Best non-BT Router for BT Vision Use

Just a question thats been going through my head...
Was the best Non-BT Router (Not HomeHub etc...) for giving a decent connection for BT Vision use??
Im guessing it would have to support this QOS thingy..
has anyone had any positive experiences using a Non BT Router over a longish line while not getting any BT Vision C01/V04 Errors??
JC

same as above I have used both netgear and Dlink routers with bt vision without any problems and have used a netgear router configured as an Ethernet switch (asdl and dhcp turned off ) connected to the homehub to extend the number of ports available.
i am using a white homehub at the moment simply because i want to use the hub phone
no trees were harmed in the sending of this message but millions of electrons were terribly inconvenienced

Similar Messages

Best non-SSD drive for early 08 Sata I?

Hello everyone, what would be the best non-SSD HD for an early 08 machine? I'm currently still using the 5400 250GB one that came with this machine so I'd imagine any current drive would be a huge step up from this one in terms of speed despite being held back by SATA I. I would like for this machine to be used as a on the road Final Cut/Soundtrack so I'd prefer at least a 500GB drive.
What would you all reccomend in the 7200 speed range? Should I bother with the Momentus XT hybrids or just stick with a traditional drive?

I agree with Templeton Peck, there is no 'best' drive.
Kappy's suggestions of Seagate drives is valid (I use them without any problems to date) but I would be hesitant about the hybrid version. There have been issues reported in the past and personally I question the cost/benefits they afford. I would rather spend the money on a 750GB 7200RPM drive instead, especially if you are going to do a lot of video work.
Remember that when you replace an internal HDD, you back up (Time Machine) drive should be at least the same capacity, thus you should think in terms of two HDDS.
Though you did not mention in your post, consider adding RAM if you have not done so already.
Ciao.

Inquiry - Best Linksys/Cisco router for Gaming and Media Streaming?

Help! I live in a two bedroom town home and have an old little Belkin router. I'm switching to a Linksys but I need to know which model is best for my home. I have two sons that share a room and they both play XBox live, usually at the same time. I'm usually using the internet or watching a movie on Netflix with my wife. Sometime both while the boys are playing upstairs. I don't need multiple USB ports or gigabit ports. I wouldn't know what to do with them. I just want something faster than what I have now. We have Time Warner Cable's Roadrunner internet service if that helps.

I would recommend EA4500 as it is a high performance router for home entertainment which is ideal for faster streaming of HD video and music plus multiplayer gaming. Please click on the following link to know more features of this router: http://homestore.cisco.com/en-us/Routers/Linksys-EA4500-Dual-Band-N900-Router-with-Gigabit-USB_stcVV...

What is best non apple monitor for Mac mini

What is the best non Apple monitor that is 21.5" for under $200 that can be used with a new Mac Mini?

I like both my older $200 LG Flatron and newer $160 Samsung SyncMaster monitors. Both have (digital) DVI input, the LG is on the Apple Supplied HDMI to DVI Adapter and the Samsung is on a MiniDisplay Port to DVI adapter.
Just beware that you can only use one older (analog) VGA monitor on the Thunderbolt/Display Port with Apple's MiniDisplay Port to VGA adapter and you should look at ones that support (digital) HDMI, DVI and/or DisplayPort inputs.

Best Way of Exporting for iDVD when using FCP?

What would anyone recommend in terms of getting the best output from FCP for making an iDVD?
I usually export as a self-contained QT movie. Is there a better way?
J.M. Prater

There's an easier way... export a non self contained movie. The result will be the same... just faster file export and smaller file to boot.
DVD SP will make a lot better looking DVD's if you have that. The encoding done through Compressor is better than what can be done in iDVD.
Jerry

Best Non secured card for me using transunion ....

im looking to get a non secured card. my transunion score is 621. i have two baddies on my report (Loan and Lease) 5 months old and 2 years old. was approved for secured capital one which im waiting for it to report. i was hoping to get a non secured cc or store cc. any suggestions etc. thnk you

moneyshot23 wrote:
im looking to get a non secured card. my transunion score is 621. i have two baddies on my report (Loan and Lease) 5 months old and 2 years old. was approved for secured capital one which im waiting for it to report. i was hoping to get a non secured cc or store cc. any suggestions etc. thnk youThe baddie is too recent for Barclays. I'd stay away from thme until at least a year. Are there any particular stores you like to shop at?

Best, user-friendly router for parental controls??

Hi all - I purchased the EA3500 but not sure it's features are the best for my purposes ... one teenager with a number of devices:
pc desktop
smartphone
ipod
macbook
ipad
xbox
I also have an iphone, an ipad, and apple t.v. I want to restrict his access both the amount of time each day and final turn-off time. I've read here that there's a bug re: IPv4 and IPv6>
Also it has to be really user-friendly for me to set up. I'm somewhat computer illiterate (not a techy!).
Recommendations? Thanks much.

I have gathered some useful articles below to help you in setting up the router, configuring parental control settings as well the wireless and knowing more about it that may benefit your network. I hope these will help.
Linksys Smart Wi-Fi Router, EA3500 Frequently Asked Questions
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=30f459a78aaa42ca9adcb20818346816_EA3500_Frequently...
Setting up the Linksys Smart Wi-Fi Routers, EA6300, EA6400 and EA6700 using Smart Setup
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=38cde2cfa77a45aaa96187c5ae05fa45_Setting_up_the_Li...
Changing the basic wireless settings of your Linksys Smart Wi-Fi Router using your Linksys Smart Wi-Fi Account
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
Setting up Parental Controls using the Linksys Smart Wi-Fi Account (Video)
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=27042
How to restrict Internet access on specific times using Linksys Smart Wi-Fi Account
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88998072f086421d9ec86109576b58e4_Restricting_Inter...
How to disable restricted Internet access on specific devices using your Linksys Smart Wi-Fi Account
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9acb174873c24afba2f56aefdf497683_Disabling_restric...
Setting up the Parental Controls feature of your Linksys Smart Wi-Fi Router
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0720688ed58d4e458348cfe32f13cb15_KB_EN_V1.xml&pid=...

Best VPN Firewall Router for iPhone

Hi,
I am looking for opinions regarding VPN routers that will let me connect with the iphone. I'm setting up an office computer network with about 10-20 computers and plan to tunnel in with iphone and macbook when away from office.
Also, I am looking at a second location, so the ability to have a router to router VPN between two separate office would be a big plus!
Thank you,
Jake
iphone version 3.13

This seems to be a topic that is not easy to answer. Why? There are a lot of variables. Seems like iPhone supports ipsec/l2tp/pptp but when I tried to connect to a pix506e using ipsec/udp (NAT-T) it just kept failing even though I knew all the settings are right. If you are looking for a cheap solution like a cisco small office router/ or a open source firmware for a wifi router, no luck. Cisco ones support some "easy" vpn solution, or a router to router vpn, and the dd-wrt or tomato variant mostly support open vpn or pptp (but I am still researching the pptp right now). Best bet is a VPN appliance like a cisco asa or a sonicwall. you get what you pay for and you should get support as well. AN asa 5510 will do it. or one of the sonicwall units should work.

Best wireless modem/router for Comcast internet service?

Hello!
I am looking to switch internet service from Verizon DSL to Comcast. I have a MacBook Pro using Airport Extreme (supports 802.11 a/b/g/n), and my other computer is an iMac (OS 10.5.8, iMac 6,1), with a printer and a Roku box (I'm also thinking about switching to Apple TV). All are currently set-up wirelessly with a combined modem/router.
I know that there is a list of a bunch of potentials on the Comcast website, but I'm looking for real experience from Mac users. Good, bad or neutral comments are appreciated.
Thank you!
Ken

Don't pay Comcast monthly for a router. Buy a router. A router is a router, the best routers are Cisco based rackmount devices. Honestly the AirPort Express and Extreme are amazing and work quite well with Apple products. Plus if you purchase one and get AppleCare on it you get AWESOME support from your friendly AppleCare advisors... sure as **** beats going to India and talking to Fred.

Best N wifi router for 2007 draft N macbook ?

I read that there can be a lot of N wifi compatability issues with these early draft N. laptops...
For a location servicing several PC laptops and one 2007 draft N MacBook, can anyone tell me what would be the best new router to buy?
Price is an issue... unless it is absolutely necessary, am trying to avoid buying the latest, greatest and most expensive.
Preference is also not for an Airport Extreme unless that is the only viable option.
All tips appreciated.

dbota wrote:
Thanks for responding.
What particular LinkSys Wifi router do you have that works well with your son's 2007 draft N macbook pro? There are number of models now. Also, do you have any idea of whether your son's macbook actually get's N speed connectivity?
It's a [WRT310N|http://www-id.linksys.com/servlet/Satellite?c=LProductC2&childpagename=ID%2FLayout&cid=1175242816979&pagename=Linksys%2FCommon%2FVisit orWrapper&lid=1697985430B01]. I can only assume that he gets N speeds or he would have mentioned it. I'll have to get back to you about any details that you have concerning his connections. He is in college and this is his winter break so I don't see him too much. The balance of our network that uses G is enjoying increased wireless coverage and an increase in bandwidth availability.

Airport Extreme with ATT Router for Open DNS use

I'd like my whole home network to have a filter on it so all computers and hand devices are protected. I get my internet with an ATT router which I can not change the DNS servers. ATT says they can not be changed. But I have an airport extreme directly connected to the ATT router. The extreme supplies wi-fi to the house. I can not change the DNS settings in the extreme. They are grayed out. I'm assuming it has something to do with the connection to the ATT router. Does anyone know how I can put a DNS address in the extreme?
Some of the settings on the extreme are:
Internet Tab: connect using DHCP, DNS Servers "grayed out", Domain Name "grayed out"
Network Tab: Router Mode (off (bridge mode))
thanks!

Does anyone know how I can put a DNS address in the extreme?
Not sure what you mean that you cannot enter the DNS numbers on your AirPort Extreme configuration page.
Open up AirPort Utility and select the Internet tab
Look at the first DNS entry there. There should be a cursor at the beginning of the DNS Server Box. If not, click to set the insertion point at the beginning of the box.
Simply start typing in the DNS server number that you want to use.....208.67.222.222...... and it will overwrite the grayed out values there.
Do the same for the second DNS box....208.67.220.220.
Click Update at the lower right and you are all set.

Best ATV-2 settings for ripping DVDs using Handbrake

I have a large dvd library that I want to get into itunes for the ATV-2 as well as the ability to use on my iOS4 devices. Can anyone share their experiences?

If you're talking about commercial, encrypted DVDs, the terms of use of these forums prohibit discussion of software or methods of breaking the encryption/copying them.
For unencrypted DVDs, Handbrake is one of the most recommended applications.
Best of luck.

What is best non-apple display for 15 inch macbook pro with retina display?

I am looking for a good and reasonably priced monitor to use with my MBP retina. I prefer one that rotates 90 degrees for portrait viewing. Any suggestions?
What adapter is needed to get good quality? Is the dual link adapter worth $100? Is it very much clearer than DVI? How does the HDMI connection compare? I've heard that HDMI only works as an external display in clamshell mode (computer closed). Does HDMI transmit sound and video or would I need two cords?
Thanks for any help!

The dual-link adapter is needed only for resolutions over 1920 x 1200. It won't improve the picture of lower resolution displays.
HDMI carries audio and video (up tp 1920 x 1200).
DVI (single or dual-link) is video only.
Mini DisplayPort (or DisplayPort with an adapter cable) is audio and video (up to 2560 x 1600).
All will give the same picture quality.

What is the best way to compress for streaming internet use?

I have been having some problems using compressor when using the Mpeg-4 internet streaming option. I am compressing from Final Cut Pro HD.
When I send these 1 to 2 1/2 minute clips to compressor, it opens up the batch monitor, and within a split second, it vanishes and doesn't compress at all. What could be causing this?
Am I doing something wrong?

Compressor is a good way to do it if you have a large batch and have other things to do. For quick one-offs, I use QT 7 Pro.
They get all the way to the Batch Monitor, then you never see the successful message? I would try some trial and error experiments. Export to QT mov. Then load that to compressor. The link between FCP and Compressor could be broken. It happened to me.

What is the best 802.11G router for both B and G laptops?

I have an older laptop with 802.11B wireless. This is a work provided computer, so I can not make any mods. I have a personal one that is G. I read that the WRT54GS does not play well with B's and the WRT54G has connection problems. I don't know if I capable of doing the flash that I keep reading about. Did Version 8 fix any of the problems? What about the GX, GX2 or GX4?
Thanks

well WRT54GS should work with 802.11B, if you go for WRT54G router then i would suggest you to buy a version WRT54Gv6...

Best non-BT Router for BT Vision Use

Similar Messages

Maybe you are looking for