Best way to ELIMINATE the MORAY EFFECT in a photograph that is moving?

Hi.
I have a shot of a woman in a striped dress which has a slight move on it. When I export my sequence to QT and watch in the QT player, the image looks great.
But when I burn a dvd using DVDStudio pro and watch it on a monitor, the striped dress creates that nasty moray effect that is TOTALLY distracting....
How to eliminate this? Is it simply to deinterlace that particular shot in my sequence?
Any ideas would be appreciated.
Thanks,
Mark
(sorry, I unintentionally posted this to the Motion forum as well)

Have you tried a quick test with De-Interlace?
I'll hope someone has a great fix, as I run into this from time to time.
My solution to date has been to dupe the clip on a track above and place a very slight gaussian blur filter on the top clip, then add a Garbage Matte and/or Mask Shape/Mask Feather to iso the problematic area..
Might be able to use CC3way Limit Effect and tweak some levels...haven't tried that.
IIRC, I've tried 1pixel vertical shift in Motion tab and/or several of the Video Filters/Video-Shift Fields/Flicker Filter/Image Stabilizer...all to no acceptable effect.
Maybe I've just never correctly tweaked any of the filters. Dupe/Mask/Blur has worked.
K

Similar Messages

  • What is the best way to get the minimum or maximum value from an Array of numbers?

    Let's say I have an Array of numbers: [2,3,3,4,2,2,5,6,7,2]
    What is the best way to find the minimum or maximum value in
    that Array?
    Right now, to get the maximum, I am looping through the
    Array, and resetting a variable to the value if it is greater than
    the existing value:

    Here's other approaches, the cookbook is your friend:
    http://digitalmedia.oreilly.com/pub/a/oreilly/digitalmedia/helpcenter/actionscript30cookbo ok/chapter5.html?page=7
    enjoy.

  • What's the best way to apply a detuned effect to a piano (audio or midi)?

    Hi, what's the best way to apply a detuned effect to a piano (audio or midi)? I was trying to add the detune effect to a piano to make it sound warmer and old fashioned, any suggestion?
    Thanks

    Are you looking for a Honky Tonky Piano effect?
    you need two istances of the same piano (exs24 Logic patch are great)
    use fine detune (pitch) only one of the two piano istances.
    G

  • Best way to Fetch the record

    Hi,
    Please suggest me the best way to fetch the record from the table designed below. It is Oracle 10gR2 on Linux
    Whenever a client visit the office a record will be created for him. The company policy is to maintain 10 years of data on the transaction table but the table holds record count of 3 Million records per year.
    The table has the following key Columns for the Select (sample Table)
    Client_Visit
    ID Number(12,0) --sequence generated number
    EFF_DTE DATE --effective date of the customer (sometimes the client becomes invalid and he will be valid again)
    Create_TS Timestamp(6)
    Client_ID Number(9,0)
    Cascade Flg vahrchar2(1)
    On most of the reports the records are fetched by Max(eff_dte) and Max(create_ts) and cascade flag ='Y'.
    I have following queries but the both of them are not cost effective and takes 8 minutes to display the records.
    Code 1:
    SELECT   au_subtyp1.au_id_k,
                                       au_subtyp1.pgm_struct_id_k
                                  FROM au_subtyp au_subtyp1
                                 WHERE au_subtyp1.create_ts =
                                          (SELECT MAX (au_subtyp2.create_ts)
                                             FROM au_subtyp au_subtyp2
                                            WHERE au_subtyp2.au_id_k =
                                                                au_subtyp1.au_id_k
                                              AND au_subtyp2.create_ts <
                                                     TO_DATE ('2013-01-01',
                                                              'YYYY-MM-DD'
                                              AND au_subtyp2.eff_dte =
                                                     (SELECT MAX
                                                                (au_subtyp3.eff_dte
                                                        FROM au_subtyp au_subtyp3
                                                       WHERE au_subtyp3.au_id_k =
                                                                au_subtyp2.au_id_k
                                                         AND au_subtyp3.create_ts <
                                                                TO_DATE
                                                                    ('2013-01-01',
                                                                     'YYYY-MM-DD'
                                                         AND au_subtyp3.eff_dte < =
                                                                TO_DATE
                                                                    ('2012-12-31',
                                                                     'YYYY-MM-DD'
                                   AND au_subtyp1.exists_flg = 'Y'
    Explain Plan
    Plan hash value: 2534321861
    | Id  | Operation                | Name      | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT         |           |     1 |    91 |       | 33265   (2)| 00:06:40 |
    |*  1 |  FILTER                  |           |       |       |       |            |          |
    |   2 |   HASH GROUP BY          |           |     1 |    91 |       | 33265   (2)| 00:06:40 |
    |*  3 |    HASH JOIN             |           |  1404K|   121M|    19M| 33178   (1)| 00:06:39 |
    |*  4 |     HASH JOIN            |           |   307K|    16M|  8712K| 23708   (1)| 00:04:45 |
    |   5 |      VIEW                | VW_SQ_1   |   307K|  5104K|       | 13493   (1)| 00:02:42 |
    |   6 |       HASH GROUP BY      |           |   307K|    13M|   191M| 13493   (1)| 00:02:42 |
    |*  7 |        INDEX FULL SCAN   | AUSU_PK   |  2809K|   125M|       | 13493   (1)| 00:02:42 |
    |*  8 |      INDEX FAST FULL SCAN| AUSU_PK   |  2809K|   104M|       |  2977   (2)| 00:00:36 |
    |*  9 |     TABLE ACCESS FULL    | AU_SUBTYP |  1404K|    46M|       |  5336   (2)| 00:01:05 |
    Predicate Information (identified by operation id):
       1 - filter("AU_SUBTYP1"."CREATE_TS"=MAX("AU_SUBTYP2"."CREATE_TS"))
       3 - access("AU_SUBTYP2"."AU_ID_K"="AU_SUBTYP1"."AU_ID_K")
       4 - access("AU_SUBTYP2"."EFF_DTE"="VW_COL_1" AND "AU_ID_K"="AU_SUBTYP2"."AU_ID_K")
       7 - access("AU_SUBTYP3"."EFF_DTE"<=TO_DATE(' 2012-12-31 00:00:00', 'syyyy-mm-dd
                  hh24:mi:ss') AND "AU_SUBTYP3"."CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00')
           filter("AU_SUBTYP3"."CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00' AND
                  "AU_SUBTYP3"."EFF_DTE"<=TO_DATE(' 2012-12-31 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
       8 - filter("AU_SUBTYP2"."CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00')
       9 - filter("AU_SUBTYP1"."EXISTS_FLG"='Y')Code 2:
    I already raised a thread a week back and Dom suggested the following query, it is cost effective but the performance is same and used the same amount of Temp tablespace
    select au_id_k,pgm_struct_id_k from (
    SELECT au_id_k
          ,      pgm_struct_id_k
          ,      ROW_NUMBER() OVER (PARTITION BY au_id_k ORDER BY eff_dte DESC, create_ts DESC) rn,
          create_ts, eff_dte,exists_flg
          FROM   au_subtyp
          WHERE  create_ts < TO_DATE('2013-01-01','YYYY-MM-DD')
          AND    eff_dte  <= TO_DATE('2012-12-31','YYYY-MM-DD') 
          ) d  where rn =1   and exists_flg = 'Y'
    --Explain Plan
    Plan hash value: 4039566059
    | Id  | Operation                | Name      | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT         |           |  2809K|   168M|       | 40034   (1)| 00:08:01 |
    |*  1 |  VIEW                    |           |  2809K|   168M|       | 40034   (1)| 00:08:01 |
    |*  2 |   WINDOW SORT PUSHED RANK|           |  2809K|   133M|   365M| 40034   (1)| 00:08:01 |
    |*  3 |    TABLE ACCESS FULL     | AU_SUBTYP |  2809K|   133M|       |  5345   (2)| 00:01:05 |
    Predicate Information (identified by operation id):
       1 - filter("RN"=1 AND "EXISTS_FLG"='Y')
       2 - filter(ROW_NUMBER() OVER ( PARTITION BY "AU_ID_K" ORDER BY
                  INTERNAL_FUNCTION("EFF_DTE") DESC ,INTERNAL_FUNCTION("CREATE_TS") DESC )<=1)
       3 - filter("CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00' AND "EFF_DTE"<=TO_DATE('
                  2012-12-31 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))Thanks,
    Vijay

    Hi Justin,
    Thanks for your reply. I am running this on our Test environment as I don't want to run this on Production environment now. The test environment holds 2809605 records (2 Million).
    The query output count is 281699 (2 Hundred Thousand) records and the selectivity is 0.099. The Distinct values of create_ts, eff_dte, and exists_flg is 2808905 records. I am sure the index scan is not going to help out much as you said.
    The core problem is both queries are using lot of Temp tablespace. When we use this query to join the tables, the other table has the same design as below so the temp tablespace grows bigger.
    Both the production and test environment are 3 Node RAC.
    First Query...
    CPU used by this session     4740
    CPU used when call started     4740
    Cached Commit SCN referenced     21393
    DB time     4745
    OS Involuntary context switches     467
    OS Page reclaims     64253
    OS System time used     26
    OS User time used     4562
    OS Voluntary context switches     16
    SQL*Net roundtrips to/from client     9
    bytes received via SQL*Net from client     2487
    bytes sent via SQL*Net to client     15830
    calls to get snapshot scn: kcmgss     37
    consistent gets     52162
    consistent gets - examination     2
    consistent gets from cache     52162
    enqueue releases     19
    enqueue requests     19
    enqueue waits     1
    execute count     2
    ges messages sent     1
    global enqueue gets sync     19
    global enqueue releases     19
    index fast full scans (full)     1
    index scans kdiixs1     1
    no work - consistent read gets     52125
    opened cursors cumulative     2
    parse count (hard)     1
    parse count (total)     2
    parse time cpu     1
    parse time elapsed     1
    physical write IO requests     69
    physical write bytes     17522688
    physical write total IO requests     69
    physical write total bytes     17522688
    physical write total multi block requests     69
    physical writes     2139
    physical writes direct     2139
    physical writes direct temporary tablespace     2139
    physical writes non checkpoint     2139
    recursive calls     19
    recursive cpu usage     1
    session cursor cache hits     1
    session logical reads     52162
    sorts (memory)     2
    sorts (rows)     760
    table scan blocks gotten     23856
    table scan rows gotten     2809607
    table scans (short tables)     1
    user I/O wait time     1
    user calls     11
    workarea executions - onepass     1
    workarea executions - optimal     9
    Second Query
    CPU used by this session     1197
    CPU used when call started     1197
    Cached Commit SCN referenced     21393
    DB time     1201
    OS Involuntary context switches     8684
    OS Page reclaims     21769
    OS System time used     14
    OS User time used     1183
    OS Voluntary context switches     50
    SQL*Net roundtrips to/from client     9
    bytes received via SQL*Net from client     767
    bytes sent via SQL*Net to client     15745
    calls to get snapshot scn: kcmgss     17
    consistent gets     23871
    consistent gets from cache     23871
    db block gets     16
    db block gets from cache     16
    enqueue releases     25
    enqueue requests     25
    enqueue waits     1
    execute count     2
    free buffer requested     1
    ges messages sent     1
    global enqueue get time     1
    global enqueue gets sync     25
    global enqueue releases     25
    no work - consistent read gets     23856
    opened cursors cumulative     2
    parse count (hard)     1
    parse count (total)     2
    parse time elapsed     1
    physical read IO requests     27
    physical read bytes     6635520
    physical read total IO requests     27
    physical read total bytes     6635520
    physical read total multi block requests     27
    physical reads     810
    physical reads direct     810
    physical reads direct temporary tablespace     810
    physical write IO requests     117
    physical write bytes     24584192
    physical write total IO requests     117
    physical write total bytes     24584192
    physical write total multi block requests     117
    physical writes     3001
    physical writes direct     3001
    physical writes direct temporary tablespace     3001
    physical writes non checkpoint     3001
    recursive calls     25
    session cursor cache hits     1
    session logical reads     23887
    sorts (disk)     1
    sorts (memory)     2
    sorts (rows)     2810365
    table scan blocks gotten     23856
    table scan rows gotten     2809607
    table scans (short tables)     1
    user I/O wait time     2
    user calls     11
    workarea executions - onepass     1
    workarea executions - optimal     5Thanks,
    Vijay
    Edited by: Vijayaraghavan Krishnan on Nov 28, 2012 11:17 AM
    Edited by: Vijayaraghavan Krishnan on Nov 28, 2012 11:19 AM

  • Best way to create machine-gun effect

    Whats the best way to do a freeze frame, and then have that frame flash like 5 times in 2 seconds before continuing on with the movie?

    Hi dmchord!
    IMO 2 seconds would be too long to achieve a staccato effect like you describe.
    2 seconds = 60 frames, or 12 frames per 'flash'.
    Each 'flash' should probably be about only 2 or 3 frames long, which is about 1/10th of a second each. Select your still frame and copy it, then clone as many copies as you need to make the sequence.
    If you just have them run one after another you will not see the 'machine-gun effect' you are after, they will just look like one long still, so you need to insert a contrasting break between each. You could create a still frame in black (or white, as long as it contrasts with the footage), and dice and slice that to pieces of 1-2 frames, and insert one between each frame of footage.
    Did that make sense?

  • I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

    I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    Several ways to get similar results.  Image > Adjustments > Posturize with low values similar to what you'd use n Cutout.  This is the most flexible way I can think of as you keep the image in RGB mode with layers intact.  A more radical approach would be to reduce bit depth using Indexed Colour.  You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color.  There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
    A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
    Now if only this forum could filter out bizarre content.

  • I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    Paragon even has non-destriuctive conversion utility if you do want to change drive.
    Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
    www.paragon-software.com
    Some general Apple Help www.apple.com/support/
    Also,
    Mac OS X Help
    http://www.apple.com/support/macbasics/
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725
    Apple Mac App Store
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
    How to Buy Mac OS X Mountain Lion/Lion
    http://www.apple.com/osx/how-to-upgrade/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    Mac OS X Community
    https://discussions.apple.com/community/mac_os

  • What is the best way to mimic the data from production to other server?

    Hi,
    here we user streams and advanced replication to send the data for 90% of tables from production to another production database server. if one goes down can use another one. is there any other best option rather using the streams and replication? we are having lot of problems with streams these days they keep break and get calls.
    I heard about data guard but dont know what is use of it? please advice the best way to replicate the data.
    Thanks a lot.....

    RAC, Data Guard. The first one is active-active, that is, you have two or more nodes accessing the same database on shared storage and you get both HA and load balancing. The second is active-passive (unless you're on 11.2 with Active Standby or Snapshot Standby), that is one database is primary and the other is standby, which you normally cannot query or modify, but to which you can quickly switch in case primary fails. There's also Logical Standby - it's based on Streams and generally looks like what you seem to be using now (sort of.) But it definitely has issues. You can also take a look at GoldenGate or SharePlex.

  • Best Way to port the data from one DB to another DB using Biztalk

    Hi,
    please suggest best way to move the data from one db to another DB using biztalk.
    Currently I am doing like that, for each transaction(getting from different source tables) through receive port, and do some mapping (some custom logic for data mapping), then insert to target normalized tables(multiple tables) and back to update the status
    of transaction in source table in sourceDB. It is processing one by one.
    How/best we we can do it using  bulk transfer and update the status. Since it has more than 10000 transaction per call.
    Thanks,
    Vinoth

    Hi Vinoth,
    For SQL Bulk inserts you can always use SQL Bulk Load
    adapter.
    http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalksyn/archive/2005/10/23/processing-a-large-flat-file-message-with-biztalk-and-the-sqlbulkinsert-adapter.aspx
    However, even though a SQL Bulk Load adapter can efficiently insert a large amount of data into SQL you are still stuck with the issues of transmitting the
    MessageBox database and the memory issues of dealing with really large messages.
    I would personally suggest you to use SSIS, as you have mentioned that records have to be processed in specific time of day as opposed to when the
    records are available.
    Please refer to this link to get more information about SSIS: http://msdn.microsoft.com/en-us/library/ms141026.aspx
    If you have any more questions related to SSIS, please ask it in
    SSIS 
    forum and you will get specific support.
    Rachit

  • I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. What is the best way to keep the files in these machines synchronized?

    I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. After a few days or weeks, I have new files on some folders on either of the machines that is not on the other machine. What is the best way to keep the files in these machines synchronized?

    How did you transfer the files to the iMac.  If you exported the files out of the MB library using Kind = Current you should get the edited version.  Any other  option may not.
    If you want to keep the two libraries "synced"  any photos you want to move to the iMac should be added to an album, connect the two Mac with a LAN, Target Disk Mode,  Transferring files between two computers using FireWire, with WiFi. and use the paid version of  iPhoto Library Manager to copy that album from the MB library to iMac library.  It will also copy the original and edited versions, keywords, titles, etc.
    OT

  • What is the best way to keep the battery built-in last longer?

    what is the best way to keep the battery built-in in macbook pro last longer???..
    is it by plugged in as many times as we can..and discharge it to 80-90% a week..then charged it back?

    My favorite tip for longer battery life: Uninstall Flash

  • Iphone 4s coming friday, what is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across.

    What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.

    First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
    Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
    Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
    Please tell me if you have any problems with backing up.
    Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
    Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
    Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
    Please tell me if you need any help.
    I hoped I answered your questions and solved your problem!

  • What is the best way to export the data out of BW into a flat file on the S

    Hi All,
    We are BW 7.01 (EHP 1, Service Pack Level 7).
    As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
    What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
    Thanks in advance,
    - Shashi

    Hello Shashi,
    some comments:
    1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
    2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
    3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
    For completeness, here's the most recent documentation which also lists other options:
    http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

    Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

    Much depends on the available connectivity  of your television.
    If it has HDMI input available, all you will need is a minidisplayport to HDMI adapter, and an HDMI cable long enough to place the Mac in the desired proximity to the TV. The adapter is avaialble from the Apple Store online.
    Provided the HDMI input on the television supports sound, and the model of your MBA supports it as well, make suree that your adapter is also supportive of sound, otherwise you will need to run separate cabling from the headphone jack of the MBA to TV sound input or external speakers.
    This is a somewhat specific answer to a question without any requisite detail. You don't indicate the model or type of inputs on your TV, nor do you indicate the model/generation of MBA you have.

Maybe you are looking for