Best way to burn a file too large for a dvd?

i have a captured video that is 5.5 gigs,should i split it into 2 parts?(if so with what application?) or is there another way? thanks.

Buy a dual-layered DVD that can handle up to 9.4 GBs. Otherwise, you have to split the file, but it won't play that way. There are several utilities like:
Split n Join
JJSplit
MacAppStuff Pieces
Split&Concat
Look for them at VersionTracker or MacUpdate.

Similar Messages

178MB file too large for 4GB DVD disc?

Using iPhoto6 on my new MacBook, when trying to burn photos to a DVD/RW I sometimes get a message that there isn't enough room. The DVD has a capacity of over 4GB, but the File Info says I'm trying to burn only about 178MB of info (Approx. 200 photos. This also happens when I try to export a second batch of photos, but before burning the disc. What am I doing wrong? Thanks.

something similar to this happened to me as well. does your blank DVD show up in the finder's source list? or does it ignore blanks that are inserted into the macbook?
in my case, it told me i needed a disk of at least the size of the file to be burned. so i changed the cd/dvd settings in system preferences so that it would ask me what to do when inserting blank cd's or dvd's. after that when i chose to burn that file it would immediate check the media then burn it. that may be your solution.

TFTP file too large for upload

I'm trying to upgrade my router via TFTP. I keep getting this File too large for TFTP error. I'm using the recommended TFTP server from Solarwinds.
There does not seem to be any setting in the server to let large file pass, It's the first time I see that, but this is the biggest IOS I had to upload. I had no problem sending the last IOS witch is only about 3MB smaller.

correct. copy ftp://userid:password@servername/directory/filename flash:
For more information, refer to the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tcf_r/cf_02ht.htm#wp1032450
Hope this helps,

File too large for volume format?

I'm trying to copy a 4.6GB .m4v file from my hard disk to an 8GB USB flash drive.
When I drag the movie in the finder, I get a dialogue telling me the file "is too large for the volume's format". That's a new one for me. If the flash drive has 8GB available, and the file is only 4.6GB in size, how is that too large? Does it have to do with the way the flash drive is formatted? It's presently formatted as MS DOS FAT 32. Is that the problem? Do I need to reformat as HFS+? Or is it some other problem?

The flash drive is pre-formatted FAT32 which has a maximum allowable file size of 2 GBs. Change the flash drive format for OS X:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.

How to backup an iMovie project that is too large for the dvd?

This may be obvious, and it was probably answered elsewhere, but I'm trying to clean off my hard drive by saving my iMovie projects to two sets of dvds (one for home and one set for safekeeping at work). When saving one project as an archive, it just says this project is too large for a disc. Is it possible to stuff it as a .sitx file and then save that onto dvd? Is there a better solution than an external hard drive (which I've had a couple of fail on me).

DVD's can only hold about 4.7 GB's of DV Stream format (the format used by iMovie).
DV Stream is 13 GB's per hour of recording so it would take 3 DVD's to "store" your data for a one hour capture.
"Export" (back to tape) or use iDVD to "burn" an MPEG-2 version of your file.
Only the "tape" version would not require some type of conversion on import.

Movie file too large for iDVD

I have a 13GB .mov file created using FCE Exported w/QT Conversion (prior it was a 30GB file) but it's still too large to place on DVD using iDVD. Is there a way to (1) Shrink my file size to be compatible with iDVD or (2) re-set iDVD to accept larger file sizes (I don't use dual layer discs)? If the answer to both of those is no, is there a specific DVD conversion software that is more versatile than iDVD? Thanks

The length in time is what's important for burning to DVD, not the input file size. With iDVD you can burn a video up to 2 hours in length on a single-layer DVD-r (but that capacity includes your DVD menus, titles, etc.)
Assuming your source is DV video, your original 30GB file is about 2 hrs 20 mins long. You will either need to shorten your video to less than 2 hours, or cut your video into two segments and burn it to 2 DVD-R's (one segment on each DVD-R).
Compressing the way you did by exporting to QT Conversion is only going to make your video look worse and doesn't solve the length issue - you still have a 2 hr 20 min video. After you fix the length of the movie, you should export to QT Movie, and UNcheck the option for "Make movie self-contained".

How should I handle a file too large for DVD?

I've created a 2-1/2 video of a play in FCE HD, utilizing two video tracks and three audio tracks in various spots, as well as some text transitions. With the title screens and scene index in iDVD, the movie comes in at about 8.5GB unless I switch to "Best Quality," in which case it's still 4.9GB (and doesn't look nearly as good as it should). So:
1. Is there way to end up with a more managable file size from FCE without losing quality?
2. If not, what's the best way to export a single FCE file to two movies (Acts I and II) to burn onto two DVDs?
Thanks

1) One way you could export content longer than 2 hours to DVD would be to go the dual layer route .. but you need a dual layer burner, and dual layer media. iDVD6 will handle this
If you are limited to single layer, another option would be Compressor but that is not available with FCE, only DVD Studio Pro, part of the FCP Studio suite
You could go the route of Toast 7 with Popcorn, but you would not get the fancy iDVD menus, themes, etc.
Personally, I am not impressed with the quality of DVD content (single layer) over two hours by any method
2) To split your project into two movies, create two new sequences and call them something like Part One and Part Two (gee, aren't I clever?) In you orginal sequence (Timeline) use In and Out points to define what the two parts will be ... so for Part One, set the In Point at the beginning of the timeline and find an appropriate point and hour or 90 minutes in and set an Out point.
Open the Part One Sequence (the new one) From the Browser, drag your original Sequence (My Movie, whatever you called it) into Part One. Only the In to Out will go. You may want to put a Cross Dissolve at the end to fade to black. Maybe create a Part One Ends title there. Render everything. Set your chapter Markers. Export it and create an iDVD project from that movie
Do the similar for Part Two

Why is 500kb jpg file too large for PDF readers?

I have a jpg file size of 500kb and it is too big for GoodReader and PDF reader. Adobe Reader does not appear in the "Open In" dialog. Please help. I have an iPad 2.
hawkdavis

Can you open these attachments in your email with no issues? There is no way that 500kb is too large as Diavonex has already stated.
Two thoughts - the jpgs are not being saved correctly or you have an issue with GoodReader.
Have you restarted your iPad? Quit GoodReader completely and then try again?

File too large for quick edit mode

just bought a 12 mega pixil camera. using the photoshop album has been great until now. i can not use the files for quick edit. i can import the files from my camera after doing the recomended steps but in quick edit mode i am not able to do anything with the files. I can totogglento CS and that's the only way to do any editing but it is time consuming. After a wedding i have about 2000 photos to edit and it's just fufrustratingo have to toggle each time for a quick fix like auto balance, i have 1G of RAM and i have version 3 and have had no luck.
Thank you for your help. if you have been successful in editing a 12 megapixil file please let me know....
Zoya

More information on this issue....
I am importing them as JPEG.
I have cropped the photos by 1/100th of it's original size so by definition i am reducing the pixels.
ie, original jpg file is 3.5 MG photo:4368x2912 file type is jpg
camera canon eos 5d
error message is: "the photo you are tying to edit is too large and cannot be eidited. please try usign adobe photoshop or adobe photoshop element s to eidt this photo."

Best way to downconvert from HD to SD for SD DVD... Help...

Ok gentlemen... I'm some tens of hours into this frustration and have hardly any hair left to pull out.
I'm building a main menu for SD DVD in DVDSP.
The entire menu is a quick time file with all graphics and text included, set as back ground in DVDSP, with the buttons drawn over the top.
So Im in FCP building this video for the background of my main menu. It is a composite of video, some motion graphics, live type some and Photoshop stills.
Im building for SD however I want the menus to appear 16x9 and since most of my footage is HDV 1080i I built everything in 1080i thinking I could down convert after.
my first out put was HDV 1080i60 which is native... what I have been editing and compositing in through out. It looks fine.
I run this 1080i Qt through compressor multiple times trying to convert to DV NTSC 4x3. 720x480 3x2... I try every combination I can think of... crop dont crop letter box, anamorphic... everytime my resulting QT is either distorted or degraded beyond acceptability. the text has fallen apart the video is fuzzy etc. All I want to do is Down convert to SD!
So I bring the original 1080i output back into FCP because I don't want it to have to re-render this monster every-time I out-put. It looks exactly the same when viewed from FCP. I try to do the same thing with QT conversion... same problem.
So next I tried to do it in FCP by simply creating a new sequence with the desired dv settings and making the size conversions and re-rendering. same deal.
I went back to DVDSP and Attempted to create an HD project... new project ... modify the project and general prefrences. I cannot import the original HDV 1080i video output as an asset. the message reads incompatible format.
Question is :
Can anyone recommend to me the method, the format, and the program to convert HDV1080i60 to what ever SD format DVDSP will haphazardly accept... please... anybody.
I realize that some of you would like to know what the specs are on this vast multitude of useless dv QT's that I have produced. unfortunately I do not have the energy to produce such post. J/K I will be glad to supply whatever data i have failed to list here if it will help some on to help me. Ask away...

If your final output is SD, I would set the camcorder to downconvert to DV and capture the footage as DV. Then you don't need to worry about the whole HD->SD thing anymore and things will happen much faster.
Also, if you're creating an asset that will be rendered by DVDSP into a menu by adding buttons, etc, I wouldn't compress it to .m2v prior to importing into DVDSP. The reason is you'd be compressing (i.e. throwing out information) and then adding your buttons and then letting DVDSP recompress the menu again and throw out even more information leading to poorer quality.
Finally, you mentioned your source footage is 16:9 and you want 16:9 menus. Why did you convert to 4:3?

IMovie file size too large for one DVD

I've created my iMovie file and am ready to burn a DVD using iDVD to view on TV. Although my iMovie is only about 35 minutes, it is 7.73 GB. It is a simple movie. I only have a few titles, cross dissolves between clips and some audio.
How do I reduce my iMovie to fit on one DVD?
I don't have the option to "Export" under the "File" menu. And I've tried several of the "Share" formats which reduce the size, but none of them have given me TV viewing quality.
I am using iMovie HD 5 and the movie is widescreen.
Thanks!

iDVD encodes (compresses) the video before burning
the DVD, so there's no problem. Your iMovie project
will fit.
The iDVD capacity is best expressed in time instead
of size. iMovie 4/5 can include up to 2 hours of
video. A little less, counting iDVD features.
Karl
Hi Karl
I have an iMovie file that is 3hr and 10min long. I have a dual layer burner and dual layer DVD's to burn onto. Will this file fit onto the 8.5GB disc? or do I have to compress it somehow? If there is some software that will do this could you let me know?
The dual layer DVD's say they will fit 215 min of video on them, so why does it reject my file when starting iDVD?
Thanks for your help

I get an error message File too large for formatted drive when trying to copy a large video file (~50GB) to a new 64 GB USB drive. Any thoughts?

I am copying from a MAC to the new drive - not sure the format of the USB drive, whatever the SANDISK Cruzer is default formatted to..

You state that Cruzer is formatted which is proably FAT32. FAT32 has limits on file size of 4 GB.
Since you are copying larger files then you will need to reformat.
Allan

Exported files too large for email loop

I work with an online writers critique group. Since the most recent update, all files that I exported from Pages to Word to email to the loop have been rejected as being over 500KB.
While the critiqued documents are in Pages format, I see a Reduce File Size option in the dropdown menu. When I click it, I receive the message that all media files are at their optimum size.
Does anyone have a solution?

I don't know of any way to reduce file sizes for Pages output other than to export them to PDF and then use Acrobat's file compression option to squeeze out the junk. There also are other apps out there for compressing PDFs. There are apps for converting PDFs to Word. However, I do not think the PDF loop will solve the problem. When the stuff comes back into Pages or Word, the overhead of these apps will be added to the text.
My suggestion is for your group to switch to Acobat PDF for review. We use Acrobat PDF files for reviewers. That way we do not have to worry about what word processing app a reviewer has installed, including on iPads and other tablets. Acrobat has extensive features for annotation and comment. And, Acrobat has excellent file comparison, which is character accruate.
I hop this is helpful.

A video file too large for iweb

iweb suggests a max of 10 mb for the video added to the video pages. How can I put a 188 mb video created in FCE HD on the web? thank you joankvh

iweb suggests a max of 10 mb for the video added to the video pages.
True. But you are not limited to 10 MBs. I have placed 2 files just under 167 MBs on iWeb. You would do better to check your total video data rate when considering the posting of larger files like this. If the total video data rate is on the order of 1.0-1.1 Mbps and are targeted for high-speed Internet users, then your targeted users should be able to watch them via the "Quick Start" cache option and will probably not be bothered by long loading times.
How can I put a 188 mb video created in FCE HD on the web?
If you have a reasonably good high-speed ISP service, publish the movie page normally.

File too large for the stage

Hello
Am encountering an issue regarding the size of images I am seeking to import onto the stage in Edge.
I create a graphic in Illustrator, save the file as an SVG file and then I import/copy the file into Edge.
The size of the graphic is always smaller than the pixel dimension of the stage.
But on every occasion, I encounter a notification error message just below the right hand corner of the stage; it reads 'Images greater than 1024x1024px may cause unexpected behaviour on mobile devices'.
When I continue regardless and import my OAM file into an article in Indesign, the animation plays fine, but am concerned by why this error message continues to appear.
I fear the animation will not play on any other mobile devices.
Anyone aware of this issue??
Thanks
Sean

Is it just text? You can place it inside a dynamic text field and simply drag a UIScrollBar component to the text field. It will automatically snap to the right by default and take control of the text scrolling for you. To open the components list, open Window || Components or press CTRL+F7.

Best way to burn a file too large for a dvd?

Similar Messages

Maybe you are looking for