BI Content Activation going for wrong source system
Hi,
I am trying to activate business content for the Customer cube in BI 7. The problem is that although the source system selection shows client 200 selected, the content activation goes for client 500 (which is the BI client). That is, during the activation process the process diverts to client 200 for no apparent reason. I have tried selecting other source systems, but the system still goes for client 200. Any idea of what is going on?
Many thanks!
Regards,
Adeel Hashmi
Hi Reddy,
I checked it already and it shows the T90CLNT090 - IDES ALE Central system (client 800) which is shown as "Self-def'd" and not R/3, infact i dont have any source system specified under R/3 option. How do i fix this, as mentioned earlier we have both ECC and BI in the same box, will this affect???
Similar Messages
-
Transfer rules are missing for selected source system in BI content
Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna. -
G/L account picked for the "wrong" source system entry
Dear Experts,
in SRM 7.0, Classic Scenario, i am facing the following issue with respect to G/L account determination in the SC:
We have three R/3 systems connected to SRM. All these R/3 systems use the same Material Groups, but the G/L accounts are different in each R/3 system.
In the Table "Determination of G/L Account using product categories", i have maintained the repsective combinations. For each combination of product category and account assignment category, the respective G/L account is defaultet for the respective source system.
But in the shopping cart, the determination of the correct G/L does not always work. When a user enters the shopping cart initially with a line item that is accounted to his default account assignment category, than the correct G/L account for his source system is derived. But if he changes the account assignment category of the line item, than a G/L account from a "wrong" source system is getting picked up from the table.
I have checked the GUIDs of the product categories between "Comm_category" and "bbp_det_account" and they are correct.
What can be the reason for the picking of the G/L account from the wrong source system?
Can the note 1357871 bring the correction?
Thank you very much!Hello Dima,
I think your problem comes from your source system for product category management.
Could you clarify one point: if you change account assignment category, does new G/L account have to be determined for same backend system too or not ?
If yes, correct new G/L account will be determined using your customizing (IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Account Assignment > Define G/L Account for Product Category and Account Assignment Category ).
If it does not work, log an OSS message.
If no, you need to switch value for each SC item field BBP_PDIGP-LOGSYS_FI from old backend source system to the new one. For this, use BBP_DOC_CHANGE_BADI.
Then, your customized G/L account definition for product category and account assignment category should be OK.
Regards.
Laurent. -
Hi, Experts:
We moved transports for a new application from development into 2 QA systems (QB1 and QB2) in BI. The migration went OK for one of the system QB1, but got 2 problems with wrong source system for QB2.
1. The ODS can't be acitivated with an error message: "Invalid source system PB1CLNT100 entered."
2. The datasource connected to the ODS has the wrong source system "PE1CLNT100". It should be "QE2CLNT100" instead. I could manually replicate the source system from QE2 in QB2. But I can't link the datasource from the correct source system to ODS. When I tried to create transformation, it gave error that "ODS is not active due to invalid source system".
How should I fix this please?
Thanks,
JennyAs praveen says you have to make your transporting scheme correct.
When transporting a datasource from dev to another stage you have you define how the names from your source system have to change.
In your case i expect the two QA system to be connected to different R3 source systems.
You have to change that in the way praveen says and then do some re-transports.
Success
Marco -
Transfer Rules for two Source System in Production
Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik ShahHi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks. -
Message "Creation of DataSources for SAP source system is not permitted"
Hi,
I am in DW Workbench: Modeling and I need to copy a DataSource.
It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
What can I do?
ThksHii.
You can not copy the standard datasource to any other source system it will not allow you to do that.
But if you want to copy you can copy it to PC FILE source system.
It will allow you to copy there.
Right click in Datasource->Copy-> Give Target datasource name -
> intarget Source system tab -
>Give Source system for File.
Thanks
Mayank
Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM -
Creating DataSources for File Source Systems in csv format in sap bw 7.0
Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AMStep 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM IO_MATNAME
MAT001 TEA
MAT002 COFFEE
MAT003 SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!! -
Tcode for deleting source systems
Dear all,
is there any tcode for deleting source systems in BI 7.0? I tried RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELETE, but these two didn't exist in BI 7.0. Please help. Thanks.
Jin Minghi,
chk the below link
How to delete source systems?
Ramesh -
Activating transfer rules for new source system
Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
SujaiHi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V -
Will an BI Content upgrade from affect the source systems?
Our current BW has BI Content 7.02 patch 003; we are planning an upgrade to 7.03 patch 012. Will we have any impact on the source systems (ECC and SRM)? We are trying to decide if we need to archive and backup the operational systems. Since it is a lot of extra work and increases the number of people affected, we prefer not to do it unless necessary.
What type of regression testing is most common after a BI Content upgrade?
thank you very much,
LLKHi
As a data fetching from Source system -- the BI Upgrade does nt have any impact on Source Systems normally -- But u need to prepare a check list with before and after upgrade with DS ( Some times DS get de activated while upgradation ) and the DS are source system dependent so you may have to re activate the same based on requirement/possibilites-- And also you may have to empty the Delta Queues on Source System side -- otherthan that no impact , as far I know.
Hope it helps and celar -
Datasource is not active in BI though source system has active DS
Hi,
I have three datasources which are active in source system.
i had replicated all these three datasources into BI system...
But even after replication for all the three datasources M version is different from A version..
I cannot activate manually all these datasource in production system as it is allowed only for display purposes..
how can i make these datasources active?Hi Srini,
The worrying point is i had never done that like before..
I always transport datasource in R/3 side first and then replicate to BI systems and using directly..
since the source systems assigned to it are different ( In BI Dev system R/3 source system and in BI production source system is ofcourse is R/3 production..)
Is it Ok even if the dataasources had different source systems? when transporting from dev to prodution? -
Prevent objects being transported for Sandpit source system
Hi there,
We have a 3-tier systems landscape for BI: DEV, QAS, PRD (we do not have a sandpit BI). In our R/3 development system we habe two clients which are both setup as source system for BI DEV. One of the clients in R/3 DEV serves as sandpit in that system and objects can't be transported from it. However, since this client is connected to BW, objects related to this source system can be transported from BI DEV. We want to prevent that, so only the objects in BW DEV for the real R/3 DEV development client are allowed.
Is there a way in BI to configure a source system in such a way (other than via security roles/profiles), that objects related to this source system can't be transported?
Cheers.Sander, you should post this in BASIS also. By posting in both the forums, you have a better chance.
In case BASIS folks say that they cannot stop this, try this work-around.
In BWQ, in RSA1, there is a Source System Mapping in one of the tools menu. There, your DEV is mapped to QAS, etc.
There, you may have your R/3 DEV mapped to R/3 QAS.
See if there is an entry for your R/3 Sandpit/Sandbox. If there is one, leave the mapping for it as Blank.
See, the only Objects that are related to Source System in BW are InfoSource-DataSources. If there is no mapping for SOurce System in BWQ, then the transport will fail.
This is just a thought.
Uday-Ram Chamarthy -
How to create DataSource for BI Source System in RSA1?
I have a BI Source System defined, however I can't figure out a way to create a new DataSource for it. I can create DataSource objects for all my other Source Systems, but I can't figure out how to do this for this BI system.
I select my BI Source System, right-click, choose "Display DataSource tree". When I right-click from the DataSource tree, I expect to get "Create Application Component" and "Create DataSource" options, but instead I only see "Replicate Tree Metadata" and "Replicate DataSources" options.
How can I create DataSource objects for my BI system?Hi,
I guess you want to create a custom developed source in BI itself. For that you need to create the data source in RSO2 and inside you need to give the specific aplication component under which you want this DS to be in. Generate a data souce and then go to BI My self Source system and then replicate that particular appl component o view your data source.
Hope this helps
Regards,
Srini -
BI Content Transformation Rule for Data Source 2LIS_03_BX
Hi All,
I am using BI content info cube 0RT_C54 for queries. I am uanble to find BI content transformation rules for the Data Source 2LIS_03_BX. In "Network Display of the data flow" I am able to see the transformation rules for this data source. How can I activate and use the same ?
Regards,
RohitHi ankit,
Have u done all the mandatory settings before running setup for stock init.
1. Determine industry sector.
2. Maintainng process keys,
3. Maintining Application Indicatore in BF11.
Also activate other two ds - 2lis_03_bf & UM.
Then try to fill again setup data.
Hope this helps to u.
Thanks
Dipika -
Datasource Creation for Informatica Source system in NW2004s
Hi,
We are upgrading BW 3.5 to SAP NW2004s. In NW2004s Create datasource
is new feature provided in BW 7.0.
I tried to create this datasource for Flat file and worked fine. We
are also using Informatica as source system (External System).
Whenever I tried to create datasource for External system such as
Informatica, it gives message
"Datasource ZTEST(INFPCPD):Object Type RSDS not supported in BAPI
Source System"
Is it a bug? or Creation of datasource is not supported incase of
Informatica or external system?
Thanks
RupeshHi Rupesh,
The latest BI release in SAP NetWeaver 7.0 (2004s) includes a new type of DataSource for which staging BAPI has not yet been aligned.
Third party ETL tool vendors can therefore only implement their load processes using the original type of DataSource from BW 3.x. This DataSource is still provided in the new release without any changes. Upgrading to NetWeaver 7.0 (2004s) BI (BI 7.0) does not therefore endanger existing implementations based on BW 3.x and NetWeaver 2004 (BW 3.5).
It is also possible to migrate third party ETL implementations based on BW 3.x into the new data-flow concept of a NetWeaver 7.0 (2004s) BI environment using new DataSources, transformations (also new), and data transfer processes (DTP) (also new). This is possible because the system provides an emulated view for BW 3.x DataSources, which makes it possible to combine them with NetWeaver 7.0 (2004s) transformations and DTPs for regular batch load processing (this does not include direct access and real-time data acquisition (RDA)).
This allows the benefits of the new data loading concept to be made available in such third party ETL-based loading scenarios.
Regards,
Anil
Maybe you are looking for
-
Hullo folks... Basically: I purchased Lana Del Rey's Born To Die *and* the 'Paradise Edition' which has the original Born to Die tracks plus extra special edition tracks. However ITunes store won't let me download all of 'Paradise Edition' because i
-
hi all, the following code is for an alv grid. The program is working fine. But after execution when the report is displayed the code is going for a dump when the back button is clicked. Could anyone tell as to whats going wrong. And when the highlig
-
Abobe Bridge CC (64 bit) is trying to default to a deleted version of Photoshop (CS2) instead of the Photoshop CC 2014 version of suites How/where do I change the default for File>Open With>Photoshop? i haven't had Photoshop CS2 installed since the
-
How can I list the head texts or texts of position of the invoices created
hello experts I have a consultation. how can I list the head texts or texts of position of the invoices created in module sap SD? Up to now I can see them visualizing the document SD for transaction VF03, but I need to see a listing of invoices and d
-
Hi. I am currently developing an application which writes some data into a TDMS file. I have used the TDMS Set Properties VI to add some special properties as meta data. Basically it works, but only once. Now I would like to know why: The error messa