Best Practice for Customization of ESS 50.4

Hi ,
We have implemented ESS 50.4 on EP 6.0 SP 14 and R3 4.6C . I want to know what is the best practice for minor modification of ESS transaction . For eg : I need to hide the change button in Personal information screen .
Pls let me know .
PS : Guaranteed award points
Aneez

@Aneez
"Best Practice" is just going to be good ole' ITS custom development. All the "old" ESS services are all ITS based. What can not be done through config is then done by developing custom version of the ESS services. For what you describe (ie. the typical "hide a button" scenario) it is simply a matter of:
(1) create custom version(ie. "Z" version) of the standard service. The service file will still call the same backend transaction via the ITS parameter ~transaction.
(2) Since you are NOT making changes that require anything changed on the backend transaction (such as adding new fields, changing business logic, etc) you are lucky to ONLY have to change the web templates. Locate the web template in your new custom service file that corresponds to the screen in the transaction where the "CHANGE" button appears. The ITS naming convention for web templates is <sapprogramname>_<screennumber>.
(3) After locating the web template that corresponds to your needed screen, simply locate in the HTMLb where the "CHANGE" button code is and comment it out. Just that easy!
(4) Publish your new customized service and test it out directly through ITS. ie. via the direct URL to it: http://<yourdomain>/scripts/wgate/<yourservice>!
(5) once you see that it works, you can then make an iView for it in your portal (or simply change the iView you have to now point to your custom ITS service.
LOTS and LOTS more info on ITS development all around this site and in the ITS sepcific forum.
Hope this helps!
Award points or save them...I really don't care. I think the points system here is one of the dumbest ideas since square wheels. =)

Similar Messages

BI Best Practices for Customization

Dear Experts,
When I am developing BI reports by using mix of Standard BI Content and customized datasources at R/3 side.
In Standard BI Content also I am adding additional columns whereever required.
Now at BI side since I am changing structure/Update rule of cube/ODS, I am copying standard one to Z one.
If I want to make some InfoObjects as Authorization relevant I am copying it and changing that instead of changing original one.
I copied 0SALES_DIST to ZSALESDIS and made it Auth relevant, but I am able to use stadard DS for text (0SALES_DIST_TEXT) in ZSALESDIS which is already used in 0SALES_DIST.
I copied 0CUST_GROUP to ZCUSTGRP and added one attribute to it. I am not able to use 0CUST_GROUP_TEXT in ZCUSTGRP. I intend to use same DS.
0CUST_GROUP is Nav Attr in 0SOLD_TO so I have to copy 0SOLD_TO and use that customized in all my InfoProviders.
Even if I do that I am worried that there will be duplicate data for small small changes.
Can you please help me how to copy and customize the data model without disturbing standard data models.
Regards,
Tech Cheta

Hi,
BW SAP Retail
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/content.htm
Revaluation at Retail
http://help.sap.com/saphelp_nw04/helpdata/en/8e/65f438c842cc2be10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/73/d26594107711d4af1e080009d2232d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/35/e58282fe8711d3b49f006094b9301e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/39/e531c93747da4a8806612212b013b4/content.htm
www.service.sap.com/bi -->>solution detail -->>Industry Portfolios -->> Sap Retail
http://service.sap.com/bi
http://help.sap.com/content/documentation/industry/docu_is_retail.htm
http://help.sap.com/content/documentation/industry/docu_is_retail_retail.htm
http://help.sap.com/content/bestpractices/industry/bestp_industry_retail.htm
Hope this helps,
Regards
CSM reddy

Best Practice for ESS/ MSS role customization

Hi ,
I would want to know the best practice for role customization for ESS / MSS business package . For eg if my company does not want to use someof the workset like working time , travel etc , what is the best practice for this scenario .
anEEZ

Hi Aneez,
This is the link for complete best practices on NetWeaver
http://help.sap.com/bp_epv260/EP_EN/index.htm
Browse the Busines scenarios, you will find what you are looking for.
Now, these ones is specific for ESS and MSS
http://help.sap.com/bp_epv260/EP_EN/html/EP/N26_ESS.htm
http://help.sap.com/bp_epv260/EP_EN/html/EP/N27_MSS.htm
Hope this helps,
Kumar
P.S Reward Points for useful answers.

Best Practice for Portal Patches and effort estimation

Hi ,
One of our client is applying the following patches
1. ECC 6.0 SP15(currently SP14)
2. ESS MSS SP15(currently SP14 with some level of functional customization )
3. EP 7 SP18(currently SP14)
We would like to kwow the best practice for applying portal patches and the effort estimation for redoing the portal devt on the new patch.
o   What is the overall level of effort with applying Portal patches?
o   How are all the changes to SAP objects handle? Do they have to be
     manually re-entered?
o What is the impact of having a single NWDI instance across the
    Portal Landscape during the Patch process?
Regards,
Revathi Raju.

Hi Revathi,
o What is the overall level of effort with applying Portal patches?
overall effort to apply the patch is apprx 1/2-1 days for NW7 system. This is exclude the patch files download because it's based on your download speed.
o How are all the changes to SAP objects handle? Do they have to be
manually re-entered?
Depending on your customization. Normally it wont effect if you created the customzation application apart from SAP standard application
o What is the impact of having a single NWDI instance across the
Portal Landscape during the Patch process?
Any change that related to NWDI, you might be need to re-deployed from NWDI itself.
Thanks
Regards,
AZLY

Best Practice for Use of ABAP in Customizing SRM and/or CRM

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Best practice for mouseless ADF applications

I am developing an ADF application where the users do not want to use the mouse.
So I would like to know if there are a best practice for this?
I am already using the accessKey functionality and subforms defaultCommand
But I have had problems setting focus to objects on a page like tables. I would like a button to return the focus to the table after it has made the command like delete.
I have implemented a solution where I have found inspiration several threads and other webpages (see below).
Is this solution okay?
Are there any problems with it?
I would also like to know if there are better pathways to go like
out of the box solutions,
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
in advance thanks
Inspiration webpages
https://blogs.oracle.com/jdevotnharvest/entry/how_to_programmatically_set_focus
http://technology.amis.nl/2008/01/04/adf-11g-rich-faces-focus-on-field-after-button-press-or-ppr-including-javascript-in-ppr-response-and-clientlisteners-client-side-programming-in-adf-faces-rich-client-components-part-2/
how to Commit table by writting Java code in Managed Bean?
Table does not refresh and getting error as UIComponent is Null
A short description of the solution:
(jdeveloper version 11.1.1.2.0)
--- Example where I use onSetFocus in jsff page
<af:commandButton text="#{hrsusuiBundle.FOCUS}" id="cb10"
partialSubmit="true" accessKey="f"
shortDesc="Alt+Shift+F"
actionListener="#{managedBean_clientUtils.onSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
</af:commandButton>
--- Examples where I use doTableActionAndSetFocus in jsff page
--- There have to be a binding in the jsff page to delete, commit and rollback
<af:commandButton text="#{hrsusuiBundle.DELETE}" id="cb4"
accessKey="x"
shortDesc="Alt+Shift+X"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Delete"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.COMMIT}" id="cb5"
accessKey="s" shortDesc="Alt+Shift+S"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Commit"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.ROLLBACK}" id="cb6"
accessKey="z" shortDesc="Alt+Shift+Z"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}"
immediate="true">
<af:resetActionListener/>
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Rollback"/>
</af:commandButton>
--- This is the java class I use
--- It is published in adfc-config.xml as a request scope managedbean
public class ClientUtils {
public ClientUtils() {
public void doTableActionAndSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String actionToDo = (String)rcb.getAttributes().get("actionField");
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(focusOn);
clientId = component.getClientId(JSFUtils.getFacesContext());
if ( "Delete".equals(actionToDo) || "Commit".equals(actionToDo) || "Rollback".equals(actionToDo) ){
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding operationBinding = bindings.getOperationBinding(actionToDo);
Object result = operationBinding.execute();
AdfFacesContext.getCurrentInstance().addPartialTarget(component);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
public static String onSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String clientId = null;
if (focusOn.contains(":")) {
clientId = focusOn;
} else {
clientId = findComponentsClientIdInRoot(focusOn);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
return null;
private static void writeJavaScriptToClient(String script) {
FacesContext fctx = FacesContext.getCurrentInstance();
ExtendedRenderKitService erks = null;
erks = Service.getRenderKitService(fctx, ExtendedRenderKitService.class);
erks.addScript(fctx, script);
public static void makeSetFocusJavaScript(String clientId) {
if (clientId != null) {
StringBuilder script = new StringBuilder();
//use client id to ensure component is found if located in
//naming container
script.append("var textInput = ");
script.append("AdfPage.PAGE.findComponentByAbsoluteId");
script.append ("('"+clientId+"');");
script.append("if(textInput != null){");
script.append("textInput.focus();");
script.append("}");
writeJavaScriptToClient(script.toString());
public static String findComponentsClientIdInRoot(String id) {
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(id);
clientId = component.getClientId(JSFUtils.getFacesContext());
return clientId;
}

Hi,
I am developing an ADF application where the users do not want to use the mouse. So I would like to know if there are a best practice for this?
Well HTML (and this is the user interface you see) follows a tab index navigation that you follow with "tab" and "shift+tab". Anything else is a short cut for which you use mnemonics (as you already do) or shortcuts (explained in http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html). There is a distinction to make between non-web environments (which I think you and your users have abackground in) and client desktop environments. Browsers block some keyboard functionality for their own purpose. So you may have to find a list of keys first that work across browsers. Unlike desktop clients, which allow you to "press a button" without the button to take focus, this cannot be done on the web. So you need to be clever here, avoiding buttons at all.
The following paper is about JavaScript in ADF and explains the basics for what Chris Muir explains in : http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf
It has the outline for how to register short cut keys that perform a specific action (e.g. register ctrl+d to delete the current row you are on, or press F11 to execute a query (similar to Oracle Forms frmres files)). However, be aware that this includes some code you have to write (actually quite some code to be honest).
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
Actually these are implementations as they come with example code for you to use and customize, do they? So what is this question asking for more ? Also note that global buttons don't quite have anything in common with the question you asked. I assume you want to see it as an implementation of the Forms toolbar that operates on the form or table the focus is in. This however does not work for the web as there is nothing that keeps track of which component has a focus and to what iterator (data block) it belongs. This would involve even more coding (though possibly doable)
Frank

HTML and CSS Best Practices for Eloqua?

Hello Topliners Community,
My name is Ben and I am a Web Designer. I am currently looking for any guidance on HTML and CSS best practices when working with Eloqua. I am interested in the best practices for e-mail and landing pages.
Thank you,
Ben

Personally I like to upload my custom created html/css into Eloqua instead of using the WYSIWYG.
But if you must then right clicking on text boxes and click edit source is the way to go.
There was a good discussion on editing your forms with CSS:
Energize Your Eloqua10 Forms with CSS
created by Ryan Wheler on Nov 2, 2012 8:44 AM, last modified by Greg Stotler on Sep 19, 2013 2:00 PM
Version 2
CSS can be used to heavily customize the layout of forms in Eloqua10. In this article we will provide sample cover some common formatting use cases on Eloqua10 Landing Pages. Further details about uses of CSS in Eloqua10 form templates can be found here: EE12 - Do It - Eloqua - Energize E10 Forms
Eloqua10 Forms HTML Structure
Below is an outline of the structure of the HTML generated by Eloqua when a form is added to a landing page. By targeting the HTML classes highlighted below, we can control the layout of any form on your landing page.
For the rest of page: http://topliners.eloqua.com/docs/DOC-3015

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

BI Best Practice for Chemical Industry

Hello,
I would like to know if anyone is aware of SAP BI Best Practice for Chemicals.And if so can anyone please post a link aswell.
Thanks

Hi Naser,
Below information will helps you in detail explanation regarding Chemical industry....
SAP Best Practices packages support best business practices that quickly turn your SAP ERP application into a valuable tool used by the entire business. You can evaluate and implement specific business processes quickly u2013 without extensive Customization of your SAP software. As a result, you realize the benefits with less Effort and at a lower cost than ever before. This helps you improve operational efficiency while providing the flexibility you need to be successful in highly demanding markets. SAP Best Practices packages can benefit companies of all sizes, including global enterprises creating a corporate template for their subsidiaries.
Extending beyond the boundaries of conventional corporate divisions and functions, the SAP Best Practices for Chemicals package is based on SAP ERP; the SAP Environment, Health & Safety (SAP EH&S) application; and the SAP Recipe Management application. The business processes supported by SAP Best Practices for Chemicals encompass a wide range of activities typically found in a chemical industry
Practice:
u2022 Sales and marketing
u2013 Sales order processing
u2013 Presales and contracts
u2013 Sales and distribution (including returns, returnables, and rebates, with quality management)
u2013 Inter- and intracompany processes
u2013 Cross-company sales
u2013 Third-party processing
u2013 Samples processing
u2013 Foreign trade
u2013 Active-ingredient processing
u2013 Totes handling
u2013 Tank-trailer processing
u2013 Vendor-managed inventory
u2013 Consignment processing
u2013 Outbound logistics
u2022 Supply chain planning and execution Supply and demand planning
u2022 Manufacturing planning and execution
u2013 Manufacturing execution (including quality management)
u2013 Subcontracting
u2013 Blending
u2013 Repackaging
u2013 Relabeling
u2013 Samples processing
u2022 Quality management and compliance
u2013 EH&S dangerous goods management
u2013 EH&S product safety
u2013 EH&S business compliance services
u2013 EH&S industrial hygiene and safety
u2013 EH&S waste management
u2022 Research and development Transformation of general recipes
u2022 Supplier collaboration
u2013 Procurement of materials and services (Including quality management)
u2013 Storage tank management
u2013 E-commerce (Chemical Industry Data Exchange)
u2022 Enterprise management and support
u2013 Plant maintenance
u2013 Investment management
u2013 Integration of the SAP NetWeaver Portal component
u2022 Profitability analysis
More Details
This section details the most common business scenarios u2013 those that benefit most from the application of best practices.
Sales and Marketing
SAP Best Practices for Chemicals supports the following sales and marketingu2013related business processes:
Sales order processing u2013 In this scenario, SAP Best Practices for Chemicals supports order entry, delivery, and billing. Chemical industry functions include the following:
u2022 Triggering an available-to-promise (ATP) inventory check on bulk orders after sales order entry and automatically creating a filling order (Note: an ATP check is triggered for packaged material.)
u2022 Selecting batches according to customer requirements:
u2022 Processing internal sales activities that involve different organizational units
Third-party and additional internal processing u2013 In this area, the SAP Best Practices for Chemicals package provides an additional batch production step that can be applied to products previously produced by either continuous or batch processing. The following example is based on further internal processing of plastic granules:
u2022 Purchase order creation, staging, execution, and completion
u2022 In-process and post process control
u2022 Batch assignment from bulk to finished materials
u2022 Repackaging of bulk material
SAP Best Practices for Chemicals features several tools that help you take advantage of chemical industry best practices. For example, it provides a fully documented and reusable prototype that you can turn into a productive solution quickly. It also provides a variety of tools, descriptions of business scenarios, and proven configuration of SAP software based on more than 35 years of working with the
Chemical industry.
SAP Functions in Detail u2013 SAP Best Practices for Chemicals
The package can also be used to support external toll processing such as that required for additional treatment or repackaging.
Tank-trailer processing u2013 In this scenario, SAP Best Practices for Chemicals helps handle the selling of bulk material, liquid or granular. It covers the process that automatically adjusts the differences between the original order quantities and the actual quantities filled in the truck. To determine the quantity actually filled, the tank trailer is weighed before and after loading. The delta weight u2013 or quantity filled u2013 is transmitted to the SAP software via an order confirmation. When the delivery for the sales order is created, the software automatically adjusts the order quantity with the confirmed filling quantity.The customer is invoiced for the precise quantity filled and delivered.
Supply Chain Planning and Execution
SAP Best Practices for Chemicals supports supply chain planning as well as supply chain execution processes:
Supply and demand planning u2013 Via the SAP Best Practices for Chemicals package, SAP enables complete support for commercial and supply-chain processes in the chemical industry, including support for integrated sales and operations planning, planning strategies for bulk material, and a variety of filling processes with corresponding packaging units. The package maps the entire supply chain u2013 from sales planning to material requirements planning to transportation procurement.
Supplier Collaboration
In the procurement arena, best practices are most important in the following
Scenario:
Procurement of materials and services:
In this scenario, SAP Best Practices for Chemicals describes a range of purchasing processes, including the following:
u2022 Selection of delivery schedules by vendor
u2022 Interplant stock transfer orders
u2022 Quality inspections for raw materials, including sampling requests triggered
by goods receipt
Manufacturing Scenarios
SAP Best Practices for Chemicals supports the following sales and
Manufacturingu2013related business processes:
Continuous production u2013 In a continuous production scenario, SAP Best Practices for Chemicals typifies the practice used by basic or commodity chemical producers. For example, in the continuous production of plastic granules, production order processing is based on run-schedule headers. This best-practice package also describes batch and quality management in continuous production. Other processes it supports include handling of byproducts,co-products, and the blending process.
Batch production u2013 For batch production,
SAP Best Practices for Chemicals typifies the best practice used by specialty
chemical producers. The following example demonstrates batch production
of paint, which includes the following business processes:
u2022 Process order creation, execution, and completion
u2022 In-process and post process control
u2022 Paperless manufacturing using XMLbased Process integration sheets
u2022 Alerts and events
u2022 Batch derivation from bulk to finished materials
Enterprise Management and Support
SAP Best Practices for Chemicals also supports a range of scenarios in this
area:
Plant maintenance u2013 SAP Best Practices for Chemicals allows for management
of your technical systems. Once the assets are set up in the system, it focuses on preventive and emergency maintenance. Tools and information support the setup of a production plant with assets and buildings.Revenue and cost controlling u2013 The package supports the functions that help you meet product-costing requirements in the industry. It describes how cost centers can be defined, attached
to activity types, and then linked to logistics. It also supports costing and settlement of production orders for batch and continuous production. And it includes information and tools that help you analyze sales and actual costs in a margin contribution report.
The SAP Best Practices for Chemicals package supports numerous integrated
business processes typical of the chemical industry, including the following:
u2022 Quality management u2013 Supports integration of quality management concepts across the entire supplychain (procurement, production, and sales), including batch recall and complaint handling
u2022 Batch management u2013 Helps generate batches based on deliveries from vendors or because of company production or filling, with information and tools for total management of batch production and associated processes including batch derivation, batch information cockpit, and a batchwhere- used list
u2022 Warehouse management u2013 Enables you to identify locations where materials
or batch lots are stored, recording details such as bin location and other storage information on dangerous goods to help capture all information needed to show compliance with legal requirements
Regards
Sudheer

Best practices for logging results from Looped steps

Hi all
I would like to start a discussion to document best practices for logging results (to reports and databases) from Looped Steps
As an application example - let's say you are developing a test for one of NI's analog input or output cards and need to measure a voltage across multiple inputs or outputs.
One way to do that would be to create a sequence that switches the appropriate signals and performs a "Voltage Measurement" test in a loop.
What are your techniques for keeping track of the individual measurements so that they can be traced to the individual signal paths that are being measured?
I have used a variety of techniques such as
i )creating a custom step type that generates unique identifiers for each iteration of the loop. This required some customization to the results processing . Also the sequence developer had to include code to ensure that a unique identifier was generated for each iteration
ii) Adding an input parameter to the test function/vi, passing loop iteration to it and adding this to Additional results parameters to log.

I have attached a simple example (LV 2012 and TS 2012) that includes steps inside a loop structure as well as a looped test.
If you enable both database and report generation, you will see the following:
1) The numeric limit test in the for loop always generates the same name in the report and database which makes it difficult to determine the result of a particular iteration
2) The Max voltage test report includes the paramater as an additional result but the database does not include any differentiating information
3) The Looped Limit test generates both uniques reports and database entries - you can easily see what the result for each iteration is.
As mentioned, I am seeking to start a discussion for how others handle results for steps inside loops. The only way I have been able to accomplish a result similar to that of the Looped step (unique results and database entry for each iteration of the loop) is to modify the process model results processing.
Attachments:
test.vi ‏27 KB
Sequence File 2.seq ‏9 KB

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Best Practice for Securing Web Services in the BPEL Workflow

What is the best practice for securing web services which are part of a larger service (a business process) and are defined through BPEL?
They are all deployed on the same oracle application server.
Defining agent for each?
Gateway for all?
BPEL security extension?
The top level service that is defined as business process is secure itself through OWSM and username and passwords, but what is the best practice for security establishment for each low level services?
Regards
Farbod

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

Best practice for multi-language content in common areas

I've got a site with some text in header/footer/nav that needs to be translated between an English and Spanish site, which use the same design. My intention was to set up all the text as content to facilitate. However, if I use a standard dialog with the component's path set to a child of the current page node, I would need to re-enter the text on every page. If I use a design dialog, or a standard dialog with the component's path set absolutely, the Engilsh and Spanish sites will share the same text. If I use a standard dialog with the component's path set relatively (eg path="../../jcr:content/myPath"), the pages using the component would all need to be at the same level of the hierarchy.
It appears that the Geometrixx demo doesn't address this situation, and leaves copy in English. Is there a best practice for this scenario?

I'm finding that something to the effect of <cq:include path="<%= strCommonContentPath + "codeEntry" %>" resourceType ...
works fine for most components, but not for parsys, or a component containing a parsys. When I attempt that, I get a JS error that says "design.path is null or not an object". Is there a way around this?

Best Practice for utility in Sol Man 4.0

We have software component ST-ICO of release 150_700 with Patch level 5
We want a Template Selection for Utility industry. I checked in
the service market place and found that 'Baseline Package United
Kingdom V1.50, Template: BP_BLKU150' is available in the above software
component.
But we are not getting any templates other than 'BP_UTUS147 - Best Practices for Water Utility' in the 'SOLAR_PROJECT_ADMIN'
transaction.
Kindly suggest any patch needs to be applied or some configuration need to be done.
Regards
Mani

Hi Mani,
Colud u plz give me the link of "where u find the template BP_BLKU150"?
It will be helpful for me.
Thanks
Senthil

Best Practice for Customization of ESS 50.4

Similar Messages

Maybe you are looking for