BEx Map in Excel: Print only result area

Hi experts,
I am in BEx Map - Excel, and I am trying to print the result area ONLY, without key figures, legend and so on...
Print Preview in Excel shows the key figures on the left, the legends on the right and a little version of the map (as if way too zoomed out) in the middle.
I know there is a post dedicated to the "print only result area" but its solution is "web only"
Thx,
Olivier

Arun,
Attaching a map in BEx-Excel is different from attaching a chart. When attaching a map, you can't choose in which sheet/workbook the map will be displayed. A new sheet is automatically added to the workbook holding the BEx query, period.
But thx anyway. I did try your thought

Similar Messages

BEx Web Reports: Print only Results area??

Hi gurus,
I know that it is quite messy printing BEx Web reports with 3.5. ....
Is there the possibility to print only the results area of a BEx Web report, e.g. without the menus (e.g. Rows, Columns, Free Characteristics)??
Thanks a lot for your answers,
Sabine

Try this link:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d">How To Enhance Web Printing</a>
Rgds

Print only selected area

Does a plug in exist for InDesign that would allow me to print only a selected area of the page? I'm looking for the exact same functionality that the Print Selection extension brings to Quark XPress.

This isn't exactly waht you want, but it might be close: http://indesignsecrets.com/free-layout-zones-add-on-is-incredible-productivity-tool.php

BEx map: dynamic areas in a map?

I have one question reg. BEx map: How could I realize dynamic areas for a map? Let's say I have a rectangular area describing some phenomenon. The end-user should be able to enter new areas.
All the dynamic geographical types refer points, not areas. I'd like to have a characteristic describing the area (polygon).
Any hint how I could solve it?
Regards KB

Timed out, close as cleanup

Retrieving BEx Query Results Area for use in Excel formulas

Hello,
I run BEx queries in workbooks and then use Excel formulas ( mostly VLOOKUP(LookupValue, ResultsArea, ColumnReturned,) ) to retrieve certain information from the query ResultsArea.
****Problem:
Depending on the query parameters, the query "Results Area" is larger or smaller.
****Non-optimal solution:
One way to define the ever changing Excel range occupied by the Results Area is to create an Excel name as:
QueryRange = OFFSET(QueryFirstCell,,,COUNTA(OFFSET(Sheet1!$A:$A,,COLUMN(QueryFirstCell)-1,,)),COUNTA(OFFSET(Sheet1!$1:$1,ROW(QueryFirstCell)-1,,,)))
Then, the only input required is the top-left cell of the Results Area, which stays the same (unless the query definition changes).
****Question
What is the best way to refer to an ever-changing query Results Area in an Excel formula?
Thank you!
Louis

It is actually much easier than that.
Use a VBA statement like the following:
Set RptRng = ActiveCell.CurrentRegion
This will retrieve the data in the Results Area, no matter what the size is.
Hope this helps...
Bob

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

Column headings are mismatched when export to excel (Data Only)

Hi All,
We have an old Crystal Web Portal designed using CE10 in VS 2003.   The crystal viewer shipped with VS 2003 exports to excel (Data only) in correct order where all the columns headers are matched with the corresponding data.
We have re-written the entire new web portal in VS 2008 with using CE10 on windows 2003 server. Everything works we can view the report, page navigation, export to PDF, export to MS Excel 97-2000.   However when export to MS Excel 97-2000 (Data only) option, the column headings are mismatched with the corresponding data.   I don't understand what changed between VS 2003 Crystal Viewer and VS 2008 Crystal Viewer.   I think this has to be the crystal viewer problem because I'm exporting from the viewer tool bar.
Here is the API referencing in the code:
In Visual Studio I'm referencing all CE10 10.0.3300 version api's. Howerver since Crystal Viewer with VS 2008 is newer and has 10.5.3700 version I'm using CrystalDecision.Shared and CrystalDecision.Web are version 10.5.3700.   These seems to have no problem. The entire web portal works fine.
More about Web Portal:
-User is validated upon login with CE10
-use selects the report from the list
-Report ID is then passed to reportdocument
-reportdocument API loads the report and
-Viwer.reportsource= reportdocument.reportsource
We cannot update Crystal Enterprise 10 right now.   I'm in the middle of deploying new web portal with VS 2008.   I have to resolve the Export excel (Data only) option and have the column headers matched with the data in excel.   I have tried everthing.
Can some help here.
thanks

Hi,
The report saves the printer information and if it can connect to the exact same printer then the print options will get passed to the printer.
If the report is being sent to a different printer, Crystal doesn't know if this new printer will support the same settings, ie. duplex or color. In our case we were setting the report to print duplex printing and landscape. When our application went to print it actually crashed because some of the printers didn't support duplex.
What we did is disable the print button on the viewer and added the PrintDialog control to our form. Use the ReportDocument.PrintOptions method to set the properties for the PrintDialog control.
var printDialog1 = new PrintDialog();
printDialog1.UseEXDialog = true;
printDialog1.AllowSomePages = true;
if (myLink.Parent.SavedPrinterSettings != null)
     printDialog1.PrinterSettings = myLink.Parent.SavedPrinterSettings; //Use any saved printer settigns
     printDialog1.PrinterSettings.Copies = Convert.ToInt16(copies);
     dr = printDialog1.ShowDialog();
     if (dr == DialogResult.OK)
     myLink.Parent.SavedPrinterSettings = printDialog1.PrinterSettings;     //Save the latest printer settings
     nCopy = printDialog1.PrinterSettings.Copies;               //Get the number of Copies
     sPage = printDialog1.PrinterSettings.FromPage;               //Get the number of Start Page
     ePage = printDialog1.PrinterSettings.ToPage;                    //Get the number of End Page
     myReport.PrintOptions.PrinterName = printDialog1.PrinterSettings.PrinterName;     //Get the printer name
     myReport.PrintOptions.CustomPaperSource = printDialog1.PrinterSettings.DefaultPageSettings.PaperSource;
     if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Vertical)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Vertical;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Horizontal)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Horizontal;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Simplex)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Simplex;
Hope this helps,
Brian

BEx: Suppress message in workbooks after growup result area

Is it possible in BEx Analyzer to prevent or to autoanswer the appearing selection box, if after query update the result area has to growup over 'query foreign' not empty cells?
In the selection box there are options, to tell BEx how to handle the used cell (insert whole row(s), move existing cells down or to right, overwrite existing cells).
How can i suppress or autoanswer (with VBA??) this selection box??
JM

Hi Juergen,
The answer to your question is ... not that I know of.
What I do is try to avoid this problem to start with.
The problem is caused when user puts additional entries in columns to the right or rows below the result table.
The easiest way to avoid this is to move the result table to the right, or down, and tells users to put their additional entries to the left or above the result table.
Another way to handle the issue is to "Name" (in Excel) the range that includes all of the result table, plus any additional user (or VBA) entries to the right or below so that BW will recognize all of this as if it were the original result table ... therefore, BW will delete the extra entries before attempting to rebuilt the new result table.
The Name to use depends on the local query ID. For example, if the local query ID is "SAPBEXq0001", then the Name to use would be:
"SAPBEXqueries!SAPBEXq0001"
- Pete

'' Prints only print'' never map directions on PC.

I have both a picture of printer on my bookmark bar. When I want to print the whole page exactly like it is......but the printer only printer the wording not the picture directions. I have printed receipes very good with both pic & directions. I have a Tosiba Chromebook laptop. I have changed all ink so that is not the problem. Also have not figured out how to get the HP appt?? thanks so much for your help.

Hello @mattesmom1,
Welcome to the HP forums.
I understand that you are having problems printing map directions from your Chromebook.
I would like to help.
A lot of map/direction sites are designed differently then a recipe site.
With a recipe, the images are on teh web page.
With the directions/map sites, the image is not static.
That is why often you can zoom in or out on the map.
On the Web page that you are trying to print from, there should be a print option.
This will be separate from the ones you normally use.
This will bring up a printer friendly version of the directions.
This should then print the image along with the written direction.
If I may, what site are you trying to print the map directions from?
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (being PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (apparently because they are PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Hi Mary and Matthew
You might find it helpful to "try before you buy" - there is a 30 day free trial offer for Office for Mac 2011, accessible from M's .com website.
You may be able to use this period to open and resave your old documents in a format that enables you to switch instead to using Apple's iWorks apps moving forward.
I initially intended to do something similar, but ended up buying Office as it provided an easier way (for me, at least) to continue working with years worth of old emails, letters, spreadsheets and other documents (from my PC days) without risking damage to their integrity, formatting, etc.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

Print only cursor-selected area of a PDF in Acrobat Pro, just as it is psbl to do in a browser

Hi
I want to print only cursor-selected area of a PDF in Acrobat Pro. That could be both text and images, which are in my selection. Just as it is psbl to do in a browser. Is it possible in Acrobat PRO?
I am using the latest Acrobat Pro 11.0.9

Thanks for your effort but this again clearly does NOT answer my question. I do see a particular problem and that is that I might want to select text and images over a range of multiple pages. In a doc of 20 pages I might want to make a single selection of the text starting PRECISELY at the MIDDLE of page 2 and then continue dragging my selection all the way to PRECISELY the MIDDLE of page 15, thereby selecting all text and images within the precise range of my selection. That is some 13 pages there and I want to print out ONLY THAT selection of text and images. And in that case I cannot use your suggestion with the marquee zoom. Do you get me?

Mapping Problem: only constants are mapped the rest is missing

Hi Community,
I have a really strange problem. I mapped a message type and an external definition (a modified IDoc) in the repository. If I use the test function of the message mapping everything is fine. All values and constants are mapped correctly from source to target.
So I configured the rest in the repository and the directory and activated it. But it does not work. SXI_MONITOR details show that the source flat file is converted correctly into XML format. But the mapping is incomplete. Only the target fields with a constant as source are mapped. The normal one-to-one mappings (source flat file to external definition) are missing. Somehow they are ignored. Not even an empty tag is mapped.
What I am doing wrong?
Thanks for you help,
Udo

Hi,
Take the payload from SXMB_MONI and test it in message mapping editor.
check the problem there..
Thanks,
Madhu

How could be calculate only result for cummulative value in bex level?

Hi Expert,
I have to requirement on bex level only result calculation
scenario below like that
Company code         % X
100                      10
200                      13
300                      15
Result           = only cummulative   (not sum eg 38)
So how could be achieve only this result value ??
Pls advice
Regards
Waseem

Hi Suman,
Thanks for reply
I had already applied its came only sum values
But i have to need only Result values . I am giving one more scenario like that
Comapny code         M               J                     L             D %
100                        70              30                     10             = 10/(70+30)*100 = 10
200                        80              20                     13           = 10/(80+20)*100 = 10
300                        150             50                    30            = 30/(150+50)*100 = 25
Result                                                                          =    L/(M+J)*M = 53/400*300 = 39.75
I hided the values M , J and L , need only result value above scenario so could be achive
pls reply
Regards
Waseem

BEx Map in Excel: Print only result area

Similar Messages

Maybe you are looking for