Best ideas for a video deck

I am using a Canon ZR65MC DV camcorder, and I am looking to buy a deck for it. Do I need one?

Depends...do you want your camera to wear out? All that shutting back and forth and rewinding and fast forwarding isn't good for the poor thing.
Yes...get a deck. It is designed for this.
DSR-11 at the minimum. You have two 30" Apple displays...you can afford this.
Shane

Similar Messages

Best Ideas for Analog video...

I'm doing a low end high school football team video.
Unfortunatelly it was shot by a parent that doesn't have the latest camera technology. It was shot in analog video.
I looked into some Analog to Digital Video converters. http://www.nextag.com/CHANNEL-SOURCES-XITEL-INPORT-60374928/prices-html?nxtg=940 0a200507-A19F9E70CC1E7C04 - was looking into this one, just seeing what you guys think.
I can't transfer the video from camera to camera, because my camera doesn't support an input. It's being done across state so I'll be using my old analog camcorder and maybe using that converter in the process.
What are your thoughts?

Benny,
I don't think you need a TBC (time base corrector). As I understand it you just need to get the parent's footage into your mac via firewire.
There are a number of ways to succeed at this. Probably least expensive is to dub (make a copy) of the parent's tape to a DV tape (I assume that's what your camera is). Use RCA cables to dub from the parent's camera/deck to any DV camera or deck that will accept RCA cables. Once it's in DV you're back in business.
Yes, you could also use an A to D converter but I don't think that'll be necessary (I'm trying to save you money without losing quality).
Just borrow a basic DV deck, or even a DV camera that'll allow you to make the dub. You might be able to get a local video production company to help you; you can thank them profusely in the credits.
I hope this helps,
Craig

Best export for flash video

I have completed an edit of a 7 minute teaser for a feature film and need to export it to be displayed online in a flash player. The footage is HD 1080i, 29.97fps and edited in the Animation coded. My experience with best exports for flash conversion is very limited so please bare with with.
1) Is it possible to export directly from FCP to a flash file? If yes, would that be a good idea, or should I use third party softwares for better results?
2) Which third party softwares are recommended for flash conversion? And what export compression should I use in FCP for best flash conversion results?
3) Any other tips and tricks to get the best quality for flash video display?
Any help would obviously be greatly appreciated. Thank you.

When I have quality HD video that I want to export for flash, I compress it with h.264 codec. Then, with the new version of Flash, you can swap out the .mp4 extension for .f4v and your good to go in Flash. Quality looks pretty good at a fraction of the file size.

What is the best IDE for database programming in java?

im just new to java, i have experience in powerbuilder and visual basic. Im looking for an IDE for JAVA Database Programming that have same ease of use of the GUI builder of visual basic and power of the Datawindow in Powerbuilder.
What is the best IDE for database programming in java?

hey sabre why not just help me? instead of posting
annoying replies. You want me to browse all the post
two weeks ago to find what im looking for. stoopsMost regulars to this forum find X-posting annoying. Since you are lazy and want me to search the posts of the last couple of week for you, I find you very annoying.

Best format for converting video

What is the best format for converting videos for your iPod? I am using handbrake but there are alot of settings. What is the best one? mp4,avi,ogm? and what about codecs? aac audio, mp3 audio,h.264 video mpeg 4 video, .mp4 video? Need help?

See this Wikipedia article for some encoders:
* http://en.wikipedia.org/wiki/Theora#Encoding

Best software for animated video

What would be the best software for animated video similar to this:
youtu.be/e9_vszxZGB4
Thanks...

Hi Mathew,
You can go with Adobe Edge Animate.
Its an premier HTML software with integrated tools for creating compliant cross-browser animation and other content.
For more info please refer http://html.adobe.com/edge/animate/faq.html
Let me know if you need more info.
Thanks!
Eshant

What's the Best App For Watching Videos on iPad Air?

Okay, so there's no Flash past, present or future for the iPad. I read some discussions here in the archives from a year and two ago about which workaround works around best (or least badly). Is there any update now as of December 2013 for what's the best app for viewing videos online on the iPad (Air)? Thanks.

I downloaded the new (2013) version of Photon and it's been playing, appropriately enough, episodes of Star Trek: TAS that otherwise require Flash. The one thing I have to remember is to click the goofy lighting bolt icon toward the top right-hand corner of the Photon screen when I return to warch an episode if I stopped in the middle. Basically it will turn off the "Flash" emulation when the screen goes dark with inactivity, and then when you reopen Photon it crashes and you have to re-reopen Photon, click on the link to return to the website, and then click the lightning bolt icon. I don't know why the producers made it that way, as it's pretty inconvenient, but maybe they wanted to make a browser more than a Flash emulator. I haven't tried other Flash videos yet, but so far, so good. :-)

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

What is the best Computer for HD video editing where can I get it under $3000-5000? Thank you!

What is the best Computer for HD video editing where can I get it under $3000- $5000.00?

The wording of your question suggests you may be new to video editing, in which case the types of projects you will be doing may not be the most complex.
Please accept my apology if that assumption is incorrect.
The cheapest computer available will edit 1080p video perfectly well but if you must have the "best" you will be looking at nothing less than a MacPro.
Too many people get hung up about the equipment they use and blame it for any inadequacies . . . when the most important component is the operator.

Best bang-for-buck video card for hi-end Photoshop work..?

When I bought my rig 3 or 4 years ago, I was told that when it comes to 2D performance, all modern video cards are created equal. That the price differences really only affect the 3D side of things.
So I bought a NVIDIA GeForce GT 240.
Why this thing has a fan, I have no idea. Like I said, even when I bought it it was considered "bottom-of-the-heap". Anyhoo, long story short, the fan died on me a couple of days ago. I can now keep the card from overheating through a house fan pointed at the open case. Naturally, I can't keep this going forever. I need to buy a new card.
The good news is that I don't need ANY 3D performance (unless vector logos count). I only use my computer for hi-res Photoshop work (at 1920x1200+ resolution with PSD files that sometimes reach 5 or 6GB) and full-screen video playback. No games are being played on this rig whatsoever.
The bad news, however, is that money is an issue. I can't just go buy the latest $300 card, especially not to put on a 3 or 4 year old rig. The Core i7 920 CPU and 10GB of ram (on Windows 7 64) will keep me going for a couple of years more, but I don't expect to still be using this rig much further beyond that.
I just want to keep using my Adobe suite and play movies in hi-res on this thing. That's it.
I've been told to look into the NVIDIA Quadro series, but that appears to me out of my price range. I'd like to keep it under $150. Or even $100 if at all possible. Other cards quoted to me are the GT630 and R7-250 (which is apparently a rebranded Radeon HD 7770).
What would you guys recommend that would be the best bang for my buck in this scenario? I'd hope most of today's cards - even the cheapest ones - are at least a step up from the NVIDIA GeForce GT 240. Right?
If anyone has any advice...

Trevor Dennis wrote:
There was an article on Tom's Hardware yesterday, announcing that nVidia are stopping driver support for it's older cards.
http://www.tomshardware.com/news/nvidia-eol-graphics-card,26304.html
This goes back to the 300 range and earlier cards, but also includes the Geforce 405 from the 400 range.
Be that as it may, my GT 240 is still being listed as supported in last week's 335.23 driver release. And that's the driver that fried it. This "1 driver for all our cards" thing is really for the birds. There's no way for product owners to know what the latest, safest driver for their card is. I don't think NVIDIA thought this thing through when they announced they'd be going with a "single driver for all" model.
I don't think NVIDIA realizes what a huge potential lawsuit could be headed their way from other owners like myself (but not me, I'm not very letigious) who saw their cards get physically damaged by drivers that were supposed to be compatible with them.
I see you recommending I stay under $100, which was my original plan, but then you said I should definitely get a Quadro. When I checked, Quadro cards were more expensive than the GeForce line. Did I misunderstand? Were you saying NOT to touch the Quadros?
On other forums, they tell me to push for the new GTX 750, swearing its 2D performance makes it worth the price, despite the fact that it's clearly a GAMING card, and I don't game.
I'm so confused.

Best camera for Cisco Video Advantage

Hi,
I am looking for a camera which is having the best specifications for Video advantage. It looks like the Microsoft LifeCam NX-6000 is the one. (1600 x 1190 with 30 fps) Does anyone have experience with this camera or who has good experience with a camera which is not listed in the "tested" camera list:
Cisco VT Camera II
â¢ Cisco VT Camera
â¢ Logitech QuickCam Fusion
â¢ Logitech QuickCam for Notebooks Pro
â¢ Logitech QuickCam Pro 5000
â¢ Logitech QuickCam Ultra Vision
â¢ Microsoft LifeCam VX-6000
â¢ Microsoft LifeCam NX-6000 Webcam
â¢ Creative Webcam Live Pro USB 2.0 Webcam
Thanks in advance,
Jeroen

Hi Mark,
Thanks a lot for your reply. We tried several models which are not in the list. They all worked. The only problem is that the Video Advantage narrows down the format. I tried the Logitech Quickcam Sphere AF. In the Logitech application it's a great Webcam in with HD quality but these are the Specifications of Video advantage:
â¢ H.263 and H.264 video codecs: Bit rates from 50 kbps to 1.5 Mbps
â¢ Video formats (up to 30 frames per second): 352 x 288, 320 x 240, 176 x 144, and 160 x 120
â¢ Interoperable with most third-party H.323 video terminals from verified IP video telephony partners
So it's only working at 352 x 288. I hope the next version of Video advantage is able to increase the resolution.
I would also like to know if there is a way to enable the camera automatically when a phone call is established.
I don't have a MCU to do video conferencing but is there a way to conference a none-video phone into an video conversation?
Thanks!
Regards,
Jeroen

Best practices for posting video to my iWeb site?

What's the best way to upload movies to my site so that visitors can watch them while sacrificing the least amount of quality, size and speed?
As an example, the iPhone commercials on the Apple webpage start playing instantly, look great and when Large is selected are the perfect size.
But I made a 1.5 minute iSight video on iMovie and saved it as a streaming quicktime file and it takes about 10 minutes to fully load once it's on my site. And I have a 10 mpbs internet connection.
I also just pulled up a large movie trailer on iTunes and it looks great and started playing instantly.
Is there a better way for posting video? Perhaps in flash or another codec that would make more sense? Videos on youTube play instantly, although the quality isn't always great.
thanks!
MacBook Pro Mac OS X (10.4.9)

There is no absolute correct way. One way is shown in this demo page. It lets the page load without having the movie load thus speeding up the page load a fair amount. The movie only has to load when the Play button is clicked on and then it opens in a separate window sized just for the movie. The code used is also shown on the page. This way can allow you to use a larger QT file and not affect the loading of the original page it's linked to.
OT

What is the best format for HDV video for a computer playback

Hello guys,
I have made a very nice HDV video and after the frustration and awful results with compression for
SD DVD, I have decided just to export that video as a file, put that file on DVD, so people can just pop that DVD into their computers, copy that file on their HD and play it. (so there is no compression needed for over internet data transfer, Bit Rates for space, etc). The video is
HDV 1080i 60. If I export it from FCP as a QT Movie the quality is beautiful. But when being watched on the computer screen, there are those interlace lines visible, when any faster motion in the video occurs. So I am wondering, what would be the best export option in order to provide best qualities for computer playback. Would it be some of those QT progressive modes, like 1080 p24? Or any other?
Thank you for your help.
Cheers,
K.

Chris Walsh1 wrote:
Why are you using FCP 6.02? Why didn't you do the update to 6.04?? I did, and I am having tons of issues
That is pretty much the reason. It is fresh out the gate and so far untested. I am not an early adopter of any new technology (soft or hardware wise). I like to wait it out and see what other peoples' experience is. A bit of a prickish way to put it is: "In Chess, the pawns go first." (I'm a big Chess nerd -- I have Chess analogies for just about everything).
But even if the latest FCP, OS X and QT versions were humming along without any reported issues by the "power users" (by that I mean people who are editing on their systems 40+ hours a week in a professional capacity) I still wouldn't have upgraded because I am in the middle of three projects.
Well, that isn't entirely the truth. I started all three projects on a PowerMac G4 running OS X 10.4.11 and FCP 5.1.4. In the midst of this I started an across-the-board upgrade -- new computer, monitor, OS and FCS. But what I did (am still doing) is migrating from one to another and testing the performance on the new one before committing. In doing my research before hand, I see that the magic cocktail for stability appears to be OS X 10.5.2, FCP 6.0.2 and QT 7.4.5 so I built my new MacPro to that and stayed there. I have migrated all my current projects to the new system and have been putting the new setup to the test and is passing at every turn, so I feel confident I can work on this new system and will be retiring the PowerMac soon, but throughout this process I always had my stable G4 setup available so I wouldn't risk losing any work.
Might the reason the video you compressed "looked great" be because you didn't do the update?
Maybe, but I can't say with any certainty.
In the old compressor, I had no problems (in earlier versions of my project) compressing the video. It always looked GREAT! In 3.03, I get weird issues that don't make sense to me at all.
In the older version of compressor, this never happened. Even on this project.
Then I would think the update is the likely culprit.
Here is what I would like to try as my final attempt. I just bought yet ANOTHER computer. A Mac Pro/Two 2.8GHz Quad-Core Intel Xeo. I'd like to try to load Final Cut Studio on this machine, but where should I stop my upgrading? What is good stable working system for everyone??
OS X 10.5.2, FCP 6.0.2 and QT 7.4.5 is working great for me, and it appears for others here as well. I am running a new octo-2.8GHz Mac Pro.

Best Format for Archiving Video Files

I am importing old VHS and 8mm family videos for my cousin, to both burn them to DVD, and to archive the movies in case he wants to edit them later.
I am planning on purchasing for him, a "write once," external HDD, probably firewire, (though I am open to suggestions), to put both the backup Video TS folders on, as well as the Quicktime movies themselves.
My guess is, the best format for the QT movies would be their original DV-NTSC, but at around 13GB an hour, this can add up pretty fast.
The h264 .mov codec looks great, takes forever to render, and it seems the file size difference to DV-NTSC is nominal at best.
Obviously the future is some kind of HD, so these movies will never look great years from now, but I want them to be preserved for him at the best quality possible, at the smallest file size, if it will not compromise the quality too much.
I know I can render them significantly smaller as h264 .mp4 files, or as DIVX, (which also takes a long time), but I imagine they are of significantly reduced quality that would be visible in future video editing he might do.
If DV-NTSC is the only way to go, so be it. But if not, then any suggestions for what other format I could use to save these QT files, without visible loss of quality is greatly appreciated.

Thanks for all the advice. And I mean everyone.
Here is my latest dilemma.
Though 15 years old, the original Vhs's play beautifully. Aside from some (expected) glitches in the beginning or end of some of the shots, the video has not degraded appreciably. This is great news, as my cousin wanted to make back ups before degradation begins.
First, I captured the Vhs movies and corrected some bad color, mostly due to poor white balancing, and on the computer, they looked great in comparison. I burned DVD's and they looked terrible in comparison with the originals. Now I know I am going to lose some resolution when going to DVD, but it seemed harsh, so I ran some tests.
I burned a DVD of the original capture, with no color correction, just the raw footage and the DVD did not look much better, so it wasn't the color correction.
Not satisfied, I made a copy from the FCP timeline straight to Vhs, (I should note, through the ADVC-110.) This looked significantly degraded as well.
Finally, I made a straight dub from Vhs to DVCam, figuring that had to look good, and that also looked significantly degraded, compared to the, (now looking pristine), Vhs original.
As the original Vhs looks so good, what good would a TBC do? Or a proc amp?
Is there some secret to capturing and exporting Vhs that I am missing? Or, will it always look significantly degraded, even straight to DVCam?
+David Murray wrote: There is an industrial way to get good VhS copies but it is extremely expensive+
I don't know what this is, but I am sure it is clearly out of our league, but David M., if you are still following this thread, I'm curious, would this ultra expensive method actually result in a dub that looks like the original? I am actually really shocked at how bad the straight DVCam dub looks. It really does not look much better than the color corrected, computer exported version.
The Vhs tapes of my cousins daughter are as precious to him as anything he has.
As they date back 15 years, he is concerned about the longevity of the tapes.
As there are over forty hours of them, he wants them to be in an editable format, so later he or his daughter can make a highlight reel, or whatever. So thus the QT movie archive/backup on HD.
Whether as Finalcutter said, that this drive, even if unused, and put in a cool dry safe, might not function years down the line, makes it iffy, but what other choice is there for editable versions, unless I break the QT movies up into 20 minute chunks and archive them to over a hundred DVD's instead. Perhaps that is the safest solution, though certainly time consuming.
As failure of the HDD somewhere in the future is likely, though not certain, I am still not sure that the HDD holding all his QT movies for future editing is the wrong way to go.
As it is a digital version, and not an analog copy, I get that a DVCam backup of the originals is the best option. I will suggest to him that we do this as well, even though he does not have DVCam himself. But again, is there something I am missing here? Why does the Vhs to DVCam copy look so degraded? Is there anything I can do to keep the original quality, or will it die with his original Vhs as it slowly degrades over time?

Best MacBook for Creating Video

I need help choosing the best MacBook for creating sports videos using either iMovie or Final Cut. I currently us a Mac Mini but I want to purchase a laptop to be more mobile.

Any layer may be replaced with new footage by simply selecting the layer you want to replace in the composition, then selecting the new footage in the project panel, then holding down the Alt/Option key and dragging the new footage to the composition.
If you want to automate the process of replacing footage you'll have to use a script.
If you want to use a project as a template then simply copy the template file in it's folder and paste it into a folder that contains the same structure as the template. IOW, the folders should look like this:
Template Project
     >template.aep
     >Footage
New project
     >copiedtemplate.aep
     >Footage
Your footage has to have the same filename as the original template project.
You can also save an AE project as a template (aet) project. That's what they are doing on siges like Video Hive. The template isn't easily overwritten so it maintains the work. Then you simply add your footage using the first technique that I talked about.

Best ideas for a video deck

Similar Messages

Maybe you are looking for