BEx Analyzer: Display values with Zero data

Hi,
I urgently need to know something about BEx QD/Analyzer:
If I drilldown e.g. Customer into the rows, it only shows me those customers for which there are values in place. However, I need to see all Customers, i.e. also the ones where the values are zero.
How can I do this in Bex Analyzer or if needed BEx QD.
Thanks
Sabine

Thanks,
but it won't be possible to create a multiprovider just for that.
Maybe I wasn't clear enough
If a have Customer A, Cust B and Cust C and I drilldown by customer in the rows, then the system only shows me Cust B and Cust C, because for a there has been e.g. no turnover in one specific month.
But in the drilldown in the report, I still want to see Cust A as well, even though the value is zero. So I should just see an empty line (instead of the key figures for Cust A).
Guys, that must be possible!! Help me
Sabine

Similar Messages

How do I sync my old iPhone 5 to a new laptop PC without losing any iPhone data? The "remove and sync?" option looks like it will leave me with zero data on the iPhone!

how do I sync my iPhone 5 to a new Toshiba laptop PC without losing any iPhone data? The "remove and sync?" option looks like it will leave me with zero data on the iPhone!

See Recover your iTunes library from your iPod or iOS device.
tt2

KE28 with" Copy Characteristic Value with Reference Data" doesn't work

Hi experts:
We need to make a top-down setting the processing option 'Copy Characteristic Value with Reference Data'. We have the following source data:
Customer Business Unit Value field.
6        #              100
On the other hand, we have plan data as reference data:
Customer Business Unit Value field.
       A              40
       C              40
       D              20
We need to run a top-down to distribute from client to Business Unit but copying client of reference data. Then, we set 'Copy Characteristic Value with Reference Data' and, in the selection criteria we set '*' for customer.
After running, the result is that the system can find 1 sender and 3 receivers. It is exactly what we are expecting. However, program doesn't make individual items and anything is distributed.
We have found notes 1086282 and 1273924 but the result is the same after implementing these notes.
Thanks in advance for your help.
Best regards
Jose

There are some restrictions on the XML Schema format that you can report off of in Crystal Reports.
If you're using the ODBC XML driver, you may find this of relevance:
[http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xml_data_sources.pdf|http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xml_data_sources.pdf]
and if you're using the native XML driver, the following gives a guide for the accepted formats:
[http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xi_native_xml_driver.pdf|http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xi_native_xml_driver.pdf]
Sincerely,
Ted Ueda

BEx Analyzer: Formula Variable with Replacement path change Month with Day

Hi experts I'm facing this issue in BEx Analyzer.
I need to have some dates in format DD/MM/YYYY in Index Structure, in order to do this I've created a formula variable with replacement path referenced to 0CALDAY characteristic.
The formula works but it behaves in a strange way:
if the day is higher than 12 the displaied result is correct (DD/MM/YYYY)
if the day is lower or equal 12 the displaied result is wrong (MM/DD/YYYY)
I'm on BW 7.01 SP6 and BEx Analyzer 7.10 SP12, excel 2007.
anybody has faced this issue before?
any help will be appreciated
Daniele Cortopassi

Hi Daniele,
This seems pretty strange. Pls. redo validation with the dump data, as being a flat struture BEx does not apply any logic changes. May be it might have been MM/DD/YYYY format as in workbooks. Else you may change the property of 0calday display as "Text". Business Explorer > Display > KeyMaster Data/Texts > Texts (Plese check this option). If you are using some text table you may maintain the same using BI0/TCALDAY (Similar to BI0/TCALMONTH2). Guess it should be an excel based issue; if not you may try the same in WAD/Report designer to verify the nature of the issue. If you don't face these inconsistencies in WAD/RD then you may change excel formatting options. Lastly, please let us know if the infoobject has some predefined settings in RSA1 > Infoobject > (BEx) Properites.
Thanks,
Arun Bala

BEx Analyzer displays wrong number of decimal places after implementing BW patch

Hey folks,
we patched our BW 7.31 from PL10 to PL15 last weekend and now we got some issue with the number of decimal places shown in BEx Analyzer 7.x.
One example for KF X
Settings Info Object X
Decimal Places:                         Not defined
RSRT - Display X
Shows 3 decimal places
Query Designer Settings using KF X
Number of Descimal Places:     0 [Use Default Settings: NO]
BEx Analyzer Properties for KF X
Decimal Places:                         0
Resulting in BEx Analyzer workbook shows 3 decimal places instead of 0!
Anyone with an good idea about that?
Thanks,
Andreas

Hi Andreas,
Have you used the list calulation like "Calculate Result As Average" or "Calculate Single Values as normalization of result" in the relevant key figures?
For "Calculate Single Values as normalization of result",iIt is the known design that it is always displayed with three decimal places for normalized values, and the setting in Query Designer for
decimal place doesn't take effect.
For "Calculate Result As Average", the following note maybe relevant.
2096911 - Decimal places in query result is wrong, if average is used and display precision is set to less than 3, it will always show 3 decimal places.
Another clue is to check if the key figure is a Quantity type with unit, and what's defined in table
T006 field ANDEC for this unit.
Hope this helpful.
Regards,
Ceciclia

SAP BEX Analyzer Set values for variables

Please help us out in sorting out this problem,
We are automating BEx Analyzer for a Testing Project with Quick Test Professional (QTP) a functional automation tool uses VB script.
Problem:
There are 5 steps in automation
Invoke BEx Application
Log in to BEx server
Run Query
Set values for Variables for Query
Display Report
We are able to do 1,2,3 steps using BEx API functions and running BEx macros but we struck up with 4th step,
1. Invoke BEx Application
Launch Excel
Dim app
Set app = createobject("Excel.Application")
Make it visible
app.Visible = true
Attach add-in to Excel file
app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SetStart")
2. Log in to BEx server
Login to Bex server
Function logonToBW(app)
Dim myConnection
Dim logonToBW2
On Error Resume Next
logonToBW2 = True
' Create logon to system with following user and system details
Set myConnection = app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'! SAPBEXgetConnection")
With myConnection
.client = "600"
.User = "USERNAME"
.Password = "Welcom123"
.Language = "en"
.systemnumber = "00"
.System = "BWDCLNT600"
.systemid = "BWD"
.ApplicationServer = "156.158.7.161"
.SAProuter = ""
.Logon 0, true
     If .IsConnected = 0 Then
           .Logon 0, False
If .IsConnected <> 1 Then
MsgBox "Automatic logon failed. Please enter your username and password in the next screen ..."
Exit Function
End If
End If
End With
' Run connection query to see if connected
app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXinitConnection")
logonToBW2 = True
End Function
3. Run a Query
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'! runQuery", "ZZCCA3_M01_Q0003"
Till here the script is running fine then the Select values for Variables window is displayed.
This is where exactly we struck up; in this window we need to select values.
Name of the Fields
     Field Name     Technical name of characteristic     Variable Name     Value
1     Company Code                     0COMP_CODE     ZM_COMPCODE     1000
2     Cost Center Hierarchy          0COSTCENTER     ZS_CCTRN     1000MDON
3     Cost Center Node     0COSTCENTER     ZS_CCTRN     1000COP
4     Cost Element          0COSTELEMENT     ZS_COELN     1000GDON_6999
5     Fiscal Year     0FISCYEAR     0P_FYEAR     2007
To select values for variables, we are trying below code but its giving an error,
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000, "0COMP_CODE"
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000MDON, " 0COSTCENTER "
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000COP, "0COSTCENTER"
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000GDON_6999, "0COSTELEMENT "
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 2007, " 0FISCYEAR"
Any help highly appreciated, thanks in advance.

Hi Reinhard,
Pleas look at this:
Passing a range to SAPBEX.XLA!SAPBEXSetFilterValue
Best regards,
Eugene

BEx Analyzer: Exchange characteristics with design item "Button"

Hello everyone,
I am creating a workbook with the BEx Analyzer. The user should be able to exchange one characteristic with another one by a button click (e.g. replace the drilldown of characteristic product group by a drilldown of customers).
I inserted a button in the design mode and edited it with the command wizard.
In the area for the static parameters I inserted the following:
Name/Index/Value
DATA_PROVIDER/1/DP_1
CMD/1/EXCHANGE
IOBJNM_1/1/Product Group
IOBJNM_2/1/Customer
I tried several variations of this, but they all didn't work.
Does anyone know how to define such a command?
Thanks in advance for your answer,
Rainer
Message was edited by:
Rainer SIGG

Hi,
Button Design item is used to perform three types of functionalities
1. Workbook specific Commands : these are helpful in performing any changes or navigations in the workbook. For example moving from one sheet to another on the click of the button can be realised.
2. Planning Specific Commands : these are used mostly when a planning scenario is realized using the Bex workbook. Planning commands usually would be to save data in the workbook created on an input ready query to the plan cube, or to execute a planning function or a sequence.
3. Data provider specific commands : Commands used to change data based on a spcfiic dataprovider.
Let me know if you are looking at anything else other than this.
Regards
Snehith.

BI 7.0 Bex Analyzer not working with excel 2007

Hi All,
I have installed the BEX 7.0 with MS office 2007 but the Analyzer is not working. The open file symbol does not give any option on the click.
Please help.
Regards,
Abhishek

Hi Abhishek,
This is a BEX Add-in problem.
Follow the below step....
1. Copy the Tool
2. Change the Tool.xls into the Tool.xla
3. Copy the Tool.xla file
4. Open My Computer window
5. Navigate to the following folder
a. C:\Program Files\Common Files\SAP Shared\BW
b. Paste Tool.xla file into this folder
6. Open Bex Analyzer
7. Open a Query or Workbook
8. Click on the u201CToolsu201D Menu on the Top
9. Select u201CAdd-Insu201D from the Tools menu
10. Click Browse from the Add-Ins window that opens
11. Browse to the file you just saved
a. C:\Program Files\Common Files\SAP Shared\BW\ Tool.xla
b. Click Ok to continue
12.The Tool for Excel should not be checked in the Add In window
13.Click Ok to continue
14. Close
15. Re Open Bex Analyzer
16. The Tool command should be displayed at the top of the Tool Bar
17. Close Bex Analyzer
18. Open Excel
19. The Tool command should be displayed as well at the top of the Tool Bar.
Hope this helps...
check the below link
http://www.sytecpa.org/software/BWInstructions/Installing%20the%20SAP%20BEx%20Analyzer%20Excel%20Add-In.pdf
Regards
KP

Bex Analyzer displays # in the Blank Fields

Hi Experts,
When I execute the Bex Analyzer. The display gets the # in the blank field.
Can anyone tell me how do I

Hi Vikram,
Thanks for your reply,
When you say
--> Change the query properties to " display blank value as "
I don't get it. Could you tell me where do we have display blank value as
Please reply,
Thanks

How to compare the date value with the date datatype column?

Hi,
I am executed a query to get output for the particular date in two different database.
I got output in one db environment, but in the another environment i didnt get the output.
APP_DECISION_DATE column contains date datatype
ex:
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where APP_DECISION_DATE = TO_DATE('23-JAN-07',
'DD-MON-YY'); 2
DECISIONED_STAGE_ID DECISIONED_STAG
2006060106 SYSTEM
DATABASE - II
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where APP_DECISION_DATE=
TO_DATE('31-JAN-2007','DD-MON-RRRR') and application_id=2007010028552;
no rows selected
in the same db i got the output while i used the TO_DATE(APP_DECISION_DATE)
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where TO_DATE(APP_DECISION_DATE)=
TO_DATE('31-JAN-2007','DD-MON-YYYY') and application_id=2007010028552; 2
DECISIONED_STAGE_ID DECISIONED_STAG
2006060113 SYSTEM
is it necessary to use TO_DATE function while i am using the data datatype column in the WHERE CLAUSE?
Thanks in advance.
siva

Sorry & thanks sathish,
Now i got the result.
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where APP_DECISION_DATE BETWEEN TO_DATE ('31.01.2007 00:00:00', 'DD.MM.YYYY HH24:MI:SS') AND TO_DATE ('31.01.2007 23:59:59', 'DD.MM.YYYY HH24:MI:SS')
2 and application_id=2007010028552;
DECISIONED_STAGE_ID DECISIONED_STAG
2006060113 SYSTEM
================================
But one doubt,
When i created the column with the date datatype how it gets the time value,
And in one environment db i got the result but in another environment i dont get,
Shall i want to change any session status of date?

Change date format in EP when introduce values with "/" as date separator

Hi experts,
We have ECC 6 EHP3 with Enterprise Portal 7 SP 18. We instal BP_ERP5ESS
1.31 SP 4.0, BP_ERP5COM 1.31 SP 4.0, BP_ERP5MSS 1.31 SP 4.0, SAP_ESS
603 SP 4.12 and SAPPCUI_GP 603 SP 4.1
We activate the Travel Management (FIN_TRAVEL_1) business function, so
we use WD ABAP for travel expenses.
The issue is when in the Portal, go to Travel and Expenses and create a
new travel request or a new expense report and introduce the values of
the date with "/" as separator. The system changes the date format, and
change the days for months and months for days, DD/MM/YYYY change to
MM/DD/YYYY. For example if we introduce 31/12/2009, the system change
to 12/31/2009 and gives an error.
If we introduce with "." as separator, 31.12.2009, it works fine, don´t change days for months, so it seems that is not a problem of language settings.
Any idea?
Thanks in advance,
Manuel

Hi,
You can check the date formate in the portal.........
log in by the Super Super give the user name ...........and check the details..........
in there in the 1st ..view you can set the date formate..............

Formating with Zero data Out takes 18 days..?!

I want to format my iMac with zero out data, but it takes 18 days for a 500Gb HD.
(I'm not even going to comment on the 35-pass format)
Now this is obviously ridiculous, and i'm now trying to decide if it's worth waiting,
or do I just smash the screen with a sledgehammer right away. The iMac started
getting slower and slower everyday a few months ago, and now it takes an average
of 49 minutes to load google.com. Way to go! I've had it for 5 years now.
I browsed a lot but can't find any solution. Any Ideas?

Just Re-partition and format then reinstall the OS. If it is still slow then you have a hardware problem. More then likely the drive is failing, Replace it.

Error when using BeX Analyzer 7.0 with Excel 2007

When i try to execute a query in BeX analyzer 7.0 and my microsoft excel version is 2007, there will always have a fatal error showing. However, when i use the Bex Analyzer 3.5 , i could execute the query.
Anyway to solve this problem?

You need to do the following
Identify the SAP GUI version you're using, 6.40 or 7.10, and the patch level.
Identify the BW or BI Add-on and patch level of it.
From there, check to see if the versions you have actually support BI 7.0 and Excel 2007. Reliable Excel 2007 support requires failry current patch levels of both the SAP GUI and the corresponding BW/BW Add-ons..
Do you have access to a PC that has a more recent version of the SAP GUI and BW/ BI Add-on? If so, try using that PC and see if you still have the problem.

Positive Value with Zero Stock

hi Experts
I noticed while doing a stock audit report that I had a positive value of £35.00 for a item code where the stock level was zero. How can I get the amount down to zero too? Stock Revaluation won't work because there is no stock and any in/out stock transaction simply result in outstanding amount of £35.00.
We are using FIFO for value . I would also be interested to know how I can query other items with this issue?
thanks
Geoff
Edited by: Geoff Lord on Jul 8, 2011 5:26 PM

Hi Goeff.......
If the stock of the item is zero and still it shows the item cost then this means nothing.
It does not affect anything in system.
The moment you book GRN the purchase value will be overrite on it. It only shows for display as last price......
You can try a purchase in demo DB and then run the Audit report you can find the difference.......
Regards,
Rahul

BEx Analyzer - Filter value

Hello,
Please help me in the following issue:
I have craeted a query that has in the filter charactristics Storage Location and Warhouse.
In th Query designer if I want to restrict the characteristic I can see all the values. In Analyzer, I can not see any values, only not assigned.
This happens for Warhouse. For storag location everything is ok.
Do you have any idea why this could happen?
Thank you,
Ramona

Hi
Check ur DSO for data for that particular field .... if it is present then check for field routine if any..
there should not be any problem in getting value in Cube...
And for your query u can restrict a field in query designer and then your report will run with this restriction only....
Other wise u can have variables defined in query for restriction at run time.....
Thanks,
Vikrant

BEx Analyzer: Display values with Zero data

Similar Messages

Maybe you are looking for