Best way to change my Apple id on iPhone

Years ago my wife and I shared my apple id. She now has her own account and id, but we still see linking in our calendar and other places - unwanted linking, but cannot seperate it.
I'm getting a new device in a couple of days and want to be able to link with my self only. I'm guessing creating an all new id is going to be my solution.
Any advice on the best way to set up a new id, and keep all of my paid for apps?

You can share the same ID for purchasing from the iTunes and App stores without creating any issues. But you should use separate IDs for other services such as iCloud, iMessage, FaceTime, etc. When you get your new phone, restore it to the backup of your old one to transfer your data and settings (http://support.apple.com/kb/HT2109) and set up your shared iCloud account to sync your iCloud contacts, etc. to your phone. Then to migrate your data to a new iCloud account, go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. Your wife's phone will not be effected by this.) Next, set up a new iCloud account on your phone using a separate Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the unwanted data (such as deleting your wife's contacts from your account, and vice versa). These changes will be reflected on each phone.
If you are sharing the same ID for iMessage, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in your your new ID. If you are sharing the same ID for FaceTime, do the same thing in Settings>Facetime.

Similar Messages

Best way to change fund posted in an EBS document

What is the best way to change the fund in one line item in a document produced when the electronic bank statment is processed? The bank charges fees that come through the statement and should post to a different fund then any other item such as checks, etc.
I am trying a substitution but coming across the error Field COBL-KOSTL. does not exist in the screen SAPLKACB 0002.

The error message that I was receiving...Field COBL-KOSTL. does not exist in the screen SAPLKACB 0002, was coming from function module EXIT_RFEBBU10_001 and include ZXF01U01. The programming code was attempting to default a cost center when the external transaction code = 661. The coding was removed and the default acct assignment cost center was added to the cost element master data. The substitution also worked correctly as it should.

Newbie Quesion: Best way to change colour of a movie

Hi,
Could someone tell me the best way to change the colour of
one element of a
movieclip in AS2?
Say for example I had a filled white circle in the middle of
a black square,
how can I change just the colour of the circle?
I have tried this.myColor.setRGB( color ); but that sets the
entire clip to
be of one colour. Do I need ( as I suspect ) one clip on top
of another or
is there any way of keeping details of the clip being
changed?
TIA
Wil

Cheers jdh,
This is one method I'd considered.
I'll give it a bash.
Wil
"jdh239" <[email protected]> wrote in
message
news:ens1vd$ahn$[email protected]..
> Don't know if this will help, but this code changes the
color of my
> "LOADING"
> text while it is loading. Should have the essential code
to do what you
> are
> looking for.
>
> Make the white circle a movie clip and pick the
following code apart to
> get it
> to change colors:
>
>
>
> stop();
> loading.gotoAndPlay(1);
> import flash.geom.ColorTransform;
> import flash.geom.Transform;
> var colorTrans:ColorTransform = new ColorTransform();
> var trans:Transform = new Transform(loading);
> trans.colorTransform = colorTrans;
> loadI = setInterval(loadF, 100);
> function loadF() {
> percent =
Math.floor(_root.getBytesLoaded()/_root.getBytesTotal()*100);
> if (percent<=39) {
> colorTrans.rgb = 0x0000FF;
> // blue
> trans.colorTransform = colorTrans;
> } else if ((percent>39) && (percent<60)) {
> colorTrans.rgb = 0x00FF00;
> // green
> trans.colorTransform = colorTrans;
> } else if ((percent>60) && (percent<80)) {
> colorTrans.rgb = 0xFF8000;
> // orange
> trans.colorTransform = colorTrans;
> } else if ((percent>80) && (percent<99)) {
> colorTrans.rgb = 0xFF0000;
> // red
> trans.colorTransform = colorTrans;
> } else if (percent>=99) {
> clearInterval(loadI);
> _root.gotoAndPlay(16);
> } else {
> loading.gotoAndPlay(1)
> }
> }
>

Best way to change partition key on existing table

Hi,
Using Oracle 11.20.3 on AIX.
We have a table about 800 million rows and 120gb in size.
Want to try copies oif this table to evalaute different partitiong strategies.
What is the quickest way to do this?
Would have liked say datapump table 1 tro disk and datapumo import the data to new table but do the tables need to be of the same format.
Thanks

>
Using Oracle 11.20.3 on AIX.
We have a table about 800 million rows and 120gb in size.
Want to try copies oif this table to evalaute different partitiong strategies.
What is the quickest way to do this?
Would have liked say datapump table 1 tro disk and datapumo import the data to new table but do the tables need to be of the same format.
>
First your subject asks a different question that the text you posted: Best way to change partition key on existing table. The answer to that question is YOU CAN'T. All data has to be moved to change the partition key since each partition/subpartition is in its own segment. You either create a new table or use DBMS_REDEFINITION to redefine the table online.
Why do you want to export all data to a file first? That just adds to the time and cost of doing the op.
What problem are you trying to use partitioning to solve? Performance? Data maintenance? For performance the appropriate partitioning key and whether to use subpartitions depends on the types of queries and the query predicates you typically use as well as the columns that may be suitable for partition keys.
For maintenance a common method is to partition on a date by year/month/day so you can more easily load new daily/weekly/monthly data into its own partition or drop old data that no longer needs to be kept online.
You should use a small subset of the data when testing your partitionings strategies.
Can you do the partitioning offline in an outage window? If not then using the DBMS_REDEFINITION is your only option.
Without knowing what you are trying to accomplish only general advice can be given. You even mentioned that you might want to use a different set of columns than the curren table has.
A standard heap table uses ONE segment for its data (ignoring possible LOB segments). A partitioned/subpartitioned table uses ONE segment for each partition/subpartition. This means that ALL data must be moved to partition the table (unless you are only creating one partition).
This means that every partitioning scheme that uses a different partition key requires ALL data to be moved again for that test.
Provide some information about what problem you are trying to solve.
>
Is this quicker than datapump?
>
Yes - exporting the data simplying moves it all an additional time. Ok to export if you need a backup before you start.
>
Found artcle which talks about using merge option on datapump import to convert partitioned table to non-partitioned table.
>
How would that apply to you? That isn't what you said you wanted to do.

Best way to change info on iphone

I am taking over my mom's iphone. What is the best way to erase the apple account and set up with mine? I have logged in with mine but her account keep pop out and ask me for password. Pls help me and thx.

Yes.
All 3rd party apps - all paid and free apps include DRM protection which is tied to the iTunes account used to download the apps with. In order to update the apps your Mom downloaded with her iTunes account, you will need to have access to her iTunes account and password.

Best Way to Change Source System Client

We initially had a ECC source client for BI as 35. But over time, we suffered with good test data because the ECC team use client 15 and not 35. We want to change BI 7 to use client 15. I have created a new source system in RSA1 for Client 15 but when I try to delete client 35 and /or change the source client on a datasource, all the data mappings are deleted!
I would really appreciate any advice or information on the best way to change the source R3 client for Bi without losing data mappings. Point awarded and much respect
Warm regards
Lee Lewis

Hi,
Yes. There is a way to change the source system without deleting the old system. Please use the T.code BDLS and for more information refer the below link
Re: Changing a Source System.
OSS note 886102 will also give more information about this.
Hope it helps.
Thanks.

Best way to change config then change it back after a while.

I spent some time today trying a couple approaches to this, but they all seemed a little klunky.
I'm looking for the best way to change the BGP prefixes which are advertised out to an ISP, based on some check. I want to set a timeout so the router won't attempt to send the route again for say 30 minutes after it is triggered, but then will start advertising it again, and monitor to see if the trigger condition returns. If the trigger condition returns then again withdrawl the route for 30 minutes and so on.
I'm using a prefix-list already to limit outbound route advertisments, so it seems simplest to just make a config change to remove one line in the prefix-list, then a few minutes later put it back.
I tried just using the "cli command wait", but if I set the wait period too long, the applet seemed to die, and never ran the later cli commands to put the prefix-list line back. There is also a exit-time clause for the event, but I couldn't figure out how to put the line back after the exit-time expired. Lastly I tried doing an event with a watchdog timer, but also couldn't get that to work either. Before I spend too much time working on differant options, I wanted to see if anyone had any recommendations.
I've done some TCL scripting on Cisco routers, but that seemed to be overkill for this, and I wanted to keep the config easy to manage for peers who might not be as proficient in TCL scripting.
This is intended for ASR-1002X routers if it matters.
Any suggestions would be much appreciated.
Thanks
Derek

Thanks for all your help Joe.
Ok, so here is my current script, which seems to be working pretty well (changing to entry-type "value" fixed the variability in detection times). For testing in the script below, I'm using a 30 second timeout for when the line gets put back, and a 60 second timeout for when monitoring should resume after the event is triggered. The script checks the value of the OID every 5 seconds.
The only other thing I would like to do with it that I can't figure out, is how to use an environment variable for the exit-time. Ideally, I would just add a value, like 10 seconds, to the ATimeout variable. However I can't figure out the syntax to just use a var for the exit-time. Anyone know the secret (or if it is possible?)
event manager environment ATimeout 30
event manager environment q "
no event manager applet DDOS_RESPONSE01
event manager applet DDOS_RESPONSE01
event snmp oid 1.3.6.1.4.1.9.9.166.1.17.1.1.21.80.65538 get-type exact entry-op gt entry-val "0" entry-type value exit-time 60 poll-interval 5
trigger
action 001 cli command "enable"
action 002 cli command "config term"
action 003 cli command "no ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32"
action 004 syslog msg "DDoS Attack Detected. Removing Web Srvr Subnet from PUBLIC_NETWORKS for ($ATimeout) seconds."
action 005 cli command "event manager applet RESTORE_PREFIX"
action 006 cli command "event timer countdown time $ATimeout "
action 007 cli command "action 101 cli command $q enable $q"
action 008 cli command "action 102 cli command $q config term $q"
action 009 cli command "action 103 cli command $q no event manager applet RESTORE_PREFIX $q"
action 010 cli command "action 104 cli command $q ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32$q"
action 011 cli command "action 105 syslog msg $q DDoS Attack Timeout ($ATimeout) reached. Re-adding Web Srvr Subnet to PUBLIC_NETWORKS. $q "
action 012 cli command "action 106 cli command $q no event manager applet RESTORE_PREFIX $q"
exit
event manager environment ATimeout 30
event manager environment q "
event manager applet DDOS_RESPONSE01
event snmp oid 1.3.6.1.4.1.9.9.166.1.17.1.1.21.80.65538 get-type exact entry-op gt entry-val "0" entry-type value exit-time 60 poll-interval 5
trigger
action 001 cli command "enable"
action 002 cli command "config term"
action 003 cli command "no ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32"
action 004 syslog msg "DDoS Attack Detected. Removing Web Srvr Subnet from PUBLIC_NETWORKS for ($ATimeout) seconds."
action 005 cli command "event manager applet RESTORE_PREFIX"
action 006 cli command "event timer countdown time $ATimeout "
action 007 cli command "action 101 cli command $q enable $q"
action 008 cli command "action 102 cli command $q config term $q"
action 009 cli command "action 103 cli command $q no event manager applet RESTORE_PREFIX $q"
action 010 cli command "action 104 cli command $q ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32$q"
action 011 cli command "action 105 syslog msg $q DDoS Attack Timeout ($ATimeout) reached. Re-adding Web Srvr Subnet to PUBLIC_NETWORKS. $q "
action 012 cli command "action 106 cli command $q no event manager applet RESTORE_PREFIX $q"
exit

Best way to change workstation

What is the best way to change the workstation name and import it into
edirectory.
We constantly have user change computer name. Most of the time when we
change the computer name it takes day to reflect on the edirectory. When
rename the workstation object, we cannot even remote to the workstation.
I have problem remote to through user name, I keep getting user does login
when in fact the user is login. We have netware 6.5 with the latest
service pack.

Sang,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Best way to change TreeMap value?

Hello,
I am wondering what is the best way to change a value in a TreeMap? I have retrieved a value by .get on the key i.e.
String aString = (TreeMap) aTreeMap.get(aKey);but would now like to change aString and ?.put? it back into the map?
How would I do this?
Thank you,
Poot.

but would now like to change aString and ?.put? it
back into the map?Do I just have to keep a note on the (key,value) - especially key - change the value and then .put(key,value) back in? Though I'll need to remove the initial pairing if I do this since TreeMap won't allow duplicate keys!
There must be an easier way as this.
Thank you for your reply,
Regards,
Poot.

Best way to change the speed of a sequence of linked short clips?

I have a sequenced project of about 150 short 1 second clips linked together via a crossfade transition... I would like to make the timelapse faster. What is the best way to change the speed of the sequence or the clips themselves? I would rather change the sequence for it would be less labor intensive I would imagine!!
Thanks
RD

Or...select all the clips in the timeline, control-click (or right-click) on them and select 'Duration'. Change the duration to whatever will fit/fill the timespan you need, then hit OK.
If you're needing to change the dissolve as well, you should remove all but one of them first, then drag the remaining transition into the browser. Dbl-click it into the viewer, set the duration of what you want, then use the hand icon at top right and drag it back into the browser. Rename it relevent to it's new duration, then control-click on it and select "Make Default".
Now, set an inpoint at the first frame of your clips in the timeline, then drag all the shortened clips from the timeline into the canvas and release where it says 'Overwrite with Transition'.
That's another way to accomplish this.
K

HT4436 is there a way to change the apple ID on an Icloud account? I used to share everything with my daughter but she's old enough we need to separate the accounts.. I would like to "give" the ICloud account to her, because all of her games are on it.

Is there a way to change the apple ID on an Icloud account? I would like to "give" an ICloud account to my daughter. We used to share one, but she's getting older I would like to split our accounts. She has her own Apple ID but since all her games are on this ICloud account, I would like to give it to her and start my own.

You can migrate your device and a copy of the iCloud data to a new account. To do this, start by saving any photo stream photos you wish to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow, then tapping Save to Camera Roll. If you are syncing notes with iCloud, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; your daughter's device won't be effected by this), choose Keep on My iPad and provide the password when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload the data.
Once you are on separate accounts you can each go to icloud.com and delete the other person's data from your account.
The existing iCloud email account cannot be moved to your new account so you will need to give your contacts your new email address if you are giving the account to your daughter.

HT204053 Our macs were set up with an incorrect Apple ID. Is there any way to change the Apple ID associated with these macs?

Our macs were set up with an incorrect Apple ID. Is there any way to change the Apple ID associated with these macs? This causes increased frustration during the updating process. After maverick we cannot edit the id being used anymore.

If you can prove ownership to the Macs, call Apple Care and request the Account Security Team.

What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

You can't share with other devices if you are using different Apple ID's and iTunes account on them. You can only share if you use the same ID.

What's the best way to replace front glass on an iPhone 4?

My grandson has a 4 and has cracked the front glass. Trying to find the best cost effective way to replace the glass.

i don\'t want an alias!! wrote:
What's the best way to replace front glass on an iPhone 4?
Take it to an Apple Store for out of warranty exchange fro $149.
This way you get a refurb iPhone including new battery.
See this -> http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149

Iphone 4s coming friday, what is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across.

What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.

First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem!

Best way to change my Apple id on iPhone

Similar Messages

Maybe you are looking for