BI 7.0 Routine URGENT

hi
i have a big problem here in my GO LIVE.
i have thease field coming from R/3.
0pruduct                             level
0001                                    1
00010001                             2
000100010001                      3
000100010001000001           4
00010002                            2
0002                                   1
00020001                             2
000200010001                       3
00020001000100001              4
000200010002                      3
00020001000200001               4
00020001000200002              4
i have created for more object in biw and want to send level wise product to them
like (level wise product to the field
level1            evel2                level3          level4
0001            00010001   000100010001   000100010001000001
i donot know abap please help me. send me the code or any thing.
my client wand to se hierarchy effect in the report.
my id is -- [email protected]
regards,
Mangra

Check if this helps.
https://forums.sdn.sap.com/click.jspa?searchID=3860283&messageID=3482341
Message was edited by:
Manga Paidikondala

Similar Messages

Abap Routine(Urgent)

Hi All,
I have a requirment i,e for example i got a infoobject named product and the data for that product is cumin as ABCD,but in the target it should be passed as CD by supressin AB in transformation.
So in wot way i can achevie this ,by field routine,formula or start and end routine.
Please let me know ASAP
Thanks
Bobby

Hi Bobby,
As i understood you have product and txt field in your source and you want txt field get populated in target.
If yes then why you need to map 2 fields ?
Is their is some condition you need to check .If yes you can try something like this :
ex:
here if product is 200 and txt is ABCD in you target you will have value CD .
if source_fields-product = 200 .
result = source_fields-txt+2 .
endif .
Otherwise directly put value :
result = source_fields-txt+2 .
Refer this doc :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/609eea32-455e-2c10-c08a-c23adf8c934e?QuickLink=index&overridelayout=true
http://help.sap.com/saphelp_nw70/helpdata/en/43/bcdb7801344defe10000000a422035/content.htm
Regards,
Jaya Tiwari

Urgent help required to write the code in update routine

Hi all,
i want to calculate open purchase order qty in update routine
formula is
open purchase order qty = scl qty - rec qty
where schd line date is less then or equal to 90 days from the current date.
I have written one code : but its giving error that comm_structure is not defined in abap dictionary,can any body help to write appropriate routine. this calculation i am making for MM, and data source and cube are 2lis_02_scl and cube is zc_pur01 ( made by coping the 0pur_c01), data source scl has all fields required in the foumula...here is my code
DATA: COMM_STRUCTURE LIKE /BIC/CS2LIS_02_SCL.
DATA: SCL_QTY LIKE COMM_STRUCTURE-/BIC/ZK_SCLQTY.
DATA:      GR_QTY LIKE COMM_STRUCTURE -/BIC/ZK_GRQTY.
DATA: SCL_DATE.
SCL_DATE = SY-DATUM + 90.
SELECT COMM_STRUCTURE -/BIC/ ZK_SCLQTY COMM_STRUCTURE -/BIC/ ZK_GRQTY FROM
/BIC/CS2LIS_02_SCL INTO   SCL_QTY     GR_QTY
WHERE
COMM_STRUCTURE -/0SCHED_DATE LE SCL_DATE.
IF SYSUBRC = 0
RESULT = SCL_QTY - GR_QTY.
ELSE = NOVALUE.
ENDIF.
Can any body help me soon its very urgent.
thanks

Hi Anupam,
I am not a very good ABAP Programmer, but found some things to notify u inyour code..
DATA: COMM_STRUCTURE LIKE /BIC/CS2LIS_02_SCL,
      SCL_QTY LIKE COMM_STRUCTURE-/BIC/ZK_SCLQTY,
      GR_QTY LIKE COMM_STRUCTURE -/BIC/ZK_GRQTY.
DATA SCL_DATE LIKE SY-DATUM.
SCL_DATE = SY-DATUM + 90.
SELECT COMM_STRUCTURE -/BIC/ ZK_SCLQTY COMM_STRUCTURE -/BIC/ ZK_GRQTY FROM
/BIC/CS2LIS_02_SCL INTO SCL_QTY GR_QTY
WHERE
COMM_STRUCTURE -/0SCHED_DATE LE SCL_DATE.
IF SYSUBRC = 0
RESULT = SCL_QTY - GR_QTY.
ELSE.
What should be the return value if you dont have to    calculate the result."
ENDIF.
try it.. and see..
regards,
kishore.

How to write code for this logic in a routine, very urgent --help me

hi all,
i want to apply this logic into one subroutin ZABC.
here i m giving my logic ,can any body help me in coding for this, this is very urgent, i hv to submit on wednesday.
4.1 Read the company code number BSEG-BUKRS from document line item.
4.2 Fetch PRDHA from MARA into GV_PRDHA where MATNR = BSEG-MATNR.
4.3 Fetch Business area (GSBER) from ZFIBU into GV_GSBER where (PRDHA = GV_PRDHA and BUKRS = BSEG-BUKRS) OR (PRDHA = GV_PRDHA and BUKRS = SPACE).
4.4 If business area match is found, go to step 3.9. Else continue.
4.5 If BKPF-BLART IN set ZVS_POSDT OR BKPF-XBLNR starts with I0*, execute steps below. Else, go to Step 3.6.
i. MOVE: BSEG-BKURS TO work area field WA_ZFIBUE-BUKRS,
BSEG-MATNR TO work area field WA_ZFIBUE-MATNR,
GV_PRDHA TO work area field WA_ZFIBUE-PRDHA,
BSEG-HKONT TO work area field WA_ZFIBUE-HKONT,
BSEG-GSBER TO work area field WA_ZFIBUE-GSBER,
BSEG-PSWBT TO work area field WA_ZFIBUE-PSWBT,
BKPF-BUDAT TO work area field WA_ZFIBUE-BUDAT,
SY-DATUM TO work area field WA_ZFIBUE-CREDATE,
SY-UZEIT TO work area field WA_ZFIBUE-CRETIME,
Fetch running serial number (WA_ZFIBUE-SERIALNO) from ZFICO. This number will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "ZFIBUE" and KEY1 = "SERIALNO". The actual serial number will be stored in the field VALUE1.
i. Insert WA_ZFIBUE INTO ZFIBUE.
ii. Send email notification to the user (if it is not already sent to user on the same posting date).
Use function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
Fetch email address and date of last email from ZFICO. These values will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "EMAIL" and KEY1 = "<USERNAME>". The email address will be stored in the field VALUE1 and posting date in VALUE2. Once mail is sent, VALUE2 is updated with latest posting date (BKPF-BUDAT).
iii. Increment the running serial number and update ZFICO with new serial number.
a. GV_ SERIALNO = WA_ZFIBUE-SERIALNO + 1
b. Update ZFICO Set value1 = GV_SERIALNO
Where PARAMTYPE = "BPM030307" AND
SUBTYPE = "ZFIBUE" AND
KEY1 = "SERIALNO".
iv Move VDFT to BSEG-GSBER.
v. Exit routine.
4.6 Fetch MTART into GV_MTART from MARA where MATNR = BSEG-MATNR.
4.7 If SY-BATCH = INITIAL AND GV_MTART <> ROH, issue the error message - Maintain the mapping of product hierarchy <PRDHA> from article <MATNR> for <BUKRS>. Else, go to step 3.8.
4.8 If SY-BATCH <> INITIAL AND GV_MTART <> ROH, issue the error message - Maintain product hierarchy on article master. Go to step 3.10.
4.9 Move GV_GSBER TO BSEG-GSBER.
4.10 Exit Routine
plz give me reply asap --this is very urgent
thanks in advance
swathi

Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

Update Routine ... Help me Please--VERY URGENT

Hi All ,
I Moving data from Cube to ODS . Let me explain abt the records in the cube .
There are 6 key figures in the cube as well as dimensions, UNIQKEY TRANSACTION is One Dimension and ARTICLE is another dimension which is having an Navigational attribute called CORE ELEMENT.
I am showing the data with those two dimension and the key figures which are to be used in the routine.
Charc----
Key Figures
UNIQKEY-ARTICLE-Coreelement--
billqty
in base unit
A00N----1006330--1--
10.5
A00M -
1006320----2--
2.5
A00P-----1006330--1--
10.5
A00P-----1006320--2--
2.5
A00Q-----1006320--2--
2.5
A00Q-----1006340--3--
10.5
Now Lets see what the core element numbers mean,
core element 1 means -- fuel .
Core elemnet other 1 -- food .
I need to move these data into ODS Which will have an extra field called No of items in the transaction --ITEMS.For this i need to write a routine .
The Logic is ...
1.if Materail is of type 1(Means if the core element - 1)
I need to Populate the No of items in tnx = 1 .--ITEMS.
2.If Material is of type(Means if the core element)2or 3 I need to populate the billing quantity to the no of transcations.--ITEMS
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1 (replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the Transcation= 3
So the ODS Data should look like this.
UNIQKEY--billqty--
ITEMS
in base unit
A00N--10.5--
1
A00M--2.5--
2.5
A00P--13--
3.5
A00Q--13--
12.5
NOTE : IN the ODS only the UNIQKEY IS THE KEY FIELD and the rest are DATA FIELDS.
I Posted this one before also. But didnt get proper responses.
I am Pasting the piece of code which I have written . This code will work for the first two records in the cube , But it is failing for the UNIQKEY Transcation having Line items.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
 CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
 RETURNCODE LIKE SY-SUBRC "Do not use!
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
 INTO CORE_ELEMENT
 from /BI0/PMATERIAL
 where
 material = COMM_STRUCTURE-material
 and OBJVERS <>'D'.
 IF CORE_ELEMENT EQ '1'.
 TITEMS = '1'.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
 EXPORTING
 input = titems
 IMPORTING
 OUTPUT = titems
 ELSE.
 TITEMS = COMM_STRUCTURE-BILL_QTY.
 ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
PLease give me ideas on how to acheive this . As I am not Aware of ABAP very well.. PLease try to give me the code. I hope one of you may got the same requirement before.
Its very urgent and I need to deliver it today itself.
Thanks in advance , you can mail me to [email protected]. If anybody intersted to discuss this Issue they can reach at +91 9845922955.

Hi ,
While I am moving the data from cube to ods . I need to create the update rules with cube -- 8cube . WHen i am doing this the billqty is a key figure in cube so that is not a problem but the ITEMS is not there in the cube ,SO for that I need to write a routine to populate that one.
Its strange but the user what to analyse with the UNIQKEY transaction. And these objects will be added as navigational attributes to the Characteristic. as it acts as another dimension.
He wants to laod these from ODS to Master data -Characteristic.
to say for each transcation hpw many items are getting sold.
Message was edited by: Nagarjuna Reddy
ONce again thanks for the qucik replies
Message was edited by: Nagarjuna Reddy

UPDATE ROUTINE --- CUBE --- ODS Very Very URGENT

Hi Collegues/Friends ,
First I need to thank for the intiators of this site , as I came to know that for many
problems we will get different best solutions ... Hoping the same I am posting a question
which is very very very urgent as the client is running after me for this .
My Requirement is as Follows. ..
I Moving the data from Cube to ODS . While i need to write a routine for an extra field in
ODS based on Billing Quantity in Base Unit of Measure . The Key Field in the ODS Is UNIQKEY
Transaction and It is a Characterstic in the Cube and we have MAterial as another
Characteristic and core element as navigational attribute .
In the Cube for every UNIQKEY transaction- there are more than One line items.
My data fields in the ODS are Billing Quantity in Base Unit of MEasure and and EXTRA FIELD
: No of Items in Transaction . But the thing is that I have only Billing Quantity in Base
Unit of Measure in cube as a key figure
BAsing on the UNIQKEY transcation and Billing Quantity In Base Unit Of Measure I need to
populate the No of Items in Transaction... For this i need to write a routine .
Let suppose say that for the Materials the core elements are as follows
Material Core element
10 1 -- fuel -- In liters
20 2 -- Cigar - in PAck
30 3 -- Coke - in Cans
Now Lets see how the records are there in InfoCUbe
Uniqkey / Material / Core element /Billin Quantiy
A / 10 / 1 / 22
B / 30 / 3 / 2
C / 10 / 1 / 15
C / 30 / 3 / 2
D / 20 / 2 / 10
D / 30 / 3 / 2
And IN the ODS -- I need to Populate the No OF items in Transaction.
the Logic behind this as follows .
1.if Materail is of type 1(Mean if the core element - 1)
I need to Populate the No of items in tnx = 1
2.If Material id of type 2 or 3 I need to populate the billing quantity to the no of
transcations.
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of
fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing
Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line
item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1
(replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the
Transcation = 3
For this I have Written a Rouinte like this for that field
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
 CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
 RETURNCODE LIKE SY-SUBRC "Do not use!
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
 INTO CORE_ELEMENT
 from /BI0/PMATERIAL
 where
 material = COMM_STRUCTURE-material
 and OBJVERS <>'D'.
 IF CORE_ELEMENT EQ '1'.
 TITEMS = '1'.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
 EXPORTING
 input = titems
 IMPORTING
 OUTPUT = titems
 ELSE.
 TITEMS = COMM_STRUCTURE-BILL_QTY.
 ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Does it satisfy all the conditions ?? mentioned above if . As far As i know as the only key
field in the transcation it will satisfy the first two conditions .
I want to know or If possioble anybody pls take some pain for me to send the code or any
Ideas for satisfying all the conditions.
Hope I will get immediate replies....
Mail me to [email protected]

Reddy,
Please do not post in all sections ... makes it hard to follow up on posts..
Arun

Output routine fails but still output is issued....Urgent

I have an output routine attached to a output type which generates IDOC. There are different conditions placed in the routine under which SY-SUBRC is made either 4 or 0.
In one of the cases Sy-subrc is 4 but still output is issued and IDOC is generated...
My question is even though output routine is not fulfilled is there a chance of output getting issued on the document ???
Need you help urgently..........

Hi,
Yes the IDOC will be triggered with the different status.
Regards,
Sharath

Routine in Bex - urgent pls.

I have 2 columns A and B in the report:
A B C
1234 1234 1234
5903 0 5903
0 3287 3287
I want to get the column C.
So, the condition for the column C would be :
if A<>0 and B <>0 then A
else if A==0 then B
else if B==0 then A
I heared that this can be done by routines . I need the code to do this . Also let me know where to put the code.
This is urgent pls.
Vaishali

Hi,
No need to write coding.....directly u can get these by unsing formula as told in the above forum....there u get all these conditions in Boolean operators. so just make use of them..
Thanks & Regards

How to call external Perl routines from Pl/SQL - Urgent

Available software in the Test Environment:
1. Sun Unix 2.8
2. Oracle 8.1.7 ( 8i)
3. Perl 5
Iam trying to call/execute perl scripts from PL/SQL using the DEMO_RDBMS.mk. I am able to call C scripts from PL/SQL, but actually want to call Perl scripts.
The steps followed for for C are -
1. Create and compile a simple C program to execute a unix command (eg., touch a file).
2. Make a shared library of the above compiled program (object), i.e., load the compiled object module into a dynamic load library.
3. Declare the above library in Oracle using SQL*Plus.
4. Define a PL/SQL function or procedure to call the external routine.
5. Test the external routine.
The above steps run good for a C program, but step 2 fails when run for a Perl script.
When I tried to use the following command for step 2 -
make -f $ORACLE_HOME/rdbms/demo/demo_rdbms.mk extproc_callback \
SHARED_LIBNAME=cmd_lib.so \
OBJS=tst_cmd.pl
got the following error -
ld: fatal: file tst_cmd.pl: unknown file type.
ld: fatal: File processing errors. No output written t cmd_lib.so
*** Error code 1
This gives me an indication that demo_rdbms.mk does not understand/interpret Perl scripts. Going through the demo_rdbms.mk suggests the same.
My questions is - How do we call external Perl scripts/routines from PL/SQL ??
Do I have to get a different version of "demo_rdbms.mk" ?
PS: The perl scripts used above (tst_cmd.pl) is error free and works as intended in the unix environment.

Iam trying to call/execute perl scripts from PL/SQL using the DEMO_RDBMS.mk. I am able to call C scripts from PL/SQL, but actually want to call Perl scripts. Well, C is a "compiler" language and Perl is interpreted. In a sense, C is not "scripts".
When I tried to use the following command for step 2 -
make -f $ORACLE_HOME/rdbms/demo/demo_rdbms.mk extproc_callback \
SHARED_LIBNAME=cmd_lib.so \
OBJS=tst_cmd.pl
got the following error -
ld: fatal: file tst_cmd.pl: unknown file type.
ld: fatal: File processing errors. No output written t cmd_lib.soI guess this compiles an extproc "stub" with your object file, generating an external procedure. So the object file really needs to be an object file :-)
My questions is - How do we call external Perl scripts/routines from PL/SQL ??I'd guess you need an embedded Perl interpreter in the external procedure.
Not much help though I'm afraid :-/
Cheers
Fredrik

URGENT: How to find out the Tables for Routines in BW.

Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id 45XFAEI7LKIFIRDUKQG127YWW and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.

Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen.

Urgent !!! Need help in modifying routine in transformation?

Hi
I am using following routine in a transformation for Location number characteristic.
    data: lv_country type /BIC/PZCUSTOMER-country.
    select single country
      into lv_country
      from /BIC/PZCUSTOMER
      where /BIC/ZCUSTOMER = SOURCE_FIELDS-CUSTOMER and
            objvers = 'A'.
    if sy-subrc = 0.
      RESULT = lv_country.
    endif.
The modification is
a.       Currently the ZLOCNO is set to be the country of demand, This is what I need it to be:
   i.      IF   Company Code = 70, then set ZLOCNO = VS,
           ELSE    set ZLOCNO = ZLOCNO__0COUNTRY from the ZLOCNO characteristics. Use the county code from the existing routine for lookup.
Please help me out to write a routine for this

Hi,
In 7.0, global declaration of start routine will be in a specific place. Declare the variable under this part in the start routine.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line   -
Vivek

Urgent : Doubt in writing a code in start routine

Hi all ,
             I am BI 7.0 system , I have doubt in writing a code in start routine .
1) i have to extract the data first from a custom table based on one condition and then placing it into internal table .
2) Now i have to loop at source_package for a particular region field say "ASIA". with this result i have to check for the correponding entries in custoom table .
   if condition is not true (i.e ) with entries or not matching then delete that particular record from source_package.
i have written a small logic for this . but this is producing any ouput , Please check it and also let me know for modifications .
thanks in advance.
select * from zcsp
    into corresponding fields of TABLE itab_T
    where
    ZBUSINESSUNIT = 'BC'.
loop at SOURCE_PACKAGE into ls_SOURCE_PACKAGE where /BIC/DPREGION = 'XE'.
             loop at itab_t into itab_w where zcategory =
               ls_source_package-/BIC/DPMAT/BIC/DPCAT.
                   if sy-subrc ne 0.
                     delete SOURCE_PACKAGE.
                   endif.
           endloop.
       endloop.

You're deleting the entire input package. You only want to delete the one row.
DATA: g_tabix TYPE sy-tabix.
SELECT * FROM zscp
INTO CORRESPONDING FIELDS OF TABLE itab_t
WHERE zbusinessunit = 'BC'.
SORT itab_t BY zcategory.
LOOP AT source_package INTO ls_source_package WHERE /bic/dpregion = 'XE'.
g_tabix = sy-tabix.
READ TABLE itab_t WITH KEY zcategory = ls_source_package-/bic/dpmat/bic/dpcat TRANSPORTING NO FIELDS BINARY SEARCH.
IF sy-subrc NE 0.
    DELETE source_package INDEX g_tabix.
ENDIF.
ENDLOOP.

URGENT ** ABAP ROUTINE HELP

Hi gurus,
             I am write a ABAP routine to fetch G/L acount form zpur_acc DSO for a joining consition of PO # and line item #.
I am not etting the desired result. Can some one please lookinto the code and debug it.
Here I am reading OI_EBELN and OI_EBELP from the incoming data but since I am in BI7.0 how can I use info object (OI_EBELN , OI_EBELP) directly or it should be referenced via communication structure-filed name? What is the name of communication structure in Bi 7.0?
data: wa_tab type /BIC/AZPUR_ACC00.
select single * into wa_tab from /BIC/AZPUR_ACC00
where
OI_EBELN = wa_tab-OI_EBELN
and
OI_EBELP = wa_tab-OI_EBELP.
*and objvers = 'A'.
result = wa_tab-GL_ACCOUNT.
Warm Regards,
Anil

METHOD compute_0GL_ACCOUNT.
IMPORTING
    request     type rsrequest
    datapackid type rsdatapid
   EXPORTING
     RESULT type tys_TG_1-GL_ACCOUNT
    DATA:
      MONITOR_REC    TYPE rsmonitor.
$$ begin of routine - insert your code only below this line        -
... "insert your code here
*-- fill table "MONITOR" with values of structure "MONITOR_REC"
*-   to make monitor entries
data: wa_tab type /BIC/AZPUR_ACC00.
select single * into wa_tab from /BIC/AZPUR_ACC00
where
OI_EBELN = wa_tab-OI_EBELN
and
OI_EBELP = wa_tab-OI_EBELP.
*and objvers = 'A'.
*result = wa_tab-GL_ACCOUNT.
... "to cancel the update process
   raise exception type CX_RSROUT_ABORT.
... "to skip a record
   raise exception type CX_RSROUT_SKIP_RECORD.
... "to clear target fields
   raise exception type CX_RSROUT_SKIP_VAL.
     RESULT = wa_tab-GL_ACCOUNT.
$$ end of routine - insert your code only before this line         -
ENDMETHOD.                    "compute_0GL_ACCOUNT

Urgent: ABAP routine in transfer rules

Hi,
when i am loading master data from R/3 into BW, i need to filter some records based on material type. there is no option in RSA6 (on R/3) or in Infopackage (BW) to make it available for filter.
So i assume i need to write ABAP routine in transfer rules. can some one help me with ABAP. i need to load the records only when MTART field(material type) in MARA is "FINI" or "RAW" and skip other records.
what is difference between deleting the whole data packet and deleting the record.
Thank you very much in advance
Regards
Emil

Hi
Write the below code in the start routine of your transfer rules.
Regards
Prakash
DATA: IT_DATA        TYPE STANDARD TABLE OF TRANSFER_STRUCTURE
                     WITH HEADER LINE
                     WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
DATA: S_DATA, T_DATA TYPE TRANSFER_STRUCTURE.
LOOP AT DATAPAK INTO S_DATA.
IF S_DATA-MTART EQ 'A' OR S_DATA-MTART EQ 'B'.
MOVE S_DATA TO T_DATA.
DELETE S_DATA.
ELSE.
DELETE S_DATA.
ENDIF.
APPEND T_DATA TO IT_DATA.
ENDLOOP.
CLEAR T_DATA.
DATAPAK[] = IT_DATA[].
Assigning points is a way of saying thanks on SDN!!

Urgent: Problems with filters with routines in DTP

Hi All.
I have this: ODS --> Transformation --> InfoCube
I've created a "full" DTP which has a routine in the filters because I need to calculate the from-to date in a routine.
The InfoObject in the ODS is: 0CREATEDON
It has no errors. I activate the DTP successfully but when I execute IT get que following errors:
3 - Incorrect initial value for characteristic 0CREATEDON in i_t_range (The description below)
 Incorrect initial value for characteristic 0CREATEDON in i_t_range
 Message no. DBMAN889
 Diagnosis
 The specified characteristic is of type NUMC (number as character), DATS (date), or TIMS (time). The initial value of ' ' is incorrect for these data types.
 System Response
 The call is terminated.
 Procedure
 Use the correct initial value for the type in the selection condition
This routine has worked successfully in an InfoPackage
Here is the routine code:
form compute_CREATEDON
tables l_t_range structure rssdlrange
changing p_subrc like sy-subrc.
 Insert source code to current selection field
$$ begin of routine - insert your code only below this line -
DATA: l_idx like sy-tabix.
*DATA: FECHA_L LIKE SY-DATUM,
 FECHA_H LIKE SY-DATUM.
DATA: FECHA_L TYPE D,
 FECHA_H TYPE D.
 read table l_t_range with key
 fieldname = 'CREATEDON'.
 l_idx = sy-tabix.
 FECHA_L = '20050101'.
 FECHA_H = '20051231'.
 l_t_range-SIGN = 'I'.
 l_t_range-OPTION = 'BT'.
 l_t_range-LOW = FECHA_L.
 l_t_range-HIGH = FECHA_H.
 if l_idx <> 0.
 modify l_t_range index l_idx.
 else.
 append l_t_range.
 endif.
 p_subrc = 0.
I also tried with fieldname = '0CREATEDON' but I got the same error.
Thanks in advance 4 your help

Hi,
Try replacing
DATA: FECHA_L TYPE D,
FECHA_H TYPE D.
part of code with
DATA: FECHA_L (8) TYPE C,
FECHA_H(8) TYPE C.
Hope this helps.
Regards
Rahul Bindroo

BI 7.0 Routine URGENT

Similar Messages

Maybe you are looking for