Best way forward?

I'm currently running a (very old I believe) version of Oracle Application Server that has PHP version 4.3.9 built in. I'm certain that this was a version that was compiled by Oracle and then dumped on a CD for installation.
I'm trying to extend it, but reading the forums it would appear that the version I'm using isn't extendible (see here for related post: Extending Oracle AS suppled PHP
Can anybody confirm this, and also advise if Zend Core for Oracle is the best way forward from here. I'm running SunOS (Solaris 10) and Oracle 10g.
Regards
Rich

Zend Core is a good way forward. Alternatively you may want to compile PHP yourself.
-- cj

Similar Messages

Everytime i try to open creative cloud installer i get a error code 22 i have tried turning off my firewall and no success. what is the best way forward?

everytime i try to open creative cloud installer i get a error code 22 i have tried turning off my firewall and no success. what is the best way forward?

is that the case-sensitive drive error? Error "Case-sensitive drives not supported" or similar install error | Mac OS

What is the best way forward to improve my computers performance after installing lion

Since Lion runs worse than windows should one use onyx to improve performance or revert to snow leopard? If onyx is a safe and good solution, are there any remaining dangers of running the latest onyx program? What settings would you recommend in Onyx?

1. Make sure you've updated all your programs.
2. Are programs slow if you only have one running at a time?
(and/or after running the "purge" command)
Your signature says you have 8 GB or RAM, if so, you can try disabling paging to see if that helps:
(the commands in blue should fit on one line, not two)
to disable:
sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.dynamic_pager.plist
reboot
to re-enable:
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.dynamic_pager.plist

EXCEL - SAP integration ... which way forward?

Hi folks,
A customer (having a SAP 4.6D system) would like to have an EXCEL sheet being populated with SAP data with some additional formatting (headers, subheading, totals, colouring cells based on certain values; etc ...) within the EXCEL sheet ...
Out of my head I could think of some possibities here:
- ALV view of table with download (but no extra formatting options here ... )
- ABAP OLE commands (not sure this is still being used)
- EXCEL integration via BDS ( I remember that you can have a both way integration here but how far does it go?)
- RFC communication to for example .NET RFC server via .NET connector ..
Anyone having any experience in this? What are the pro's and cons of any of the possibilies? Anyone any suggestion on what is the best way forward?
My customer is looking for a 'cheap' fast solution and is not willing to spend more then 2-3 days on it ...
Thx,
Steven

Hello Steven
I prefere ALV Grid in combination with ALV templates stored in SAP (avaliable from 46c).
I don't know all the methods from the other replys, but my experience is that OLE and use of excel macros with VBA script is a bad idea. Some years ago i made an interface like that based on (as far as i remember) excel 95 and R/3 31i. After upgrade to R/3 46c I had to change the ABAP program to make it work again. Two month later we changed to office 2000 and after that the macros didn't work anymore - I never fixed it - I changed to ALV grid.
With the combination of ALV grid and excel templates you solve the problems with the tools that is best. You use ABAP to extract the data and you use excel for the formatting.
I a privieus posting I listede som hints about this technique. I don't know how to link to an other posting, so I just cut/paste:
1) An ABAP program extracts data from the database and presents the data with Excel Inplace.
2) Instead of the SAP standard templates SAP_OM.XLS and SAP_MM.XLS the program uses a customised excel template created by the "business people" themselves. (Now they can't blame you for the layout).
Where to find more info:
Oss note 358644 and 548409
You will have to build your own templates by creating modified copies of the SAP standard templates SAP_OM.XLS and SAP_MM.XLS. If you can find these see note 316728 to copy them from client 000.
You will have to work with transaction OAOR to administrate the templates and program BC_BDS_UPLOAD to upload new templates.
You will also find information in the ALV grid documentation on help.sap.com.
Best regards
Thomas Madsen Nielsen

Best way to handle large list of results in recordsets?

Hello all.
I'm using Dreamweaver CS3, MySQL and ASP/VBScript.
My database of users behind my website is now approaching 25,000.
I often have to "move" items in the database from one user record to another.
Up and until now, I've done this simply by way of a drop down menu/list that is populated with the user ID# and Name of each and every user in the database. This previously allowed me to simply select the ID of the Customer I wanted to "Move" the record to.
The problem, is that the system is of course now trying to load a list of almost 25,000 user ID's each time I view the relevant site page, which is now taking so long to load it's uncomfortable.
I've seen other sites that allow you to start typing something in to a text box and it starts filtering the results that match as you type, showing a list below.
I assume (but am happy to be advised otherwise) that this is likely to be my best way forward, but I haven't the first clue how to do it.
Can anyone advise?
Regards
David.

You're looking for a 'type ahead' control. Try searching the web, although you may have trouble finding example code for classic asp. I did find some asp.net solutions out there.

Best Way To Sync E-mail On Pcs and IPhone?

I have a vista pc, a XP pc and an iphone. I would like e-mail synced on the pcs and accessible by the iphone. If I use my iphone to reply to e-mail or to write new e-mail then I would like that reflected on my pcs.
I don't want all of my e-mail held on my iphone due to concerns over identify theft if the phone is stolen or lost. Therefore, having it fully synched with the pcs doesn't appeal.
I'm seriously thinking about mobileme, more for the photo and document storage together with calendar synching.
I have a pop account, but would consider another account such as gmail or mobileme account. The latter possibly not ideal due to being tied in to Apple and their charges.
I'd be grateful for advice on the best way forward.

I'm aware that imap syncs e-mail but I'm hoping that I can use an impap account but for the iphone only download new e-mail. Having thousands of e-mails on my iphone is a waste of memory and a security concern.
This is not possible. The iPhone's mail client is no different from an email client used on a computer for accessing an IMAP account in this regard.
And you won't have thousands of emails on your iPhone. The iPhone's mail client includes a setting to show XX most recent messages for each mailbox with 200 being the max. If a mailbox has more than 200 messages available, there is a Load More Messages selection at the bottom of the mailbox. And storage used is minimal with an email account unless you open and view each message in a mailbox. When a new message is received with the iPhone's mail client, the message header and the number of message preview lines you have selected are downloaded only. The entire message body is not downloaded until the message is selected to be opened. And if you are connected to the cellular network for internet access, attachments are not downloaded until the attachment is selected in the message body - unless an attachment is under a smaller designated size.
And with an IMAP account that is also accessed with an email client on your computer, you can transfer server stored messages to a mailbox stored locally on your computer's hard drive which removes the messages from the server - especially for older messages received that have not be transferred to additional server stored mailboxes by category, etc.
The iPhone's mail client is really designed to be an extension of the email client used on your computer for accessing an account and IMO, an IMAP account is best for this purpose which is designed to be accessed with multiple email clients. You can create additional server stored mailboxes to sort received and sent messages by category, and you have control over the number of messages available in each server stored mailbox with the email client used on your computer for accessing the account.

Moving InDesign packages to client via web - best way?

I have some InDesign packages that I need to pass to my client on a regular basis. They're pretty big at about 5gb each. My client will also be passing me files before I work on them.
I've Googled 'move big files mac' and I get a lot of options.
http://www.sendbigfiles.com/
http://www.yousendit.com/
http://www.uploadbigfiles.net/
http://www.filedropper.com/
It seems there are a few ways of doing this. Some are just dropping one file (in this case I think I'd have to ZIP), getting a link, emailing the link to the client, and them downloading the ZIP from the link.
Others are more structured and would allow me to have different folders for different clients. That sounds like an FTP site and use something like Transmit. I've got the demo of Transmit, but wouldn't know how to setup an FTP site. I've used FTP sites with employers before.
Does anyone have any recommendations on the best way forward? Free and fast and easy would put a smile on my face, too.
Many thanks.

What sort of Internet connection are you planning to send these files over? If you have a leased line or something snazzy like SDSL, you can upload 5GB as fast as you could download it, but ADSL and cable are highly asymmetrical -- roughly one tenth the speed going upstream as down, so if you have 8Mbits per sec download, you'd be doing very well to get 1Mb per sec uploads. Quick calculation suggests it would take you over 11 hours to send each file. (Don't forget the speed is bits per sec and the file size is in bytes, if you're checking the arithmetic.) That's making some very optimistic assumptions. I'd be inclined to put a couple of DVDs in the post instead.
But if you do want to use the Internet and have a fast upstream connection, first see if you can persuade the client to set up the FTP server. Publishers do that routinely, for example. As other people have said, setting up your own Mac as an FTP server is trivial: System Preferences>Sharing, turn on file sharing, click options, choose FTP and set up a guest account. I can't advise it though, because FTP is inherently insecure. Setting up an SFTP server on the other hand is no joke unless you have done a bit of sys admin and understand about SSL and all that.
You should probably use one of the services people have mentioned instead, therefore. Perhaps this MobileMe thing of Apple's could handle it? I've never tried the service, but iDisk is thoroughly integrated with the system, so it would probably be the easiest to use.

What's the best way to transfer (not forward) a call from one iPhone to another?

What's the best way to transfer (not forward) a call from one iPhone to another? Is there an app available that does this? I'm asking about receiving a call, then transferring that caller to another iPhone on a separate number and then disconnecting while those two users are joined up in a conversation.

Ask your carrier. This would be a feature provided by them.

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

The best way to get help with logic

I was posting in a thread on support for logic which appears to have been deleted. anyway, what I was going to say I think is useful info for people, so I'm going to post it anyway. to the mods - it doesn't contain any speculation about policies or anything like that. just an explanation of my views on the best way to deal with issues people have with logic, which I think is a valuable contribution to this forum.
I think there's a need for perspective. when you buy an apple product you get 90 days of free phone support to get everything working nice and neat. you can call them whenever, and you could actually keep them on the phone all day if you wanted, making them explain to you how to copy a file, install microsoft office, or any number of little questions no matter how simple - what is that red button thingy in my window for?.. on top of that, you've got a 14 day dead on arrival period (or 10 days I can't remember) in which if your machine has any kind of hardware fault whatsoever it's exchanged for a totally new one, no questions asked. a lot of people complain that applecare is overpriced.. and if you think of it just as an extended warranty, then it is a little pricey. but if you are someone that could use a lot of phone support, then it's actually potentially a total bargain. the fact that 2 or more years after you bought a computer, you could still be calling them every single day, asking for any kind of advice on how to use anything on the machine, is quite something. many people on this forum have had problems when they made the mistake of upgrading to 10.4.9 without first creating a system clone or checking first with their 3rd party plug in vendors to make sure it was ok. so, with apple care, you could call them and keep a technician on the phone _all day_ talking you through step-by-step how to back up all of your user data, how to go through and preserve your preferences and any other specific settings you might not want to lose, and then how to rollback to an earlier OS version.. they'll hold your hand through the whole thing if you need them to.
as for applecare support for pro apps like logic, I'd be the first person to agree that it's not great for anyone except beginners and first time users. if you look at what it takes to get even the highest level of logic certification, it's all pretty basic stuff. and logic doesn't exist in a vacuum, there is an entire universe of 3rd party software and hardware, as well as studio culture and advanced user techniques that are going to be totally invisible to some poor phone support guy at apple that did a logic 101. but it's not hard to see that apple are trying to promote a different kind of support culture, it's up to you to decide whether you want to buy into it or not.
the idea is that they are able to provide basic setup support for new users, including troubleshooting. because it's a simpler level of support, at least they can do this well. so there's no reason why any new user with say a new imac and logic can't get up and running with the 90 days of phone support they get for free.
but the thing is, for extremely high end pro users it's a different matter altogether. pro use of logic within the context of say, a studio or a film composition scenario is a very different world. it's almost a nonsense to imagine that apple could even hire people capable of giving useful support for this end of the spectrum, over the phone. there are so many variables, and so many things that require a very experienced studio person or in-work composer to even begin to understand the setup, let alone troubleshoot it. and it's a constantly evolving world, you actually have to be working in it and aware of developments on 3rd party fronts as well as changes in hardware.. not to mention even changes in the culture of studio production and the changed expectations that come from that. there's no way some poor little guy sitting at a help desk at apple can even hope to be privy to that kind of knowledge. it's already good enough that they don't outsource their support staff to india, let alone go out to studios and hire the very people with the skills that should be staying in the studio! not answering phones for apple.
so, given this reality.. companies have two choices. they can either offer an email based support ticket system, which others do. but in my opinion.. this can just be frustrating and only a half-solution. sure you 'feel' like you are getting a response from the people that make the software and therefore must know it.. but it's not really the case due to what I said above. DAWs don't exist in a vacuum, and so much of what you need to understand to help people requires an intimate knowledge of the music industry in which they are working. you still won't get that from steinberg, even if they sort of answer your emails. the other problem is that this kind of system can mean sporadic answers, a lot of tail-chasing, and quite often you won't get an answer that helps you in the end anyway.
the other model is to foster a strong user support culture. some people react in the wrong way to this idea.. they just think it's a big brush off from the manufacturer, saying we don't care, go sort it out yourselves.. but this isn't true. apple has a classification for pro resellers called 'apple solutions expert - audio'. what this means is that these dealers are recognised as audio specialists and they can receive extra support and training from apple for this. but more importantly than this.. most of them are music stores, or pro gear dealerships that are also mac and logic dealers. they already employ people that have worked or do work in the music industry, and are constantly on top of all of this stuff. apple encourages these dealers to run workshops, and to provide expert sales advice in the very niche area that logic is in, which they can do far better than some generic apple store ever could. but most importantly, they are encouraged to offer their own expert after-sales support and whatever other value-adding expertise they can, to get sales. because margins in computer gear are so tight nowadays, discounting is not really a viable option for these dealers to guarantee getting musicians to buy computers and logic setups from them. the only companies that can entice people with a lower price a big online wholesalers or big chain stores. so the best idea for these niche expert stores to get sales is to offer you their own experts to help with configuration, ongoing support and to generally make it a better idea that you bought your system from them rather than from some anonymous online store. I can see the wisdom of this.. it puts the support back out there on the ground where it's needed, and also where it can work best. apple could never hope to offer the same level of expertise in helping a film composer work through some issues with a specific interface or some highly specific issue they have with getting a task done. no big software manufacturer could do this anywhere near as well as people out there that have worked in studios or currently do work in studios. so in my opinion it's a far better model to foster this kind of support culture, along with training courses, books and training video support. also user forums like this one are possibly one of the most valuable ports of call anyone could ask for. apple couldn't replicate this with their own staff, even if they tried. and even if they made a system where some of the people close to logic development were able to answer emails, it would still be nowhere near as useful, as rapid or as capable of being up to speed with logic use out in the real world with 3rd pary gear, as any of these other methods are.
the only thing I think they could do better would be to publish a list of known bugs which are officially recognised. this would help everyone and put an end to a lot of wasted time and speculation on if something is a bug totally to do with logic, or if it's a specific issue raised by a particular configuration.
but really, in my view, a 3rd party support and training culture through a combination of specialist dealers, consultants that literally run a business setting up computers for pro-users and helping them keep it all working, online user-to-user forums and published materials really are the way forward.

In all honesty this is currently the 3rd "logicboard" (motherboard)
in my powerbook due to a design flaw regarding the 2nd memory slot....
Yep. Mine failed five weeks after I bought it. However, I bought it for work and couldn't afford being without it for four weeks while they fixed it, so I had to live with it. My serial number did not entitle me to a replacement either, post Applecare.
My firewire ports have burnt out from a third-party defective device (no hot-plugging involved)
My screen is blotchy (my PW serial number did not entitle me to a replacement).
My battery serial number did not entitle me to a replacement, and is not that good these days.
My guaranteed Powerbook-compatible RAM is actually not, causing RAM related problems, most notably these days meaning that as soon as I switch to battery power, the laptop crashes, so I can only use mains power. The company I bought it from stopped taking my calls and wouldn't replace it after they replaced it once, so I'm stuck with it. And of course, only one ram slot is working, so I can't even use my original stick in the first slot, which would shift the dodgy stuff away from the lower system area.
My power supply failed at the weak spot and caught fire. I managed to break apart the power supply and recable it so I didn't have to buy a new power supply, although the connection at the laptop end is loose (all the more fun that as soon as power is lost, the laptop crashes - see above). The power supply is held together with gaffa tape. Silver gaffer tape though, so it's still kind of 'Appley"...
My internal hard drive is dying - four or five times now it clicks and won't power up, causing the laptop to die.
One foot has fallen off (but glued back on).
The lid is warped.
The hinge is loosish.
The S-Video adaptor cable is intermittent.
But aside from all that, I have looked after it well, and I love it to death. Just as well, because it doesn't look like it will be that long...
But it still "just works". Apart from the battery power obviously. And the ram slot. And the ram. And the screen. And the hard drive. And the firewire ports. And the feet.
But everything apart from the main board, the screen, the case, the hard drive and the power supply works fine. So thats... er..
Hmm.

What is the best way to make a HDMI connection?

I have a 13" Macbook Pro, bought in late 2011, therefore I have the Thunderbolt port. I do not think it has a mini DVI port. Therefore my question is what is the best way to connect this great Mac to a HDTV using an HDMI port on the TV?

To connect MBP to HDMI monitor or TV via Thunderbolt port, use mini DisplayPort-to-HDMI adapter and HDMI cable. Thunderbolt port is mini-DisplayPort compatible. If you get the adaptor that supports video and audio signal, both will be forwarded to your monitor or TV. Search the Apple store.

What is the best way to deploy an application ??

Hi,
Please advise me how to automate in a best way to Deploy 10 different applications(.ear/.war)
to 10 different Clusters(containing 40 Managed servers) in wls6.1......and that
too in a Production environment.
I know that we can use weblogic Console to deploy an application BUT if i have
2 unix boxes and each box contains 4-4 clusters(each containing 16-20 managed
servers) .....then i have to open up 2 Admin server consoles to deploy each of
the respective applications and that too deploying these application to 8 clusters.....OR
i can use deploy commad to do the same.
AND if i have like 100 clusters .....then i would have to "deploy" 100 times ......
is there any way that we can BEST AUTOMATE this process.
Thanks a lot.
-sangita

Thanks Tommy. but i would like to know a very important point here: this is using
the weblogic.utility that you just talkd about.
Suppose iam having an ADMIN server that has say 10 clusters and 50 managed servers
underneath to take care.
1 cluster each = 5 managed server
now iam deploying a simple .war file to say a single managed server, i have found
out that it takes a looot of time to get the application deployed.
what do you say about this situation ?
what is the best approach ??????
-sangita
"Tomy Mathew" <[email protected]> wrote:
>
>
To deploy the application from the command prompt in WebLogic 6.1 you
use the
following command
$JAVA_HOME/bin/java -cp $WL_HOME/weblogic.jar weblogic.deploy -port $WEBLOGIC_PORT
-host $WL_HOST_IP $WEBLOGIC_CMD $WEBLOGIC_PWD -component $WL_Server_NAME:$WL_Server_NAME
$WL_APPLICATION_NAME YourApplication.war
$WEBLOGIC_CMD sould be DEPLOY for the first time deployment and UPDATE
for redeployment
For deploying in a cluster you better create a shell script which call
the above
command with different cluster ip address as a parameter.
Tomy
"sangita" <[email protected]> wrote:
Thanks Rob for your expertise advise. I would check to see wls8.1's
ANT tasks.....for
wls6.1, i would guess shell scripts to be a better option for us.
thanks again.
Rob Woollen <[email protected]> wrote:
If you're using 8.1, then it's pretty nice to use ant for
configuration/deployment/starting and stopping servers etc. There's
a
wlconfig task to do configuration, wldeploy to deploy applications,
wlserver to start/stop servers.
For 6.1, it's probably not a huge win to use ant. It's up to you.
If
you're more comfortable using shell scripts, that's certainly a
reasonable route.
-- Rob
sangita wrote:
Thanks Rob.
But all the stuff that ANT can do for me FOR DEPLOYMENT (ONLY) .....ican do it
from a simple shell script too.
And i understand of ANT's cross-platform environment and usage of
JAVA
.....but
can i use ANT to do something like CONFIGURING my wls6.1 managed
servers/clusters/creating
managed servers/db connection pools ......and all the other configurationthat
i do from wls console(or manually) ....????
and if yes, do you know of any examples, suggestions, ideas ?????
basically, if i need to sell(?) ANT to my juniors ......what are
the
basic reasoning
i can put forward....keeping in mind that these guys use wls6.1 &
wls8.1......and
these guys do CONFIGURATION and DEPLOYMENT only.
sorry for asking, may be these silly questions.
thanks, sangita
Rob Woollen <[email protected]> wrote:
sangita wrote:
Thanks Rob.
Rob, do you still consider or suggest using ANT for deploying say
20
applications
on a 10 clustered environment.Yes
do you see any advantages using [ANT + weblogic.deploy]..... over
simply
using
weblogic.deploy utility ???Yes. ANT essentially gives you a cross-platform environment that
allows
extensibility through java. It's very powerful.
-- Rob
-sangita
Rob Woollen <[email protected]> wrote:
sangita wrote:
Rob,
I have found the answer for my question #1 ...this is the URL:
http://edocs.bea.com/wls/docs81/admin_ref/ant_tasks.html
iam still hoping to hear back from you for #2, #3
thanks a ton.
"sangita" <[email protected]> wrote:
Thanks Rob.
quick question:
1) do you know of any example which illustrates the use of ANT
wrapper....or
please
direct me to a URL where i can find some documentation about
it.
2) does this ANT wrapper has any advantages over using weblogic.Deployer
utility
??If you're doing deployment via ant, then it's a bit more convenientto
use <wldeploy> rather than invoking a raw <java> process, but
fundamentally it's just a wrapper around weblogic.Deployer
3) i would certainly check to see weblogic.deploy for wls6.1
....can
i use ANT
for deployment purpose in wls6.1 ?You'll just need to wrap it in a <java> task
See:
http://ant.apache.org/manual/CoreTasks/java.html
-- Rob
Rob Woollen <[email protected]> wrote:
If you were using WLS 7.0 or later, you could use weblogic.Deployer.
If
you were using 8.1, you could use wldeploy which is an ant task
wrapper
for weblogic.Deployer.
In WLS 6.1, you'll have to use weblogic.deploy which is a bit
cumbersome, but it's still certainly possible to script deployment.
-- Rob
sangita wrote:
Hi,
Please advise me how to automate in a best way to Deploy
10
different
applications(.ear/.war)
to 10 different Clusters(containing 40 Managed servers) in
wls6.1......and
that
too in a Production environment.
I know that we can use weblogic Console to deploy an application
BUT
if i have
2 unix boxes and each box contains 4-4 clusters(each containing
16-20
managed
servers) .....then i have to open up 2 Admin server consoles
to
deploy
each of
the respective applications and that too deploying these applicationto 8 clusters.....OR
i can use deploy commad to do the same.
AND if i have like 100 clusters .....then i would have to "deploy"100 times ......
is there any way that we can BEST AUTOMATE this process.
Thanks a lot.
-sangita

What is the "best" way to configure iTunes on an iMac with personal user acounts so each user can access the media library but sync devices on their personal user account?

I am trying to determine the best way to set up our imac so each user account can access the same media (songs, movies etc.) through itunes and also back up and manage their personal devices under their own personal user account. There are 4 users on our iMac. Me, my wife, and our 2 children. We have built an extensive library of music/media together using the same iTunes store account. I would like to establish a seperate apple id and iTunes store account for each of us going forward but have the ability for each of us to share our purchases. What is the best way to configure our system and devices in order to allow shared access to media and at the same time allow for individual management of devices including contacts, apps, photos, etc. Please help, I would like to do this once!
Thank you in advance!

OK, seeing as no-one replied (presumably because a lot of this information is on the forums in bits elsewhere) here's how I've got on so far.
Applications - just went through them. About the only one I needed was my media server app. Just downloaded and re-installed, had a quick look back though my email to find the license key and it all went on fine. Installation never seemed quite right on my old machine so solved that problem too.
Movies - New iMovies just copied across the clips and projects into their respective folders. Seems to have worked but haven't checked it all that thoroughly. Some duplicate footage here but I can trim this out at some point when I get a chance to go through here.
Documents - Just copied these across.
Photos - used an app called iPhoto Library Manager. You can download for free but have to pay to use the part that consolidates your libraries. Possibly if I was willing to spend a bit more time I could have got away without using this but given I didn't know the state of my different libraries and just how many duplicates I had this was too much of a convenience to ignore. Also got my library into a state where I can now spend a few hours organising it a bit better with Faces / Events etc.
Not attempted Music or iPhone sync yet as been stuck trying to solve a problem with my power adapter.

What's the best way to manage Apple IDs for multiple devices?

Hi,
We have
a shared Macbook air
a shared iPad
my iPhone
his iPhone
We want to put one ID on the Macbook and iPad that we can use to have the same iMessage on both and that we can put a card on and use in the iTunes store etc.
We also want to have our own iMessages on our iPhones, plus be able to use the account with the cards on them to purchase and share across devices...
What's the best way to manage them all?

Welcome to the Apple Community.
iTunes is straight forward, just use the same ID on all of them.
What exactly do you want to see in messages on the Mac and iPad, messages combined from each of your phones or a different account just for both of you.
You should think about what you want in calendars, contacts etc, on your shared devices.

What is the best way to transfer my iphoto library from old imac to new imac. both have iphoto 9.2.1

What is the best way to transfer my iphoto library from current imac to my new imac. Both imacs have iphoto 9.2.1
os on old imac is 10.6.8. os on new imac is 10.7.2. I want the albums and events to stay intact. I have 4500 photos and 79 videos. 14.9 gb. looking for some advice here. Thanks so much.

Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Best way forward?

Similar Messages

Maybe you are looking for