BEx "Can be changed in query navigation"

Hi all,
I am using BEX setting for variable "Can be changed in query navigation".
Unfortunately it is not working.
The variable has following setting:
Type of Variable: Hierarchy Node
Processing by: Authorization
It is Ready for Input + Can be changed in query navigation.
Problem is when user filters some value in hierarchy and after that calls variable screen again and runs the report again, the selected hierarchy filter disappear and report display whole hierarchy.
Is it allowed to use Authorization variable with this "can be changed in query navigation" setting?
Any idea what could be wrong?
Thanks a lot.
Best regards,
Petr

Try the following...
Right-click on the InfoObject in the InfoProvider and choose "Provider-Specific Properties". In this menu, change the Display setting to "7 Short Text".
Hope this helps...
Bob

Similar Messages

What does the option "can be changed in query navigation"?

Hi all,
I have created several variables so far, but I never activated this option. I have always ignored that option and everything works fine.
But now I tried to rebuild some variables from other developers and saw this option activated. So before I just copy them, I need to know, what "can be changed in query navigation" really does. I already have read the SAP Help documents but still don't have a clue about the functionality. Thank you for answering!
Best regards
T. Duong

If you choose the Can Be Changed with Query Navigation option, after you have run the query, not only are you able to select the values that you specified in the variables screen, but you are also able to use other values as dynamic filters for the query .
This function is not possible if you are using the variable as part of a structure in the query definition. The system ignores the setting Can Be Changed with Query Navigation in this case.
Hope it helps.
Regards

Cane Be Changed with Query Navigation

Can U tell me how this function works??I tried many times but it behaves like a normal variable without this function....
Help.sap says "you can also access values that are not found in the value area of the variable entry"....How can I access other values?

Shreya
As said we can't find any difference while query is executing and you could filter the variables in the query
designer and you will see dynamic variables while running the query in addition to your selection of variables
Please check this for details
http://help.sap.com/saphelp_nw04/helpdata/en/37/4e3ed4ce9b9a4298ec0ed199512b8c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/22/1e9b3c334d8c15e10000000a114084/content.htm
Hope this helps
Thnaks
Sat

BEx: How to change a Query Variable that is not visible in Filters List?

Hello Experts,
Good day, I'm currently editing an old query, I am changing the Query Variables with new ones, but I found one variable that I cannot replace.
Please see the screenshot below, in the Query Properties Window [Variable Sequence Tab (right side of picture)] the Variable that I am trying to replace (Unit) is visible. But when I look for the variable in the "Filter Tab" (left side of picture) under Characteristic Restrictions, it doesn't exist in the list.
How can I find this Variable and replace it with a new one?
Other reports are still using this variable so it will impact the other reports if I simply edit the variable. So I need to replace it with a new variable instead.
Thank you for your time.

Hi,
SInce you are searching for a variable for Unit, look into below screenshot and navigate to the variables.
First click on drop down and select 'Entry for variable' then you will get lisl (after you click on drop down in 'Target Unit' drop down option.
Normally these type of variable called 'Formula Variable' try editing any of the formula and locate the option as shown below,
Hope it helps! don't forget to update the final solution and mark the correct/helpful answers.
Remember it will help others to find the solution and motivate the members to answer your question.
Thanks,
Umashankar

Can you change and save navigation buttons in free adober reader XI?

Using Windows 8 and Adobe Reader XI. Can't seem to save changes to navigation buttons i've added so they show for every document i open.
I went into edit/preferences/documents/ checked "Restore last view settings" but still won't save.

Used to be able to in previous versions. Do you know which version and can I revert back to that version?
Sandy Kleinhenz
[signature deleted by host]

Can i change BI Query before loading it to BO using some if than else logic

Hi guys
In my requirement I have a BI query which the users want to run in BO now. Now the requirement is that they want to change some values in the BI query after the BI query has run based on some u201Cif than else logicu201D for each row.
So my question is can BO modify a BI query. Is there some place I can write an abap routine between the BI query and the BO Report.
Thanks

Hi Adnan, in CR you can create Formula Fields, and you can include IF THEN ELSE statements there. This won´t modify the BI query, but´ll modify the results you see in CR (I believe this is what you want)
Here, you have information about formula fields, CR 2008 User Guide in chapter 22
You can do, something like this:
IF {Tabla.Campo}=1
THEN "AAA"
ELSE "BBB"
Hope this helps,
Liliana

Changing variable values in query navigation

Hello,
We used to use the functionality of a user exit variable for a web template query and could enter a default value for a query, like yesterday's date. This allowed the web template to be presented without a user having to enter variables in order to initially see data. Then either dropdowns or the navigation block objects could be used to navigate the query. To do this the, "Can be changed in query navigation", was set to on. In BI 7.0 this functionality has been removed. Is there a way to provide a default value to a characteristic that can still be changed during query navigation?
According to documentation this functionality has been enhanced with default values in the variables but there does not seem to be a way to enter a non-fixed value and still change it during navigation.
Any assistance would be appreciated.
Thanks,
Rick

This can be done by changing the variable to be processed with user exits and changing the user exit for variables to populate the variable value at runtime.

Bex request can not collect the change of query

HI every one:
     Bex request can not collect the change of query automatically ,eventhough This query has ben transport before and have the same dev class with the Bex request.
        when I press the button to save the change of query , a dialog was pop up to let me assign one request to this query.
          who can help me ?! thanks alot!
Best regard
david

Hi David,
already previous request is transported to Q or P....so when ever u try to change the existing query in BI.. the assigned request is not available in 'D'. so its asking to assign a request. for this
go to transport connection in Admin Workbench>there in right top u willl find a transport symbol for bex> click that for creating a request for bex queries--> after creating that request try to open ur query and do necessary modifications, what ever the modifications you do will come under this newly created request.
reply back if u have any questions
Thanks and Regards
Ajay .D

How to change query navigational state in broadcast setting

Dear experts,
I have a question information broadcasting in BW 3.5
We have the following usage of broadcast settings
- open query with bex web
- add special filters, drill-downs etc.
- add this as a new broadcast setting with Mail recipients etc. - the format is "html-file"
- schedule the setting
This works fine.
But, if I have to make changes to the navigational state (e.g. set additional filter) of the broadcasted query for the future - how can I do that?
How can I open the "view" behind the setting directly?
Best wishes
Gregor

I have not found a solution yet but currently I have a workaround:
Before switching to Broadcaster I generate a bex-web-bookmark.
Then i add this bookmark in the text of the broadcasting seeting.
Gregor

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

How I can change this query, so I can display the name and scores in one r

How I can change this query, so I can add the ID from the table SPRIDEN
as of now is giving me what I want:
1,543     A05     24     A01     24     BAC     24     BAE     24     A02     20     BAM     20in one line but I would like to add the id and name that are stored in the table SPRIDEN
SELECT sortest_pidm,
       max(decode(rn,1,sortest_tesc_code)) tesc_code1,
       max(decode(rn,1,score)) score1,
       max(decode(rn,2,sortest_tesc_code)) tesc_code2,
       max(decode(rn,2,score)) score2,
       max(decode(rn,3,sortest_tesc_code)) tesc_code3,
       max(decode(rn,3,score)) score3,
       max(decode(rn,4,sortest_tesc_code)) tesc_code4,
       max(decode(rn,4,score)) score4,
       max(decode(rn,5,sortest_tesc_code)) tesc_code5,
       max(decode(rn,5,score)) score5,
       max(decode(rn,6,sortest_tesc_code)) tesc_code6,
       max(decode(rn,6,score)) score6
FROM (select sortest_pidm,
               sortest_tesc_code,
               score,
              row_number() over (partition by sortest_pidm order by score desc) rn
          FROM (select sortest_pidm,
                       sortest_tesc_code,
                       max(sortest_test_score) score
                  from sortest,SPRIDEN
                  where
                  SPRIDEN_pidm =SORTEST_PIDM
                AND   sortest_tesc_code in ('A01','BAE','A02','BAM','A05','BAC')
                 and sortest_pidm is not null
                GROUP BY sortest_pidm, sortest_tesc_code))
                GROUP BY sortest_pidm;


Hi,
That depends on whether spriden_pidm is unique, and on what you want for results.
Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevamnt columns only) for all tables, and the results you want from that data.
If you can illustrate your problem using commonly available tables (such as those in the scott or hr schemas) then you don't have to post any sample data; just post the results you want.
Either way, explain how you get those results from that data.
Always say which version of Oracle you're using.
It looks like you're doing something similiar to the following.
Using the emp and dept tables in the scott schema, produce one row of output per department showing the highest salary in each job, for a given set of jobs:
DEPTNO DNAME          LOC           JOB_1   SAL_1 JOB_2   SAL_2 JOB_3   SAL_3
    20 RESEARCH       DALLAS        ANALYST 3000 MANAGER 2975 CLERK    1100
    10 ACCOUNTING     NEW YORK      MANAGER 2450 CLERK    1300
    30 SALES          CHICAGO       MANAGER 2850 CLERK     950On each row, the jobs are listed in order by the highest salary.
This seems to be analagous to what you're doing. The roles played by sortest_pidm, sortest_tesc_code and sortest_test_score in your sortest table are played by deptno, job and sal in the emp table. The roles played by spriden_pidm, id and name in your spriden table are played by deptno, dname and loc in the dept table.
It sounds like you already have something like the query below, that produces the correct output, except that it does not include the dname and loc columns from the dept table.
SELECT    deptno
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
           SELECT    deptno
           ,          job
           ,          max_sal
           ,          ROW_NUMBER () OVER ( PARTITION BY deptno
                                          ORDER BY         max_sal     DESC
                            )         AS rn
           FROM     (
                         SELECT    e.deptno
                   ,           e.job
                   ,           MAX (e.sal)     AS max_sal
                   FROM      scott.emp        e
                   ,           scott.dept   d
                   WHERE     e.deptno        = d.deptno
                   AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                   GROUP BY e.deptno
                   ,           e.job
GROUP BY deptno
;Since dept.deptno is unique, there will only be one dname and one loc for each deptno, so we can change the query by replacing "deptno" with "deptno, dname, loc" throughout the query (except in the join condition, of course):
SELECT    deptno, dname, loc                    -- Changed
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
           SELECT    deptno, dname, loc          -- Changed
           ,          job
           ,          max_sal
           ,          ROW_NUMBER () OVER ( PARTITION BY deptno      -- , dname, loc     -- Changed
                                          ORDER BY         max_sal      DESC
                            )         AS rn
           FROM     (
                         SELECT    e.deptno, d.dname, d.loc                    -- Changed
                   ,           e.job
                   ,           MAX (e.sal)     AS max_sal
                   FROM      scott.emp        e
                   ,           scott.dept   d
                   WHERE     e.deptno        = d.deptno
                   AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                   GROUP BY e.deptno, d.dname, d.loc                    -- Changed
                   ,           e.job
GROUP BY deptno, dname, loc                    -- Changed
;Actually, you can keep using just deptno in the analytic PARTITION BY clause. It might be a little more efficient to just use deptno, like I did above, but it won't change the results if you use all 3, if there is only 1 danme and 1 loc per deptno.
By the way, you don't need so many sub-queries. You're using the inner sub-query to compute the MAX, and the outer sub-query to compute rn. Analytic functions are computed after aggregate fucntions, so you can do both in the same sub-query like this:
SELECT    deptno, dname, loc
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
               SELECT    e.deptno, d.dname, d.loc
          ,       e.job
          ,       MAX (e.sal)     AS max_sal
          ,       ROW_NUMBER () OVER ( PARTITION BY e.deptno
                                       ORDER BY       MAX (sal)     DESC
                                      )       AS rn
          FROM      scott.emp    e
          ,       scott.dept   d
          WHERE     e.deptno        = d.deptno
          AND       e.job                IN ('ANALYST', 'CLERK', 'MANAGER')
              GROUP BY e.deptno, d.dname, d.loc
          ,       e.job
GROUP BY deptno, dname, loc
;This will work in Oracle 8.1 and up. In Oracle 11, however, it's better to use the SELECT ... PIVOT feature.

What is the firefox navigation display storing? It's not my most recent sites or even those most accessed ... how can I change it?

what is the firefox navigation display storing? It's not my most recent sites or even those most accessed ... how can I change it? It seems way out of date to me

See https://developer.mozilla.org/en/The_Places_frecency_algorithm
*http://kb.mozillazine.org/places.frecency.(visit_type)VisitBonus
*http://kb.mozillazine.org/places.frecency.unvisited(place type)Bonus
See also:
* http://kb.mozillazine.org/browser.urlbar.default.behavior
* http://kb.mozillazine.org/Location_Bar_search

Can I change sql statement for some query runtime?

Hi All!
The problem that I have to implement report with query like this: select * from a where b in (?,?,?). The number of parameters depends on user choice. On the client side it will be a list of check boxes. Is there any way to implement such report? I can see just one way so far - to modify sql statement runtime.
Thanks!

hello,
create a user-parameter myListe or myWhere (wee examples below) and change your query to
select ... from ... where b in (&<myList>)
or even better
select ... from ... &<myWhere>
now you can pass in the constructed list or where clause. you can also construct the values in the afterParameterform-Trigger
regards,
philipp

Can i change table in query as per user given data

hi master
sir,
can i change table in query as per user given data
see
select * from @variable
i need use in lov
please give me idea
thankingyou
Aamir

You cant directly use in sql instead you can write an anonymous block and frame the query as per the input table name and then use execute immediate to execute the query.
Something like this
declare
qry_table varchar2(30);
qry_stmt varchar2(1000);
type typ_sample is table of VARCHAR2(100) index by binary_integer;
tab_sample typ_sample ;
begin
qry_table := &Table_name
qry_stmt := 'select a from '||qry_table;
execute immediate qry_stmt bulk collect into tab_sample ;
end;
Message was edited by:
Shasi

Where can i find RSRT query propertis Last changed by user details

HI All,
Some one has changed the RSRT qurery properties and we want to know Where can i find RSRT query propertis Last changed by user details.
thanks in advance.

Hello,
Please check the screen shot
In the Query Designer, General Tab Page showing the details as required at your end.
Regards
NS

BEx "Can be changed in query navigation"

Similar Messages

Maybe you are looking for