Return Infopackage Load Status
Hi ,
Requirement is to trigger an info package load through an ABAP program. I have located a function module
'RSSM_SDL_START_INFOPACKAGE' which does the same and used it in my program.
However I also need to track the final status of the load (i.e red / green) in my program and acoordingly make other decisions. But the FM mentioned above is not able to do so.
Please suggest any other FM / any other way out.
Thanks Bhanu,
The FM you suggested triggers an Info Package and also returns the Request Id.
Can you please suggest any FM / any way to track the status of this Request Id.
That will solve it.
Thanks once again...
Similar Messages
-
Infopackage - load to ODS - status yellow !
Hi everybody,
I am on BI 7.0 and i use Architecture 3.5.
When i transfer data (36000 records about) from a data table to ODS, i obtain for the 2 last days
a problem of loading -
> Status is always yellow.
As concerns TRFC, In transaction sm58, i obtain the following error:
RFC: RSAR_TRFC_DATA_RECEIVED
Status: Conversion Error
I have different behaviours following configuration of my InfoPackage when Incorrect Data Records Occur:
- Valid Records update, reporting possible -
> Status Yellow
- Valid records update, no reporting -
> Status Red (few records are wrong)
Have you any ideas ?
Thanks a lot,
Rodolphe.Hi,
If your data packets are getting into BW, then check your transfer and update rules, for any routines where the data is getting stuck.
If there are warnings, in the infopackage there is an option for treatment of warnings. Select the radio button as green and then reload the data.
Also suggest you keep an eye on SM50/51/66 to check what's happening with the data load.
Check the size of the data packets. If possible reduce the data size of the packets and see if that helps.
Cheers,
Kedar -
Error While Monitoring the Infopackage Load(URGENT)
Hi All,
I am monitoring one Process Chain in that one Infopackage load is going on since 1h 45m , i have checked for the short dumps but there is no time out issue and i am checking the job status R/3 side in SM37 but it saying no job matches with this selection criteria.
Can anyone please help me out in this isuue.
Thanks
karunaHello,
Check the background job (SM37) by giving one day before in the BW Side. Also goto RSMO -> Detailed tab and check still IDoc is being received and in the Status tab check the waiting time of the job for cancellation.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/] -
How to automatically modify the Infopackage QM status in a process chain?
We have a process chain that automatically load data to Infocube 0IMFA_1 (The Business Content IM Cube). In this chain we have Infopackage 0CO_OM_OPA_1; this Infopackage has a particularity that remains in a yellow status because it looks for CO orders assigned to IM; if there are orders that aren't assigned to IM, wich is our case, yellow status appears. SAP note 172471 explains the situation and for us the condition that arises the yellow status is not a problem. So we need to turn the status to green in the process chain, but automatically, not manually as suggests the mentioned note. How can I do it? Please help!
I don't know the specific extractor.
With the function and the table you can develop a program that will "modify QM the Infopackage QM status".
Check the status in table and use the function to modify -
How to get rid of the loading status at the bottom
The loading status is like how it is in chrome now. I absolutely hate that. I use the addon bar, so why can't i put it back into the addon bar. Its just additional stuff i dont need. I would also like it to be where if you hover over a link you can see it before you open it in the addon bar instead of the address bar. Problem with it being in the address bar is i can't see the whole link address.
See also http://forums.mozillazine.org/viewtopic.php?f=23&t=2087945
-
Hello, thanks for any help.
Is it possible to predict how long an applet will take to load and with this
info devise a status bar to inform the user of the load status?
JacoA search with Google provided
http://www.javaworld.com/javaworld/jw-12-1996/jw-12-progressbar.html
and
http://www.google.com/search?q=java+applet+progress+bar -
How do I get the page loading status indicator back?
After updating to Firefox 29.0.1, the little page loading status spinner has disappeared.
It is no longer on the View/Toolbar/Customize screen, so I can't put it in the menu bar
as I used to.
Is there an add-on for this?I use
'''''[https://addons.mozilla.org/en-US/firefox/addon/progressmeter/?src=collection&collection_id=33bf10fa-666d-45a2-9bc9-491ce21671c6 ProgressMeter]''''',
A progress bar for Firefox. Now I can watch as the data is coming in from the web.
I can even see if the data seems to stop before the page is done. -
Any BADI returning the 'IDOC Status' during IDOC generation.
Hello All,
I need a BADI which is being called during any IDOC generation and which returns the 'IDOC Status' i.e. Pass/Fail etc.
So far I am able to find BADIs like 'IDOC_DATA_MAPPER' or ''IDOC_DATA_INSERT'' but such BADIs only return the IDOC document number.. they do not return any information on IDOC Status (the field Status field remains blank).
Can any one suggest some solution on this please.
Regards
Vikas GuptaHi Erik,
Thanks for your reply, though i was able to get the status from BADI IDOC_DATA_MAPPER itself (earlier there were some config issues...which were creating some problems) but thanks for letting me know about table EDIDS, it helped at places.
Regards
Vikas Gupta -
QM-SD: Sales Return Inspection lot status Error
Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status ErrorDear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh -
SD-QM: Sales Return Inspection lot status Error
Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status ErrorDear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh -
Populating a load-status table from SQL*Loader
Hello,
I am using SQL*LDR to load a table and once I'm done with this load I am supposed to populate a status table which will capture the 'SYSDATE', and the total number of rows I loaded in the other table.
Can anybody help me?
ThanksBTW, the load-status table would take the error-record-count as well as the load-count?
Sorry missed that earlier! -
ABAP Program Name CHanging the PSA Load status
Hi,
Our Scenario is Non-SAP -> PI -> BI.
Every Day PI reads the file from source and it will directly upload to PSA in BI.But in PSA the status will show as yellow only it is not turning to green.But I am able to see the data in PSA but status is yellow.
When we activate the Data source manually the load status is turning to green.
I heared there is an ABAP Program to change the status.If anybody knows pl provide me the details.
Regards
Ram.Hi Ramakanth,
Yes, that right. I have mistaken here because our pos dispatcher pumps data source every 15 mins thats why its in yellow status. I am sorry about that.
Usually there are some reasons why the PSA in yellow.
1. If the data is being loaded from PSA to data target, it will be in yellow
2. If the data is loaded into PSA then it will be in yellow
3. If we make any changes in the PSA for example deleting few records in psa and then added and transferred records doenst match then it will be yellow. In this case we have to manually change the status.
In your case I am not sure y its not getting into green once is done. We never had any issue. Pos dispatcher runs and uploads the data into PSA and then we upload into targets.
Thanks
Srikanth -
Revision: 10570
Author: [email protected]
Date: 2009-09-24 07:53:33 -0700 (Thu, 24 Sep 2009)
Log Message:
Bug: BLZ-428 - pinging endpoint Returns a HTTP: Status 200 in ie8
QA: Yes - please make sure IE8 works with AMF.
Doc: No
Details: AMF does not work all the time in IE8 due to some IE8 and/or Flash Player bug. Setting the Content-Type in HTTP responses to text seem to resolve the issue. We're adding a temporary solution to change the Content-Type when IE8 is being used. This is not on by default though, user has to opt-in with this configuration option in channel definiton:
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-428
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java -
hai all,
I am trying to access the following url....
http://FQDN:8004/sap/bc/bsp/sap/crm_ic/default.htm?sap-client=370&sap-
sessioncmd=open
Its showing the "Loading" status.....in the internet browser,,,,,,,,,,,,,,,,,
I activated all the services in sicf.Please let me know,if i need to do anything.....
Thanks and Regards,
Venkat.Hi Venkat,
All i can think of .
1. ENDLESS LOOP.
2. BREAKP_POINTS may be set somewhere.
3. If buffered Frames are used, browser might not be supporting frames. (which might not be the case as you said you are using IE).
Checl st22 if there is shortdump ((which might not be the case as well).
Cheers
Amandeep -
I updated to firefox 4 and it's not as good as the former version. There is no refresh button, and I use that a lot. There is no loading status bar at the bottom of the page and I liked the tabs BELOW the page address.
Why do you keep changing things, just for the H**L of it...In Firefox 4 by default the Stop, Go and Reload (Refresh) buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar
For details about what happened to the status bar see https://support.mozilla.com/kb/what-happened-status-bar
Maybe you are looking for
-
Document no.1400865219 is blocked in G/L Account 1000 by 252830
Dear Gurus, we had gl account 252830 is for excise duty refund receivable. we are generating provision while posting invoice and we k/off that provision when we received duty refund from Government. Many times it happen that Factory people are stuck
-
HT1296 How do I sync (again) Outlook to my old IPhone? not working anymore
Having trouble syncing my Outlook calendar to my old IPhone.....has worked in the past in both directions, but no anymore
-
Hi, I'm having trouble figuring out why when I go full screen I see white and black bars at the bottom of my computer screen. Please see the attached files. I believe this happeneing becasue my controls are part of my swf. I hope someone can help out
-
Hi, I have copied the standard program behind FB60 and created a new transaction named ZFB60. There is no change in the code except that I have added a field on the main screen. Now the problem is when I run my transaction, it pops a dialog box and a
-
8100 Pearl - Does not initialize
My device 8100 pearl is having problems starting up. For as long as the battery stays, the phone automatically starts trying to boot, fails doing so and shuts down with the red LED blinking at the right corner. This process keeps cycling without ev