Best practice concerning embedding script in report vs. controlling from Java

Hi,
I'm faced(probably not the only one) with adding some intelligence to my reports. In a prior post I was curious about displaying/hiding sections based on conditions found in the bean/pojo.
Is there a best practice concerning embedding logic in the report in the form of formula(s), vs. using Java to get or create a field and then creating a formula on the fly? I suspect the answer has something to do with truely dynamic fields, and perhaps a little bit of both Java, and script.
Anyone on staff care to try answering??
Peter

Hi,
log into your SAP ERP system using the SAP GUI and choose in the SAP Menu the following path:
SAP Menu -> Accounting -> Controlling -> Cost Cetner Controlling ->Environment->Set Controlling Area.
Set the desired controlling area for your user there (DO NOT FORGET TO CLICK ON THE DISKETTE ICON) and try again.
Regards,
Stratos

Similar Messages

Best Practice for embedding webi reports in hyperlinks..

SAP Community
What is the best practice for embedding hyperlinks (email) from webi and sending to a user?so the users can quickly consume the report with minimal effort (click link and launch infoview/report).
John

As mentionned already, BI has it's own inbox, and/or SMTP integration for broadcasting.
Else, if you go to Folders, right click on your report instance, then select "Copy URL" (or 'docuemnt link' i cannot remember the exact term.) - that woudl give you an open document link to invoke the viewer .
Regards,
H

Is there a best practice for deleting a published report?

Post Author: matthewh
CA Forum: General
Is there a best practice for deleting a published report from C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\FileStore on Crystal Reports Server or can I just delete the subfolders? Does it reference them elsewhere? I have a load of old reports I need to shed, but can't see how to do it.

Hi,
You can refer the SRND guide. As per document (page -292)
you can configured -You can add a maximum of 50 agents per team.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ippcenterprise9_0_1/design/guide/UCCE_BK_S06086EC_00_srnd-9-0-1.pdf
Also you can check the Bill of Material document of UCCE , under the section "Operating Conditions, Unified ICM, Unified CC" What are the number should configure in UCCE.

Best practice to share user defined reports?

What is the best practice to share user defined reports among team members?
Currently I can create a folder under the Reports/User Defined Reports system folder and any reports or subfolders under that can be exported into xml by right-clicking on the folder and selecting 'Save As'. Then sending the file over or put it on a shared point or check in to SVN, then the other team members can right click on the User Defined Reports system folder and chose "Open report..." and select the xml file.
Is there any more elegant way?
Is it a good idea to share the C:\Users\lgal\AppData\Roaming\SQL Developer\UserReports.xml on Windows, or ~/.sqldeveloper/UserReports.xml (on Linux) among users?
Is there a standard way to bring this under standard SVN control in SD?

I think the best thing would be if someone set up a config sharing site!
It would be very easy to do on system like drupal or e107. People could register and submit their configs to different download sections based on what sort of configs they are. My site runs e107 so it's not hard to see how easy it would be
It would be easy to set up - I could do it in about 30mins but I think I have done more than enough of that! There seems no need to officialize it to any degree and burden the server even more.
I guess user-cb could host it couldn't? If you restrict people to posting only small config files with no icons and link to big stuff offsite it should be tiny bandwidth usage.
That's what I would do anyway

HT201407 I administer 50 phones. Looking for best practices concerning iCloud. This program and my users have made it difficult to reuse phones when persons are terminated.

Several times I have had to chase after terminated employees for iCloud accounts and passwords. It has been a nightmare. How do I remove iCloud accounts from company devices, or better yet, prevent users from creating personal icloud accounts? What are the 'best practices' concerning the use of iCloud?

Several times I have had to chase after terminated employees for iCloud accounts and passwords. It has been a nightmare. How do I remove iCloud accounts from company devices, or better yet, prevent users from creating personal icloud accounts? What are the 'best practices' concerning the use of iCloud?

Report in excel from java

I'm generating report in Excel from Java.In this is it posssible to place background color upto the text in the single cell

If you are using POI, you can set the background colour for a single cell.

What is best practice in FR ? Original Report access to Users or Snapshot

Hi,
can any one pls. let me know on what is the best practice in FR ? I need to give access to original reports to my users or the snapshot access only ? Users are not happy with snapshot access mainly during the closing time. What are the complications if i give access to original reports ? I'm using Batch scheduler, but users are unable to see the data some times. What will be the reason for this ?
Thanks,
PVR

Hi,
There are certainly many variables to have a look at. Server sizes is one concern, report size is another. Giving access to original reports is fine as long as concurrency and heavy usage don't take the servers down. That said, the reports that will be given access to their originals shouldn't run for 10 minutes for each query. Having 10 user connected to such reports will probably take reporting services down which makes the entire system useless. These types of reports should better be scheduled and shown as snapshots. However, some of these reports might have time-dependent information which needs to be refreshed at query time. In this case you could either give the access to original reports or schedule the reports to run say every 2 hours.
Cheers,
Alp

BEST PRACTICE FOR THE REPLACEMENT OF REPORTS CLUSTER

Hi,
i've read the noter reports_gueide_to_changed_functionality on OTN.
On Page 5 ist stated that reports cluster is deprecated.
Snippet:
Oracle Application Server High Availability provides the industrys most
reliable, resilient, and fault-tolerant application server platform. Oracle
Reports integration with OracleAS High Availability makes sure that your
enterprise-reporting environment is extremely reliable and fault-tolerant.
Since using OracleAS High Availability provides a centralized clustering
mechanism and several cutting-edge features, Oracle Reports clustering is now
deprecated.
Please can anyone tell me, what is the best practice to replace reports cluster.
It's really annoying that the clustering technology is changing in every version of reports!!!
martin

hello,
in reality, reports server "clusters" was more a load balancing solution that a clustering (no shared queue or cache). since it is desirable to have one load-balancing/HA approach for the application server, reports server clustering is deprecated in 10gR2.
we understand that this frequent change can cause some level of frustration, but it is our strong believe that unifying the HA "attack plan" for all of the app server components will utimatly benefit custoemrs in simpifying their topologies.
the current best practice is to deploy LBRs (load-balancing routers) with sticky-routing capabilites to distribute requests across middletier nodes in an app-server cluster.
several custoemrs in high-end environments have already used this kind of configuration to ensure optimal HA for their system.
thanks,
philipp

Best practice for nested scripting on UCCX

Hello All!
Newbie on scripting here and inheritted a HIGHLY customized UCCX environment. In looking at the scripts, it seems the system integrator built out the logic for every script within every script. That is, if one script queues calls into CSQ1 and if they are waiting for more than 2 minutes it sends them to CSQ2, it has all of the logic in that one script that the regular CSQ2 script has as well. So that means anytime "a change" has to be made, it has to be made to the CSQ2 logic in the CSQ1 script AND the CSQ2 script as well.
Is there a best practice for this? I would think it would be easier to say, in the above scenario that if the caller is waiting in CSQ1 for more than 2 minutes, it shoudl redirect the call to a trigger for the application that uses CSQ2. Thus the logic is in the respective scripts and not duplicated across the board.
Any thoughts and experiences on how this is best accomplished and maintained would be greatly appreciated!
Thanks!
JG

Yes, if all queue logic is the common for your different CSQs you can build one common script and then reference this script as a subflow from your main scripts and simply pass the CSQ name as a variable to it. This way you avoid what you said the need to rebuild logic in several places if you need to make a global change, you simply change the one common script logic.
HTH,please rate all helpful posts!
Chris

HCM Best Practice LOAD - Error in Copy Report variants Step

Dear Friends,
We are trying to use/load the HCM Best Practice data for testing purpose. We have applied the HCM Best Practice Add -ON. It went successfully. When we try to execute the Preparation step - (in Copy Varient Phase) using Tcode /HRBPUS1/C004_K01_01 we are getting the following error.
<b>E00555 Make an entry in all required fields</b>
Request you to provide some solution for the same.
Thanks and regards,
Abhilasha

Hi Sunny and others,
The main error here was sapinst couldn´t find and read the cntrlW01.dbf because this file was not on that location (/oracle/W01/112_64/dbs).
I already solved this issue... what I did was:
1º) As user ora I went in sqlplus as sysdba and I ran the following script (the control.sql script that was generated at the begining of the system copy process):
SQL> @/oracle/CONTROL.SQL
Connected.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORA-01081: cannot start already-running ORACLE - shut it down first
Control file created.
Database altered.
Tablespace altered.
2º) This is very important, is necessary to know where is the .CTL that was created with the script, so I checked what was the value of the parameter control_files in that moment:
SQL> show parameter control_files;
/oracle/W01/oraflash/W01/controlfile/o1_mf_6pqvl4jt_.ctl
3º) Next, logged with ora, for the sapinst read the value that it needed, I copied this file to the location/path that is needed for sapinst could read:
cp /oracle/W01/oraflash/W01/controlfile/o1_mf_6pqvl4jt_.ctl /oracle/W01/112_64/dbs/cntrlW01.dbf
4º) I ran the sapinst from the point he had stopped.
Thank you for your help.
Kind regards,
João Dimas - Portugal

Best Practice With Work Efficient in Report server

In SSAS cube I have two different roles:
- Manager (about 10 people)
- Salesman (about 43 people)
Manager has full access to 4 report and salesman has access to 1 report. Totally, it is five report.
I have the roles and its users in SSAS cube and when I deploy the cube I need to apply all 53 users in the report server.
I have created two map, named "aa" and "bb" in the index page. The manager has access to "aa" and salesman has acess to "bb". I have moved the document to these map.
What is the best practice to make right user to have right access to map and document in a efficient approach in report server?

Hi Sakura,
In SQL Server Reporting Services, we should verify that sufficient permissions have been granted for the user. At a minimum, we should grant the user the role that support both the "View reports" task and the "View folders" tasks to support viewing and folder
navigation in SQL Server Management Studio. For more information about system-level permission and item-level permission, please refer to the following document:
http://technet.microsoft.com/en-us/library/aa337491(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Any Best Practices for developing custom ABAP reports for Portal?

Hello,
The developers on our project are debating the best way to develop custom reports and make them available on the portal. Of these options that we can think of, can you give any pros & cons, or experiences, or other options?
- Web-enabled Abap report programs
- WebDynpro for Abap
- WebDynpro for Abap using ALV
- Adobe forms
Does a "Best Practices" document or blog exist on this topic?
Thanks,
Colleen

Re: Using p_trace=YES

What is the best practice concerning View Objects and List of values

Hi,
Let's take these two tables :
Market_Descriptions
Id
Name
Desc
Language_Id
Languages
Id
Code
Desc
Now, if I am generating these business components with the help of the wizard, I will be having two entities and two views.
If I am creating a list of value on the field Language_Id in Market_Descriptions table, showing the language code, everything works fine as long as this is drop as a Form but not as a table or read-only form.
What is the best practice for me to include/replace the language_id with the language code, since it is more user-friendly, on a read-only form or a table?
Thanks.

Hi,
Always have LOV on the field which we want show it on UI. Suppose based on below scenario, If you want to display Langaugae Description on UI, have LOV on Desc but not on Language_Id. Even though we can set display attribute in LOV configuration, but it will work only in forms but not in tables. In tables it will show language id instead of description.
Have LOV on Desc and make one more join with location Id in LOV configuration, so as soon as we select desc in LOV, location_id will be populated.
here is the join condition inside LOV
Languages.Desc = ViewAccessor.Desc
Languages.Id - ViewAccessor.Desc
Hope this will help you.
Dileep.

Best Practice for serving static files (gif, css, js) from front web server

I am working on optimization of portal performance by moving static files (gif, css, js) to my front web server (apache) for WLP 10 portal application. I end up with moving whole "framework" folder of the portal WebContent to file system served by apache web server (the one which hosts WLS plugin pointing to my WLP cluster). I use <LocationMatch> directives for that:
Alias /portalapp/framework "/somewhere/servedbyapache/docs/framework"
<Directory "/somewhere/servedbyapache/docs/framework">
<FilesMatch "\.(jsp|jspx|layout|shell|theme|xml)$">
Order allow,deny
Deny from all
</FilesMatch>
</Directory>
<LocationMatch "/partalapp(?!/framework)">
     SetHandler weblogic-handler
     WLCookieName MYPORTAL
</LocationMatch>
So, now browser gets all static files from apache insted of the app server. However, there are several files from bighorn L&F, which are located in the WLP shared lib: skins/bighorn/ window.css, wsrp.css, menu.css, general.css, colors.css; skins/bighorn/borderless/window.css; skeletons/bighorn/js/ util.js, buttons.js; skeleton/bighorn/css/layout.css
I have to merge these files into the project and physically move them into apache served file system to make mentioned above apache configuration works.
However, this approach makes me exposed bunch of framework resources, which I do not to intend to change and they should not be change (only custom.css is the place to make custom changes to the bighorn skin). Which is obviously not very elegant solution. The other approach would be intend to create more elaborate expression for LocationMatch (I am not sure it's entirely possible giving location of these shared resources). More radical move - stop using bighorn and create totally custom L&F (skin, skeleton) - which is quire a lot of work (plus - bighorn is working just fine for us).
I am wondering what is the "Best Practice Approach" approach recommended by Oracle/BEA - giving the fact that I want to serve all static files from my front end apache server instead fo WLS app server.
Thanks,
Oleg.

Oleg,
you might want to have a look at the official WLP performance support pattern (Metalink DocID 761001.1 ) , which contains a section about "Configuring a Fronting Web Server Serving WebLogic Portal 8.1 Static Artifacts ".
It was written for WLP 8.1, but most of the settings / recommendations should also to WLP 10.
--Stefan

What's the 'best practice' way to get email and fax number from vendor?

Hello *,
could anybody let me know what the 'best-practice' is to get the fax number and smtp address from the vendor master? Is there a preferred function module I should use?
Thanks a lot,
Torsten

Hi ,
try that:
TYPE-POOLS: szadr.
DATA adr_kompl TYPE szadr_addr1_complete.
DATA adr1 TYPE szadr_addr1_line.
DATA adtel TYPE szadr_adtel_line.
DATA admail TYPE szadr_adsmtp_line.
DATA adfax TYPE szadr_adfax_line.
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            addrnumber              = lfa1-adrnr
       IMPORTING
            addr1_complete          = adr_kompl
       EXCEPTIONS
            parameter_error         = 1
            address_not_exist       = 2
            internal_error          = 3
            wrong_access_to_archive = 4
            OTHERS                  = 5.
* Mail
LOOP AT adr_kompl-adsmtp_tab INTO admail.
    MOVE admail-adsmtp-smtp_addr TO atab-mail.
ENDLOOP.
* fax
LOOP AT adr_kompl-adfax_tab INTO adfax.
    MOVE adfax-adfax-fax_number TO atab-fax_number.
ENDLOOP.
regards Andreas

Best practice concerning embedding script in report vs. controlling from Java

Similar Messages

Maybe you are looking for