Beta 3 - mx.core.FlexVersion missing?

whoops, never mind, when I re-created the project it reverted
to using the server sdk as the compiler. all's well.

hi Srinivas,
Acually whenever i roll over the mouse on the column headers
of the Advanced Data Grid it hangs and throw this error.i am
getting a grouped data from data base and using the group
collection as data provider which has source property bound to
ArrayCollection.The problem comes only whenever we take the mouse
over the column headers it throws this error and hangs.
<mx:AdvancedDataGrid id="adg1" width="100%" height="100%"
wordWrap="true" >
<mx:dataProvider>
<mx:GroupingCollection id="gc" source="{this.ABC}"
><!--ABC is ArrayCollection-->
<mx:Grouping>
<mx:GroupingField name="GroupingField"/>
</mx:Grouping>
</mx:GroupingCollection>
</mx:dataProvider>
<mx:columns>
<mx:AdvancedDataGridColumn dataField="Field1"
headerText="Field1" />
<mx:AdvancedDataGridColumn dataField="Field2"
headerText="Field2" sortable="true" />
<mx:AdvancedDataGridColumn dataField="Field3"
headerText="Field3" />
</mx:columns>
</mx:AdvancedDataGrid>
If move the mouse over the column headers the error is thrown
and the application hangs and the same code works fine with the
beta 2.
Thanks....

Similar Messages

  • SDM Deployment fails - Dependency caf/core/ear missing

    crosspost from: SDM Deployment fails - Dependency caf/core/ear missing
    deploying a DC from NWDS into SDM the following Exception is thrown:
    07.01.2008 16:20:38 /userOut/daView_category (eclipse.UserOutLocation) [ThreadDeploy Thread,5,main] INFO:
    002Additional log information about the deployment
    <!LOGHEADERSTART/>
    <!HELPManual modification of the header may cause parsing problem!/>
    <!LOGGINGVERSIONhttp://1.5.3.7185 - 630/>
    <!NAME[/usr/sap/IT1/DVEBMGS00/SDM/program/log/sdmcl20080107151422.log]/>
    <!PATTERNhttp://sdmcl20080107151422.log/>
    <!FORMATTERcom.sap.tc.logging.TraceFormatter(%24d %s: %m)/>
    <!ENCODINGUTF8/>
    <!LOGHEADEREND/>
    Jan 7, 2008 4:14:22 PM Info:
    Starting deployment
    Jan 7, 2008 4:14:22 PM Info: Error handling strategy: OnErrorStop
    Jan 7, 2008 4:14:22 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
    Jan 7, 2008 4:14:22 PM Info: Update strategy: UpdateAllVersions
    Jan 7, 2008 4:14:22 PM Info: Starting deployment prerequisites:
    Jan 7, 2008 4:14:23 PM Info: Loading selected archives...
    Jan 7, 2008 4:14:23 PM Info: Loading archive '/usr/sap/IT1/DVEBMGS00/SDM/program/temp/temp23425innobis.dewkbtmetadata.ear'
    Jan 7, 2008 4:14:24 PM Info: Loading archive '/usr/sap/IT1/DVEBMGS00/SDM/program/temp/temp23426innobis.dewkbtear.ear'
    Jan 7, 2008 4:14:24 PM Info: Loading archive '/usr/sap/IT1/DVEBMGS00/SDM/program/temp/temp23427innobis.dewkbtdictionary.sda'
    Jan 7, 2008 4:14:25 PM Info: Loading archive '/usr/sap/IT1/DVEBMGS00/SDM/program/temp/temp23428innobis.dewkbtpermissions.ear'
    Jan 7, 2008 4:14:26 PM Info: Selected archives successfully loaded.
    Jan 7, 2008 4:14:26 PM Error: Unresolved dependencies found for the following SDAs:
    1.: development component 'wkbt/ear'/'innobis.de'/'NetWeaver Developer Studio'/'20080107144202'/'0'
    dependency:
    name: 'caf/core/ear'
    vendor: 'sap.com'
    There is no component either in SDM repository or in Deployment batch that resolves the dependency.
    Deployment will be aborted.
    Jan 7, 2008 4:14:26 PM Error: Prerequisites were aborted.
    Jan 7, 2008 4:14:27 PM Error: Error while creating deployment actions.
    system:
    sap.com/SAP-JEECOR 7.00 SP10 (1000.7.00.10.0.20061026144500)
    sap.com/SAP-JEE 7.00 SP10 (1000.7.00.10.0.20061026144500)
    I checked http://<srv>/sap/monitoring/ComponentInfo
    the missing 'caf/core/ear' is not listed, however several other CAFs are:
    sap.com caf/core null (964250) SAP AG MAIN_APL70VAL_C 20061212133926 sap.com/CAF
    sap.com caf/core/dict null (964586) SAP AG MAIN_APL70VAL_C 20061212131613 sap.com/CAF
    sap.com caf/core/gp/facade/backgroundco/ear null (964227) SAP AG MAIN_APL70VAL_C 20061212134201 sap.com/CAF
    sap.com caf/core/metadata null (963689) SAP AG MAIN_APL70VAL_C 20061212133653 sap.com/CAF
    etc....
    Is it possible to deploy this missing caf-ear component supplementary?
    I have the strange feelings caf/core/ear is something 7.1 CE only related....
    thanks for any hint!
    kai

    Kai, I didn't mean to offend you. But good forum practice is to avoid duplicate posts.
    Regards,
    \-- Vladimir

  • Com.sap.pct.srm.core configuration missing in Portal for SRM

    Hi,
    We have installed a new portal 7.0 ehp1.
    Installed the SRM business package.
    configured all the roles.
    Configured UWL
    But in Universal workflow configuration content , com.sap.pct.srm.core is missing.
    In our development system , it was already present. Not sure why in the new system it is missing.
    Can we download from the development system and upload it in the new system.
    Thanks,
    Tanuj

    That should have been installed when you install the corresponding BP for SRM.
    To answer your question - yes you can download it from your DEV system and upload it into your QA system.
    Thanks,
    Shanti

  • Are the i5/i7 processors way better than the Core 2 Duo?

    Currently travel with my MacBook, but it's heavy (Pro stays home).  I'm considering replacing the MB with an Air with 4GB RAM/256GB HD and I'm looking at refurbs.  Go with the new i5 or i7 or is the Core 2 close enough?  Thanks.

    Another part of my thought process is that it's probably better to buy the most recent hardware when one is spending this much as Apple does sometimes stop support for older products.
    Apple will offer hardware support options either through them or an authorized reseller for 5-years after the machine is discontinued, it is 7-years in the state of California. From a software perspective, Apple will usually continue to offer security updates for an OS until it becomes the 2nd oldest in generation.
    So for example, now we're on Lion, Leopard will fall off the radar.

  • CRVS2010 Beta - Export rpt file with missing parameter

    Hello,
    for my application I have some parameters that I use to filter my data. The thing is, some of these parameters I want to define in my application but others I want to be inputed by the user every time he loads the report.
    For this I just didn't assign values for these parameters, but when I try to export the report to rpt format I get an exception of missing parameters.
    If I try the same using the Save method, when I load the report it asks me for all the parameter values, including the ones I assigned before.
    Can someone tell me if it is possible to do this thing (leave some blank parameters to be assigned at load time)?
    Thank you very much
    Modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
    Edited by: Ludek Uher on Jul 19, 2010 8:02 AM

    Hello,
    Try creating the sample application with fewer parameters in the report.
    While passing the parameter values from code use :
    crReportDocument.SetParameterValue("ParameterName", "Value");
    Sample applications are available here:
    [https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDKSamples|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDKSamples]
    Hope it helps!
    Thanks,
    Bhushan.

  • Problems installing Java EE5 Beta on Fedora Core 5 x86_64

    Everytime I try to install teh beta download I get an error message about a bad "ELF" format in stdlibc++.so.5. Is there a 64 bit compatible beta download of the Java EE 5 platform for Linux?

    Everytime I try to install teh beta download I get an error message about a bad "ELF" format in stdlibc++.so.5. Is there a 64 bit compatible beta download of the Java EE 5 platform for Linux?

  • AIR 3.4 SDK Beta with iOS6 Support is missing BETA 2 update

    We are trying to get our application that uses native extensions working with iO6 and AIR 3.4.  I can see from the website that there was an update on August 7th, and the top links show that update in the link date:
    Ie: http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/air3-4/air3-4_p2_sdk_mac_080712.tbz2
    However the links under “AIR 3.4 SDK Beta with iOS6 Support”, have  not been updated.  (And that is oviously the build we are most interested in)
    http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/air3-4/air3-4_p1_sdk_ios6_mac _071612.tbz2

    So I found the problem.   I had installed beta 1 in a folder called AIR 3.4     ...   I installed beta 2 in a folder called  AIR 3.4 Beta2      
    I did however point Flash CS6 to use the AIR 3.4 Beta2 SDK ...    it must not like something about this.   Once I deleted both SDK's and then put Beta 2 in a folder simply titled AIR 3.4 everything works again.

  • Core Apps Missing 9720

    I'd like to install Russian language on my sim free Blackberry 9720 bought in UK (Carphone Warehouse). According to instructions I'm trying to find core apps in Blackberry Desktop software but there are no core apps. After searching on forums I tried to install 9720 software on my PC but only O2 version is available and there are still no core apps. Also I tried to launch Blackberry Desktop Software with administrative rights but nothing changes. How can I install Russian language on my 9720?
    I have two PCs: Win 7,Office 10 and Win 8, Office 10 
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    The simplest way is to, on a PC (you cannot do this on MAC):
    1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
    2) Uninstall, from your PC, any BB OS packages
    3) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    4) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    Use this KB to guide you to choosing the proper OS package (which can be from any carrier):
    KB05305 Localization support for BlackBerry smartphones
    5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
    6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
    If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • CS6 BETA - Brush Tip Size Circle Missing

    Hi all, for some random unknown reason the circular brush size tip has vanished for all brushes and tools.  Only a small cross-hair remains.  Any suggestions?  Its a real pain trying to size a brush without this!

    Turn off caps lock. That's the not-very-well-known toggle for the 'precision' cursor mode.

  • Publish app in Beta 1 & Beta 2, contain missing images

    I have noticed that when I publish a siena project in Beta 1 and now Beta 2, there seems to be missing images within the published folders.
    This results in having to publish several times and validate that all images have been downloaded to the publish package.
    I have over 400 images within several folders.  I know that all image paths are correct as all show up in preview mode within siena.  I have also validated each and every image in all folders, so I know the exact number that should
    be in my publish package.
    What I have found if an app contains many images, one has to ensure that all images are viewed (selected) within the app.  I cannot just open the app that published correctly one day and make a small cosmetic change and then publish the app again
    without validating that all images get published.
    A good example is that I opened a siena project that i published and after several attempts the package contained all images (over 400+).  I then opened the same siena project and saved it with a new name, added a rating control and timer
    for animation.  Please note that no other changes were made.  I then published the package several times before I was successful in getting all images added to the published package.
    I see the same issue in Beta 2.
    William

    Robin,
    Sorry for the confusion.  The embedded media is not the issue here.  I have an excel data source that contains the links to the images.  I can see the images within the project, data source, links are loaded into the collections, and all images
    can be viewed within the project.
    The issue occurs during the publishing phase.  During publishing all the images should be downloaded into the publish package but they are not.  I just opened the same project and published in Beta 2.  I wanted to test this issue
    in beta 2.  I was missing over 40 files from the 400+. 
    Please note I did not close and reopen siena.  The next step is that I went into preview mode within the same project, viewed each image from each gallery, then published.  I then validated the published package subfolder and all 400+ images
    were there.
    Hope this it a little bit clearer.
    William

  • How do you spread CPU load over more cores?

    Hi
    I recently bought a macbook pro quadcore i7 because my 2007 macbook couldn't cope with the demands of Logic when using it rewired with Ableton Live, and had lots of CPU overload messages.
    I am really disappointed that having spent so much money to overcome this problem, it has only slightly improved the amount of overload messages. I read the article below about how to spread CPU power over the cores, now I have 8. I still can't figure out though how to control which channels are using which core and spreading the CPU load to cores 5-8 which don't seem to be being used. Any ideas?
    Can I rewire from ableton to different cores?
    In my project, the 2nd core keeps overloading whilst the others are down. Is it to do with aux channels, master channels, buses etc?
    Or should I upload my memory to 8GB RAM?
    Thanks
    Steve
    Here's the article:
    About core activity
    Logic breaks tasks down into threads that can be assigned to a single core for execution. It's not possible to split a single thread across multiple cores, although a single core may run multiple threads at the same time. This is one reason that you may sometimes see uneven load distributions across the available cores on your computer. If one thread is very processor-intensive, the core running that thread may show much more activity than the cores running less demanding tasks. This is the main reason that you may get "Core Audio Overload" warning messages even though some of the cores on your system may not show significant activity.
    To monitor Logic as it uses the cores on your system, double-click the CPU meter in the Transport area.
    A window displays a meter for each core.
    The same concept applies to channel strips as well. Each channel strip—and all plug-ins it contains—is processed by one core. If you are using many processor-intensive plug-ins on a single channel strip, the core running it may show heavier activity. This is especially true if you are working at high sample rates (88.2 kHz or higher).
    Redistributing core loads
    If you find that a single core has much higher activity, use these strategies to redistribute the load.
    In the example below, there is a single Software Instrument channel strip with plug-ins routed directly to Output 1-2. The channel strip for Output 1-2 has a large number of plug-ins.
    In this example there is activity on two cores:  the left core is handling the Software Instrument while the next core processes the Output 1-2 channel strip. You can use routing capabilities in Logic to distribute the load to more cores without changing the sound, as in the next image.
    The resulting signal chain is Inst 1 > Aux 1 > Aux 2 > Out 1-2, as shown in this table:
    Channel strip
    Input
    Output
    Inst 1
    Bus 1
    Aux 1
    Bus 1
    Bus 2
    Aux 2
    Bus 2
    Out 1-2
    Also, the first four plug-ins have moved from Output 1-2 to Aux 1 and the remaining four plug-ins to Aux 2.
    After adjusting the volumes to the respective channel strips appropriately, the result sounds identical, but now the load is distributed among four cores instead of two. You can use this concept to redistribute plug-ins from Audio channel strips, Software Instruments, Auxes, and Outputs (as in this example).
    In the image above, there is still a very heavy load on a single core, even though it's using the routing described above. Notice the Inst 1 channel strip is selected. When a Software Instrument track is selected in the Arrange window, Logic enters "Live Input Mode". In this mode, Logic turns on every plug-in in the channel strip's signal path so the channel strip can be played live from a MIDI controller. All of this must be handled by a single thread and therefore just one core. It's a good idea to keep a track that uses an Audio channel strip selected in the Arrange window, unless you're actively playing or recording to a Software Instrument.

    OS X Snow Leopard introduced Grand Central, where the OS will distribute the load better to more cores, however it takes time for software to adapt to these changes and make a rewrite of the codebase and test it out, Apple's included.

  • Missing Connection Types in Report Data Source Properties

    I am running three installations of SharePoint 2013 with SQL 2012 for Business Intelligence, with Kerberos working.
    I have been having intermittent issues with SQL Reporting Services in a multi-server configuration, but finally had it working in all three environments.  We discovered many of our issues were caused by master page customizations which we have now disabled
    temporarily while we work on function issues.
    However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened.  Most everything appears to still be working, except Reporting Services. I have verified that features are enabled
    in both the farm and the site collection, as well as insured managed content types are being allowed on the target document libraries.  I also verified the Reporting Service properties and database connections.  However, I have found two clear symptoms
    which I can find no other information regarding (in logs or in online searches):
    1) If we try to create a new "Report Data Source" using the SharePoint UI, it will open a new Data Source Properties window, but in the "Data Source Type" field, there are no values available for me to select my connection type (e.g.,
    Microsoft SQL Server).
    2) In Central Administration, while administering the Reporting Services Service Application, I can manage a majority of the settings, including System Settings, Manage Jobs, Key Management, etc.  However, if I click on the link for "E-mail Settings,"
    I get the dreaded "Sorry Something went wrong screen," with an error saying that "Object reference is not set to an instance of an object."
    So I am hoping someone has an idea of where I can look for additional information on this issue, or even better, knows what I am missing to get Reporting Services functional again in this environment!
    Thanks in advance for any help provided.
    Elohir

    However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened.
    Hi Elohir,
    I assume you are installing Reporting Services SharePoint mode for SharePoint 2013, you need to:
    1. Install "Reporting Services – SharePoint" and "Reporting Services add-in for SharePoint Products" on the SharePoint server that the SSRS service will run on.  All other SP servers only need the "Reporting Services
    add-in for SharePoint Products."   
    2. Run the Insall-SPRSService and Install-SPRSServiceProxy on Central Admin and SSRS server.
    3. Start SSRS Service only on desired SSRS servers.
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    Since the issue occurs only to one of the environments, please provide more information about your multi-server configuration, and point out the server where the issue occurs.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • How do I find the number of physical CPUs , number of cores in OEL ?

    In RHEL , it is easy to find the number of Physical CPUs and the number of cores within each CPU
    -- Ouput from Red Hat Enterprise Linux 5.4
    -- This a real machine. Not a VM
    $ cat /proc/cpuinfo
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 46
    model name      : Intel(R) Xeon(R) CPU           X7550  @ 2.00GHz
    stepping        : 6
    cpu MHz         : 1995.048
    cache size      : 18432 KB
    physical id     : 0              --------------> This will give info on the physical CPU
    siblings        : 8
    core id         : 0
    cpu cores       : 8              --------------> This will give the number of cores within a CPU
    apicid          : 0
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 11
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm
    bogomips        : 3990.09
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 44 bits physical, 48 bits virtual
    power management: [8]Output from Oracle Linux . Physical CPU Id and Number of Cores info is missing.
    -- Output from Oracle Enterprise Linux 6.3
    -- This is a virtual machine created using Virtual Box
    -- Processor ID , number of cores is missing
    $ cat /proc/cpuinfo
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 42
    model name      : Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
    stepping        : 7
    cpu MHz         : 2298.627
    cache size      : 6144 KB
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 5
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp lm constant_tsc up rep_good nopl pni monitor ssse3 lahf_lm
    bogomips        : 4597.25
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 36 bits physical, 48 bits virtual
    power management:Is this the expected output in Oracle Enterprise Linux ? If so, how can I find the number of Physical CPUs and the number of cores within a Physical CPU in OEL?
    Is this info missing because I am running OEL in a virtual machine ?

    Oracle Linux behaves exactly like Red Hat in this matter an /proc/cpuinfo can be used for that. I guess this is because you have set up VirtualBox to only assign one virtual CPU to your guest Linux.
    processor     : 0
    vendor_id     : AuthenticAMD
    cpu family     : 15
    model          : 33
    model name     : Dual Core AMD Opteron(tm) Processor 275
    stepping     : 2
    cpu MHz          : 1000.000
    cache size     : 1024 KB
    physical id     : 0
    siblings     : 2
    core id          : 0
    cpu cores     : 2
    apicid          : 0
    initial apicid     : 0
    fpu          : yes
    fpu_exception     : yes
    cpuid level     : 1
    wp          : yes
    flags          : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good extd_apicid pni lahf_lm cmp_legacy
    bogomips     : 1994.47
    TLB size     : 1024 4K pages
    clflush size     : 64
    cache_alignment     : 64
    address sizes     : 40 bits physical, 48 bits virtual
    power management: ts fid vid ttpAnother example is this one, OEL 5.6 inside of VirtualBox but with 2 virtual CPUs assigned:
    [root@oel56proxy ~]# cat /proc/cpuinfo
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 23
    model name      : Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz
    stepping        : 10
    cpu MHz         : 2064.652
    cache size      : 6144 KB
    physical id     : 0
    siblings        : 2
    core id         : 0
    cpu cores       : 2
    apicid          : 0
    fdiv_bug        : no
    hlt_bug         : no
    f00f_bug        : no
    coma_bug        : no
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 5
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
    bogomips        : 4129.30
    processor       : 1
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 23
    model name      : Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz
    stepping        : 10
    cpu MHz         : 2064.652
    cache size      : 6144 KB
    physical id     : 0
    siblings        : 2
    core id         : 1
    cpu cores       : 2
    apicid          : 1
    fdiv_bug        : no
    hlt_bug         : no
    f00f_bug        : no
    coma_bug        : no
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 5
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
    bogomips        : 7494.15I have not tried to replicate this with a VM that only has one vCPU assigned but I guess that is why you only see one CPU and no processor_id and so on.
    Bjoern

  • Status bar missing. How do you know if a site is secure without the status bar?

    Found the status bar at bottom of page very useful. Its now missing. How can I tell the downloading progress and more importantly if a page is a secure site? Live in a rural area with slow internet service and both download speed and security is very important to me. Security is VERY important, as do a lot of banking and bill paying on line. Saw someplace in questions and answers that the "Status Bar" was dropped in version 4. It was working for me up through 4.0 Beta 4, but not in Beta 7. If I missed the news please let me know and also how do I tell if on a "secure" page now? Is there an "add on" that will give me the "Status Bar" back?

    I have the same issue, i miss the fact that i cant watch my downloads in the status bar. as for the secure lock symbol, i found once i visit a secure site e.g HSBC website. a big green bar appears in the URL. any news post back.
    cheers
    Will

  • Is it possible to install CS5 or CS5.5 on a 2.4 GHz Intel Core 2 Duo 4 GB 667 Mhz DDR2 SDRAM MacBook

    Is it possible to install CS5 or CS5.5 on a 2.4 GHz Intel Core 2 Duo 4 GB 667 Mhz DDR2 SDRAM MacBook Pro running 10.6 (Snow Leopard)?
    Before posting my question I checked system/hardware requirements for Creative Suite, both on Apple and Adobe's websites. But I am however confused about the difference between "Multicore Intel processor" vs "Core 2 Duo", and keep hearing stories about CS5 not working properly in similar situations due to hardware issues.

    Hi LMDV,
    Welcome to the community!
    Multicore Intel processor also known as Dual core processor is required to run the CS5 or CS5.5, you have Core 2 Duo which is better then Dual core and sufficient to run the CS5 and CS5.5 apps. You just need to check other system requirements which is mentioned here:
    http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection5/systemreqs .html
    Thanks!
    Ankit

Maybe you are looking for

  • How do I set up an account to receive email from my SMTP relay Server. Have I made a SMTP Server config error?

    Hi, How do I set up an account to receive email from my SMTP Relay Server? I've setup the SMTP feature and set my Server to use anonymous authentication. Things appear to look ok. But I can't connect make a test connection to it when I am trying to a

  • How to control the cursor position on a text item..

    Hello, How can we control the cursor position programmatically on a text item. i.e. how do we move the cursor to home or end of the text item. TIA, Hiten

  • Writting Events for TableView Buttons

    Hi SDN, I created a table view in a jsp dynpage which has one of the columns type as button.i got it by using "setColumnType" attribute of tableview. now i want to fire server and client events onclick of those buttons.how to achieve it? can we write

  • Search entire library for specific keywords?

    Maybe I'm missing something, but I can't seem to find a way to search my entire Aperture 3 library for specific keywords.  It seems that I have to first select a project or album within the "Projects and Albums" section.  If there is indeeed no way t

  • RXMap field from collectors

    Hi, I am trying to understand better how RXMap field works in terms of structure. It seems a field or structured variable which keeps other fields which are usually parsed from event sources data. Well, that is my understand. I have tried to search i