Best way to configure Photoshop workflow settings when source photos are shot in AdobeRGB, edited using a wide gamut display, and output to sRGB?

Being able to quickly produce finished photos is of importance with the majority of my photography work. Therefore I shoot, process, and deliver JPEG files. For this time sensitive workflow there is no benefit to my clients by my shooting RAW. I do want to be able to accommodate any possible future uses of the photos, so I shoot using the Adobe RGB color space. The output for my clients are JPEG images for use on the Web, therefore sRGB. I currently used a wide gamut display (NEC PA302W) with a 24-bit graphics card. (I plan on upgrading to a 30-bit card sometime in the future.)
I've noticed that in Internet Explorer the reds in my finished photos are overly intense on my display. My photos look fine in other web browsers on my display. This situation has me concerned as I do not know exactly why it is happening since my photos have the sRBG color profile embedded and IE supports embedded color profiles. If anything, I would think the reds would be overly intense in other applications that do not support embedded color profiles.
Please let me know if my workflow can be improved, outside of shooting RAW and using a 30-bit display:
Shoot JPEG photos in Adobe RBG color space
Edit photos in Photoshop using wide gamut display, 24-bit
Color Settings: Monitor Color (Monitor RGB - PA302W, calibrated)
Save for Web, JPEG, Embed Color Profile, Convert to sRGB
While working in Photoshop the reds appear fine. When saving for the Web and previewing 'Monitor Color' the reds are intense, when previewing 'Internet Standard RGB (No Color Management)' the reds appear fine. The final saved images look fine with the exception of when displayed in IE, which supports embedded color profiles- Color Management.

You're rapidly making a mess out of this. Stop, sit back, and stop thinking there's a "problem" to "fix". There isn't - you just need to use software that is color managed. That disqualifies IE right off. Stop using it, throw it away. It's useless with wide gamut displays. Use Firefox, which has proper color management.
OK. Save For Web in sRGB, embed profile. So far so good. But:
Don't ! set your working space to Monitor Color!. That turns off display color management which is the very last thing you want with a wide gamut monitor. You could sort of get away with that with a standard gamut monitor, because it's not all that different from sRGB anyway. So you wouldn't notice the difference (but it's there). The fact that your Adobe RGB files look right in Photoshop is purely coincidental. Any other profile will look wrong.
With a wide gamut display you absolutely and unconditionally need a fully color managed pipeline. That means 1. an embedded document profile, 2. a valid display profile (Spectraview or other calibrator), and 3. an application that reads both profiles and does the conversion from one to the other as the image is sent to the display.
See, it's not just the document profile. That's half of it. The other half is the display profile. IE doesn't use the display profile, instead substituting sRGB. And that's very wrong with that monitor. Firefox is fully color managed if there is an embedded document profile. But it can be configured to color manage even if the image is untagged (and a lot of material on the web is untagged). It does this by assigning sRGB to the image.
To configure this - and you really need that with a wide gamut monitor - type "about:config" without the quotes in the address bar and hit reload. Scroll down to gfx.color_management.mode, and change it from 2 to 1. Relaunch. All web material will now appear correctly regardless.

Similar Messages

With photoshop Element 13, when several photos are open it's impossible to chose which photo To print

I have 1ç photos open and I create another picture to include many photos inside, then I want print this, normaly when you open the printing window this photo appear, but in this case only one photo appear on this window
I try to select all calcs, to do only one calc without result
If I close all others picture, then I can print good, but this problem is very very penalizing to work
Have you a solution ??

This problem appear with iMac and Mac OS X 10.10

Best way to configure a network comprising WLSE and many APs ?

Hi the Cisco NetPro community,
I would like to have a discussion with you on the best way to configure a network containing a WLSE and a large amount of Access Points.
The network I want to configure comprises some subnetnorks, each comprising about 10 access points (with some advanced settings for security). It might be a quite long and boring process to set the configuration for all those, so I am looking for the quickest and easiest solution to do so.
First of all, the configuration of IP addresses have to be done on each Access Point after unpacking it. The configuration of my network comprises 1 WDS active AP, 1 WDS backup AP and the rest of infrastructure APs, that for each developement site.
I thought about several solutions :
- 1st solution could be to apply a configuration file (i.e. load the config.txt file) to each AP manually, changing some values (IP, local radius...).
But problem is that passwords can't be changed with text editor because of the passwords written in "hash".
- 2nd solution could be to configure each AP (after IP is set) using its web interface.
No more problem for hash written passwords, but this method is quite boring when surfing on menu pages of the AP web interface...
- 3rd solution, which could appear as the best solution, is to create a template on the WLSE, and to apply it to all APs.
No more boring connection to each AP, but problem are : we need to create as many templates as APs (or change some parameters each time), and we still need to set parameters directly to APs before (SNMP, SSH, WDS configuration...), in order the WLSE to manage the APs.
So, what do you think could be the best solution in order to deploy such a network with many APs ?
How is it possible to avoid (so far as we can) the configuration of APs one by one ?
Thanks a lot in advance for your consideration and your ideas !
Alexis.

Well for one of my clients that had over 60 sites, we actually created a couple of templates. We created a basic template and a template for each site. You can have the ap's obtain the configuration from the WLSE, but you need to configure a DHCP option. My client did mac address reservations, but of course you need the mac address first. I guess you can also let the ap get an address and change it later. They tried doing different things, first let the ap obtain a default config and then pushing out the configuration for that site.
As for the hash, you can set the password in ascii... when you do a show run, then of cours it will be hash'd.
http://www.cisco.com/en/US/docs/wireless/wlse/2.12/user/guide/deploywz.html#wp1936755

What is the "best" way to configure iTunes on an iMac with personal user acounts so each user can access the media library but sync devices on their personal user account?

I am trying to determine the best way to set up our imac so each user account can access the same media (songs, movies etc.) through itunes and also back up and manage their personal devices under their own personal user account. There are 4 users on our iMac. Me, my wife, and our 2 children. We have built an extensive library of music/media together using the same iTunes store account. I would like to establish a seperate apple id and iTunes store account for each of us going forward but have the ability for each of us to share our purchases. What is the best way to configure our system and devices in order to allow shared access to media and at the same time allow for individual management of devices including contacts, apps, photos, etc. Please help, I would like to do this once!
Thank you in advance!

OK, seeing as no-one replied (presumably because a lot of this information is on the forums in bits elsewhere) here's how I've got on so far.
Applications - just went through them. About the only one I needed was my media server app. Just downloaded and re-installed, had a quick look back though my email to find the license key and it all went on fine. Installation never seemed quite right on my old machine so solved that problem too.
Movies - New iMovies just copied across the clips and projects into their respective folders. Seems to have worked but haven't checked it all that thoroughly. Some duplicate footage here but I can trim this out at some point when I get a chance to go through here.
Documents - Just copied these across.
Photos - used an app called iPhoto Library Manager. You can download for free but have to pay to use the part that consolidates your libraries. Possibly if I was willing to spend a bit more time I could have got away without using this but given I didn't know the state of my different libraries and just how many duplicates I had this was too much of a convenience to ignore. Also got my library into a state where I can now spend a few hours organising it a bit better with Faces / Events etc.
Not attempted Music or iPhone sync yet as been stuck trying to solve a problem with my power adapter.

Best Way to Configure Multi-boot System With GRUB/GRUB2

Hello again,
Sorry for posting so much, but I'm really enjoying Arch so far! I had been reading a lot about Cinnamon so I wanted to try it (without installing the dependencies on my Arch installation), so I decided to install Mint, that went fine, and then I was hoping to add the entry to GRUB. I couldn't figure out how to do this, so I decided to try and install GRUB2 because it can autodetect other OS'. Well it didn't work and then I found myself without a bootloader. I couldn't figure out how to reinstall grub to the MBR (I tried the solution in the wiki and a couple of other places). I decided to reinstall Mint, and now I am booting into Arch through Mint's GRUB2. Two questions:
1) How can I fix grub through Arch to have that as my bootloader again? Nothing seems to work that I've tried.
2) What is the best way to configure grub or grub2 from Arch to allow myself options to multiboot other OS's in the future? I want to learn as much about UNIX as possible so I was planning on installing some other Linux distros and some other non-Linux UNIX OS's. I know this is a really newbie question, but I'm at a loss, I thought it was easier than it turned out.
PS. I didn't really like Cinnamon that much. I've been using Xfce and Openbox since I started using Linux (about a month ago), and it just seems too complicated! I don't like how little options you are given for customization. But that's just my opinion, everyone is different, I can see how it would be an improvement over GNOME3.
Thank You!

I have Arch Linux and Debian Testing installed side by side on my laptop.
Arch uses Grub (legacy) and Debian uses Grub2. The way I have set it up is to have Arch's Grub on the MBR and then chainload Debian's Grub2 from there.
Debian's Grub2 is installed on its own partition rather than on the MBR
This is the line I use to chainload Grub2 from Grub (legacy)
# (4) Debian chainload
title Debian chainload
root (hdX,X)
chainloader +1
Additionally just for kicks, I also have an entry in Grub2 to get back to Grub.
menuentry "Arch Linux chainload" {
insmod part_msdos
insmod ext2
set root='(hd0)'
chainloader +1
boot
Note that the (hd0) above always points to the MBR.
I do not have to bother with one bootloader interfering with the other and the OS entries on each are handled separately on their own.
This setup has worked well for me for quite a while now. Before I started with Arch, I used a similar setup when I tried out various distros (Fedora,opensuse,etc.) alongside Ubuntu
Hope it helps !

What is the best way to configure storage device for rac?

Hi
On my disk array i have 7mirors and two conroler, what is the best way to configure environment?
My application is OLTP, it runs 6-20 o clocj, so i can do backup when nobady work
Database 10g r2, Windows 2003 enterpise
for examlep
First controler
disks 1-5 DATA
second cotnroler
disks 6-7 FLASH
or meyby share one disk on DATA and FLASH?
Thanks in advice

The best is you use ASM (maybe you do it already) and put one failure group on the first disk array and the second failure group on the second array. Then you can ASM let do the work.
Werner

What is the best way to configure password in Cisco IOS?

I am running IOS 15.2(4) on a 1921 Router
What is the best way to configure the password for the router? I have already tried once and managed to lock myself out of another switch. I would like to use the most secure method which encrypts the password.
Current Config:
username admin privilege 15 password 0 cisco123

Cisco IOS will not let me use a type 5 password. This is the error message I receive:
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
I tried generating an MD5 hash and inputting that in and that did not work either. When I do not specify type 5 it will default to using an encrypted type 4 password.
Also, what is the difference between these two enable secret commands?
enable secret 5 password
username admin privilege 15 secret 5 password

Best way to configure and connect two 4500 switches

I have a core 4507r+e in our production environment. We just acquired a 4500r and I would like to use it a distribution switch. What’s the best way to configure the new 4500r switch to connect to the core 4500 switch?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
BTW, when you link your core to your distribution, the connecting link can be L2, L3 or both.
What I wanted to bring to your attention, 4500s can often easily oversubscribe some of their ports. Much depends on the sup and line cards being used. When you want to interconnect a core and distribution, you don't want to use a port that's something like 8:1 oversubscribed. (Further, if you're doing mostly L2, and all traffic L3 has to go to the core, depending on you traffic flows, a single link might have insufficient bandwidth.)
Also from core to distribution, if possible, it's good to avoid single points of failure. So if you only have one link between them, that link's transceivers (if used), the ports connected to, the line card connected to, are all single points of failure. (Of course, with only single sups in each chassis, that too is a single point of failure. From what you've described, from a performance and redundancy standpoint, you might actually be better off using a 4510R, with your two sups [if same model] and line cards - creating a collapsed core/distribution.)

Best way to configure "announcement only" mailbox

We have a client with 2951 router with Cisco CME v8.x. They need to have their receptionist be able to call in and change the school information message from an external number. They told me that they used to be able to dial in on the main number and then push 1 to dial by extension. When they called into that extension they could push * and get into the mailbox and then access the prompt customization part of the AvT. That isn't working and doesn't really make sense to me. I have tried to dial by extension and dial the AvT extension and it says invalid number. If I make the voicemail box for the extension in question an "announcement only" they cannot push * and change the greeting. Is there a best way to configure this senario to make it easy for the receptionist to change the school information announcement from an external number? Any help would be greatly appreciated!

Its been a while I did this but if I remember correctly, need dial the pilot number to access the mailbox. So when your client dials the main number, after that dial the voicemail pilot number, then enter the user ID as mailbox of announcement only, it should then give you the options to record the greeting.
I have dismantled my lab temporarily due to some renovation otherwise I would have quickly confirmed for you from there...but do try above and let us know how you go...
-Terry

More than 16 midi tracks....best way to configure?

What's the best way to configure more than 16 midi tracks?
1) External usb midi box
2) Virtual ports
3) Apple IAC ports
4) Disconnect SUM and connect ports to channel splitters (which are then fed to the instruments)
When configuring more than 16 audio instruments, is the best way to do that to use individual midi instruments as the front end for each, setting the midi port and channel on the midi instrument?
Or...is it better to go through the channel splitters (like in #4 above)?
I've run into some kind of midi cross-talk anomaly that I can't find (still after a LONG time searching), and I can't help but think it might be in my environment setup somehow.
Anybody like a good mystery? All help appreciated!!!
Cheers,
S.

Hi,
Firstly, please get rid of the term VST. Logic only uses Audio Units, and they work a little differently "behind the scenes".
Ok. Now that you said the magic "only internal" synths phrase:
In the current Environment, I've made a separate "midi instrument" for each "audio instrument" device. I'm using the "midi instrument" to set the port and channel of each separately.
You do not need to do this. Because you are using internal synths (If you clue us in on WHICH ones....that could help too...unless that is a State Secret)
Somehow, I've managed to get the problem down to one annoying item: I have a chimes part that has some sustained notes that are being CUT OFF in mid-note. There is nothing in the Event List for that track that would explain this, so I'm guessing that the track must be receiving some midi data from someplace else.
My best guess is that you are playing back a Midi note that is, say XXX length, and the SAMPLE is only XX length. That would explain immediately why it is being "cut off".
OR...there is simply too much midi data at that point that the track....no that can't be because the music is thin there. I don't know. I just can't find it.
THAT is a delicious piece of speculation. Please inform yourself about what is really going on. Your posted question is totally misleading.
You don't need 16 tracks of Midi because ONE sound is not playing back the way you want. Your problem has NOTHING to do with the question that you put forth:
More than 16 midi tracks....best way to configure?
Where is the cut-off chime sound sample in this question??? Nowhere... and nowhere is the answer...oops...
I can't help you further, as I already spent a long time helping you set up an imaginary Midi setup that does not even exist, nor even solves your issue.
Cheers
Brought to you by the wise noeqplease, sans caffeine

Best way to configure Time Capsule with Thomson TG782T modem(Telstra)

Hi there
I am looking for the best way to configure my Time Capsule. I have an ADSL connection and use a Thomson TG782T wireless modem from Telstra as my internet connection. It is plugged into my iMac via ethernet. It also provides a wifi connection for iphones, ipads etc.
I also have a Time Capsule and am looking to use it to extend the wireless network. It doesn't seem to want to do this for me. I am guessing that the Time Capsule needs to be in bridge mode, but don't want it to create its own wireless network. Does this make sense? Any help gratefully received.
Thanks!

I also use TG782T.. although I hacked it to use on non-telstra ISP.. and so I can access voip.
But you cannot use TC to extend the wireless .. sorry that is not possible.. the Thomson is actually way behind and the only service it offers to extend is WDS and with WEP security.. so unless you plan to use G wireless and WEP .. don't even think about it.
Bridge the TC and plug it into the Thomson. Create a wireless network of identical name as the Thomson.. actually the Thomson uses a silly name.. just change it to something short and sweet.. TG782T would be excellent. You can also lock the wireless channel instead of auto and use the highest level possible security with your own password.. again not the Telstra one..
so you end up..
Now run the same settings on the TC.. go to the wireless page.. set to create a network and use same name.. same security level same password but different channel.
Your client computers will now connect to whichever device has the stronger signal.. this is called roaming network.

Best way to configure search toplogoy for multiple servers farm??

Hi,
My farm environment is 2 WFE and 2 App servers. Right now i am trying to configure Search Topology. what will be the best way to configure the search topology for this farm, so that query and crawling will be working perfectly. one thing i noticed with my
previous search application Crawl DB had grown 140 GB, i dont know why it happened. please look at the following screen shot, this the current topology but i want to distribute component to different server.
Any help will be appreciated!!

The best topology depends on whether you want it to be fault tolerant or not. For a fault tolerant design with this number of servers I normally create two Index Partitions 0 and 1 with each on one of the App servers. I then create Replicas of each
partition on the front end servers. I then put the query role on both web fronts ends and the crawl role on both Ap servers. So I end up with the following:
FE1 = Index Replica 0 + Query
FE2 = Index Replica 1 + Query
Ap1 = Index 0 + Crawl
Ap2 = Index 1 + Crawl
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Best way to learn Photoshop?

Hi there,
I'm trying to transition to a career as a graphic/web artist and before making the transition I was looking to take a photoshop and/or illustrator classes (preferably weekend classes) in the Los Angeles/Santa Monica area. I don't have photoshop on my computer so ideally I'd be able to find a class that had the program loaded on their computers already.
Any help and/or advice on how to become a graphic/web designer would be greatly appreciated. Thank you very much for taking the time.

A student can buy the whole creative suite for $599 the cost of nonstudent purchase of Photoshop standard. The best way to learn Photoshop is to have it and use it. Click on every button, menu item, and pallet/panel. don't be afraid to look in every nook and cranny, I'm always surprised by the lazy people who ask the most basic questions all because they have not put the time into looking around the application.
seriously if you are going to spend all that money on the app It seems like you would want to spend some time going over it. Think of it as a video game and you must look at everything to win.
also if you only want it to crop pics and print them or put them up on a simple website Elements just might be a better choice

Hi, what's the best way to replace IMAC 27'' glass when broken (latest Imac generation from end 2012) ? Thanks,

Hi, what's the best way to replace IMAC 27'' glass when broken (latest Imac generation from end 2012) ? Thanks,

Not sure about the 2012 models but the 2010 ones can be removed in seconds, using a suction cup on the top corner. I use my tomtom to lift it away. It is attached by magnets.
Hope this helps.

PhotoShop Organizer Freezes when "Getting Photos" finishes

The Organizer opens and another window opens titled “Files Ready for Import”.
With or without the box checked the only thing to do is click OK.
That starts a window titled “Getting Photos”. If there are Photos to load the progress bar fills and apparently the photos are added to the organizer but the window locks up and even the stop button does nothing. The Task Manger must be used to kill the Organizer process. This tries to run even when no new photos are available. I can not get into the Organizer to disable the "Watch Folders".
I have tried to uninstall and re-install the Photoshop Application but it made no difference.
Please see the attachment for further details and the Adobe response... or lack thereof.
Does anyone know a way to Disable the Watch function?
I would rather add the required folders/photos to the catalog manually when needed than fight this.

The screen shot from your original post was missing -- I should have asked about that before assuming the problem was really watched folders. I bet the window you're seeing looks like this:
This comes not from the Watch Folders feature but from the Adobe Photo Downloader, which downloads photos from cameras and scanners.
Apparently what's happened is that PSE terminated after the APD downloaded some photos but before they got imported into the catalog. Now every time you start PSE, it first tries to import those photos, which is crashing PSE for some reason before the photos get fully imported.
To break this cycle, delete the contents of the following folder:
Vista: C:\ProgramData\Adobe\Photoshop Elements\5.0\APDLogs
XP: C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\5.0\APDLogs
(I'm not positive about the XP folder -- I'm translating from the location on my Vista machine.) I bet there's a .xml file in that folder that contains the list of files that PSE is trying to import.

Best way to configure Photoshop workflow settings when source photos are shot in AdobeRGB, edited using a wide gamut display, and output to sRGB?

Similar Messages

Maybe you are looking for