Beta Firmware 2.0.0.7-K9 WRVS4400Nv2 dual-band?

I thing that fw 2.0.0.7-k9 is quite good and is much much better than 1.0.0.9 (witch was useless). I don't have problem with router since I upgraded fw. What I'm really looking for is that new fw would have dual-band 2.4 and 5 GHz. I heard that radio in this router can handle both freq. - is it true?

Good Morning,
At this time we will pass you request up the ladder to the engineers, we are not working on any updates for the firmware for this device.
Please monitor the boards and firmware upgrades for any future changes.
have a good day :)

Similar Messages

What happened to the Beta firmware downloa

The U.S. Creative support site used to have beta firmwares for download months in advance back when NOMAD Jukebox , 2 & 3 were the newest players, but then they disappeared, howcome?

Actually they only had beta firmware for the NJB, and the NJB firmware is not being developed any more.

WRV200 New Beta firmware(1.0.24)

To:ALL
Below is a link for a new beta firmware for the WRV200 (1.0.24) Hope this helps out.
ftp://ftp.linksys.com/pub/network/
Thanks.

Ah OK, thanks for the info

RV220W Beta Firmware 1.0.4.17

Is anyone else using the Beta firmware?
There are some improvements.
One can now view alerts and notifications within the software.
Also it appears as if the Protect Link Block Page was reworked to allow direct acces to Trand Micro Website for checking out Blocked URLS.
I also think CPU and memory usage is much improved.
Small Business Support can provide the firmware.

I agree with the thought of Cisco needing to take the SMB market seriously.
I suppose some of the issue, like you alluded to is the division of the products between
Enterprise, Enterprise for Small Business, & Small Business.
Enterprise Grade products are Configurable,Complex & not Plug & Play. Their small business counterparts on the contrary need to be easy to use & easy to setup, but instead they retain some of the complexity of their big brothers.
I was advised to buy an SA520, but chose the RV220W because of price.
That said I do like my RV220W over the Sonic Wall TZ100. As far as ZYXEL their product lijne is somewhat limited.
With Cisco I know they have a full line-up of compatible products for the majority of my needs.The products are well built & generally work well with one another.
I do really like the QOS per VLAN on the RV220W as well as the Protect Link Filter. Also the SSL VPN Portal is a really neat idea -it just doesn't work in Windows 7.
Hopefully we see some of the issues addressed in the next firmware update like slow DHCP assignment, lack of clear logs for Protect Link, & an Easy VPN setup wizard. Actually setup Wizards for everything would be great.
Feature Requests:
Port Forwarding Wizard
Protect Link Wizard
VPN Setup Wizard
QOS Setup Wizard (with AUTO VOIP setting?)
Live logs from all systems including Protect Link.
IPS (in a simplified form)
Connect Protect link & Firwall Conten Filtering.
Allow SSLVPN Portal to work with Windows 7, Windows 8, IE9, Firefox, & Chrome.

How can i Downgrade from iOS 6 beta Firmware to iOS 5.1.1 iPhone 4 A4 . After I've upgraded my machine batteries run out very quickly, so I want to Downgrade, I don't have shsh blobs

How can i Downgrade from iOS 6 beta Firmware to iOS 5.1.1 iPhone 4 A4 . After I've upgraded my machine batteries run out very quickly, so I want to Downgrade, I don't have shsh blobs

There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released. Or were you simply trying to be funny?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Nokia Beta Firmware! (Treat Customers Fairly)

Nokia released v20.115 for the Nokia N86 8MP. How on earth did this get past testing? The main animation dont work the phone along with other firmware. Nokia should have warned users before updating its a BETA firmware continue at your own risk. Don't know what they been taking while writing up firmware code for the N86.
For future firmware release I would like Nokia to inform users that whether firmware is BETA or not. Customers should not be used as guinea pigs for testing new firmware unless they actually sign up to a BETA programme from Nokia. This is not fair to the customers.
I was wondering if the mods can pass this to the relevant firmware tea. In future the firmware team should do more testing before releasing and mention on FOTA or NSU that its a BETA firmware or not.
The Nokia N86 v20.115 is a BETA firmware from Nokia !
What are your opinions on this?
If you find my post useful then click on
Kudos!Nokia N86 8MP (v20.115 / RM-484)
Symbian-Master

You should count yourself lucky, the N97 hasn't had a production level firmware release to date!
V10 constantly crashed, V11 worked but was full of stupid bugs that even basic testing (i.e. use the phone for a day) would have found, and V12 fixed very few of these and screwed up loads of existing wireless connection configurations requiring some rather involved backup/reset procedures to get things to work again.
I don't know what has happened to Nokia's quality control in the past few years. It seems that now because people can perform firmware updates at home they think this is a valid excuse to issue "it compiles, ship it!" firmware.

Announcement: New beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma - 21st Jan 2011

Hi all,
There are new beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma. For those who are experiencing low volume with the microphone, download the corresponding beta to see if it hel
ps.
For Windows:
Beta firmware for Sound Blaster Tactic3D Alpha
Beta firmware for Sound Blaster Tactic3D Sigma
For Macintosh:
Beta firmware for Sound Blaster Tactic3D Alpha
Beta firmware for Sound Blaster Tactic3D Sigma

Hi,
I confirm that the two files SBTA_PCFW_BETA_US_D0_0_2.exe and SBTS_PCFW_BETA_US_D0_0_2.exe are corrupted (not Win32 applications). The downloads do not complete and stop respecti'vely at .36 KB and 05 KB.
Creative, you have to reupload the files on your webserver.
Download done with XP and IE8.
Bye.

Firmware Version: 7.00.3 (BETA FIRMWARE)

Maybe this will help those of you with version 7
Firmware Date: December 4, 2006
Release Date: December 21, 2006
General Notes:
- This firmware is currently in BETA and will be dealt with at such with limited technical support.
- This firmware is NOT backwards compatible with hardware versions prior to 7.0
- This firmware is only for usage in EMEA (Europe, Middle East, and Africa) and APAC (Asia-Pacific).
- Disconnect all wireless clients from the router during the upgrade process. Make sure no wireless clients attempt to associate with the router until the upgrade process is complete.
- After upgrading to this firmware, Setup Wizard ver. 7 (shipped with the product) can configure the router, but is no longer able to change the language on the web-based/GUI on the router.
- Channels 12 and 13 are not functional in this version of the firmware.
Firmware 7.00.3 BETA FIRMWARE
- Resolves interoperability issue with WAP54G and WRE54G in WPA-PSK mode.
- Resolves intermittent reboot issue when BitTorrent is running when UPnP is enabled on the router.
- Resolves wireless data rate performance issues.
- Resolves issue with router assigns declined IP address to LAN host.
- Resolves issue with QoS module algorithm.
- Resolves reboot issue if fragmentation threshold is set to value less than 1500.
- Resolves issue with wireless MAC filtering configuration GUI.
- Resolves issue with saving RADIUS passphrase.
- Resolves display problems in routing policy configuration GUI.
- Resolves issue of RIP request packets not being sent out after switching to router mode.
- Resolves issue of logging the same event more than once when log function is enabled.
- Resolves issue of unexpected clearing of log when user stops and closes traceroute.
- Resolves issue of not being able to accessing some configuration settings after changing password.
- Resolves issues with incorrect beacon interval acceptable range and beacon packets not being sent out on some particular settings.
- Corrects "Port Range Forward" policies validation.
- Fixes problem of not storing DNS address(es) correctly if static DNS address(es) is/are used.
- For security purpose, "Clone Your PC's MAC" functionality is no longer available if user accesses router remotely.
- Resolves issue of displaying incorrect HTTPS certificate message.
- Fixes problem in QoS configuration validation.
- Fixes incorrect supported rates in beacon packets when wireless mode is set to 'mixed'.
- Resolves reboot issue with setting beacon interval to value greater than 5000.
- Corrects ARP exchange behavior on WAN interface (DHCP mode) after obtaining IP address via DHCP.
- Corrects PPTP connection behavior when PPTP mode is set to "on-demand" mode.
- Resolved issue with not being able to set UPnP policy with port number less than 1024.
- Fixes problem of DMZ feature not functioning properly.
- Resolves issue with not showing the most up-to-date connection status on WAN interface in MS Windows XP via UPnP.
- Resolves issue with LAN host intermittently not being able to obtain IP address from router via DHCP when DHCP server is enabled.
- Resolves issue with IP address assignment via DHCP on some particular devices.
- Corrects DHCP protocol stack behavior when switching from PPPoE mode to DHCP mode.
- Corrects "Access Restriction" behavior when system time is not available.
- Resolves issue of not trying alternative DNS if the preferred DNS does not respond.
Firmware 7.00.1
- Initial Release
http://www-uk.linksys.com/servlet/Sa...VisitorWrapper

I've updated my WRT54G V7 with this firmware and many things are indeed fixed. The range of the wireless signal increased drasticly (from very low to very good). Since the upgrade I haven't need to reboot the router. I hope this will keep working and keep my fingers crossed...
Thanx for the post wehowardjr
Johnson

Where can I download 7.4.2 firmware for my Simultaneous Dual Band II AE

After upgraded to the latest firmware, the time machine disconnect randomly, so does my NAS' file shareing.
As other topic says, I want to downgrade my AE to 7.4.2. I remember days before upgrading firmware, everything's well.
I can't find any download for my Simultaneous Dual Band II AE, only Simultaneous Dual Band (no II). Can someone tell me where I can download it?
Thanks.

Michael,
This may or may not help.... But it just might get someone to either tell us I'm right or point us in a better direction....
I have one AE and three AX's. All recent "n" models. My AE was using v7.5.1 and the three AX's were on v7.4.2. My version of AirPort Utility is v5.5.2. All was well WiFi land....
I recently updated all of them to firmware v7.5.2. They are working OK, but I have lost some of my RSSI. It is about three clicks worst than it was. It went from a constant -58 ~ -59 to -62 ~ -64. (My iMac is not in the same room as my AE.)
If I weren't so "anal" I'd just live with it..... But I'm thinking of reverting them back.
AE from v7.5.2 TO v7.5.1
AX's from v7.5.2 TO v7.4.2
I have found v7.5.1 and v7.4.2 in the following folders:
(users)you>Library>ApplicationSupport>Apple>AirPort>Firmware>107>v7.4.2 & v7.5.2 / 114>v7.5.1 &7.5.2
Once located I think that we go to AirPort Utility, Select the AE or an AX, click Manual set up, Click "Version" on the first screen, then at the drop down select "Other". Next using the now opened Finder, go to one of the above folders and select the version to revert to and update.
I think this just might work..... *Again maybe someone can advise on this.......*
Oh, it's a good idea to locate the AE and AX's close to your computer. I just plug one at a time into an outlet next to my computer.
Hope we hear from an "expert" on this.....

MBP will not access n on TC Dual Band. Firmware 7.4.1 doesn't work either.

So maybe I'm missing something.
I have the Time Capsule dual band. Brand new. An Apple Care replacement of my original Time Capsule (non dual band). 1 TB versions.
Replaced because I can't access the 5ghz band from my MacBook Pro.
MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Wireless Card Type: AirPort Extreme (0x168C, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: 1.4.8.3
Current Wireless Network: xxxx
Wireless Channel: 11
I currently have the TC set with Radio Mode 802.11a/n-802.11g only. My MBP will only join the g side. I know this because holding down the Option key and looking at the Airport Menu icon shows I'm on channel 11 at Transmit Rate of 54.
In Airport Utility under Airport/Wireless/Wireless Options I have also allow the 5ghz network name to be shown.
I my Airport Menu if I select this 5ghz network I'm asked for the password. I type in the password and get connection timed out. All the time.
Now the interesting part:
The TC has firmware 7.4. If I upgrade it to 7.4.1 my computer will not even see the Time Capsule at all. I have to do a hard restart of the TC and immediately downgrade the Firmware back to 7.4.
Interesting part number two is:
I have an original Airport Extreme. The first release of the n Airport. If I try and use this unit at 5ghz also, my MBP will get the same Connection Timeout. But the MBP will work on n band at 2.4ghz. BThis running firmware 7.3.6 ( I think that is it). IF I upgrade this unit to 7.4.1? Again I will not even be able to see the Airport on my MBP. Again I have to down grade the unit to 7.3.6 after a hard restart.
So for me the 7.4.1 update is not workable. And Apple replaced my original TC twice with the same results. I returned them and they sent me the newest TC. And as stated above, the same results.
So 7.4.1 doesn't work at all for me.
5ghz n band doesn't work for me.
Any ideas? I'm assuming my Airport Card in the MBP is defective at this stage. It can't access 5ghz, And working on sending out the computer for check up to Apple. Or a Genius Bar visit.
Anyone else having n access on their computers? And the 7.4.1 Firmware?

Update to my post above- this is SO weird
If I manually select channel 40 on the 5ghz band, I can access 5ghz. I do not get the Connection Timeout. I on it right now.
Before I manually selected channel 40 the TC was in channel 149.
Does this mean anything? Now I'm not sure if the Airport Card in my MBP is defective or not.

Airport Extreme Simultaneous Dual-Band port forwarding broken if only TCP ports with firmware 7.6.1

When configuring my Airport Extreme Simultaneous Dual-Band router, port forwarding is broken if you only specify TCP ports to forward. This is with firmware 7.6.1. What happens is that after you hit the Update button, when the router comes back and you open the port forwarding entry, the IP is still there but the port numbers are missing.
I tried all different port numbers and ranges and nothing would stick if i only specified TCP ports. If i added UDP ports with the TCP ports then it would save them. And if you add a new entry with only UDP it saves them too.
Now this is with adding a new port forwarding. I already have existing ports being forwarded that only have TCP. They are still working. I believe i added them with a previous version of the firmware.
Any one else see this issue? Any ideas?
Maybe i should perform a hard reset and reload a saved config.
Peace,
Dan

I haven't seen the issue but you could just downgrade to an earlier firmware:

E4200 - Dual Band and Firmware Issues

I set this up (which was very easy) and felt like I was off and going in a minute, then the problems started. Everything just started dropping connections over and over again. My iphone would randomly refuse to connect, my laptop would forget the network and then be unable to connect, after countless reboots and a firmware upgrade it was worse than ever. My wifi printer would set up and connect and then go to sleep and lose the connection...
What solved it? Turning OFF dual band. I don't know why, but disabling the rarer 5ghz network that is supposed to share the same name and basically fade into the background was killing reliability at every turn. So it works perfectly fine (and the range isn't that impressive) as a regular 2.4ghz N router, which is what I had before. There was some serious problems adding a network hard drive as well (slow buggy, would forget it exists) as far as I'm concerned this is an unfinished product and shame on cisco/linksys for even allowing this buggy lame firmware out the door.
I'm a fan of linksys in general so I'm going to wait for another firmware upgrade and reset to factory defaults and try again.... but so far not great.
The only reason I gave it 3 stars instead of zero is that it's pretty solid without the dual band and I have faith that this will hopefully be addressed with an upgrade.

Reset the router again and reconfigure it again.
Open the set up page of that router using the IP address of 192.168.1.1
Then configure the router according to your ISP with the help of the website (KB.LINKSYS.COM)
Then create new SSID...Changed the channel to 9...set the wireless security as WPA2 personal..
Then upgrade the firmware
Power cycle the entire network..
Then See if the reconfiguration helps you.

Planned firmware update for previous dual band 2.4/5 'N' Airport Extreme ??

Hi, I purchased a Airport Extreme dual band 'n' router about 2 months ago. Now that the new generation has been released, is there a planned firmware upgrade available to previous generation users to move from the 'n' draft to the finalized 'n' specs? Also, is there any major changes from the n draft to the finalized n that improves performance, stability, etc...
Just curious want options, if any, people like me have?
Lastly, any chance I can bring in my APExtreme into the Apple store to get an upgraded antenna installed??

Now that the new generation has been released, is there a planned firmware upgrade available to previous generation users to move from the 'n' draft to the finalized 'n' specs?
Apple normally does not announce any firmware updates, so it would be pure speculation as to if and when they would provide one specifically for the finalized "n" spec.
Lastly, any chance I can bring in my APExtreme into the Apple store to get an upgraded antenna installed??
Since Apple has never (to my knowledge) offered an internal antenna upgrade for any of their wireless products, I don't think this would ever become an option. My guess is if it did, it would not be cost effective for you to go this route.

Beta Firmware for RG45GS

Hi peeps,
I am a technical Journalist from South Africa and have been using this product for a while now. Apart from the lack of certain feauters (I felt) mine also froze at random times. So being in the press I spoke to some people and one of the technical guys at MSI gave me the new Beta Bios for the RG45GS. I just installed it and I am happy to report that there are some nifty extra features. I have not been able to see if it cleared up my problem yet but I thought I should share this file with other to see if it helps them.
Please post here your feelings about this firmware and whether it solved your problems. Your input is much appreciated.
"While upgrading, don’t turn off the power or unplug the Ethernet cable. The process will take about 1 minute."
http://pcstuff.co.za/msi/rg54gs_combo.gzh'
Enjoy

Beautiful. This upgrade fixed my PPPOE connection problem.
I am now much, much happier.
I was a little apprehensive to apply an upgrade not from MSI. Still the RG54GS allows you to recover from a bad upgrade back to the original firmware (see the manual) to I decided to try this.
The first thing I saw was no PING/PONG on the ADSL modem lights when the PPPOE connection was enabled. The second thing was "connected" in the status page. Never seen that before, despite getting PPPOE init OK in the log messages.
More options on the PPPOE connection setup.
MTU length setting.
DNS specification.
Much, Much happier. I just wish MSI would own up to the original problems, drop in here and say "we are working on it". Getting stuff that doesn't work does not make one happy.

Can't install beta firmware.

Hi,
I am trying to install iOS 4.3 on my iPad. I alt click the 'Check for Updates' button, choose the .ipsw file but when I try to update, the update fails and I am put into recovery mode.
Has anyone any suggestions of what to do? I have restarted my computer, made sure itunes is up to date etc... but it will not work!
Thanks in advance!

If you are a registered developer, this should be asked on the developer forum. No one on here is allowed to respond to questions about beta software.
Try the developer forum:
http://discussions.apple.com/category.jspa?categoryID=164

Beta Firmware 2.0.0.7-K9 WRVS4400Nv2 dual-band?

Similar Messages

Maybe you are looking for