Best way to split/merge Flash video programatically

Hello,
I have the following problem and I was wondering if anyone had a product that they could recommend. Also, if this post is better suited for another forum please let me know. Thanks.
I have several large .flv movies that contain multiple words. The starting and ending positions of the words are known from timing marks in the .flv file. I need to be able to split the .flv files at the specific timing marks and then merge the pieces together to form new .flv movies. I need to be able to do this programmatically through an SDK or something similar.
Thanks,
- Grant

http://www.macromedia.com/software/flash/flashpro/video/

Similar Messages

Whats the best way to export Quality flash video .flv?

Hi Everyone,
Whats the best way to export a very good quality video flash.
I tried several settings in the flash export in FCP, but it comes sort of dithered or slightly pixilated.
I see these great clear videos on the net and I wish I can export as good qiality.
I would really appreciate if some one gives me the right settings..
eg> size, bit rate and all..
Many thnx

http://www.macromedia.com/software/flash/flashpro/video/

What is the best way to create a flash banner that features video?

Hi I have created a html5 video banner but I also need to create a flash banner that will host a video in it
I have created the flash banner but not sure where to start in order to add video to it. I understand the best way is to host the video file on a server but how do I get that video to play within the banner?
Thanks

You can incorporate an FLVPlayback component that automatically loads the desired video. You could also make use of the NetStream class instead of having the component. Google either one to get information on using them.

Best way to split 3D project with constantly moving cameras

I created a 1 minute project in which the camera travels between 3 sets, while there is an animated 2D background. The background consists of overlaying .psd files which move around. The camera sweeps each set and then zooms to the next. Within each set are .mov and .psd files with tons of keyframing (although not too many filters). I think I'm starting to hit the outer limits of my hardware. I have it set to render draft quality for now, and it's still functional. I'm wondering what would be the best way to split it into smaller files, yet retain smooth motion of the camera between sets? I still need to fine tune the duration of each set, so I'm a little hesitant to break it up a this point, but may need to do so anyway. Thanks in advance.

Ok, I did it. Project complete. It turned out that I did have enough RAM, just not enough to RAM preview it all. I did flatten quite a bit of it prior to the camera moves. And an additional challenge was when I wanted to add a 5 second clip at the beginning. I wound up adding a second camera because all my timing was thrown off.
Anyway, here's a link to the final video.
http://www.youtube.com/watch?v=McBqVzrejNw
Hey Bogie, I was thinking of starting a separate thread in the FCP or Compressor forums with recommended encodes for getting this monster of a file on the web. I tried several iterations and finally found one that both looked good, was big enough to watch, and small enough to load quickly. Does it make sense to start a new thread for which I already have the answer?

What is the best way to create a Flash site

Hello Everyone,
I am realtively new to flash. I created the splash page of
our site in flash but 1st off it takes to long to load as it is.
But I would like to create the entire site in Flash. What is the
best way to create a Flash site, and are there tutorials out there
or any really good books, resources, or online classes to learn
Flash well. I understand the basic of flash and have created
banners, and other flash materials.
Can anyone help?

For me, as a noob, It's all about creative problem solving.
For lots of stuff, there's no right or wrong solution, but you have
to figure things out on your own. I, too, have built sites from the
ground up, and then rebuilt them even better. It's the only way to
really learn it well. Books, online forums, help docs all sort of
help, but it all comes down to how innovative you can be with
integrating them all into a site that is completely yours.
This might save you loads of headaches: avoid using scenes,
unless you are doing only animation. Keep each of your 'pages' on
their own keyframe, and use 'gotoAndStop' to navigate through them.
This is perhaps the easiest way to create a website quickly.
P

Best way to handle audio and video?

Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
Thanks for any help

Yes that should work for what you want.

Best way to split large partition in multiple small partitions

Looking for some ideas here. We ended up having a large/huge partition, the last one (because of maxvalue), while other partitions have similar number of records. What's the best way to split this large partitions with has about 3 years worth of data into separate partitions based on Month/Year. I tried with SPLIT partition, I not able to figure out a way to specify a value where I can like to split.
Any thoughts, ideas appreciated.
Thanks

I'd be inclined to split off that partition as a stand-alone table. Create new partitions and then reload the data. But that "inclined" would depend on the available maintenance window and the amount of data and the Oracle version number none of which you mention.

With supervised ipads, what is the best way to transfer photos and videos from the ipad to the PC? Wireless transfer is not an option in our circumstances

With supervised ipads, what is the best way to transfer photos and videos to the PC? Wireless transfer is not an option in our circumstances.

There are only two ways of transfering things on the iPad.
- via WiFi
- via usb cable
From what I have read, you need to connect to iTunes on the supervising PC.
Robert

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv? The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
Any help is greatly appreciated.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

What is the best way to edit/sync two video files?

Has anyone had experience with editing 2 movies files? I have recently taken video with 2 cameras of the same quality and am attempting to 'merge' the two video files. What's the best way to 'sync' the 2 files?
Thanks

The real answer is to do this in Final Cut Pro X with the new multicam feature with automatic syncing using the audio wave forms.
However, it is quite possible in iMovie.
Here is how I did it in iMovie.
I recently did this for a video of my niece's senior voice recital. (Video is below)
The key is to use the Cutaway feature of iMovie. If you are not familiar with Cutaway,here is a good tutorial from Ken Stone.
I used the side camera as my base clips, and used the back camera as the cutaway clips. The back camera audio track was OK but had too much coughing and noise.
Here are tips for getting it lined up perfectly.
1) In iMovie/Preferences make sure that you check "Display Time as hh:mm:ss:frames" so you can edit to the frame level. (Also, select "Show Advanced Tools so you get the Cutaway feature)
2) In the iMovie Project View, set the thumbnail slider to 1/2 second so you have a great deal of control.
3) Initially, leave the volume at 100% on the Cutaway track, so that both tracks are playing. You can hear when they are off.
4) Click the "Waveforms" button in the Project view, so you get a visual cue of how to line up the tracks.
5) Between the audible cues and the visual cues, you can nudge the cutaway back and forth one frame at a time by dragging until you have it perfect.
6) When it is lined up to your satisfaction, set the volume slider of the Cutaway track to zero, and turn off the waveforms. You can also move the thumbnail slider back to 5 seconds or so.
7) For some of the fine work, I switched to the "single row timeline view". This slows you down a bit, but lets you see the waveforms more clearly.
8) I made heavy use of the iMovie Comment Marker feature. I watched the whole base video/audio track and inserted comment markers at the points where I wanted the Cutaway to begin and end. For example, a comment might say "Insert Cutaway 1". I would usually time the cutaway so it started at a distinct audio event, such as when the piano start. This comment marker made it easy to drag my cutaway to a point that was approximately correct.
9) If you need to do a lot of cutaways, I find that it helps to use the SPLIT CLIP command in your project. This way you can have a single cutaway per clip, and this makes it easier to manage and is less processor and memory intensive for iMovie. I would use the comments to mark the entry and exit points of the cutaway as described above. I would then select that portion of the clip that included these markers plus a little more, so that a yellow border is around the selection. Then right-click/SPLIT CLIP (or CLIP/SPLIT CLIP in the top menu). This does not physically splt the clip within the Event. It only virtually splits the clip in the project.

What is the best way to send large, HD video files from the iPad?

Hello,
My department is looking to purchase between 50 and 150 new iPads. We hold conferences where participants take short, 3-minute videos of themselves in situations they have been trained for. The idea was that after they have taken the video, they could simply email these videos to themselves, negating the need to hook the device up to a computer, transfer the video over to a flash drive, and ensure that drive gets back to the right person.
Now that I have the first one, I'm finding any video longer than 45s or so can't be sent via email because it's too large.
Are you kidding?
The file I was just able to send was 7.5MB. That's the biggest video I can send from this thing? Why even give us the ability to take HD video if we can't *do* anything with it?
But, I digress.
What I'm looking for is the best way to get video off the iPads and into the hands of our participants. Are there apps on the App Store which might convert whatever video we take to an emailable size? I thought about setting everyone up with Apple IDs and having them use iMessage since there is no limit on file size, but of course you must own an Apple device in order to do that, and it still doesn't solve getting it on their computers.
Any help here would be greatly appreciated.
Thanks!
--Rob

You could try uploading them to a joint dropbox account that they could then download them from....but how fast it is will depend on the internet connection available.

What is the best way to compress longer HD videos for the web

I am struggling with the best way to post HD, as well as SD videos to the web - Vimeo as well as YouTube sites. Some of my files are up to an hour long, and above.
I've tried mp4, H.264 compression, multi-pass, as well as ProRes in various settings. The files are either too small or too large. I have an stand-alone Flash encoder, but it seems to take an inordinate amount of time.
My computer only has a Duo Core - its the first Intel processor. Is it too slow to process these large Video files?
ANY advice would be greatly appreciated. Thanks in advance.
Peter

as well as YouTube sites. Some of my files are up to an hour long, and above.
There are quite a few videos on YouTube that are up to 3 hours long. If you are having issues uploading long YouTube movies, have you contacted their tech support?
(10.6.3)
Use Software Update to update your os and anything else that needs to be updated.

Best way to split a single string containing 2 words into word1 and word2

Whats the best way to take a string containing 2 words and split it into 2 strings ?
eg. "red ferrari"
string1 "red"
string2 "ferrari"

If your list is always going to have exactly two words, then yes. Otherwise it depends on your requierments.

Best way to adjust lighting in video clips

Is there a "best" way to adjust lighting conditions within a video clip? I have a clip with terrible lighting conditions and cannot reshoot the scenario.
While I don't expect a perfect solution, I am hoping that there are better approaches than the ones I've been using. If recommendations include third-party plugins, I would appreciate hearing about them, as well.
I have been using the gamma corrector and luma corrector filters. The gamma corrector adjustments in greater values, but seems to only work in discrete steps. So, if the gamma needs to be stepped up or down within a clip, there is a very visible and sometimes jarring visual effect. The luma corrector seems to only be able to increase the brightness level (through a combination of all 5 or 6 variables including brightness, gain, gamma, etc.) before the clip looks washed out.
Thanks,
Steve

All CC and Grading should start with "Levels"
You could then go into 3-Way Color Correction.
You could also look at a more powerful CC such as Colorista 2

Best way to handle large number video files for a project..

Hey, I was looking at getting some insight from the community here. Bascially there is a project that is being worked on that requires large amount of footage to be sifted through that only a small percentage will be used. These are mostly HD files and while most of the footage has been watched on Quicktime with notes taken, my question is this.
What is the best way to take only small portions of each file without having to load everything into final cut and without any loose of quality. Should I just trim and rename from Quicktime or is there an easier way?
Reason this needs to be done this way is the smaller segments will each be sent to other editors and rather then send huge files we want to split it to smaller amounts for each editor to use.
Thank you so much for any input regarding this, I look forward to what you have to say

Open the clip into the viewer. Mark In and Out points on the section you want. Make it a subclip Cmd-U. Drag the subclip into the bin for the editor who needs it. Repeat.
If you batch export from a clip there is a selection to choose whether to export the whole clip or check box to export the marked I/O.
This does not sound like a good project on which to being learning FCP.

Best way to split/merge Flash video programatically

Similar Messages

Maybe you are looking for