanks in advance for everyone's help.
    Jennifer

    I believe you can have OS 9 on the same partition as Tiger, and use "classic" to run the kid's games under Tiger. That will prevent you from wasting disk space with to many partitions. I would definitely recommend putting Time Machine on its own dedicated partition as you indicated.
    OS 9 can be installed on a single gigabyte. I'd not install OS X on less than 10GB (this would be for Tiger...and I'm assuming it wont be heavily used beyond running the OS 9 games in classic mode). I'd then put as much as you think you can into the Time Machine volume....as a rule of thumb, having the TM volume be double your Leopard installation is plenty, but it really depends on your uses (file size, frequency of creation/editing, etc).
    The clone will be bootable if you restore it to a working partition. As a clone, it will "clone" everything on your drive...files and system...everything.
    Those install steps seem right to me. The only thing I'd suggest is to give Leopard a "break-in" period where you set up all the system preferences the way you want and let it run (boot it up and shut it down a few times). Run all the applicaitons that came with it (textedit, photobooth, etc) and see if then open and behave corretly. Then move on to third-party applications you've installed and be sure they work as well. When all that's done and things seem to be ok, migrate your files back to the drive if it's needed, though in the archive and install there's teh option to preserve user data, and this will do the copying for you.
    One potential problem is if programs behave funky and settings dont get saved, etc., you might have corrupt preference files, in which case try removing the preference files from your ~/Library/Preferences/ folder for the affected applications.
    Hope it goes well!

  • Time Machine can't find external drive after installing Lion

    Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro  says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

    Does the drive work when just directly connected? If so, have you prepped the drive?
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Can I partition an external drive and install 10.6.8 so I can run some older software?

    I have older software that won't run on my 21.5 iMac. Can I partition a 3TB Lacie external drive, then install 10.6.8 on it so I can use the older software?

    The computer that I purchased did come with Parallels Desktop 10 for Mac, but I thought that was only for running some Windows software. Not a clue how to use it.
    I actually asked a similar question about installing the older system on the external drive when I talked to Apple yesterday. They guy said go ahead and try it! Huh?

  • Best external drive and format?

    What's the best external drive for backing up
    imovie files and disc images? What format should the drive
    be set up in for Mac usage and to accept the imovie projects?

    If you simply talk about the spec and functionalities, caldigit's VR should have better spec over others
    Interesting unit and something I will keep an eye on over the next year. Thanks for the links
    I am primarily a LaCie d2 triple interface user (3-year old 320 Gb, 2-year old 500 GB, 1-year old 1 TB, and 1-month old 2 TB drives currently in use). For the most part I have been well satisfied with these drives even after having a power supply on the 1 TB model "weaken" on me to the point where the unit no longer worked in the "auto" mode. Since LaCie support provided a correct diagnosis of the problem within one work day, I was able to confirm the problem immediately, and they had a new replacement power supply in my hands in about 3 days, I have naught but high praise for their support people and remain a satisfied customer.
    As I will probably need to replace the 2 TB drive in Oct or Nov of '09 as my iTunes/TV storage drive, I was looking at the LaCie 4 TB multi-drive unit but must admit I prefer the look of the CalDigit 3 TB unit. However, I am not sure I am willing to spend that much extra for the CalDigit's smaller configuration. Still, only time will tell and it is much too soon to make an preliminary, let alone, final decision.

  • No Hard Drive after installing Leopard

    Hi, i just installed leopard on my macbook and everything went very well until i turn it off and then turn it on again. It just popped a kernel panic screen, just after de main grey screen with the apple logo on it. So I try to reset the PRAM and doesn´t work, and I am stuck like in the middle of nowhere because apparently I have no hard drive to install leopard.
    I try to verify the disk with disk utility but nothing happens, so I try to reinstall leopard and guess what, I have no hard drive to chose for installation.
    What can I do? Thanks in advance

    hey, my hard drive died recently and i don't think it had anything to do with leopard either. you might want to check what kind of hard drive you have because a certain type of seagate hard drives that are installed in mac computers are defective and can crash at any time. i would check out this website and see if this might be your problem...
    http://www.appleinsider.com/articles/07/11/27/appleaware_some_macbooks_contain_flawed_seagatedrives.html

  • What are best external drives for Leopard Time Machine?

    Would appreciate advice. I'm getting a MBPro with Leopard. I notice a discussion says Maxtor is not formatted for Time Machine. Is there a list of external drives that are ready to go?
    Many thanks, I'm not too swift at my age at this stuff.
    Ralph

    <pre>
    Name : WD
    Type : Disk
    Partition Map Scheme : GUID Partition Table
    Disk Identifier : disk2
    Media Name : WD 5000AA External Media
    Media Type : Generic
    Connection Bus : FireWire
    Connection ID : 40718544432098240
    Device Tree : /PCI0@0/PCIB@1E/FRWR@3/node@90a94ce8a56bc0/sbp-2@c000/@0:0
    Writable : Yes
    Ejectable : Yes
    Mac OS 9 Drivers Installed : No
    Location : External
    Total Capacity : 465.8 GB (500,107,862,016 Bytes)
    S.M.A.R.T. Status : Not Supported
    Disk Number : 2
    Partition Number : 0
    </pre>
    and
    <pre>
    Type : Volume
    Disk Identifier : disk2s2
    Mount Point : /Volumes/G5iMacTimeMachineBackup
    File System : Mac OS Extended (Journaled)
    Connection Bus : FireWire
    Device Tree : /PCI0@0/PCIB@1E/FRWR@3/node@90a94ce8a56bc0/sbp-2@c000/@0:2
    Writable : Yes
    Universal Unique Identifier : 2BEBF1BD-2C4A-344A-A86F-B3B426205A66
    Capacity : 465.4 GB (499,763,888,128 Bytes)
    Free Space : 338.0 GB (362,963,013,632 Bytes)
    Used : 127.4 GB (136,800,874,496 Bytes)
    Number of Files : 1,380,202
    Number of Folders : 152,237
    Owners Enabled : Yes
    Can Turn Owners Off : Yes
    Can Repair Permissions : No
    Can Be Verified : Yes
    Can Be Repaired : Yes
    Can Be Formatted : Yes
    Bootable : Yes
    Supports Journaling : Yes
    Journaled : Yes
    Disk Number : 2
    Partition Number : 2
    </pre>

  • The No.1 Best Tip For Anyone Installing Leopard

    Reading through all the 'posts of woe' and nashing of teeth and ******** and, well you get the picture, one thing is coming to the front as the No.1 best thing to do before installing Leopard........BACK UP YOUR COMPUTER...down load superduper (for free) and do an 'all files' back up, then make sure you can boot off that external HDD and then attempt the install. Actually for good measure get another HDD and manually back up all your data, files and media so at least you have another back up just in case. Also have your tiger discs at hand in case of a massive meltdown.
    Most folks seem to be ****** off here because they have lost everything on their computer, and that would be okay if it wasn't for the fact that apple clearly states that back ups should be made. The truth is we have been spoilt with OS that never crashes and is so easy to upgrade, that when something like this comes along we panic. Without getting into the whole "was it ready to be released" debate, the fact is its here and any problems that occur in the early days will be swiftly eliminated by the folks at apple
    This is the coal face here folks, its dirty and you should be prepared to get a little beaten up! I reckon we'll be getting software updates every day or so for a while
    I still haven't been able to install leopard and I'm a little peeved, but I'll sort it out, and in the meantime I'll thank my lucky stars I don't have a PC and that tiger is still working.
    Keep the fate brothers and sisters

    It will be interesting to see how this all sorts out. I did back up. However, I installed as an upgrade on 4 different computers. Mac Pro 2.66 intel, Mac Book Pro Intel, IMac 24" cor2duo extreme, and an IMac corduo 20". All installs went without a problem. I do hope Apple looks at this and tries to figure out why there is so much variation from one to another when the machines seem to be the same in many cases. I think that perhaps as do many other programs that Apple puts out, there is an "Apple is checking your computer for compatibility"screen before the install begins. That way any program that might be a problem could be addressed before install. Also some useful information as to the install process itself might be helpful in the package as well. I.E. that the blue screen might hang for a significant time as it checks the hard drive might reduce some of the anxiety many of us feel when it appears that things have hung when perhaps they have not. In any case I suspect things will shake out soon enough. I think Apple has to learn that there are many new customers old and young that need a little more help than just put the disc into your computer and let it go. Just my feelings on the matter since I was fortunate to have no problems.

  • Best 1TB drive to install inside?

    I have a last edition white 20" iMac and really need more space inside it.
    I have a 750GB external drive already that is bursting.
    So i figure 1TB inside is the best option.
    There seem to be problems with firmware on the Seagates. people having to update it themselves.
    So I am thinking about a HITACHI Deskstar 7K1000 HDS721010KLA330 (0A35155) 1TB 7200 RPM SATA 3.0Gb/s Hard Drive.
    Has anyone installed this drive?
    i want to just install and load leopard on without having to mess around lots.
    I saw someone said he set the SATA jumper to 1.5GB/s instead of 3GB/s.
    Is that really needed?
    thanks

    Seagate makes (at least) three 1TB Barracuda SATA drives:
    \- ST31000640AS -- Barracuda 7200.11 family, 16 MB cache
    \- ST31000340AS -- Barracuda 7200.11 family, 32 MB cache
    \- ST31000340NS -- Barracuda ES.2 family, 32 MB cache
    [Seagate Barracuda 7200.11 SATA drives|http://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracud a%207200.11/100452348b.pdf]
    [Seagate Barracuda ES.2 drives|http://www.seagate.com/docs/pdf/datasheet/disc/dsbarracuda_es2.pdf]
    The 7200.11 family are "workstation class" products, while the ES.2 family
    are (more expensive) "enterprise class" drives optimized for high-reliability
    24/7 operation in server, RAID, and NAS applications. All have identical
    performance specs (except for reliability) and all have 5-year warranties.
    There's a possible compatibility issue with ES.2 drives and internal SATA
    controllers on (some?) iMac models. Seagate's previous-generation "ES"
    drives weren't compatible with the G5 Mac SATA controllers -- but I don't
    know whether this situation still exists with ES.2 drives and newer iMacs.
    [Seagate ES / Mac G5 / SSC compatibility issue (outdated?)|http://www.seagate.com/www/en-us/support/beforeyou_buy/buying_a_drive_for_amacintosh]
    There's one customer comment on Newegg.com suggesting that it might
    still be a problem (for a Mac Pro of unspecified vintage) -- but it would be
    unwise to take a single anonymous comment at face value. If you think you
    might want the ES.2 model, I'd suggest checking with Seagate tech support
    before crossing it off your list. (Ideally, Apple tech support should be in a
    better position to answer an SSC question -- but I wouldn't waste my time.)
    good luck,
    Looby

  • How can I boot my (OS Lion) Macbook (using external drive) to run Leopard

       I have recently installed Lion on my macbook. Previously, I had Snow Leopard.  During that time, I used an external hard drive to boot into Leopard to run some programs that didn't run on SL (Spring Cleaning, for example).
       Today is the first time I tried to boot from the hard drive with Leopard on it since upgrading to Lion. Hitting Option during startup doesn't even show the external drive, and using the System Preferences/ Startup Disk method is equally useless.
       I like Lion and don't feel like doing a total re-install just to have occasional access to an older OS, but I'd sure like to have it all!
      Any ideas for a workaround?

    Verify that your external drive was formatted as GUID, it won't be bootable otherwise.

  • Please Help, What's the best way to un-install Leopard?

    I have a new MBP 17" . I installed Leopard 2 days after I bought the machine, am having so many keyboard problems, like not being able to type and waiting around for the keyboard to start typing. It has now become very annoying and I cannot get any work done! I think I should un-install Leopard and go back to Tiger. How can I do this successfully and without losing any data. I will back up..... If any one has the answer to this it will be great. I also think that apple knows about this issue, and I think it's really bad policy on their part, not to simply say, WE ARE FIXING IT...... In-fact I think it's downright stupid of them!

    What I meant with external backup is either an external hard drive or another mac where you have a copy of all your important files/applications and you should be able to use Migration Assistant with either. If you want to use MA, it will copy all the files (you can't pick and choose), so what I did was simply connect my external hard drive to the new MBP via firewire and copied over whatever I needed. Since I also keep copies of all installer .dmg's (updates or applications) on the external, I copied those over as well and then just installed my (some third party) applications and/or updates. If you don't have an external hard drive, you should also be able to connect your Powerbook and new MBP via ethernet cable and copy your files over. I used that method as well, using my internet ethernet cable (temporarily disconnected from my cable modem) and following the directions under Mac Help -> Filesharing. I've found both the firewire and ethernet methods easy and quick and they worked for me because I wanted to pick which files I wanted to copy to the new machine (rather than all of them).
    I will wait for quite a while before installing Leopard again (if at all); not only because of the keyboard issue, but Disk Utility seems to have some major problems, and so does the System itself (showing up during 20+ minutes of every Permissions Repair with 71 full pages of "ACH found but not expected in..." listing what seems to be every single system file). I also prefer to open the contents of a folder from the dock in alphabetical order, rather than the admittedly cool looking icons - when you have 120+ items/folders in that folder, it's a waste of time to get through all of those icons. And Spaces didn't work for me either. So, except for the cool desktop picture, I wasn't at all impressed with Leopard. However, I did use the included iLife 08 (except iMovie 08) and custom installed that once I had Tiger up and running.

  • Best External Drive for MacPro and iMovie

    In using iMovie, I find my existing main drives filling up, and need to get a fast external drive which works well with the Mac Pro and the snow leopard operating system. I note that there is a new usb 3.0 standard, but my understanding is that it does not work with os10.6 without additional third party hardware. Any suggestions on best mass storage (external) for iMovie which is fast enough so that the video is not negatively impacted when preparing a movie?

    geo.adi wrote:
    Are you saying that MacBook Pro 15" has slot that is not good for eSATA connection?
    on this site (http://reviews.cnet.com/laptops/apple-macbook-pro-2007/4507-3121_7-32465635.html ?tag=mncolBtm;rnav)
    it says "*Expansion Slots Total (Free) 1.0 ( 1.0 ) x ExpressCard/34 - SO DIMM 200-pin*"
    and looks like you've said that what one need for eSATA is ExpressCard/34 slot.
    I'm confused...
    Perhaps you should ask your question in the Computing Hardware > Macbook Pro section of this forum.
    Type 'Express Card' in the search box and you will find plenty of reading material.
    Useful links?:
    http://discussions.apple.com/thread.jspa?messageID=12671141&#12671141
    http://firmtek.stores.yahoo.net/seritek2sm2e.html

  • Cannot Eject External Drive Using Space/Leopard

    Since I installed Leopard, I find it very useful. But in order to eject the external drive, I must quit all applications (six), which forces me to open the same documents each time. Isn't there a way to eject the external drive so that I can keep my applications open in Spaces?

    This issue got worse for me. I read a bunch of posts about troubles with Time Machine and Spaces, so I turned Spaces off on my computer and restarted it.
    Time Machine immediately started working and did a small backup successfully. I tried to eject the disk to see if it would work and it did!
    The problem now is that the computer won't recognize my USB drive after I ejected it. I plug it in and the drive will not show up in the Finder and the drive just keeps rhythmically clicking away. I've tried restarting my computer without luck. Also, the USB drive works normally on a different computer.
    Finally, I turned Time Machine off and the drive immediately appeared in the Finder and is OK. The drive (a new FireLite formatted Mac OS Extended-Journaled) just won't work with Time Machine. For me, this all started after I turned on Spaces the first time.

  • External drive and snow leopard

    Hello,
    My macbook's internal optical drive doesn't work anymore but I have an external drive that I use. Does anyone know if i'll be able to install snow leopard using this? I know that if i tried to format the disk and reinstall leopard it wouldn't work because the USB drivers wouldn't be installed. But...will upgrading work this way too?

    Why wouldn't the USB drivers be installed?

  • Mac Mini Will not boot from external drive or install disk

    Hi,
    I just bought a new 2.0 ghz mac mini 1 gb ram. 120gb hdd.
    I have a separate external HDD attached and wanted to boot from this. It works with my MBP and IMAC.
    When i plug it into the Mac Mini and start up with Option key. It recognizes it.
    I then click on it. It automatically reboots.... then grey screen comes on. It goes black after about 10 seconds. then boots into original operating system.
    I also tried to use the MAC install Disk, thinking it might be a corruption in the shipped software. It does the same thing.
    I have MAC Install DVD on an external drive too. Same issue.
    I partitioned the HDD and installed a copy of the Mac install disk onto that with disk utility... Same thing grey screen, then black then back to original operating system.
    Not sure what is going on?
    thanks
    Chris

    Hi,
    Thanks.
    It is running 10.5.8.
    I am trying to boot up an external drive with 10.5.8 on it. It works on my Macbook Pro which is running 10.5.8, runs on my IMAC running SL. But doesnt work on the mac mini?
    It had been running SL, however there are a number of programs I have like Windows Live Sync which are not yet compatable with SL so i downgraded to 10.5.6 which came with the Mac Mini then loaded all updates.
    It seems to just go into an auto reboot as soon as i click on it.
    i thought it might be the firmware? Is it possible to downgrade them and then re-install?
    I have reset the PRAM.
    Any help would be appreciated.
    Thanks

Maybe you are looking for