BI authentication popup when running report in CRM

When I run a report in CRM from the webUI I get a popup asking me to provide my user/pass to the BI system. Is there a way I can run a report in CRM without having to deal with this popup?
Thanks,
Nick

Hi Nick,
Assuming you're running CRM2007 outside an Enterprise Portal you need to make your "BI system trust the CRM system".
In this case I see that you might have to do the following things:
- Make sure that each CRM user has a corresponding user with the same userid in BI
- Configure a trusted system connection between CRM and BI instance (trx. STRUST) so that CRM can talk RFC with BI without additional authentication.
- Configure BI to accept SSO2 cookies issued by the CRM system (trx. SSO2).
Please refer to the respective Netweaver AppServer ABAP documention to make sure you fully understand the concepts and how to configure.
Side remark: As this is security sensitive topic make sure you have an alignment with the respective IT admin people of your company/ your project's company.
Best regards
Peter

Similar Messages

Smart forms print control pop box (no required) when run report

Dear All Expert Guru,
         how to control printing pop box when execute transaction code ,Report are make in smart form format
         because while run our report then come printing pop box select out put device the will come report
                                         . but our user required no should be come printing pop box they are required when run report direct come report
   Pls help me any one.
Thanks & Regars.
Sudhir Srivsatava

Hi,
   Pass the parameter no_dialog = 'X' while calling the smartform.
data: wa_ctrlop type ssfctrlop.
   wa_ctrlop-no_dialog = 'X'.
CALL FUNCTION fm_name
EXPORTING
*   ARCHIVE_INDEX              = ARCHIVE_INDEX
*   ARCHIVE_INDEX_TAB          = ARCHIVE_INDEX_TAB
*   ARCHIVE_PARAMETERS         = ARCHIVE_PARAMETERS
    CONTROL_PARAMETERS         = wa_ctrlop
*   MAIL_APPL_OBJ              = MAIL_APPL_OBJ
*   MAIL_RECIPIENT             = MAIL_RECIPIENT
*   MAIL_SENDER                = MAIL_SENDER
*    OUTPUT_OPTIONS             = OUTPUT_OPTIONS
*    USER_SETTINGS              = 'X'
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
*   JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
*   JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
Regards,
Srini.

Maxmize window when run Report builder 10gR2

Thanks in advance to all,
I have read of a post in which he treated maxmize window when run Report builder 10gR2, but I don't succeed in finding it. Can someone point out me the link?
PS. I have already post on Form Forum

Thanks for your reply.
But i was speaking maxmize window of report builder application on WIN xp, because when i
exe rwbuilder i always,have to maxmize window.
I know that it is a fool problem, but if to someone it happens and he had resolved...
Howevar thanks for your time

Error when running reports: "File Server needs to be re-initialized"

Hi.
This error "File Server needs to be re-initialized" appears when our users try to run reports on 11.5.10. EBS.
There is also a message box that appears and reads:
"A error occurred while attempting to establish a conection to Application File Server. There may be a network configuration problem, or the TNS listener may not be running."
This is a problem in our test environment. We recently ran autoconfig on the test side.
I have checked Metalink and also wider google search.
Perhaps we have an issue with the tnsnames files? Well, I verified this and the tnsnames in production and test, and they are the same.
Perhaps a listener.ora file issue?
"The issue is caused by the variables APPLFSTT and APPLFSWD is not being set properly in the <8.0.6_ORACLE_HOME> listener.ora file. " (Note 263654.1)
I am trying to verify the meaning of the following (in listener):
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /oracli2/oracle/testora/8.0.6 )
,APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE;PROD_FO,APPLFSWD=/or
acli2/oracle/testappl/admin;/oracli2/oracle/testcomn/temp;/oracli2/oracle/testco
mn/html/oam/nonUix/launchMode/restricted' )
In the APPLFSTT entry, should there be any mention of "PROD" ? Shouldnt this all be changed to TEST?
Also, comparing this to the PROD listener, the order of APPLFSTT is different:
TEST: APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE
PROD:APPLFSTT=
PROD_806_BALANCE;PROD;PROD_BALANCE;PROD_FO,
I have made a copy of our listener in TEst, so I can edit the existing one. Trouble is, not sure if I even should try to edit it!
Any suggestions, much appreciated.
Oracle 9.2.0. AIX 5.2.
Notes covered in Metalink:
274177.1
303971.1
304568.1
263654.1

Yes thanks for that. Metalink has informed me to do the same, basically.
But I am in the middle of a cloning, so I will finish that then run autoconfig once again.
I already ran Autoconfig on both source and target, so will do again once this process is over.
Cheers.
DA

Error when running reports on the WEB

Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
Thanks

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Error when running Report

I've a problem when run the report.
I get the error like below:
Rep-0108:File 'C:\orawin95\report60\rwbdexpq.res' not found.
Are you solve this error before? I already check the file and I found that is missing for the first time then I copy the file from the other machine.but same message still apear.
This only hanppend when the PC is newly install of my application from my installation disk.
Thanks in advance
Eric
null

I had an similar error, because I developed the form/report.. with an updated version of developer but forgot to update the users runtime module; when I installed the patch on the users pc everything went fine;
I tried at first also to copy the missing file, which didn't help at all;
null

Backend BW roles for users needed when running reports in infoview?

Hello all,
We are using SAP BI Queries as the sources of our universes, the user is going to logon to infoview to run report in webi. We have created some access levels in CMC to restrict users, the question is - the user will still need some kind of backend BW roles to have access to the BI query that is developed in BW system right? That way the user can fetch data?
Let me know
Thanks in advance.

Hi,
If you are using SAP Authentication and Single sign on option in universe connection, the users must have sufficient roles to access SAP BW database.
if not, the only user login which you create during connection creation having roles to access to BW database is enough. In this case, the user can login to Infoview using any user and can access the report if he has priveleges to the report.
Hope this helps!

Proxy error when running reports in Infoview

We are running XI 3.1 sp4 and are getting a Proxy error on some reports when running in PDF mode. Any ideas?
Here's the error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /AnalyticalReporting/ViewAsPDF/Disposition Analysis Report.pdf.
Reason: Error reading from remote server
Apache Server at preprod.nalts.com Port 443

Hi Sylvia,
It seems that the reverse proxy you are using: Apache could have problems with the sessions of the users. I have seen the same behaviour with other Load Balancers. If you have different WAS in the backend, make sure they stay with the same WAS (session affinity).
Regards,
Julian

Error 401 when run report "RSCMST" to test my content server

when I run report "RSCMST" to test the my content server. I get the error:
header HTTP/1.1 401 Authorization Required
date: Fri, 05 Dec 2008 20:20:45 GMT
server: Apache/1.3.41 (Unix) SAPCS/640
x-servertime: 20:20:45
x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
x-serverdate: 2008-12-05
x-pversion: 0046
x-errordescription: URI signature has expired
x-serverid: server="content01.ivo.com.cn";serverPort="1090"
x-servertype: SAP HTTP Content Server
content-length: 752
connection: close
content-type: text/plain
~remote_addr:
~uri_scheme_expanded: NONE
want 201
bad 401
time 17.974
It seems that the "bad 401" means a http error. I do not know how to configure it ?
my content server uses the maxdb, and http is apache, they are all running on redhat linux ese 5
who can give me some advices? thanks

hello,
I am also getting same problem with newly installed content server.
I have defined connectivity through CSADMIN. but when I 'm running this report I 'm getting same
time (-93) problem.
Could you please tell me how you rectified time zone setting problem..
would be great help..
Regards
Anju

When run report from form(6i) on the web,error FRM-921000

While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
null

I am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null

REP-56092 WHEN RUN REPORT IN WEB LAYOUT

I have installed report 9iDS and can run report in paper layout without any problem.
However , when I press "Run Web Layout" button , I get message
rep-56092 NO CLASS DEFINED FOR DESTINATION TYPE SCREEN WHEN RUN WEBLAYOUT.
Do anybody has idea why this is happening??

Hi
If the ENVIRONMENT is Sun SPARC and
NLS_LANG: Traditional Chinese_Taiwan.ZHT16MSWIN950 , then it is a known problem. There is a bug 2332838 filed for this issue.
regards
~sudha

Error when run report 10g (10.1.2.0.2) with Paper parameter form

Dear Friends
I just installed Developer suite 10g and Database 10g on my pc (10.1.2.0.2) when I run report in Report builder with paper parameter form (I selected only one system parameter : Destination type) I got the message
Reports Error Page
Fri Apr 07 09:06:01 GMT+07:00 2006
javax.servlet.jsp.JspException: REP-56092: No class defined for destination type Screen
How to solve it? Please give me the instruction or Oracle link that I can get the documents. If someone has the white paper .pdf please give me.
Hope with help
Thanks & Best regards,
Bansak K.
[email protected]

Thanks for the tip.
Correct me if I am wrong but you have set up SLED SP1 connecting to an OS like (RHEL 4/OEL 4,SuSE 9) using VMWare Server. What OS is SLED?
I chose SUSE 10.3 as its free and I want to set up apps server for purely training purposes. Do you know of a free linux OS that is certified to run AS 10g 10.1.2.0.2?
Thanks
Jon

Issue when Run Report with Hier selection   in the Portal

Hi Portal BI Experts,
we are finding a strange issue when Running the Report.
the following Variables are in the Report Selection screen :
Company code [optiona]
Prod.Variance Type [ mandatory]
Hierarchy Node Variable [optional]
TheQuery which I am Running thro Bex Analyzer with the Hier selection as below , is working fine. But
When I run   thro portal with Hier selection value   with    00/50/G310/702258(0CUST_SALES
It automatically display as +00/50/G310/702258(0CUST_SALES    with + symbol. and thro the error:
Input "\+00/50/G310/702258(0CUST_SALES);\+00/51/G410/703096(0CUST_SALES)" for Ship-To Party (Sales has invalid format
If I remove the plus symbol report runnig fine.
Your immediate help highly appreciated.
Thanks
Hema
Edited by: hemav on Mar 21, 2011 2:29 PM

Hi Jaya,
This is the Error message I am facing when I Execute ithe query report n the Web[Portal]
Input "\+00/50/G310/702258(0CUST_SALES);\+00/51/G410/703096(0CUST_SALES)" for Ship-To Party (Sales has invalid format
ie. In the variable screen the selected hier value automaticvally display with plus symbol
Actual   Hier value :   00/50/G310/702258(0CUST_SALES)
Once close the Hier selection list window , the Hier value turned to +00/50/G310/702258(0CUST_SALES)
If I give ok with this Plus symbol it throwing the above error. By removing the Plus symbol manually it is working fine.
I unable locate the settings.
that too when I run the same report in Bex Analyzer woking fine , no issues in the Hier value.
Thanks ,
Hema

Error when running report in CMC and Infoview

Hi all,
i have this following problem:
- when i try to run report in cmc it fails and i get this error message: Error in File ~tmp1a745af945b59b0.rpt: Failed to load database information
- when i try to run the report in infoview the error message looks like this: Error in File test_4: Failed to load database information.
Where can be the possible problem ?
Thanks for any suggestions.

<b>i dont know if this could help you, but i found something when trying to refresh report in infoview - the full error log:</b>
2009-05-27 08:40:54
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File Vykaz_2:
Failed to load database information.---- Error code:-2147215357 Error code name:internal
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.findGroup(Unknown Source)
     at com.businessobjects.report.web.event.q.a(Unknown Source)
     at com.businessobjects.report.web.event.z.a(Unknown Source)
     at com.businessobjects.report.web.event.bt.broadcast(Unknown Source)
     at com.businessobjects.report.web.event.ak.a(Unknown Source)
     at com.businessobjects.report.web.a.q.if(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.if(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.if(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595):
Edited by: Martin Zluky on Jul 27, 2009 9:35 AM

Error when running report in CMC and Infoview_2

I made this same thread in BOBJ Administration section but maybe it belongs here..........
Hi all,
i have this following problem:
- when i try to run report in cmc it fails and i get this error message: Error in File ~tmp1a745af945b59b0.rpt: Failed to load database information
- when i try to run the report in infoview the error message looks like this: Error in File test_4: Failed to load database information.
Where can be the possible problem ?
Thanks for any suggestions.

Hi,
this forum is about the Integration Kit with SAP. seems to belong to the BusinessObjects administration area
Ingo

BI authentication popup when running report in CRM

Similar Messages

Maybe you are looking for