BG Color - can't set opacity percentage

When I set a bg page color @ 75% is looks correct in iweb but when I publish, the color is 100%. Any info?

I've tried pressing "0" on numpad, and it sets my layer to 100% (changes on hotkeys maybe). but it now works.
i used to type 100 on numpad to have it 100%,
numpad is important to me since it's near the position of my mouse..

Similar Messages

Can't set up irssi colors

I'm feeling really... stupid. I just can't set up irssi colors, almost ashame for asking advice on this
Here's my theme (just cloned the default theme):
# When testing changes, the easiest way to reload the theme is with /RELOAD.
# This reloads the configuration file too, so if you did any changes remember
# to /SAVE it first. Remember also that /SAVE overwrites the theme file with
# old data so keep backups :)
# TEMPLATES:
# The real text formats that irssi uses are the ones you can find with
# /FORMAT command. Back in the old days all the colors and texts were mixed
# up in those formats, and it was really hard to change the colors since you
# might have had to change them in tens of different places. So, then came
# this templating system.
# Now the /FORMATs don't have any colors in them, and they also have very
# little other styling. Most of the stuff you need to change is in this
# theme file. If you can't change something here, you can always go back
# to change the /FORMATs directly, they're also saved in these .theme files.
# So .. the templates. They're those {blahblah} parts you see all over the
# /FORMATs and here. Their usage is simply {name parameter1 parameter2}.
# When irssi sees this kind of text, it goes to find "name" from abstracts
# block below and sets "parameter1" into $0 and "parameter2" into $1 (you
# can have more parameters of course). Templates can have subtemplates.
# Here's a small example:
# /FORMAT format hello {colorify {underline world}}
# abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; }
# When irssi expands the templates in "format", the final string would be:
# hello %G%Uworld%U%n
# ie. underlined bright green "world" text.
# and why "$0-", why not "$0"? $0 would only mean the first parameter,
# $0- means all the parameters. With {underline hello world} you'd really
# want to underline both of the words, not just the hello (and world would
# actually be removed entirely).
# COLORS:
# You can find definitions for the color format codes in docs/formats.txt.
# There's one difference here though. %n format. Normally it means the
# default color of the terminal (white mostly), but here it means the
# "reset color back to the one it was in higher template". For example
# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would
# print yellow "foo" (as set with %Y) but "bar" would be green, which was
# set at the beginning before the {foo} template. If there wasn't the %g
# at start, the normal behaviour of %n would occur. If you _really_ want
# to use the terminal's default color, use %N.
# default foreground color (%N) - -1 is the "default terminal color"
default_color = "-1";
# print timestamp/servertag at the end of line, not at beginning
info_eol = "false";
# these characters are automatically replaced with specified color
# (dark grey by default)
replaces = { "[]=" = "%K$*%n"; };
abstracts = {
## generic
# text to insert at the beginning of each non-message line
line_start = "%B-%n!%B-%n ";
# timestamp styling, nothing by default
timestamp = "%K$*%n";
# any kind of text that needs hilighting, default is to bold
hilight = "%_$*%_";
# any kind of error message, default is bright red
error = "%R$*%n";
# channel name is printed
channel = "%_$*%_";
# nick is printed
nick = "%_$*%_";
# nick host is printed
nickhost = "[$*]";
# server name is printed
server = "%_$*%_";
# some kind of comment is printed
comment = "[$*]";
# reason for something is printed (part, quit, kick, ..)
reason = "{comment $*}";
# mode change is printed ([+o nick])
mode = "{comment $*}";
## channel specific messages
# highlighted nick/host is printed (joins)
channick_hilight = "%C$*%n";
chanhost_hilight = "{nickhost %c$*%n}";
# nick/host is printed (parts, quits, etc.)
channick = "%c$*%n";
chanhost = "{nickhost $*}";
# highlighted channel name is printed
channelhilight = "%c$*%n";
# ban/ban exception/invite list mask is printed
ban = "%c$*%n";
## messages
# the basic styling of how to print message, $0 = nick mode, $1 = nick
msgnick = "%K<%y$0%n$1-%K>%n %|";
# message from you is printed. "msgownnick" specifies the styling of the
# nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the
# whole line.
# Example1: You want the message text to be green:
# ownmsgnick = "{msgnick $0 $1-}%g";
# Example2.1: You want < and > chars to be yellow:
# ownmsgnick = "%Y{msgnick $0 $1-%Y}%n";
# (you'll also have to remove <> from replaces list above)
# Example2.2: But you still want to keep <> grey for other messages:
# pubmsgnick = "%K{msgnick $0 $1-%K}%n";
# pubmsgmenick = "%K{msgnick $0 $1-%K}%n";
# pubmsghinick = "%K{msgnick $1 $0$2-%n%K}%n";
# ownprivmsgnick = "%K{msgnick $*%K}%n";
# privmsgnick = "%K{msgnick %R$*%K}%n";
# $0 = nick mode, $1 = nick
ownmsgnick = "{msgnick $0 $1-}";
ownnick = "%_$*%n";
# public message in channel, $0 = nick mode, $1 = nick
pubmsgnick = "{msgnick $0 $1-}";
pubnick = "%N$*%n";
# public message in channel meant for me, $0 = nick mode, $1 = nick
pubmsgmenick = "{msgnick $0 $1-}";
menick = "%Y$*%n";
# public highlighted message in channel
# $0 = highlight color, $1 = nick mode, $2 = nick
pubmsghinick = "{msgnick $1 $0$2-%n}";
# channel name is printed with message
msgchannel = "%K:%c$*%n";
# private message, $0 = nick, $1 = host
privmsg = "[%R$0%K(%r$1-%K)%n] ";
# private message from you, $0 = "msg", $1 = target nick
ownprivmsg = "[%r$0%K(%R$1-%K)%n] ";
# own private message in query
ownprivmsgnick = "{msgnick $*}";
ownprivnick = "%_$*%n";
# private message in query
privmsgnick = "{msgnick %R$*%n}";
## Actions (/ME stuff)
# used internally by this theme
action_core = "%_ * $*%n";
# generic one that's used by most actions
action = "{action_core $*} ";
# own action, both private/public
ownaction = "{action $*}";
# own action with target, both private/public
ownaction_target = "{action_core $0}%K:%c$1%n ";
# private action sent by others
pvtaction = "%_ (*) $*%n ";
pvtaction_query = "{action $*}";
# public action sent by others
pubaction = "{action $*}";
## other IRC events
# whois
whois = "%# $[8]0 : $1-";
# notices
ownnotice = "[%r$0%K(%R$1-%K)]%n ";
notice = "%K-%M$*%K-%n ";
pubnotice_channel = "%K:%m$*";
pvtnotice_host = "%K(%m$*%K)";
servernotice = "%g!$*%n ";
# CTCPs
ownctcp = "[%r$0%K(%R$1-%K)] ";
ctcp = "%g$*%n";
# wallops
wallop = "%_$*%n: ";
wallop_nick = "%n$*";
wallop_action = "%_ * $*%n ";
# netsplits
netsplit = "%R$*%n";
netjoin = "%C$*%n";
# /names list
names_prefix = "";
names_nick = "[%_$0%_$1-] ";
names_nick_op = "{names_nick $*}";
names_nick_halfop = "{names_nick $*}";
names_nick_voice = "{names_nick $*}";
names_users = "[%g$*%n]";
names_channel = "%G$*%n";
# DCC
dcc = "%g$*%n";
dccfile = "%_$*%_";
# DCC chat, own msg/action
dccownmsg = "[%r$0%K($1-%K)%n] ";
dccownnick = "%R$*%n";
dccownquerynick = "%_$*%n";
dccownaction = "{action $*}";
dccownaction_target = "{action_core $0}%K:%c$1%n ";
# DCC chat, others
dccmsg = "[%G$1-%K(%g$0%K)%n] ";
dccquerynick = "%G$*%n";
dccaction = "%_ (*dcc*) $*%n %|";
## statusbar
# default background for all statusbars. You can also give
# the default foreground color for statusbar items.
sb_background = "%4%w";
# default backround for "default" statusbar group
#sb_default_bg = "%4";
# background for prompt / input line
sb_prompt_bg = "%n";
# background for info statusbar
sb_info_bg = "%8";
# background for topicbar (same default)
#sb_topic_bg = "%4";
# text at the beginning of statusbars. sb-item already puts
# space there,so we don't use anything by default.
sbstart = "";
# text at the end of statusbars. Use space so that it's never
# used for anything.
sbend = " ";
topicsbstart = "{sbstart $*}";
topicsbend = "{sbend $*}";
prompt = "[$*] ";
sb = " %c[%n$*%c]%n";
sbmode = "(%c+%n$*)";
sbaway = " (%GzZzZ%n)";
sbservertag = ":$0 (change with ^X)";
sbnickmode = "$0";
# activity in statusbar
# ',' separator
sb_act_sep = "%c$*";
# normal text
sb_act_text = "%c$*";
# public message
sb_act_msg = "%W$*";
# hilight
sb_act_hilight = "%M$*";
# hilight with specified color, $0 = color, $1 = text
sb_act_hilight_color = "$0$1-%n";
It's almost the way I want it, but a couple of things:
- I want everyone nickname but mine in gray
- I want the join/quit text (... has joined/quit) in gray
- I want the mode (@, +, etc) in yellow
I tried to format the text according irssi site, but without luck.
For example tried this to change others nickname color:
pubmsgnick = "{msgnick %y$0%n %K$1%n-}";
pubnick = "%K$*%n";
and this for the quit msg
# mode change is printed ([+o nick])
mode = "{comment %K$*%n}";
# nick/host is printed (parts, quits, etc.)
channick = "%c$*%n";
chanhost = "{nickhost %c$*%n}";
all without any luck. Also tried to put the format strings outside the curly braces, with the same result. I've been editing the config file for a while now, not sure what other information could you possibly need.
I know it's not a big deal, I stil can use the program with no hassle, but it would really be nice to set the colors like that, to help me distinguish between lines.
Thank you for reading, and sorry for my lousy english

Nobody can tell you anything without proper system info or other technical details.
Mylenium

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

Can I set the text color in a Label?

Hi everyone ~
Can I set the font color in PP? I only found that there is a "setBackground".. but I want to set the color within a Label.
Thanks!
Gary

Fixed it!
There was a global style for s|Label and since the Spark button uses one of these for the text, that was it.

How can I set the CS5 to Intuos Pro Large for changing brush size and opacity and others?

How can I set together to my PS5 or Ps6 in order to change brush size and opacity at the Intuos Pro Large?
Nachricht geändert durch Orhan Tarman

The MTU setting on the interface is the layer 3 packet size. In this case, the MTU is set to 1500, but the largest frame size transmitted on the interface (including layer 2 headers) is 1516. It sounds like you are experiencing another problem at the LES.

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

Hi,
Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
Next try changing the settings by selecting the saved preset.
That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

Can't set a component's color!???

Hi,
I can't figure out what I'm doing wrong here:
Scrollbar sb = new Scrollbar(Scrollbar.VERTICAL, 0, 1, 0, 255);
this.add(sb);
sb.setBounds(20, 20, 15, 200);
sb.setForeground(Color.BLACK);
sb.setBackground(Color.WHITE);Ok, well that looks perfectly sensible to me, however the scrollbar doesn't diplay with a balck foreground and a white background - it seems to just completely ignore those two lines of code! What on earth is going on? The documentation (http://java.sun.com/j2se/1.5.0/docs/api/java/awt/Component.html#setForeground(java.awt.Color)) just says " Sets the foreground color of this component". Well, yeah, I figured that it might just do that, but it doesn't seem to!
TIA,
Mike.

Judging by the extent of the documentation, the designers don't say anything about what they consider "foreground" to be! I assumed it was the two little arrow bits and the twiddly bit in the middle of the scrollbar, with the background being everything else in the scrollbar. Perhaps it isn't so.
Phrased another way, my question is, "how do I change the color of the arrows and twiddly bit in the scrollbar, and how do I change the color of the rest of the scrollbar?". I am not fond of the drab grey ...
Thanks,
Mike.

How can i set background color of child window in jdk 1.6

Hi friends i hv devoloped simple java app using javax.swing.JFrame in which on click button event i open new child window using JFrame to draw some image.
i set childs background color as setBackground(Color.lightGray);
but the problem is,child window takse its background color same as its parent window.(i.e. main window's color or desktop ).i get this problem in jdk 1.6.but it is working fine in jdk 1.5.
how can i set background color of child window in jdk 1.6 .
plz solve my problem.
thanks in advanced.

Mo,
Call me old fassioned, but I simply refuse to demangle SMS speak.
You've got a whole keyboard, so learn how to use it.
Keith.

Hi Edge community, How can I set a custom colors

Hi Edge community,
How can I set a custom colors & font size
to the Adobe Edge Animate CC 2014
work space (stage, time lone, tools, etc...)
to get something close to this?
http://www.vrmall.eu/vr/EDGE_WORKSPACE_BLACK_n_WHITE/EDGE_WORKSPACE_BLACK_n_WHITE_r.01.jpg
Thanks a lot for Your time and help.

Hi Robyn_cpl,
thanks for the useful link - based on this I decided to
purchase the PDF of Adobe Edge Animate: The Missing Manual
by Chris Grover. Good book indeed, work space panels resizing
and docking are covered, but there is nothing on colors&fonts...
I've been searching intro's, tut's, forums on Edge, but no hint
on this... But I keep searching You Tube, Google, etc...
I'm intended to submit the subject to Adobe Edge Support.
Thanks again for Your attention

On a chart, can we set portions of a chart with different colors

My application involves with fuel cell conditioning during which the V-I curve with go many cycles. I want to distinguish these cycles with different colors but don't know whether it's doable because I think if we set a color, it will set the whole line with the same color. Or if we can stop the line after one cycle and start the second cycle as a new line, then it will be a new color. Anyone can give some suggestion about how it can work? Thanks in advance.
Guangde

By bundling multiple points together you can get different plots on a waveform graph. And +Inf plots nothing. I attached an example that plots a random number. When the boolean button is switched, it switches to the other plot line, thus another color. This was only done for 2 different colors, but the case structure and the cluster could be expanded for more than 2 colors.
Message Edited by Ravens Fan on 08-24-2007 10:43 PM
Attachments:
Untitled 1.vi ‏14 KB
Example_BD.png ‏12 KB

How can i set color some rows in jtable

hi all,
i have table with two cols one is id and other name
i have array of id, i want set color for only those rows in an array
i tried with the following code but only one row is seting why it is not setting
the other rows? or this is the worg way what i did?
     model      = new DefaultTableModel(data, header);
        table          = new JTable(model){
             int mostUsedCols[] = 151,80,185,90,88,95,137,152,153,181,178,179,180,107};
             public Class getColumnClass(int column)
                    return getValueAt(0, column).getClass();
               public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
                    Component c = super.prepareRenderer(renderer, row, column);
                           int id = Integer.parseInt(tblLedgerAccounts.getModel().getValueAt(row, 0).toString());
                           for(int j=0; j<mostUsedCols.length;j++){
                                c.setBackground( id == mostUsedCols[j] ? Color.LIGHT_GRAY : Color.WHITE );
                    return c;
               }help me to solve this problem
thanks
daya

hello,
thanks,
i have table 2 cols(say for ex) 1st column is name and other one is
id, and i have some array of id's, i need to set the color for these rows
and remainings rows are defalut color (white).
I doubt that you need the
else
c.setBackground( Color.WHITE );if i did't set like this the entire table get gray.
>
since the color should be set to the default by the
super.prepareRenderer(...) method. In fact this code
would override the default row selection coloring.
But maybe I don't understand your requirement. You
notice my original example always to check to make
sure the row is not selected before changing the
background color.here is the demo, i comment this line what will happen c.setBackground( Color.WHITE );
if not doing right than suggest me.
import java.awt.Color;
import java.awt.Component;
import java.util.Vector;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.ListSelectionModel;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.TableCellRenderer;
public class TableColor extends JFrame {
     public TableColor()
          Vector header = new Vector();
          Vector data   = new Vector();
          header.addElement("ID");//0
          header.addElement("Name"); //1
          header.addElement("village"); //2
          Vector v = new Vector();
          v.addElement(new Integer(1));
          v.addElement("daya");
          v.addElement("DVB");
          data.addElement(v);
          Vector v1 = new Vector();
          v1.addElement(new Integer(2));
          v1.addElement("raju");
          v1.addElement("DVBs");
          data.addElement(v1);
          Vector v2 = new Vector();
          v2.addElement(new Integer(3));
          v2.addElement("James");
          v2.addElement("sdf");
          data.addElement(v2);
          Vector v3 = new Vector();
          v3.addElement(new Integer(4));
          v3.addElement("Naga");
          v3.addElement("DVBsadf");
          data.addElement(v3);
          Vector v4 = new Vector();
          v4.addElement(new Integer(5));
          v4.addElement("xyz");
          v4.addElement("asdf");
          data.addElement(v4);
        DefaultTableModel tblModLedgerAccounts      = new DefaultTableModel(data, header);
        JTable tblLedgerAccounts          = new JTable(tblModLedgerAccounts){
             int mostUsedCols[] = {2,4,5};
             public Class getColumnClass(int column)
                    return getValueAt(0, column).getClass();
               public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
                    Component c = super.prepareRenderer(renderer, row, column);
                           int id = Integer.parseInt(getModel().getValueAt(row, 0).toString());
                           for(int j=0; j<mostUsedCols.length;j++){
                                if(id == mostUsedCols[j]){
                                     c.setBackground(Color.lightGray);
                                     break;
//                                else
//                                     c.setBackground(Color.WHITE);
               return c;
          JScrollPane scrollPaneLedgerAccounts =     new JScrollPane(tblLedgerAccounts);
          tblLedgerAccounts.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
          this.getContentPane().add(scrollPaneLedgerAccounts);
          setVisible(true);
          pack();
          setTitle("Table Color");
          setDefaultCloseOperation(EXIT_ON_CLOSE);
     public static void main(String args[]){
          new TableColor();
}thanks
daya

How can I set a default zoom for the browser (freeze it)?

Hello, there's an option of using the Ctrl + + to zoom the Web page, but it reverts to the Firefox default zoom in the midst which is very annoying. Generally, I'd like to be able to set a certain default zoom level and then only if needed use the CTRL +/- zoom in and out options. So my optimal zoom level is used for all my browsing unless I change it.

I have listed 2 add-ons below for you to consider. I have not used NoSquint, but I use and rely on Default FullZoom Level.
*You can set a default zoom level in DFZL Options
*You can use the mouse scroll wheel on the Add-on Bar DFZL icon to increase or decrease the zoom or click the icon and choose from the available zoom percentages.
*In NoSquint, it says it saves the zoom level by web site/page.
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
You can also set a "Minimum Font Size" in Firefox Options > Content > Fonts & Colors Advanced".
*See --> [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Content%20panel#w_fonts-colors Options window-Content panel-Fonts & Colors]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Please guide me how PMS Colors can be done in DUOTONE?

Hello,
Good Day
I have job having 7 Colors and I have been asked to done it in 5 Colors.
(1) Pantone 485CVC (RED)
(2) Pantone 356CVC (GREEN)
(3) Pantone 116CVC (YELLOW)
(4) Pantone 301CV (D-BLUE)
(5) Pantone 279C (L-BLUE)
(6) Pantone 732C (D-BROWN)
(7) Pantone 730C (L-BROWN)
I can use Red, Green and Yellow on separate screens where as remaining
“FOUR COLORS” are Dark Blue, Light Blue, Dark Brown and Light Brown.
Please guide me how I can finish the job in five colors as my boss advised
me to do it in duotone. The job is on Illustrator CS2 and Colors are PMS.
Please guide me how PMS Colors can be done in DUOTONE.
I have been working in filled of screen print for many years but unaware
about duotone in Illustrator.
I would sincerely grateful for your reply and Guidance.
With Best Regards
Ahmed Ali
[email protected]

Since this is (evidently) being prepared for screen printing, your options will be affected by answers to these questions:
Are halftone dots going to be allowed? Screen printing setups (especially in common T-shirt shops) often require solids only.
If the screen printing setup can accommodate halftoning, at what halftone ruling? When a particular screen printing setup is limited to very course (ugly) halftone ruling--commonly 30 lpi or less--one often opts for textures or grain to achieve the effect of shading.
Are the inks going to be opaque? Opaque inks are most common, but limit the possible results when overlapped. Translucent inks are only suitable for white or very light substrate colors. If the screen setup is sophisticated enough to support decent halftone ruling, and will be printed on a white substrate, then the colors you have listed could be accomplished simply building the file as ordinary four-color process, instead of with 5 colors. (None of the colors you've listed—red, green, yellow, two blues, two browns—suggest requiring a 5th spot ink.)
Illustrator does not support multi-ink swatches. You can use multiple fills and/or strokes set to overprint to replicate it in output. But Illustrator cannot properly display overprinting of opaque inks in its interface. Overprint preview always assumes the translucent inks of offset printing.
All the above is why it is common to build screen printing projects in Photoshop as multichannel documents, saved as DCS 2 EPS, or printed to Adobe PDF as separations. It's more intuitive because you have a Channel (not to be confused with Layers) for each ink, and the program is able to properly preview the printed results because you can simulate opacity, including the color of the substrate.
Working this way, it is common to create vector objects in Illustrator and then paste them into the appropriate Channel in Photoshop.
...my boss advised me to do it in duotone...
I suspect your boss doesn't know what a duotone is. Duotone (and tritone, quadtone) print multiple separations of the same grayscale channel. Duotone in Photoshop is the modern analog of the process darkroom technique of making two separation plates from the same image, using different screen angles and exposures. In Photoshop, you can do this for up to four inks, optionally applying different grayscale curves to each ink, not different channels (different artwork) to each ink. Traditionally, this was done to impart a bit of "color interest" to black-and-white photos being printed in a 2-ink job.
Your boss is saying "duotone," but he's thinking of the functionality of a multichannel file using spot inks. Even Photoshop's quadtone would not give you five inks.
JET

[MapViewer] can not set stroke width

hi
I am using MapViewer API. I will add dynamically Sytles with addColorStyle.
How can i set the value for stroke width.
I can only set the stroke color and stroke opacity.
best regards
mathias °ö°

Hi Mathias,
you can create Color objects with alpha value and use them on ColorStyleModel. For example:
Color fill = new Color(255,0,0,100);
Color stroke = new Color(0,0,0,255);
ColorStyleModel cmodel = new ColorStyleModel();
cmodel.setFillColor(fill);
cmodel.setStrokeColor(stroke);
float strokeWidth = 2f;
cmodel.setStrokeWidth(strokeWidth);Joao

How Can I set up a JTable columns?

Dear All,
How can I set up my JTable columns to have the amount the user specifies?
for example when the user types in 50 in JTextField 1 I want the JTables columns to then set to 50.
How can this be done?
Thanks
lol
import javax.swing.*;
import javax.swing.table.TableModel;
import java.io.*;
import java.util.*;
import java.lang.*;
import java.awt.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
public class si1 extends javax.swing.JFrame implements ActionListener {
    JTextField name = new JTextField(15);
    JTextField name1 = new JTextField(15);
    public si1() {
        super("DataBase Loader");
        setSize(1025,740);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel pane = new JPanel();
        JPanel pane1 = new JPanel();
        JPanel pane2 = new JPanel();
        JPanel pane3 = new JPanel();
        JPanel pane4 = new JPanel();
        pane.setLayout(new GridLayout(20,1));
        pane1.setLayout(new BorderLayout());
        int j=10;
        String[][] data = new String[j][2];
        for (int k=0; k<j; k++){
           String[] row = {"",""};
           data[k] = row;
        String[] columnNames = {"First Name", "Last Name"};
        JTable perstab = new JTable(data, columnNames);
        perstab.setGridColor(Color.yellow);
        perstab.setPreferredScrollableViewportSize(new Dimension(500,500));
        JScrollPane scrollPane = new JScrollPane(perstab);
        pane1.add(new JPanel(), BorderLayout.EAST);
        JButton btn = new JButton("What are the names?");
        btn.addActionListener(this);
        btn.putClientProperty("DATABASE", perstab);
        pane1.add(new JPanel().add(btn), BorderLayout.SOUTH);
        pane2.add(name);
        pane3.add(name1);
        pane.add(pane2);
        pane.add(pane3);
        pane1.add(pane, BorderLayout.WEST);
        pane4.add(scrollPane);
        pane1.add(pane4, BorderLayout.CENTER);
        setContentPane(pane1);
        show();
    public static void main(String[] args) {
        si1 frame = new si1();
        frame.setVisible(true);
    public void actionPerformed(ActionEvent e) {
        JTable table = (JTable)((JButton)e.getSource()).getClientProperty("DATABASE");
        TableModel model = table.getModel();
        int count = model.getRowCount();
        String[] firstnames = new String[count];
        String[] lastnames = new String[count];
        for (int i=0; i < count; i++) {
           firstnames[i] = (String)model.getValueAt(i, 0);
            System.out.println("first name at row " + i + ": " + firstnames);
lastnames[i] = (String)model.getValueAt(i, 1);
System.out.println("lastname name at row " + i + ": " + lastnames[i]);

As you can see I have tried this, but no success.
If I am doing something wrong please accept my apology, and address me in the right direction.
Thanks
Lol
import javax.swing.*;
import javax.swing.table.TableModel;
import java.io.*;
import java.util.*;
import java.lang.*;
import java.awt.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
public class si1 extends javax.swing.JFrame implements ActionListener {
    JTextField name = new JTextField(15);
    JTextField name1 = new JTextField(15);
    public si1() {
        super("DataBase Loader");
        setSize(1025,740);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel pane = new JPanel();
        JPanel pane1 = new JPanel();
        JPanel pane2 = new JPanel();
        JPanel pane3 = new JPanel();
        JPanel pane4 = new JPanel();
        pane.setLayout(new GridLayout(20,1));
        pane1.setLayout(new BorderLayout());
        int j=10;
        String[][] data = new String[j][2];
        for (int k=0; k<j; k++){
           String[] row = {"",""};
           data[k] = row;
        String[] columnNames = {"First Name", "Last Name"};
        JTable perstab = new JTable(data, columnNames);
     ((DefaultTableModel)perstab.getModel()).setColumnCount(Integer.parseInt(name.getText()));
        perstab.setGridColor(Color.yellow);
        perstab.setPreferredScrollableViewportSize(new Dimension(500,500));
        JScrollPane scrollPane = new JScrollPane(perstab);
        pane1.add(new JPanel(), BorderLayout.EAST);
        JButton btn = new JButton("What are the names?");
        btn.addActionListener(this);
        btn.putClientProperty("DATABASE", perstab);
        pane1.add(new JPanel().add(btn), BorderLayout.SOUTH);
        pane2.add(name);
        pane3.add(name1);
        pane.add(pane2);
        pane.add(pane3);
        pane1.add(pane, BorderLayout.WEST);
        pane4.add(scrollPane);
        pane1.add(pane4, BorderLayout.CENTER);
        setContentPane(pane1);
        show();
    public static void main(String[] args) {
        si1 frame = new si1();
        frame.setVisible(true);
    public void actionPerformed(ActionEvent e) {
        JTable table = (JTable)((JButton)e.getSource()).getClientProperty("DATABASE");
        TableModel model = table.getModel();
        int count = model.getRowCount();
        String[] firstnames = new String[count];
        String[] lastnames = new String[count];
        for (int i=0; i < count; i++) {
           firstnames[i] = (String)model.getValueAt(i, 0);
            System.out.println("first name at row " + i + ": " + firstnames);
lastnames[i] = (String)model.getValueAt(i, 1);
System.out.println("lastname name at row " + i + ": " + lastnames[i]);

BG Color - can't set opacity percentage

Similar Messages

Maybe you are looking for