BI Applications 7.9.6.1 - Few SIL and PLP Tasks stopped in Full data load

Hi All,
I have run full data load for Projects analytics. I have 23 tasks with status "stopped". These are SIL and PLP tasks for Project Facts load. It also contains tasks related to employee dimension and user dimension SCD update
I have checked the staging tables for many of the Facts/Dimensions corresponding to the stopped tasks and they have data.
All my other dimensions have loaded successfully and am able to query them from Answers using the BIA subject areas.
Could any one suggest possible reason for the tasks to be stopped.
Any pointers will be great at this point in time.
Many Thanks,
Kiran
Edited by: Kiran Kudumbur on Nov 30, 2009 4:25 PM

Thanks for that pointer!
Yes I had overlooked one failed task. It was a group task on employee dimension (Index creation on DS table had an error). Fixed that error and ran the failed and stopped tasks again. All working fine now.
Facts have been loaded and dashboards are working pretty fine.
Thanks,
Kiran
Edited by: Kiran Kudumbur on Dec 1, 2009 12:54 PM

Similar Messages

Satellite L350D Works for a few minutes and then completely stop

Hi all!
I am having a weird problem with my laptop Satellite L350D-216
I've used it for a long time in a row and starts to show some strange vertical lines at the screen and kind of loose focus and then it went completely black
Since then if I switch off and leave for a few hours it switches on normally and work for 5/10 minutes and goes black again.
It happens after I was working on it for about 20 hours straight or so (might be related)
What i did tried:
-Switch on only with the battery
-Switch on only with the AC
-Take all off and hold off key for 1 min and then try again both above
When it does switch on everything seems to be working 100% without problem but doesnt last more then 10 minutes as I said
Any ideas?
Thanks in advance

Hi Horwath and Pau Pau,
First of all thanks for trying to help.
This morning I've open the laptop and clean it the cooler completely (was full of dust) and it is now working full speed.
What I've noticed however is that the problem seems to be worsening. Today, even before the cleaning, when I switch on the computer after a whole night of i got the blank screen straight away. So I couldn't test it at BIOS as you guys ask me too, however yesterday, even before posting here, I've tried something similar and the black screen came after a few minutes as if i was using windows.
You think the GPU is faulty?
And, if the answer is yes, is it worthy/possible to replace? How much it would cost?
Any further test I could do to make sure the problem is at the GPU?
Thanks again
Amantino

After upgrade to 10.9.3,some of my applications would not respond.a few blinks and gone,as app stor-preview-dictionary.

since upgrading my Imac to version10.9.3 ,in a few days ago,I am unable to open any pictures by PREVIEW APP.also app store icone,only blinks and goes away.as soon as I touch my dictionay app,ibook app,it blinks a few , and goes away.
please tell me what to do?
I resently,used mac cleaner and cleaned what was chosen by it..I downloaded adobe photoshope master applications,and once i deleted all adobe applications and any names of adobe on my imac spotlight list shown .and reinstall all adobe photoshop master files again.
Now please help me ,to solve this problems beside, not be able to cync my Imac with my Iphone 5c.unknown error 1723 occurres,by itune 10 .2.2.
thank you very much

So the result form Apple authorized servis was that both motherboard and graphic card need to be replaced (cost aproximatelly 1100$) and in addition they said there will still remain some problem with display which would cost additional 500$ to fix. Taken in account that there would be only 90 days warranty on new parts I decided to give up with the iMac. Very disappointing after only 1,5 year on machine that costed more than 2000$.
Recommendation from me after this experience - buy 3 years warranty if possible. I am personally very much looking forward for Mac Pro refresh. I don't want to be again in situation that if something breaks in my working machine I have no chance to replace it myself and can only expect very high repair costs. Untill new Mac Pros are out I'll suffer working on Mac Book Pro.

Recently when I want to charge my Macbook Pro, ok Pro 13" with my Magsafe adapter, it charges for a few seconds and then it stops as soon as my MBP found the remaining charging time.. I haven't done anything to my adapter.

Hi all
The last couple of days when I wanted to charge my Macbook Pro 13", my magsafe adapter stopped working when my MBP found the remaining charging time.
When I charge my MBP with another adapter, it works fine.
What can I do? Do I have to go back to the store? It is only four months old.

sounds like a funky charger, go to the store and try anoher if it messes up have it replaced. They've been having issuses wuth the new charger

Applications randomly freeze for a few seconds?!

Hi guys,
I have had nothing but trouble with this most recent iMac I purchased 4 months ago. It's the 24" described in my profile. AppleCare came out and recently replaced my faulty HDD, and put a 500gb Hitachi in (replacing 500gb Seagate).
Anyway, for no reason, after a fresh install and all the updates, applications will freeze for a few seconds and show the spinning beach ball- doesn't matter what application (Wow, Safari, Quicktime, Skype, Adium, etc.)- anything! I can see in activity monitor that there is a spike in the disk activity at the time, but cannot explain why. It's a brand new hard-drive! Interestingly, there is no corresponding jump in CPU or RAM access, so it's obviously some kind of data-dump issue with the HDD....the new HDD...
Looking in Activity Monitor, it appears to be the data read/sec that is spiking.
This is extremely frustrating, and I thought the new HDD would solve this, but apparently not. I don't particularly wish to reinstall OSX, and AppleCare in Australia is shut at the moment (midnight)
Does anyone know of a solution, or why it's happening?
I never had ANY of these problems with my first 24" that I bought late last year, with stock everything (hdd, gfx, etc.)....I feel like this one is faulty by nature....
Thanks!
EDIT: http://forums.mactalk.com.au/showthread.php?t=36763 shows my original HDD issue with the previous HDD....you can see this *****

Charles Minow wrote:
kendals wrote:
Hmm, I actually think it might be this new HDD that has been installed. Whenever it wakes from sleep, it takes a MUCH longer time than my previous machine, and even my previous hdd which was faulty.
And I can hear it first start to spin the HDD up in a little whir, then the clicky sorta bits where it is reading it, and then finally after the spinning ball, it gives me the PWD screen.
It has to be the HDD. Calling Apple in the morning...
Sound like that could be a HDD problem. One way to confirm it is to look at the Console application from your Utilities folder. Look at the System Log and Console Log and see if you see any lines with text like "disk0s2: I/O error." at the times when you see the freezes and hear the clicks. Note that the numbers in the disk0s2 part can change, depending on how your drives are set up.
charlie
Charles Minow wrote:
kendals wrote:
Hmm, I actually think it might be this new HDD that has been installed. Whenever it wakes from sleep, it takes a MUCH longer time than my previous machine, and even my previous hdd which was faulty.
And I can hear it first start to spin the HDD up in a little whir, then the clicky sorta bits where it is reading it, and then finally after the spinning ball, it gives me the PWD screen.
It has to be the HDD. Calling Apple in the morning...
Sound like that could be a HDD problem. One way to confirm it is to look at the Console application from your Utilities folder. Look at the System Log and Console Log and see if you see any lines with text like "disk0s2: I/O error." at the times when you see the freezes and hear the clicks. Note that the numbers in the disk0s2 part can change, depending on how your drives are set up.
charlie
Thanks, Charles.
Looking at the Console log, it doesn't seem to have any i/o errors. Since both logs are quite lengthy, and the quoting system here is a bit akward, I've linked them:
Console.log: http://www.miraclesalad.com/webtools/clip.php?clip=e04
System.log: http://www.miraclesalad.com/webtools/clip.php?clip=e06
Couldn't really see anything there, but have a look if you'd like. Looking forward to calling Apple Support today and finding out what the deal is...only just got this new HDD put in!

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Our apologies but there was an unexpected error with the application. This problem has been noted, and an email has been sent to the administrators. Please check back in a few hours to try the download again. What is

What is going on here. I've waited 4 weeks for my ipad which will not do anything untill I've downloaded the latest version of itunes which I can't do because this message keeps appearing,
Our apologies but there was an unexpected error with the application.
This problem has been noted, and an email has been sent to the administrators.
Please check back in a few hours to try the download again.
Reading another post, someone is still trying after two days!
Anyone got a solution to this please, or, if not, does anyone know how to email itunes.
Thanks, Allan

Found this
http://www.v3.co.uk/v3-uk/download-review/1955243/apple-itunes-1011
Hope it helps

"Mail" application "closes unexpectedly" after a few seconds.

“Mail” application "closes unexpectedly" after a few seconds.
I use "Mail 1.3.11" to hnadle my e-mail. It works fine.
This weekend, due to a problem with an address, the server of my University has delivered more than 1000 messages to my account.
When I have opened "Mail 1.3.11" those messages have begun to enter into the "in" mail box. I have stoped it but anyway a good quantity of them have entered.
I have already solved the server issue but now that I want to empty those messages from "Mail 1.3.11" I cannot since the application "closes unexpectedly" a few seconds after opening it without letting me do anything.
How could I open and kept open my "Mail 1.3.11" until I am able to clean it?
Thank you,

[kmosx: Apps unexpectedly quit|http://discussions.apple.com/thread.jspa?messageID=607542&#607542]

I updated itunes for my 64 bit system to 11.1.4. I was not able to detect my cd drive. I removed itunes, apple software update, apple mobile device support, bonjour and apple applications support. After a few attempts it now recognizes my cd drive but no

I updated itunes for my 64 bit system to 11.1.4. I was not able to detect my cd drive. I removed itunes, apple software update, apple mobile device support, bonjour and apple applications support. After a few attempts it now recognizes my cd drive but not by ipod. Any suggestions? Thanks.

I updated itunes for my 64 bit system to 11.1.4. I was not able to detect my cd drive. I removed itunes, apple software update, apple mobile device support, bonjour and apple applications support. After a few attempts it now recognizes my cd drive but not by ipod. Any suggestions? Thanks.

Since upgrading to iOS6 I can't browsing all application at app store only few I can browse which made me upset it narrow down my choices how can I over come this problem plz

Since upgrading to iOS6 I can't browsing all application at app store only few I can browse which made me upset it narrow down my choices how can I over come this problem plz

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen. How do I fix this??

Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
Elaine

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Dock disappears for a few seconds and minimized apps open up

Hello
My dock at the bottom of the display will disappear for a few seconds and at the same time, my minimized open applications will open up. This usually happens when I'm running a few light applications at once. It almost seems to "gulp" or catch it's breath.
I'm not sure if this is related but for the second time since purchasing the machine the dock is showing a sort of double reflection at the very bottom. An open application has what looks like two lit triangles underneath the icon instead of the usual one triangle. The same area at the bottom of the dock shows a very tiny "bottom" of the page I have open, in this case Safari. It also moves left and right as I move the open page left and right. If I move the page down, the sliver at the bottom of the dock moves up.
This is only the second time this has happened. The first time it went away on it's own and today it's back. It's not troublesome at all but I'm just wondering what may be causing these symptoms.
Thanks!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

IPhoto won't start... Icon bounces a few times and stops

Hey Guys,
I'm using iPhoto now for a long time, but a few weeks ago it simply stopped working... My iPhoto Version: 9.5.1 on Mavericks 10.9.1
When I double-click the icon it bounces a few times and then disappears again. I tried already many different solutions like repairing disk permissions or deleting the plist-files, rebuilding the iPhoto library doesn't work because the app won't start...
Can anybody help me?
Thank you already now for helping me
Macbook Pro Late 2011
Mac OS X 10.9.1 Mavericks

I found the solution by myself after long time using google...
Mac Console said the following:
"Dyld Error Message:
Library not loaded: /Library/Frameworks/NyxAudioAnalysis.framework/Versions/A/NyxAudioAnalysis
Referenced from: /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/iLifeSlideshow
Reason: image not found"
Here I found the solution for all who need it:
http://www.sanebutdifferent.com/iphoto-11-nyxaudioanalysis-crash-error
Simply downloading a new NyxAudioAnalysis.framework and replacing/copying it to the location shown by Console solved everything!
Good Luck!

How can I change the insert SWF File, I need to add a few things and make it better?

How can I change the insert SWF File, I need to add a few things and make it better? Is there an option inside of the dreamweaver menu that I am not looking at. It would make it easier on me if I changed some things around and didn't have to do it all myself each time I used it. Just incase you was needing to remember what swf flash was, It is not a swf video either.
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="640" height="480">
    <param name="movie" value="Sonic Kaboom.swf">
    <param name="quality" value="high">
    <param name="wmode" value="opaque">
    <param name="swfversion" value="9.0.115.0">
    
    <param name="expressinstall" value="../Scripts/expressInstall.swf">
    
    
    <object type="application/x-shockwave-flash" data="Sonic Kaboom.swf" width="640" height="480">
      
      <param name="quality" value="high">
      <param name="wmode" value="opaque">
      <param name="swfversion" value="9.0.115.0">
      <param name="expressinstall" value="../Scripts/expressInstall.swf">
      
      <div>
        <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
        <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
      </div>
      
    </object>
    
</object>
</div>

If I understand correctly, Sonic Kaboom.swf needs to be edited in a separate Flash authoring program and then reinserted into your HTML document.
As Murray said, Flash is dead. Nobody uses it anymore.   We use HTML5, CSS3 and JavaScript animations which have universal support from Smartphones, Tablets and other web devices that can't support Flash.   Look at Edge Animate.
HTML animation | Download free Adobe Edge Animate CC trial
Nancy O.

I have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any sugg?

i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?

This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.

BI Applications 7.9.6.1 - Few SIL and PLP Tasks stopped in Full data load

Similar Messages

Maybe you are looking for