Bex Analyzer-No space error on refreshing the Workbook
HI all,
I am trying to execute a workbook with below fields
Parner ID,Cus Name,Market class and volume.
The requirement is to show the top 5 customers in the workbook.As there are huge volume of records I just filtered on Market class and executed the query and applied the condition on Partner ID and volume then came back and removed the filter and everything is fine and showing overall top 5 customers.
When I closed that workbook and trying to refresh it then it is showing No Space error .I am just wondering what could be the reason for this.Any help is highly appreciated.
Thanks in advance
PV
Edited by: S VR on Feb 6, 2012 4:35 PM
1. Try creating aggregates & rollups, if data is very huge, BASED on the query.
2. Check OLAP cache by the RSRCACHE. Check the report/query performance in BEx/HTML via RSRT.
3. Do some research on the query properties, fine tune; don't just drag drop cios. Try with minimal restrictions.
4. For Top-N type series, you can use APD also for better & faster analysis.
Similar Messages
-
Which macros does BEx Analyzer use? How to call the refresh macro?
Hi everybody,
I would like to get an overview about which macros the BEx Analyzer uses, espacially the macro which is responsible for refreshing the workbook. I want to know what BEX Analyzer is doing when I open the variable screen, I assume there is an SAP macro that opens the variable screen?? I tried to look in the online help at help.sap.com but couldn't find a list of macros.
The idea behind this is, that I have a BEx workbook with 5 queries in it. A colleague now wnats to write a VBA code that calls the variable screen, enters company 1, period and year, runs the workbook and saves it. Then opens the variable screen again, enters company 2, period year, etc etc etc......
What my colleague needs to know is which macro he has to call for the workbook refresh / variable screen in order to make his VBA coding.
Many thanks in advance!!
MichaelWhich version of Bex are you using ? Bex 3.5 or Bex 7 ? This will significantly affect the answer.
For Bex 3.5, here is some useful information;
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/frameset.htm
Edited by: Charlie Belt on Jun 7, 2011 9:12 AM -
NO INTEGRATION SERVER, Error while refreshing the XI runtime cache
Hello guys,
I have the following error in an integration scenario of SOAP -> PI -> PROXY.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">BUSINESS_SYSTEM</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>NO INTEGRATION SERVER</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone migth now what could be happening? I already checked The Receiver XI Adapter parameters and everything seems to be rigth.
Thanks for your help,
Regards,
FelipeHi,
The error is clearly showing there is cache error.
To resolve this..go to SXI_CACHE tcode and do a delta cache refresh or full cache refresh.
That will solve ur problem
Please award marks if found useful.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from requesting points
SDN PI/XI Forum Moderator
Thanks
Hamja -
Error while refreshing the XI runtime cache
Hello All,
Here is what happened.
After PI7.0 install with client 001, I did the BPM scenario and it worked. After the performing the client copy the BPM stopped working with the new client. I did the client copy per note 940309.
The file is getting picked up (set the processing mode to delete).
Getting the following error in <b>SXMB_MONI</b>.
<b>"SXMB_MONI_BPE"</b> doesn't show any info as the file has never made to BPM (I guess).
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
As always help is much appreciated and points will be given.
Regards,
N.SCan U check the RFC destination INTEGRATION_DIRECTORY_HMI.
Check the connection, it should give response code 500.
otherwise check whether U have given the correct URL
in the path prefix.
/dir/CacheRefresh
Check the User has proper authorization.
With regards
K.Varadharajan -
Getting error - "Error while refreshing the XI runtime cache"
Hi,
for both inbound and outbound I am getting error - "Error while refreshing the XI runtime cache". Please find the error details below:
<u><b>FOR INBOUND:</b></u>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
<u><b>FOR OUTBOUND</b></u>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks in advance for your inputs..Rajesh,
>>500 Internal Server Error
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: REQID not found].
Exception id: [001279CFE174006E000000B900001D3C0004275E9952BCCA]
This is not an error status. This is an expected result. You can see this in XI configuration guide.
Regards,
Jai Shankar -
The hidden columns of wrokbook will appear when refresh the workbook
Hi,expert.
I create a query,the query has 3 columns,
Fields Name: Col_A, Col_B, Col_C
Fields Value: 1001.....001 ... X
I want to connect the Col_B and Col_C, so I add a column Col_D, like this:
Fields Name: Col_A, Col_B, Col_C, Col_D
Fields Value: 1001 ... 001 .. ..X .... ..001X
and then I hidden Col_B and Col_C in the excel. save the query as a workbook.
When I open the workbook,and refresh it,the hidden Col_B and Col_C were appear.
PLZ tell me how to hide the columns Col_B and Col_C, If I refresh the workbook,they will be hidden either.
My BEX Analyzer version is BI AddOn 7.x(based on 7.10), Support package 8, Revison 1408.
TKS.
Edited by: Bruce Wang on Jul 26, 2010 11:28 AM
Edited by: Bruce Wang on Jul 26, 2010 11:29 AMHello Bruce,
As mentioned by others.
If it is possible, try to hide these two columns in the query designer.
If there are few calculaions need to be done in excel with these fields, then include a macro to the hide these columns.
You need to include the code to hide these columns to the exit macro 'call back'.
Hope this helps.
Regards,
Hari -
Error when refreshing a workbook - urgent
Hi,
I have a workbook containing 2 queries. No modifications have been made to the queries and they used to run fine.
Recently when I refresh the workbook I get the following error in the SAP Error messagebox:
<b>The property Constant Selection is active for element 1..
The characteristic 0INFOPROV is, however selected in 1. and the propertie
Constant Selection and Display Non Accounted Values are
active in 0INFOPROV. This combination of settings cannot be processed
Message no. BRAIN084
The property 'Display Not Accounted Values' is not allowed here</b>
Note that no modifications have been done to the query. I have 2 variables for input, Fiscal year period and the Version (Plan, Q1, Q2 etc).
Any help would really be appreciated.
Thanks in advanceIn the key figure properties, there is a property called 'Constant selection'. Uncheck this box, resave and try again.
Regards, Frederick -
Error while executing the workbook query.
Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil VaddeHey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK -
Getting error while opening the workbook
Hi,
I am getting one error while opening the workbook.
Error: The Dependency "Join condition" is not found in EUL.
Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
Please advice.
Where i can get the dependency information in EUL?
Thanks, rajeshThis has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
Russ -
Getting error while refreshing the Webi report
Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H -
Working in BEx Analyzer but giving error dump in Web Analyzer
Hello Experts,
I have a BEx Query, that has couple of customer exits for initial filter selection, and some base KFs and conditions as part of definition. When I run this query in RSRT or in Bex it was running fine, and results showing up in 3 to 5 seconds hardly 10 seconds.
but the same query throwing error in Portal / Web Analyzer.
error contains;
Error Summary : error processing the current request
root cause: The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
Messages: warning there is a condition on Plant and Material to suppress results.
contest: under this heading many line of HTML code
when I debug the query in RSRT, I found any issue, all the exits, and the query is quite OK.
does anyone has any idea, whats going wrong?
we cannot suspect the portal / Java patches or anything, Because we have other queries running good.
could someone give me some idea..how to go through this portal/web related errors.?
Appreciate your time and helpThanks for your help.
This issue was caused by "Bad programming in Customer Exit". Exit is trying to give too many Single values as selection to certain batch characteristics plus some are redundant. So code logic modified to fetch distinct values hence problem solved.
it worked in BEx analyzer but not in Web is just because of its limitations. As I said there is no syntax errors in the exit rather bad logic.
Thanks Again -
BEx analyzer - report execution error
Hi all,
while running on BEx Analyzer we encountered an error which gives communication error with the Bw server failed due to RSR_NET_RESULTSET_GET_S error. anyone has an idea to resolve this issue?
Thanks in advance.hi
Thanks for the reply.
We checked the connectivity and it was oki..
The problem arise when executing reports in development client. production reports are working fine.
BEx installation check is also performed and found no errors.
Trace file indicates as follows :
Trace Started as: 4/3/2009 11:40:14 AM*
ListSeparator: ,
ExcelVersion: 11.0
AddinVersion: 7100.1.602.1292
BExCheckFrontend.CheckFrontend: No Check performed (20090402) 0
Conflicting workbook ids: iWBid: , Property: 7B2UOAYFBA2MLMWMBSDZJDSF0
4/3/2009 11:44:02 AM----
com.sap.bi.et.analyzer.api.BExApplication+BExConnectionLostException: Function module "RSR_NET_RESULTSET_GET_S" not found.
at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Function module "RSR_NET_RESULTSET_GET_S" not found.
at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Please let us know a solution ..
Thanks! -
Error while refreshing the BO WebI report
Dear Friends,
I have created BO report on top of BICS Query in BO 4.0(have used aroung 15 BICS queries in to the report) and able to see the correct data.
I have used hierarchies and also selected levels in to webI report. Last week I am able to refresh the report but since two days I am getting some strange errors.
Errors:
1) Unable to run the empty Query.
2) When trying to invoke the method com.sap.ip.bi.bics.dataacess.consumer.queryview.results.et.IRsAxisTupleelement.Getcharateristicmember() of an object loaded from Local Variable 'element'(WIS00000)
Can you please help me on this isse.
Regards,
EswarHi,
Was there any recent Patch up/downgrade done in your environment?
What is the current Patch level?
Also, did you get a chance to look into the Fixed Issue ADAPT01626356?
Regards,
Muthulakshmi Ramanathan -
Getting error when refreshing the WebI report
Hi,
I am building WebI reports using a universe which is constructed over a BI cube.
Initially I am building the report and uploading it into CMS.
When I am importing the report from CMS and refreshing it, I am getting an error
"A database error has occured. The database error text is: A runtime exception has occured. (Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
What could be the reason for this kind of behaviour?
The version of BO is 3.1.Hi,
Your answer was really helpful, and it worked upto some extent. I have updated the lisence key and the following error is no longer coming.
"(Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
But now I have a new error popping up when ever I import a report from CMS and refreshing it.
The error is "A database error occured. The database text is: The supplied XML is not valid.[SYMTNKEY].[LEVEL 01]. (WIS 10901)." -
Reg: Error while refreshing the WebI Report
Hi all,
I created WebI report based on universe that is connected to Excel data. Through DSN I m accesing Excel Data . I created same DSN in server also. If I refresh the webI Report in BO server it tells the following error.
A database error occured. The database error text is: [Microsoft][ODBC Excel Driver] System resource exceeded.. (WIS 10901)
Before that its working fine. what may be the problem?
Regards,
Hemalatha JThis seems to be a data source not a BO problem. Take a look here:
http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/05aaccd6-2a38-4784-b310-99e34b8d1a35
Regards,
STratos
Maybe you are looking for
-
How to add Z set types in Web UI
Hello , We have created Z set types with 4/5 attributes & assigned it into a Z category. The Z set types are showing in GUI in individual objects but when trying to add these set types in Web UI it;s not showing either in BSP component PRD01OV or PRD
-
Since I installed Lion, I keep finding programs that won't run, but which ran fine on Snow Leopard. (Apple even eliminated MacSolitare.) How can I downgrade back to Snow Leopard? Do I have to erase my HD and start all over? I have my stuff backed u
-
?I am using Creative MediaSource Player 5.0.38 as an MP3 player on my computer:?. Can we get MediaSource to display mp3 file names instead of mp3 tag information when file is being played as part of a Playlist???2. Playlists are stored in this locati
-
what is the SAP program to extend all material to a new plant Mohan
-
Installation problem with the new iso after trying to install the LTS
I tried to install arch (i have always succeeded before) but i wanted to use the LTS kernel. When choosing packages i unchecked the linux package (which provides the 3 kernel) and checked the kernellts package. After i was done with the configuration