Best practice for jndi lookup

I am in the process of cleaning up a rather large codebase and am looking for the best way (or good methodologies I can choose from) for specifying the jndi lookup name. Our current code base has the following methods for specifying the lookup name:
1) hard-coded strings
2) constant defined in the file making lookup
3) constant defined in external interface
4) constant defined in EJB Home interface
My initial thought was to create a single interface and put all the constants within it and have any class that wants to perform a lookup implement that interface. But before I went and did that I wanted to see if there were any other methods out there.
I searched the forums (EJB/JNDI) but could not find anything that specified any method that was preferred.
TIA

I am in the process of cleaning up a rather large
codebase and am looking for the best way (or good
methodologies I can choose from) for specifying the
jndi lookup name. Our current code base has the
following methods for specifying the lookup name:
1) hard-coded strings
2) constant defined in the file making lookup
3) constant defined in external interface
4) constant defined in EJB Home interface
constant defined in external interface
My initial thought was to create a single interface
and put all the constants within it and have any
class that wants to perform a lookup implement that
interface.
sounds great !

Similar Messages

Best practice for customizing EJB property after deployment

Hi Gurus,
What is the best practice for customizing EJB property after deployment in NW7.1? I have a stateless session bean and it needs to get some environment information before acting. While the information can only be known at runtime. What should I do to achieve it? I thought I can bind the property with a JNDI context but I did not find out where to declare and change the context value. Please advise. Thanks.
B.R.

Hi.
I have a similar problem. But I still can not edit the properties of the ejb-jar.xml.
I tried to stop the web service, but the properties still remain unmodifiable.
Could you advise me how to change them?
We have installed SAP Server 7.0.2

IronPort ESA best practice for DNS servers?

Hello!
Is there a best practice for what servers should be used for the Cisco IronPort DNS servers?
Currently when I check our configuration, we have set it to "Use these DNS servers" and the first two are our domain controllers and last two are Google DNS.
Is there a best practice way of doing this? I'm thinking of selecting the "Use the Internet's Root DNS Servers" option as I can't really see an advantage of using internal DC's.
Thoughts?

Best practice is to use Internet Root DNS Servers and define specific dns servers for any domain that you need to give different answers for. Since internal mail delivery is controlled by smtproutes using internal dns servers is normally not required.
If you must use internal dns servers I recommend servers dedicated to your Ironports and not just using servers that handle enterprise lookups as well. Ironports can place a very high load on dns servers because every outside connection results in multiple dns lookups. (forward, reverse, sbrs)
If you don't have enough dns horsepower you are susceptible to a DOS attack either through accident or design. If the Ironports overload your internal dns servers it can impact your entire enterprise.

Best Practices for Accessing the Configuration data Modelled as XML File in

Hi,
I refer the couple of blof posts/Forum threads on How to model and access the Configuration data as XML inside OSB.
One of the easiest and way is to
Re: OSB: What is best practice for reading configuration information
Another could be
Uploading XML data as .xq file (Creating .xq file copy paste all the Configuration as XML )
I need expert answers for following.
1] I have .xsd file which is representing the Configuration data. Structure of XSD is
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue</Config>
<FrameworkConfig>
2] As my project will move from one env to another the property-value will change according to the Environment...
For Dev:
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Dev</Config>
<FrameworkConfig>
For Stage :
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Stage</Config>
<FrameworkConfig>
3] Let say I create the following Folder structure to store the Configuration file specific for dev/stage/prod instance
OSB Project Folder
|
|---Dev
|
|--Dev_Config_file.xml
|
|---Stage
|
|--Stahe_Config_file.xml
|
|---Prod
|
|-Prod_Config_file.xml
4] I need a way to load these property file as xml element/variable inside OSb message flow.?? I can't use XPath function fn:doc("URL") coz I don't know exact path of XMl on deployed server.
5] Also I need to lookup/model the value which will specify the current server type(Dev/Stage/prod) on which OSB MF is running. Let say any construct which will act as a Global configuration and can be acccessible inside the OSb message flow. If I get the vaalue for the Global variable as Dev means I will load the xml config file under the Dev Directory @runtime containing key value pair for Dev environment.
6] This Re: OSB: What is best practice for reading configuration information
suggest the designing of the web application which will serve the xml file over the http protocol and getting the contents into variable (which in turn can be used in OSB message flow). Can we address this problem without creating the extra Project and adding the Dependencies? I read configuration file approach too..but the sample configuration file doesn't show entry of .xml file as resources
Hope I am clear...I really appreciate your comments and suggestion..
Sushil
Edited by: Sushil Deshpande on Jan 24, 2011 10:56 AM

If you can enforce some sort of naming convention for the transport endpoint for this proxy service across the environments, where the environment name is part of the endpoint you may able to retrieve it from $inbound in the message pipeline.
eg. http://osb_host/service/prod/service1 ==> Prod and http://osb_host/service/prod/service2 ==> stage , then i think $inbound/ctx:transport/ctx:uri can give you /service/prod/service1 or /service/stage/service1 and applying appropriate xpath functions you will be able to extract the environment name.
Chk this link for details on $inbound/ctx:transport : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1080822

Best practices for 2 x DNS servers with 2 x sites

I am curious if someone can help me with best practices for my DNS servers. Let me give my network layout first.
I have 1 site with 2 x Windows 2012 Servers (1 GUI - 10.0.0.7, the other CORE - 10.0.0.8) the 2nd site connected via VPN has 2 x Windows 2012R2 Servers (1 GUI - 10.2.0.7, the other CORE - 10.2.0.8) All 4 servers are promoted to DC's and have DNS services
running.
Here goes my questions:
Site #1
DC-01 - NIC IP address for DNS server #1 set to 10.0.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.0.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
Site #2
DC-01 - NIC IP address for DNS server #1 set to 10.2.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.2.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local
> properties > Name Servers should I have all of my other DNS servers, or should I have my WAN DNS servers? In a single server scenario I always put my WAN DNS server but a bit unsure in this scenario.
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > General > Type should all servers be set to
Active Directory - Integrated > Primary Zone? Should any of these be set to
Secondary Zone?
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > Zone Transfers should I allow zone transfers?
Would the following questions be identical to the Forward Lookup Zone mydomain.local as well?

I am curious if someone can help me with best practices for my DNS servers. Let me give my network layout first.
I have 1 site with 2 x Windows 2012 Servers (1 GUI - 10.0.0.7, the other CORE - 10.0.0.8) the 2nd site connected via VPN has 2 x Windows 2012R2 Servers (1 GUI - 10.2.0.7, the other CORE - 10.2.0.8) All 4 servers are promoted to DC's and have DNS services
running.
Here goes my questions:
Site #1
DC-01 - NIC IP address for DNS server #1 set to 10.0.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.0.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
Site #2
DC-01 - NIC IP address for DNS server #1 set to 10.2.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.2.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local
> properties > Name Servers should I have all of my other DNS servers, or should I have my WAN DNS servers? In a single server scenario I always put my WAN DNS server but a bit unsure in this scenario.
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > General > Type should all servers be set to
Active Directory - Integrated > Primary Zone? Should any of these be set to
Secondary Zone?
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > Zone Transfers should I allow zone transfers?
Would the following questions be identical to the Forward Lookup Zone mydomain.local as well?
Site1
DC1: Primary 10.0.0.7. Secondary 10.0.0.8. Tertiary 127.0.0.1
DC2: Primary 10.0.0.8. Secondary 10.0.0.7. Tertiary 127.0.0.1
Site2
DC1: Primary 10.2.0.7. Secondary 10.2.0.8. Tertiary 127.0.0.1
DC2: Primary 10.2.0.8. Secondary 10.2.0.7. Tertiary 127.0.0.1
The DC's should automatically register in msdcs. Do not register external DNS servers in msdcs or it will lead to issues. Yes, I recommend all zones to be set to AD-integrated. No need to allow zone transfers as AD replication will take care
of this for you. Same for mydomain.local.
Hope this helps.

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Best Practice for Securing Web Services in the BPEL Workflow

What is the best practice for securing web services which are part of a larger service (a business process) and are defined through BPEL?
They are all deployed on the same oracle application server.
Defining agent for each?
Gateway for all?
BPEL security extension?
The top level service that is defined as business process is secure itself through OWSM and username and passwords, but what is the best practice for security establishment for each low level services?
Regards
Farbod

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

Best practice for multi-language content in common areas

I've got a site with some text in header/footer/nav that needs to be translated between an English and Spanish site, which use the same design. My intention was to set up all the text as content to facilitate. However, if I use a standard dialog with the component's path set to a child of the current page node, I would need to re-enter the text on every page. If I use a design dialog, or a standard dialog with the component's path set absolutely, the Engilsh and Spanish sites will share the same text. If I use a standard dialog with the component's path set relatively (eg path="../../jcr:content/myPath"), the pages using the component would all need to be at the same level of the hierarchy.
It appears that the Geometrixx demo doesn't address this situation, and leaves copy in English. Is there a best practice for this scenario?

I'm finding that something to the effect of <cq:include path="<%= strCommonContentPath + "codeEntry" %>" resourceType ...
works fine for most components, but not for parsys, or a component containing a parsys. When I attempt that, I get a JS error that says "design.path is null or not an object". Is there a way around this?

Best Practice for utility in Sol Man 4.0

We have software component ST-ICO of release 150_700 with Patch level 5
We want a Template Selection for Utility industry. I checked in
the service market place and found that 'Baseline Package United
Kingdom V1.50, Template: BP_BLKU150' is available in the above software
component.
But we are not getting any templates other than 'BP_UTUS147 - Best Practices for Water Utility' in the 'SOLAR_PROJECT_ADMIN'
transaction.
Kindly suggest any patch needs to be applied or some configuration need to be done.
Regards
Mani

Hi Mani,
Colud u plz give me the link of "where u find the template BP_BLKU150"?
It will be helpful for me.
Thanks
Senthil

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Best practices for ARM - please help!!!

Hi all,
Can you please help with any pointers / links to documents describing best practices for "who should be creating" the GRC request in below workflow of ARM in GRC 10.0??
Create GRC request -> role approver -> risk manager -> security team
options are : end user / Manager / Functional super users / security team.
End user and manager not possible- we can not train so many people. Functional team is refusing since its a lot of work. Please help me with pointers to any best practices documents.
Thanks!!!!

In this case, I recommend proposing that the department managers create GRC Access Requests. In order for the managers to comprehend the new process, you should create a separate "Role Catalog" that describes what abilities each role enables. This Role Catalog needs to be taught to the department Managers, and they need to fully understand what tcodes and abilities are inside of each role. From your workflow design, it looks like Role Owners should be brought into these workshops.
You might consider a Role Catalog that the manager could filter on and make selections from. For example, an AP manager could select "Accounts Payable" roles, and then choose from a smaller list of AP-related roles. You could map business functions or tasks to specific technical roles. The design flaw here, of course, is the way your technical roles have been designed.
The point being, GRC AC 10 is not business-user friendly, so using an intuitive "Role Catalog" really helps the managers understand which technical roles they should be selecting in GRC ARs. They can use this catalog to spit out a list of technical role names that they can then search for within the GRC Access Request.
At all costs, avoid having end-users create ARs. They usually select the wrong access, and the process then becomes very long and drawn out because the role owners or security stages need to mix and match the access after the fact. You should choose a Requestor who has the highest chance of requesting the correct access. This is usually the user's Manager, but you need to propose this solution in a way that won't scare off the manager - at the end of the day, they do NOT want to take on more work.
If you are using SAP HR, then you can attempt HR Triggers for New User Access Requests, which automatically fill out and submit the GRC AR upon a specific HR action (New Hire, or Termination). I do not recommend going down this path, however. It is very confusing, time consuming, and difficult to integrate properly.
Good luck!
-Ken

Best Practices For Household IOS's/Apple IDs

Greetings:
I've been searching support for best practices for sharing primarily apps, music and video among multple iOS's/Apple IDs. If there is a specific article please point me to it.
Here is my situation:
We currently have 3 iPads (2-kids, 1-dad) in the household and one iTunes account on a win computer. I previously had all iPads on single Apple ID/credit card and controlled the kids' downloads thru the Apple ID password that I kept secret. As the kids have grown older, I found myself constantly entering my password as the kids increased there interest in music/apps/video. I like this approach because all content was shared...I dislike because I was constantly asked to input password for all downloads.
So, I recently set up an individual account for them with the allowance feature at iTunes that allows them to download content on their own (I set restrictions on their iPads). Now I have 3 Apple IDs under one household.
My questions:
With the 3 Apple IDs, what is the best way to share apps,music, videos among myself and the kids? Is it multiple accounts on the computer and some sort of sharing?
Thanks in advance...

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

Basic Strategy / Best Practices for System Monitoring with Solution Manager

I am very new to SAP and the Basis group at my company. I will be working on a project to identify the best practices of System and Service level monitoring using Solution Manager. I have read a good amount about SAP Solution Manager and the concept of monitoring but need to begin mapping out a monitoring strategy.
We currently utilize the RZ20 transaction and basic CCMS monitors such as watching for update errors, availability, short dumps, etc.. What else should be monitored in order to proactively find possible issues. Are there any best practices you all have found when implimenting Monitoring for new solutions added to the SAP landscape.... what are common things we would want to monitor over say ERP, CRM, SRM, etc?
Thanks in advance for any comments or suggestions!

Hi Mike,
Did you try the following link ?
If not, it may be useful to some extent:
http://service.sap.com/bestpractices
---> Cross-Industry Packages ---> Best Practices for Solution Management
You have quite a few documents there - those on BPM may also cover Solution Monitoring aspects.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jul 7, 2008 7:02 PM

Best practice for integrating a 3 point metro-e in to our network.

Hello,
We have just started to integrate a new 3 point metro-e wan connection to our main school office. We are moving from point to point T-1?s to 10 MB metro-e. At the main office we have a 50 MB going out to 3 other sites at 10 MB each. For two of the remote sites we have purchase new routers ? which should be straight up configurations. We are having an issue connecting the main office with the 3rd site.
At the main office we have a Catalyst 4006 and at the 3rd site we are trying to connect to a catalyst 4503.
I have attached configurations from both the main office and 3rd remote site as well as a basic diagram of how everything physically connects. These configurations are not working ? we feel that it is a gateway type problem ? but have reached no great solutions. We have tried posting to a different forum ? but so far unable to find the a solution that helps.
The problem I am having is on the remote side. I can reach the remote catalyst from the main site, but I cannot reach the devices on the other side of the remote catalyst however the remote catalyst can see devices on it's side as well as devices at the main site.
We have also tried trunking the ports on both sides and using encapsulation dot10q ? but when we do this the 3rd site is able to pick up a DHCP address from the main office ? and we do not feel that is correct. But it works ? is this not causing a large broad cast domain?
If you have any questions or need further configuration data please let me know.
The previous connection was a T1 connection through a 2620 but this is not compatible with metro-e so we are trying to connect directly through the catalysts.
The other two connection points will be connecting through cisco routers that are compatible with metro-e so i don't think I'll have problems with those sites.
Any and all help is greatly welcome ? as this is our 1st metro e project and want to make sure we are following best practices for this type of integration.
Thank you in advance for your help.
Jeff

Jeff, form your config it seems you main site and remote site are not adjacent in eigrp.
Try adding a network statement for the 171.0 link and form a neighbourship between main and remote site for the L3 routing to work.
Upon this you should be able to reach the remote site hosts.
HTH-Cheers,
Swaroop

Best practice for jndi lookup

Similar Messages

Maybe you are looking for