Best Log Setting for ASA & MARS

Hi,
I'm going back and trying to clean up our MARS install a little bit now that I have some time. I need to update MARS to the latest version, but right now I'm just trying to wade through some of the undefined logs coming from our ASA. Is there any guideline as what is the best log settings to use comming from the ASA for MARS? Right now it looks like everything is setup to be forwarded. Anyone have any suggestions for what they have their log settings at to capture the best amount of information, but not have to wade through everything else?
Thanks

Which syslogs are these specifically? We don't get any undefined events from our FWSM(s)? We get a plenty from the Netscreen (but AFAIR this is documented on CCO) that the support is not 'complete' as of yet.
The recommended level for ASA/PIX as per the Cisco Guide and 'many' discussion on Cisco MARS User Group is 'debugging'. Under normal operation not a lot of level 7 messages are generated.
Regards
Farrukh

Similar Messages

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

What is the best export setting for video on blogger

What is the best export setting for video from premeire to blogger.com or blogspot.com

I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

MOVED: Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

This topic has been moved to AMD64 nVidia Based board.
Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

If you want SSE3 support and you do not overclock, Bios 1.4 is the only one officially available (1.41beta is not official).
Try to upgrade to 1.4 and see it for yourself, do the upgrade with floppy in DOS so that you can save your old Bios.
I would rather wait till mid June when a less troublesome new bios is suppose to be availabe for NEO4 MBs.

Best export setting for HD Video

I am currently woriking with Final Cut Express HD and I am new to the whole HD experience. I would like to know what is the best exporting setting for FCE to be copied on DVD and viewed. I am currently working on a wedding project with a JVC Pro HD camera GY-HD110 720p. Any help will be appreciated. Thank You.

This is a question better asked in the FCE forum located at the link below:
http://discussions.apple.com/forum.jspa?forumID=936

What is the best compressor setting for dvds

What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

correction the bit rate is 7.5

What is best network setting for jetpack mifi 5510l

I live in a rural area with poor signal. No 4G and limited 3G. We got an antenna that boosts phones from nothing or 1X one bar to 3G and 2-3 bars inside the house. What is the best network setting for jetpack? It doesn't seem to work as well.
Automatic and 4g don't work. I don't know what CDMA Auto or EDVO stand for.
Any suggestions for improving strength would be appreciated. I know I won't get a great connection but a steady connection sure would be great.

> What is the best network setting for jetpack?
Not sure what you mean. The jetpack will automatically configure itself to whatever signal it currently has access to. Shouldn't have to configure any network settings.
> I don't know what CDMA Auto or EDVO stand for.
Those are the old 3G networks.
> Any suggestions for improving strength would be appreciated.
Perform what is known as a Site Survey and evaluate your current environment:
http://3gstore.com/page/13_will_an_antenna_help_me.html
After you generate some numbers then look up what they mean in the Interpret the Results tab. You mentioned that you already purchased an antenna so there may not be anything else you can do as the local towers in your area are not good enough to reach inside your home.

Best logging option for SharePoint 2013 on-premise application

What is the best logging option for SharePoint 2013 on-premise application?

Hi,
According to your post, my understanding is that you want to know the logging option in SharePoint 2013.
SharePoint has its own logging system called “Unified Logging System (ULS)“, we can use the ULS log to see if anything unexpected occurred, we can use the
ULSViewer for more convenient log viewing experience.
Or we can log information programmatically.
There are some logging classes can be used, such as
SPMonitoredScope , SPDiagnosticsService, or create your own “Diagnostics Service” – which is technically just a new class inherited
from SPDiagnosticsServiceBase.
We can also utilize diagnostics.asmx web service for the client side applications.
For more reference:
http://www.codeproject.com/Articles/620996/Five-suggestions-to-implement-a-better-logging-in
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Export Media from DV Pal to AVI: Best recommended setting for Output file?

I have a project in CS4, on Windows, in DV format (original videos were M2t).
What is the optimal setting for export (and possibly for the sequence settings too) for the best quality and then smallest size?
If my input is M2T files - is the best settings to work in Premiere is DV 1 for Pal?
I always use Progressive Interlace - is that required or is the default of Lower field OK as well (I am not sure exactly what is the impact of using just one field, but from previous versions of Premiere Progressive always improved the video image)?
Is the frame rate of Pal as 25 FPS must be adhered in the sequence setting and export to avoid re-rendering?
As for the Export side:
Is using the DV Pal is best for quality without going uncompressed?
Is starting with 16GB of DV as m2T and ending with 20GB of DV reasonable?
Is the method of exporting to DV and then compressing it using a 3rd party is the best way going about the creation of the movie and then compressing it for distribution?
What is the the recommended tool for compressing - and with which format?
The end result is meant to be consumed as an AVI on people's desktop. Not on mobiles or YouTube or DVD.
On BitTorrent I see many files that are in HD but have an amazingly small size of less 1 GB - what do these guys use to achieve such small sizes yet amazing quality?
What is the best tool and codec to achieve a compression based on a file size?
Is DivX better than XVid? And is "Multipass nth pass" is the way to configure the DivX for best results?
I really feel we lack any guidance on these aspects and a huge of time is wasted every time I get to this stage when it should all be pretty standrad for me.
I know I am asking a number of question but if someone is able to jot down the basics of the tool, codec and settings to achieve best quality (regardless of the time it takes to get to it) - I'd be very grateful!
Merry Xmas and a Happy New year to all,
Eroka00

I find your post somewhat confusing.
These m2t are they converted?
Run a file that you are using in Prmeiere through Media Info and post a screendump.
http://mediainfo.sourceforge.net/nl
What is the endproduct going to be? YouTube, DVD, media player or .....

Best security setting for TC? WPA, WPA2 clarification?

I am using TC just as a wireless hard drive. What would the best security setting be? I am confused by WPA Personal and WPA/WPA2 Personal?
Thanks in advance!

With the TC the choices are: WPA/WPA2 Personal, WPA2 Personal, WPA/WPA2 Enterprise, and WPA2 Enterprise.
The basic difference between WPA & WPA2 is the encryption type. WPA uses Temporal Key Integrity Protocol (TKIP), whereas WPA2 uses either TKIP or the stronger Advanced Encryption Standard (AES) encryption.
WPA/WPA2 Personal allows for both types of clients to connect, whereas, WPA2 Personal only allows clients that support AES.
The strongest security of the two would be to use WPA/WPA2 Personal with all clients (Mac and PC) running WPA2.

HT4110 What is the best battery setting for the MacBook Pro 13 Retina display?

I want to know the best setting for the battery for the MacBook Pro 13 Retina display.

To add just a little
Keep it plugged in when near a socket so you keep the charging cycles down on your LiPo (lithium polymer) cells / battery, but not plugged in all the time. When not being used for several hours, turn it off.
And best "tip" is if its near a socket,...plug it in as long as you can (especially at home) since cycle count on the battery are the "miles that wear out the tires (battery)", however again, not plugged in all or most of the time.
http://www.apple.com/batteries/notebooks.html
"Apple does not recommend leaving your portable plugged in all the time."
General rule to remember of Lithium batteries is:
Never drain them LOW & dont always/often store them HIGH
While cycle count is commonly seen to be the “miles” on your Lithium Ion pack cell in your Macbook, which they are, this distinction is not a fine line at all, and it is a big misconception to “count charge cycles”
*A person who has, for example, 300 charge cycles on their battery and is recharging at say 50-60% remaining of a 100% charge has better battery usage and care than another person who has 300 charge cycles at say 15% remaining on a 100% charge.
DoD (depth of discharge) is far more important on the wear and tear on your Macbook battery than any mere charge cycle count. *There is no set “mile” or wear from a charge cycle in general OR in specific.    As such, contrary to popular conception, counting cycles is not conclusive whatsoever, rather the amount of deep DoD on an averaged scale of its use and charging conditions.
                          (as a very rough analogy would be 20,000 hard miles put on a car vs. 80,000 good miles being something similar)
*Contrary to some myths out there, there is protection circuitry in your Macbook and therefore you cannot overcharge it when plugged in and already fully charged
*However if you don’t plan on using it for a few hours, turn it OFF (plugged in or otherwise) ..*You don’t want your Macbook both always plugged in AND in sleep mode       (When portable devices are charging and in the on or sleep position, the current that is drawn through the device is called the parasitic load and will alter the dynamics of charge cycle. Battery manufacturers advise against parasitic loading because it induces mini-cycles.)
Keeping batteries connected to a charger ensures that periodic "top-ups" do very minor but continuous damage to individual cells, hence Apples recommendation above:   “Apple does not recommend leaving your portable plugged in all the time”, …this is because “Li-ion degrades fastest at high state-of-charge”.
                    This is also the same reason new Apple notebooks are packaged with 50% charges and not 100%.
LiPo (lithium polymer, same as in your Macbook) batteries do not need conditioning. However...
A lot of battery experts call the use of Lithium cells the "80% Rule" ...meaning use 80% of the charge or so, then recharge them for longer overall life.
Never let your Macbook go into shutdown and safe mode from loss of power, you can corrupt files that way, and the batteries do not like it.
The only quantified abuse seen to Lithium cells are instances when often the cells are repeatedly drained very low…. key word being "often"
Contrary to what some might say, Lithium batteries have an "ideal" break in period. First ten cycles or so, don't discharge down past 40% of the battery's capacity. Same way you don’t take a new car out and speed and rev the engine hard first 100 or so miles.
Proper treatment is still important. Just because LiPo batteries don’t need conditioning in general, does NOT mean they dont have an ideal use / recharge environment. Anything can be abused even if it doesn’t need conditioning.
From Apple on batteries:
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
Peace

Best exporting setting for web

What will be the best exporting setting from FILE>EXPORT> to share a HD projet on the web.
Jean

Convert it to h.264.
Try this:
File - Export - QT Conversion...
Make sure QT movie is selected and where it says default... change it to Broadband High.
Then go into the OPTIONS button and change the size to reflect the 16:9 aspect ratio...
That will give you the quality you want I'm sure.
As for # megs... well -- try a smaller SIZE option and then force it 2x or 1.5x from your web page.
Good luck,
CaptM

Best Capture Setting for MiniDV

Does anyone have any suggestions on the best capture setting in FCP 6 for MiniDV tape (NTSC not PAL). Can I capture it with the Pro Res setting or should I capture it in another setting and then edit with the sequence setting set to Pro Res?

Capture and edit the material in its native format. DV-NTSC has it's own special Easy Preset. Select it and have at it.
You gain nothing except huge file sizes when converting DV into ProRes.
x

What is the best proejct setting for editing h.264 video?

I have captured hours of VHS footage via an Elgato Video Capture device for Mac.   Captured video is in H.264 format.
Trying to edit the video in Adobe Premiere Elements 10, but it is being very fussy.   Takes a long time to import media. Once in and a few cuts are made, timeline drags and freezes repeatedly.   This was with a setting for HDV 720p 30.
Is my problem with the project setting? I hope so. But I also hope I can figure out what the proper setting should be.   Any thoughts?
Footage is decades old. Not the best quality, of course. I do want the final project to look as good as possible and be in Widescreen for uploading to Youtube.

Here are the propertites of the captured video:
Format                           : MPEG-4
Codec ID                         : M4V
File size                        : 1.37 GiB
Duration                         : 2h 1mn
Overall bit rate                 : 1 613 Kbps
Movie name                       :
Recorded date                    : 2013-08-22
Encoded date                     : UTC 2013-08-22 13:15:21
Tagged date                      : UTC 2013-09-01 07:00:53
Writing library                  : Apple QuickTime
Cover                            : Yes
stik                             : 0
tvnn                             : S-Video Input
iTunMOVI                         : <?xml version="1.0" encoding="UTF-8"?> / <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> / <plist version="1.0"> / <dict> /     <key>asset-info</key> /     <dict> /         <key>file-size</key> /         <integer>1467486295</integer> /         <key>flavor</key> /         <string>4:640x480</string> /         <key>high-definition</key> /         <false/> /         <key>screen-format</key> /         <string>standard</string> /         <key>soundtrack</key> /         <string>LC</string> /     </dict> /     <key>cast</key> /     <array/> /     <key>codirectors</key> /     <array/> /     <key>copy-warning</key> /     <string></string> /     <key>directors</key> /     <array/> /     <key>producers</key> /     <array/> /     <key>screenwriters</key> /     <array/> /     <key>studio</key> /     <string></string> / </dict> / </plist>
Video
ID                               : 1
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : No
Format settings, ReFrames        : 3 frames
Codec ID                         : avc1
Codec ID/Info                    : Advanced Video Coding
Duration                         : 2h 1mn
Bit rate mode                    : Variable
Bit rate                         : 1 499 Kbps
Width                            : 640 pixels
Height                           : 480 pixels
Display aspect ratio             : 4:3
Frame rate mode                  : Constant
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.163
Stream size                      : 1.27 GiB (93%)
Language                         : English
Encoded date                     : UTC 2013-08-22 13:15:21
Tagged date                      : UTC 2013-08-22 13:15:21
Audio
ID                               : 2
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format profile                   : LC
Codec ID                         : 40
Duration                         : 2h 1mn
Bit rate mode                    : Constant
Bit rate                         : 110 Kbps
Nominal bit rate                 : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Compression mode                 : Lossy
Stream size                      : 95.6 MiB (7%)
Language                         : English
Encoded date                     : UTC 2013-08-22 13:15:21
Tagged date                      : UTC 2013-08-22 13:15:21

Best EQ setting for new Earpods?

What is the best EQ settings for the new Earpods?

I have my EQ set to jazz, and the results are remarkably better than anything previously made by Apple!! I think they've done a great job with these new EarPods. I also find them to be much more comfortable.

Best Log Setting for ASA & MARS

Similar Messages

Maybe you are looking for