BI content for E-sourcing in BI 7

Hi,
I have to activate e-sourcing standard reports in BI.
Any idea where shall I get BI content for e-sourcing (under which application componnent) ?

It means we dont have to extract e-sourcing data from SAP ECC. there are no standard datasources.
Also in BI 7 , are there standard BEx queries available?
Or it will be completely Z customized objects.

Similar Messages

Error while activationg BI content for BI admin cockoit for data sources

Hi all,
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I have applied the sap note 1110642 , 1110641 . also ran the program RSSM_SHIPDVERS_CLEANUP but did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
I also tried activating these data sources manually in BI content one by one , there alaso iam getting error :
Data source can not be actvatedm, troied in RSDS also by replicating but says there also that this data source does not exist in source system.
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
Akash

First of all Rather than using SPRO to install Admin Cockpit, its better to install it from Business Content, else many of your existing InfoObjects would get overwritten and you would require to revert them back.
2ndly, check if these DataSources are available in your source system. While installing from Business Content, the system prompts to log in to source system interactively and would install the DataSources in teh source system if they are not there already.
Also check what versions are your Source Systems on. Older versions may not have the DataSources while the new concept of Admin Cockpit is available in BI7.0 which goes well with ECC.
Regards
Anujit Ghosh

Error in Installing the Business Content for 2LIS_06_INV data source

Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha Jagannath

Hi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards.

"Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

Hi
We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
source site" but data gathering process is completing successfully.
Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
Thanks in Advance
srkr

Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
site" but data gathering process is completing successfully.
Earlier all the shared DPs are showing under Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

BI Content Activation going for wrong source system

Hi,
I am trying to activate business content for the Customer cube in BI 7. The problem is that although the source system selection shows client 200 selected, the content activation goes for client 500 (which is the BI client). That is, during the activation process the process diverts to client 200 for no apparent reason. I have tried selecting other source systems, but the system still goes for client 200. Any idea of what is going on?
Many thanks!
Regards,
Adeel Hashmi

Hi Reddy,
I checked it already and it shows the T90CLNT090 - IDES ALE Central system (client 800) which is shown as "Self-def'd" and not R/3, infact i dont have any source system specified under R/3 option. How do i fix this, as mentioned earlier we have both ECC and BI in the same box, will this affect???

Use of content rule vs source group for NATing

To NAT outgoing flows out of two servers, is it necessary to define a content rule and source group (or is just a source group sufficient?).
Having trouble with Option 2.
Option 1:
service svr1
ip address 192.168.10.1
no port
protocol tcp
active
Also does CSS do NAPT i.e. alter the source port number for outgoing packets from source groups?
service svr2
ip address 192.168.10.2
no port
protocol tcp
active
content outflows
protocol tcp
add service svr1
add service svr2
vip address <externalip>
active
group outgrp
vip address <external ip>
add service svr1
add service svr2
active
<add appropriate acl>
Option 2:
service svr1
ip address 192.168.10.1
no port
protocol tcp
active
service svr2
ip address 192.168.10.2
no port
protocol tcp
active
group outgrp
vip address <external ip>
add service svr1
add service svr2
active
<add appropriate acl>

to nat connections initiated by the server, you only need a source group.
No need for a content rule.
The CSS will port nat.
Gilles.

Insufficient content for edit, four point editing, ignore out point on source

Hello folks,
I'm a long time FCP 7 and Avid editor currently using 8.2 for two short form museum films and have been running into all sort of questions. This one comes up multiple times a day. I tried to search for this here but didn't find my exact issue or answers.
I am trying to do a four point edit and I keep getting the "Insufficient Content for Edit" error. My source is marked in and out for 5 sec and my timeline in and out is marked for 8 sec. Four points total. I have already checked the Ignore Source Out point in the Fit Clip window and have checked the "Remember" box as well. My source definitely have enough footage to fill the marked 8 sec in the timeline. So why isn't PP ignoring the source out point when I commit the edit? Of course, I works properly if I go to the Source window and remove the out point manually but that's a pain and shouldn't be the way. Is PP not capable of this? or Am I doing something wrong? What is the point of the "Ignore Source Out Point" if it doesn't apply to this very common situation?
Thanks for any help you folks can offer.
CHL

I think I know what the issue is.
When the Fit Clip dialog opens for me and the source is shorter than the destination, "Ignore Source In Point" and "Ignore Source Out Point" are grayed out. In other words, when the source is shorter than the destination, my only option is to ignore sequence in or out points.
If my source is longer than my destination then it allows me to check ignore source in or out. However, if I have Premiere remember this choice, when I try to insert a source clip that is shorter than the destination, I get the error that you get.
It's obviously a terrible setup and shouldn't be like this, but that's why it's happening.

Ensure field sequence is correct for data for mutiple source structure

Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
       HEADER_STRUCT            G/L Account Document Header
           LINE_STRUCT              G/L Account Document Line
Source Fields
       HEADER_STRUCT             G/L Account Document Header
           BKTXT                          C(025)    Document Header Text
           BLART                          C(002)    Document Type
           BLDAT                          DYMD(008) Document Date
           BUDAT                          DYMD(008) Posting Date
           KURSF                          C(009)    Exchange rate
           WAERS                          C(005)    Currency
           WWERT                          DYMD(008) Translation Date
           XBLNR                          C(016)    Reference
           LINE_STRUCT               G/L Account Document Line
               AUFNR                          C(012)    Order
               HKONT                          C(010)    G/L Account
               KOSTL                          C(010)    Cost Center
               MEINS                          C(003)    Base Unit of Measure
               MENGE                          C(013)    Quantity
               PRCTR                          C(010)    Profit Center
               SGTXT                          C(050)    Text
               SHKZG                          C(001)    Debit/Credit Ind.
               WRBTR                          AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
       E1FIKPF FI Document Header (BKPF)         <<<< HEADER_STRUCT G/L Account Document Header
               Select Target Structure E1FIKPF .
           E1FISEG FI Document Item (BSEG)          <<<< LINE_STRUCT   G/L Account Document Line
               E1FISE2 FI Document Item, Second Part of E1FISEG   (BSEG)
               E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
           E1FISEC CPD Customer/Vendor (BSEC)
           E1FISET FI Tax Data (BSET)
           E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
       Legacy Data          On the PC (Frontend)
           File to read GL Account info   c:\GL_Account.txt
                                          Data for Multiple Source Structures (Sequential Files)
                                          Separator Tabulator
                                          Field Names at Start of File
                                          Field Order Matches Source Structure Definition
                                          With Record End Indicator (Text File)
                                          Code Page ASCII
       Legacy Data          On the R/3 server (application server)
       Imported Data        File for Imported Data (Application Server)
           Imported Data                  c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
       Converted Data       File for Converted Data (Application Server)
           Converted Data                 c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
       Wildcard Value       Value for Wildcard '*' in File Name
Source Structures and Files
       HEADER_STRUCT G/L Account Document Header
                     File to read GL Account info c:\GL_Account.txt
           LINE_STRUCT G/L Account Document Line
                       File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text     Document Type     Document Date     Posting Date     Exchange rate     Currency     Translation Date     Reference
G/L Account document     SA     20080401     20080409     1.05     CAD     20080409     Reference
Order     G/L Account     Cost Center     Base Unit of Measure     Quantity     Profit Center     Text     Debit/Credit Ind.     Amount
     44000022                    1040     Line item text 1     H     250
     60105M01     13431     TO     10          Line item text 2     S     150
800000     60105M01                         Line item text 3     S     100
     60110P01     6617     H     40          Line item text 4     S     600
     44000022                    ACIBRAM     Line item text 5     H     600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
Curtis

Hi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
          VBAP( Item Structure)
My file should be like this i think
Identification content         Fieldnames
     H                               VBELN      ERDAT     ERNAM
                                      Fieldvalues for header
      H                              1000          20080703   swapna
Identification content         Fieldnames
    I                                   VBELP     AUART
                                      Fieldvalues for item
    I                                  001             OR
                                       002             OR
Is this format is correct.
Let me know whether i am correct or not

BI Content for Reserved Material

We have activated and loaded data using the BI Content for cube 0ic_c03 using datasources 2lis_03_bx, 2lis_03_bf and 2lis_03_um. This information is missing Reserved Material details.
What BI Content and Cubes are required to obtain Reserved Material information? The user currently can execute MC47 in ECC to find these values. We now would like to incorporate these values into our current BI reports and graphs.
Thanks for any information you may provide.

Hi Robin
You can create generic data source in RS02(R3 system)
Check the below article to create generic DS
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40394d9b-93b9-2d10-9f9a-f13118a4776d?QuickLink=index&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Regards,
Venkatesh

Missing content for inventory management (cube 0IC_C03)

Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
Thomas

Hi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas

Need info on BI content for "Hedge Management"

Hii Guys,
Can anybody help me in finding right BI contents for Hedge Management (Transaction banking)?
I can see some hedge related chars and key figures in 0CFM_DELTA_POSITIONS but no records are coming for those fields.
Am i looking at the right data source ?
Regards,
Ashu.
Edited by: Ashu Gupta on Mar 9, 2010 11:27 AM

Hi Martin,
I have already checked that but I am unable to get the desired information.
Thanks for your help.
Regards,
Ashu.

Prompt for user id and password during transfer of BI content for install

Hi! I am trying to install the BI content for SRM. When I select the appropriate data source and transfer, the system will start the transfer and half way through will prompt me to enter the user id and password to the ECC backend system. It will continue the process once I keyed in the id and password. I also get a prompt to logon with user so that the system can check whether I am authorized in BW to transfer datasources into the source system from from the content. I usually reply OK and will have to key in the user id and password again. This time, it will be to the SRM system.
Any idea whether this is normal or is there something missing in the set up? I have checked the RFC connection and it can connect when I tested the connection via SM59. The ports are also working.
Appreciate any help on the above.
Cheers!
SF

Hello,
It is normal only..whenever you try to install Business content which involves the Transfer rules or datasource replicata then it will go to the source system and checks whether active version of Datasource is available or not..
Fiirst activate the datasource in Source system and then install the flow in BI/BW.
Hope it helps you..
Regards,
Srikanth

Extractor for Purchasing Source List

Hi All,
Is there any business content extractor for Purchasing Source List in R3 basis component 620?
Thank you very much in advance.
RK.

Hi.......
Check this........
http://help.sap.com/saphelp_nw70/helpdata/EN/58/f6383fdb800804e10000000a114084/frameset.htm
Regards,
Debjani........

FI content for IS based ECC backend

Is the FI business content the same as the regular R/3 business content if the source system is a IS (Industry specific- for exampe-retail) ECC SAP system. The reason i ask is the BI business content contains specific IS related cubes, Data sourses etc for Sales, Inventory etc but i dont see any FI related content under that
Thanks

Hi,
Cross-Application Components -> Financial.
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/65/7beb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/FinancialAccounting.htm
http://www.sapgenie.com/sapfunc/fi.htm
http://www.sap-img.com/sap-download/sap-tables.zip
for tables check out link
http://www.sapgenie.com/abap/tables_fi.htm
http://www.sap-img.com/sap-fi.htm
Data Extraction -Line Item Level- FI-CO
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
and bi best practice
http://help.sap.com/bp_biv335/BI_EN/html/BW/FinancialAccounting.htm
business content datasources, check respective datasources, delta is explained
GL
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/e0143c5bd7b600e10000000a114084/framset.htm
AR
http://help.sap.com/saphelp_nw04s/helpdata/en/79/0d163c240a9440e10000000a114084/framset.htm
AP
http://help.sap.com/saphelp_nw04s/helpdata/en/79/0d163c240a9440e10000000a114084/frameset.htm
FICO
ttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
basic knowledge
http://help.sap.com/saphelp_47x200/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
FI
http://help.sap.com/saphelp_47x200/helpdata/en/56/df293581dc1f79e10000009b38f889/frameset.htm
CO
http://help.sap.com/saphelp_47x200/helpdata/en/1e/e9293504e1fd77e10000009b38f889/frameset.htm
Hope this helps,
Regards
CSM Reddy

BI content for E-sourcing in BI 7

Similar Messages

Maybe you are looking for