BEx Query Designer - Display only Resultrows

Hi,
I have a Question, is it possible only to display the yellow result rows of a query ?
My key figures are dependent from 3 Characteristics, like Partner, Treaty a.o. but I want to see only the Partner and the result row.
Thanks for help,
Karin

Hi,
If you want to display only result values without key figure values, choose properties of the keyfigure and give 'Suppress Result' in the place of "Calculate Single Value As" then you can suppress the keyfigure values.
If you want to display only results with out showing the characteristics, right click the char and give display as 'No Display'.
Vivek.V

Similar Messages

Authorization in BEx Query Designer: "read only" for definitions of variables

Hello,
I`m developing a concept of authorizations for key user who should be able to maintain certain
objects in the query designer. For other objects they should have access “read only”.
The users have authorizations to design new queries. They should be able to use existing variables
(SAP Business Content ( 0*) and customer variables (z*). On this point, I have a problem: in the selection window of the query designer there are only buttons to create, to delete and to edit a variable.
The user must have authorizations for changing, although he just wants to look for the definition
of a variable (if he wants to see their basic or global settings before using the variable).
I can´t find a possibility to switch from “edit” to “read only”.
The users should only see and apply variables from others (SAP, collegues), but he mustn´t be able to
change them.
The user needs the following authorization objects: S_RS_COMP , activity =02 (change), also
authorization object S_RS_COMP1. If I give the users only activity 03 (display),
the user get the message: “display not allowed”.
Is there any possibility to give a key user the authorization to display all variables with
their definitions?
Best regards
Ricarda Seyb

Hi raghukan,
This is may be due to the authorization but still you can check the consistency check for these queries using RSRV.
Regards,
Amit

BEX - Query Designer - Query Execution - IE "The page cannot be displayed'

Hi ALL,
Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
However, when IE pops up to show the result, it says 'The page cannot be displayed'.
It seems the PORT Number is wrong.
When I execute the RSPLAN the port number is 52300 (23 ASCS) (and it works!!).
For this web query the port in URL is 55300 (53 SCS).
Could you help to configure the right port?
Something needs to be done on Basis side configurations?
Thank you,
Nivia

Hi,
This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
But I still have problem:
The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
ERROR partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
The important detail is that The PORTAL works if it doesn't come from BEx.
COULD SOMEONE HELP ME?
Tks,
Nivia

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Difference between aggregation and calculation tab in BEx Query Designer

HI,
I am using BEx Query Designer for my report, for the key figures in the coloumn area i slected one numeric key figures, in the properties tab i found aggregation tab and calculation tab.
I need to sum up the total values for that particualar coloumn, when i used calculation tab i found to sum all the values for a particular coloumn, then what is the use the aggreagation tab?
I not able to used that Aggregation tab it is showing as a hidden fields...
can any one tell me whats the exact difference between these tabs and when we need to use which tab?
With Regards,
Thanesh Kumar.

Hi Thanesh Kumar,
I moved this thread from forum Data Warehousing to Business Explorer since it is a query related question (as SDN moderator).
I could explain to you the difference between these two tabs.
For "calculation" tab, it changes the display of result and does not change the calculation logic.
It means that, if this key figure is used further in formula, still the original number (without "calculation" tab setting) is used for further formula calculation.
For "aggregation" tab, it changes the real calculation logic.
The system takes the setting as the aggregation rule for records.
The most common aggregation rule is of course summation. If you set to e.g. Average here, the system does the
Average instead of summation when aggregating records. And the Average value will be taken for calculation
in further formulas or other calculations.
For "aggregation" tab, you could only use it for CKF (calculated key figure) or formula and you could not use it for
a basic key figure. That should be the reason why you see it greyed-out.
Regards,
Patricia

Usage of formulas in conditions in BEx Query Designer

Hi guys,
does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
Any ideas or are there any bugy in the BEx Query Designer?
Thanks a lot + best regards,
Clemens

Hi Clemens,
I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
1) Condition is marked as Active.
2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
Now you are ready to use the condition.
Regards,
Durgesh.

Doubt on Rows and Coloums in BEx Query Designer.

Hello, Experts.
I have a Doubt in BEx Query Designer.
In the Rows I have a Fiscal year Period, if the user enters the Fiscal year period for e.g. : 001/2006 .
in the columns i have forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ).
My Questions is , as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
Thanks in Advance .
Sharp

yes i am Doing Offest.
I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period . it worked. but
when i kept this in Rows and deleted Previous Fiscal Year period . it is displaying blanks.   in prior years forecast.
is it because i am Ristricting it to only fical year period which user entered
         Colums--> Forcast ( User Entered year )          Prior year
Rows
Fiscal year period
Fiscal year period( user enterd )
Thanks

Values Bifurcation in BEx Query Designer

Dear BI Gurus,
In a column we are getting both positive value and -ve value. We want to bifurcate the values and show only +ve value in one column and show -ve value in another column. Is it possible through Bex query designer?
Please through some light on this issue.
With Regards,
Balachander.S

Hi bala,
This can be achieved by creating two calculated Key figures, Just use else if condition in the formula and use if KF1=KF>0 then KF else 0, here all the positive values will be displayed similarly use if KF2=KF<0 then KF Else 0 it will display all the negative values. But here all the values will be displayed. Just hide the Key figure and display only calculated keyfigures. Else you can use exceptions to differentiate the positive and negative values.
Hope this helps.....
Rgs,
I.R.K

Group by in BEx query designer

Hello experts,
I'm new in BEx query designer and I'm currently working on displaying the maximum of a list of values and group them by calendar day like the exemple below:
CalendarDay
Client
Amount
02.09.2014
A
3000
02.09.2014
B
2000
03.09.2014
A
1500
03.09.2014
B
1600
The result I need to display is as below:
CalendarDay
Amount
02.09.2014
3000
02.09.2014
2000
OverAll result
3000
03.09.2014
1500
03.09.2014
1600
OverAll result
1600
What's the best solution for this ?! is it to work with calculated Key Figure or Exceptions ?! Would any one help me to get such result.
Thanks a lot

If you need to show the data as you mentioned then i think you are suppose to keep client in rows and also you have to switch on the result row display for that characteristic.
Because if you remove it then data will get aggregated based on calday and it will become 2 records only.
To get the maximum value you have to use Exception aggregation.Create a new formula and put the amount kf inside it.Hit the aggregation tab--Exception aggregation as maximum--Reference characteristic as client.
If this does not work then we can also apply nested aggregation based on calday.
Regards,
AL

Message in BEx Query Designer Formula

Hi Experts,
I need to display message based on the value of the formula result. For Example:
If K.F1 =<2.5 Then <Message: ODD>
ElseIF K.F1 >2.5 Then <Message: Even>
Else
<Message: Determine the value>
EndIF
Thease above messages would be build in the formula column of BEx query designer
Thanks and really appreciate your response.
Regards,
Waseem

Hello,
I have done the same funtionality with the help of workbook.
May be experts can guide us how to display messages in the formula column of BEx query designer.
Thanks.
With regards,
Anand Kumar

% Calculactions in Bex Query Designer

Hi Experts,
Could you please on how can i perform the below % Calculactions in Bex Query Designer.
    Vendor No line item Not = L category =A status =RFQ :for items
Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
requament: % RFQ Without Response:
Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
                                                               ( 4/5 * 100= 80%)
Percentage RFQ without response= 100 - Percentage of Quotation response
                                                              = 100-80 = 20%
How can i perform the % Calculations in Bex Query Designer.
Vendor
Purchasing document
Indicator: Line Item
Purch. doc. category
Purch. doc. status
Item
Number of Records
category A item L
200274
V-LINE EUROPE EXPORT MARKETING
6000003778
L
A
Not assigned
10
1
20
1
30
1
6000003779
Not assigned
A
Not assigned
40
1
9000000046
Not assigned
A
RFQ
10
1
1
20
1
1
30
1
1
40
1
1
Result
8
4
thank you

Hope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
Your formulas seems to be straight forward.
Keep in Filter: item Not = L category =A status =RFQ
You may start working on it and get back with if you are struck.

Where to write IF THEN ELASE statements in BEX Query Designer

Hi All,
I need to write a formula in query designer...
saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
where can i write this logic to perform calculation ...
Thanks in advance..
ravi.p

hi chetan,
No its not work.. why because i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there any solution to solve this Problem...

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

Condition (Defintion) in BEX Query Designer

Hi Experts,
I am trying to define a condition in BEX Query Designer.
I defined my condition and bit confused with Characterstic Assignment
What Happens if is select 9What is the difference)
1) All Characterstic in the Drilldown Independtly
2)Most Detailed Characterstic Along the Rows
3)Most Detailed Characterstic Along Columns and
4)Individual Chars and Chars.Combinations
Thanks

Hi,
● All Characteristics in the Drilldown Independently
This setting allows you to apply a condition in a general way. Depending on which characteristics you use in the drilldown, you obtain different results.
Note that the characteristics that are already used in an active condition for characteristic combinations are not included.
This option is optimized for ranked list conditions, but can also be used for threshold value conditions with relative values.
●Most Detailed Characteristic Along the Rows or Columns
This option is optimized for threshold value conditions. The condition is applied to the most detailed characteristic of the rows or columns.
Note that this function is not supported when executing the query in the BEx Analyzer. For more information, see Restrictions in the BEx Analyzer.
● Single Characteristics and Characteristic Combinations
This setting allows you to evaluate the condition for characteristics or characteristic combinations defined for specific drilldowns only. You can select any characteristic (of the characteristics used in the query in rows, columns, or in the free characteristics) or a characteristic combination.
○ If you only want to evaluate the condition when a certain characteristic is present in the drilldown, select this characteristic.
○ If you want to evaluate the condition for characteristic combinations, select multiple characteristics.
Source:
help.sap.com
For more information and examples please check the following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/73/702e39074dc93de10000000a114084/frameset.htm
Hope it helps.

IF...ELSE.. STATEMENT in BEx Query Designer

Hi,
Why there is no IF, ELSE function in BEx Query Designer?
Assuming I need to write the following logic, how can it be accomplished?
IF (A=0 OR B=0)
 THEN 0
ELSE IF ( B/A <0)
 THEN ' *'
ELSE
 B/A * 100
i.e.
if A or B is equal to 0, then display the value of 0
else if B is negative (as A is either 0 or positive), then display the following text: ' *'
otherwise, display the value of B/A * 100
Thanks!

Hi,
You can achieve this by creating a new formula.
You have to use the boolean operations and mathematical functions. But we cannot display *. u have to display some value for that.
Khaja

BEx Query Designer - Display only Resultrows

Similar Messages

Maybe you are looking for