BI Publisher As a web service problem

Hello every body,
I work on University and we got an advice to use BI publisher as a report tool
we want to use Public Report Web Service which is coming with BI Publisher server
we need to create reports which contains a lot of parameters
and those parameters are optional
any note about how we can change the data source to work true with those optional parameters
BR,
Alaa

let me give you an example
I have information about students like its name,telephone,address and father status
we need to give 100 student scholarship if those students live in city A and his father status dead
and on the other side we need to give 50 student which is has a dead father
so as we see we have two reports one with city and other without
so city is optional parameter
any solution please?
BR,
Alaa

Similar Messages

  • PL/SQL Web Service problem in Oracle10g

    Hi everybody
    I try to publish PL/SQL Web Service using JDeveloper 9.0.4.0 and Oracle10g.
    But when I deploy the Web Service using 'http-web-site', error messages are:
    oracle.oc4j.admin.internal.DeployerException: Unknown site: http-web-site
    Active sites are:
    file:/D:/oracle/DS/j2ee/home/config/default-web-site.xml
         at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:131)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:364)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    Exit status of OC4J admin tool (-bindWebApp): 17
    Use the following context root(s) to test your web application(s):
    http://huan:????/CSE5200-PLSQLWS-context-root
    Note: JDeveloper was unable to determine the HTTP port number of the remote server for the above URL(s).
    Elapsed time for deployment: 2 minutes, 19 seconds
    When I change it to 'default-web-set', the following information is shown:
    ---- Deployment started. ---- 2004-8-31 8:50:08
    Target platform is Standalone OC4J (WSConnection).
    Wrote WAR file to D:\oracle\DS\jdev\mywork\CSE5200\PLSQLWS\WebServices.war
    Wrote EAR file to D:\oracle\DS\jdev\mywork\CSE5200\PLSQLWS\CSE5200-PLSQLWS-WS.ear
    Invoking OC4J admin tool...
    D:\oracle\DS\jdk\jre\bin\javaw.exe -jar D:\oracle\DS\j2ee\home\admin.jar ormi://huan/ admin **** -deploy -file D:\oracle\DS\jdev\mywork\CSE5200\PLSQLWS\CSE5200-PLSQLWS-WS.ear -deploymentName CSE5200-PLSQLWS-WS
    Notification ==> Application Deployer for CSE5200-PLSQLWS-WS STARTS [ 2004-08-31T08:50:32.487EST ]
    Notification ==> Undeploy previous deployment
    Notification ==> Copy the archive to D:\oracle\DS\j2ee\home\applications\CSE5200-PLSQLWS-WS.ear
    Notification ==> Unpack CSE5200-PLSQLWS-WS.ear begins...
    Notification ==> Unpack CSE5200-PLSQLWS-WS.ear ends...
    Notification ==> Initialize CSE5200-PLSQLWS-WS.ear begins...
    Notification ==> Initialize CSE5200-PLSQLWS-WS.ear ends...
    Notification ==> Initialize WebServices begins...
    Notification ==> Initialize WebServices ends...
    Notification ==> Application Deployer for CSE5200-PLSQLWS-WS COMPLETES [ 2004-08-31T08:50:45.766EST ]
    Exit status of OC4J admin tool (-deploy): 0
    D:\oracle\DS\jdk\jre\bin\javaw.exe -jar D:\oracle\DS\j2ee\home\admin.jar ormi://huan/ admin **** -bindWebApp CSE5200-PLSQLWS-WS WebServices default-web-site /CSE5200-PLSQLWS-context-root
    Exit status of OC4J admin tool (-bindWebApp): 0
    Use the following context root(s) to test your web application(s):
    http://huan:8890/CSE5200-PLSQLWS-context-root
    Elapsed time for deployment: 53 seconds
    ---- Deployment finished. ---- 2004-8-31 8:51:01
    And the Web Service still can not work. I did this before with JDeveloper 9.0.3 with Oracle9i and succeeded. Could anybody tell me how to resolve this problem. Thanks a lot.

    Thanks Frank.
    In my function package i create xml use dbms_xmldom. I save created xml into clob and return this clob in function.
    Now I want create web service that return my clob(xml).
    I try use JDevelper with PL/SQL Web Service Wizard.
    But I get wrong result (see in my first post).
    My Example xml in clob
    <test>"testvalue"</test>
    I want get responce
    HTTP/1.1 200 OK
    Content-Type: text/xml; charset=utf-8
    X-Powered-By: Servlet/2.5 JSP/2.1
    SOAPAction: "http://localhost/MyWebService1.wsdl/udoFDicnomnsXmlWs"
    Date: Thu, 28 Oct 2010 08:23:31 GMT
    X-ORACLE-DMS-ECID: 0000IjlvoFZB_6yb05nZ6F1CmJAZ000006
    Content-Length: 279812
    X-HTTPAnalyzer-RuleName: Pass through :
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    <env:Header/>
    <env:Body>
    <m:udoFDicnomnsXmlWsResponse xmlns:m="http://localhost/MyWebService1.wsdl">
    <result><test>"testvalue"</test>
    </result>
    </m:udoFDicnomnsXmlWsResponse>
    </env:Body>
    </env:Envelope>
    But I get
    HTTP/1.1 200 OK
    Content-Type: text/xml; charset=utf-8
    X-Powered-By: Servlet/2.5 JSP/2.1
    SOAPAction: "http://localhost/MyWebService1.wsdl/udoFDicnomnsXmlWs"
    Date: Thu, 28 Oct 2010 08:23:31 GMT
    X-ORACLE-DMS-ECID: 0000IjlvoFZB_6yb05nZ6F1CmJAZ000006
    Content-Length: 279812
    X-HTTPAnalyzer-RuleName: Pass through :
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    <env:Header/>
    <env:Body>
    <m:udoFDicnomnsXmlWsResponse xmlns:m="http://localhost/MyWebService1.wsdl">
    <result>& lt;test>&amp;quot;testvalue&amp;quot;& lt;/test>
    </result>
    </m:udoFDicnomnsXmlWsResponse>
    </env:Body>
    </env:Envelope>
    Can you advice something?
    Edited by: user10707438 on 28.10.2010 1:14
    Edited by: user10707438 on 28.10.2010 1:27

  • Can't re-add printer after removing from eprint center - 'Web Services Problem'

    I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
    Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
    STEPS TO REPRODUCE:
    1. Factory reset printer settings
    2. Factory reset network settings
    3. Restart printer and Reboot router
    3. Settings -> Network -> Wireless Setup Wizard
    4. Choose correct SSID, enter password for WPA
    5. ‘Connected to Network’
    6. Settings -> Web -> Enable Web Services
    7. ‘Accept terms’ screen -> Accept
    8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
    9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
    10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
    11. Repeat steps 6 and 7 - still same error message
    I consider myself technically savvy and have followed all advice I can find on this forum including the following:
    1. reverting to printer and network defaults
    2. rebooting router
    3. assigning static IP address to printer outside of DHCP range of router
    4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
    5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
    As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt  data on the server regarding my specific printer.
    I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
    Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
    Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
    Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
    Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
    Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
    Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
    Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
    I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
    One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
    Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
    Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
    So clearly the printer can communicate to those servers well enough to find it has the latest firmware. 
    I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
    Thank you in advance for any help!

    The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
    Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

  • Getting the Request Object in the EJB published as a Web Service

    Hi experts,
    I have a Portal Service that call a BAPI in a back-end system with the Connector Framework. I have a Portal Component that calls the Portal Service, passing the Locale (request.getLocale()) and the User (request.getUser()) object. It's work fine!
    I need to call the Portal Service by an EJB that is published as a Web Service. The connection between the EJB and Portal Service is ok, but I don't know how to get the Locale and the User object in the EJB to pass to the Portal Service.
    Is possible to get the request object from the HTTP SOAP Request?
    Thanks,
    Gustavo

    Hey Alice!
    The Feature Hashing module is actually a wrapper around
    Vowpal Wabbit's implementation of the murmurhash. Thus, it takes text in, and produces 2^N new features based on the text, where N is the bitsize specified in the module. These features (and not the original text!) should be used during model training.
    The Learner will then keep track of these features behind the scenes.
    When you publish your web service and these features are recomputed for new input text (same N), they are used as the features for scoring.
    Does that make sense?
    Regards,
    AK

  • [Integrated SOA Gateway] Publish Java based web service

    Welcome!
    Lately I have been trying to publish Java based web service through Integrated SOA Gateway. The documentation states that:
    +"Custom interface definitions can be created for various interface types including custom interface definitions for XML Gateway Map, Business Event, PL/SQL, Concurrent Program, Business Service Object, Java (except for Java APIs for Forms subtype) and Composite Service for BPEL type."+ (Integrated SOA Gateway Developer's Guide Release 12.1, "Creating and Using Custom Integration Interfaces")
    After familiarizing myself with $FND_TOP/bin/irep_parser.pl and $FND_TOP/bin/FNDLOAD tools, I have started coding my POJOs. Initially I have come up with three classes - request/response objects and service implementation. Service implementation has been annotated with "@rep:X" descriptors according to "Java Annotations" section of the documentation. While invoking $FND_TOP/bin/irep_parser.pl I have received errors about class resolution. My solution was to transform request and response types to static inner classes. This way I ended up with one *.java source file (see below).
    * Sample ISG Service.
    * @rep:scope public
    * @rep:product AP
    * @rep:displayname My Custom ISG Service.
    public class MyService {
    public static class Request {
    private String id;
    public void setId(String id) {
    this.id = id;
    public String getId() {
    return id;
    public static class Response {
    private String data;
    public void setData(String data) {
    this.data = data;
    public String getData() {
    return data;
    * Sample operation.
    * @param request Request Object.
    * @return Return Object.
    * @rep:displayname Test operation.
    * @rep:category BUSINESS_ENTITY SAMPLE_SERVICE
    public MyService.Response testOperation(MyService.Request request) {
    MyService.Response response = new MyService.Response();
    response.setData("Some Data");
    return response;
    ILDT file has been successfully created and uploaded. However, I could not see the "Generate WSDL" button on Integrated Repository website. Is there any particular interface or superclass that my service implementation should extend? I have reviewed "PurchaseOrderSDO" example posted in the developer's guide (page 407), but I couldn't come up with a working solution. Could you provide me with more detailed tutorial/example? Which documentation sections should I read again?
    After searching through forum, I have spotted $FND_TOP/bin/soagenerate.sh script, and thought that lack of "Generate WSDL" button was an EBS defect. After running the script, I have received an error:
    Error in Service Generation.
    ServiceGenerationError: Interface Type (JAVA) Interface SubType (null) is not supported.
    oracle.apps.fnd.soa.util.SOAException: ServiceGenerationError: Interface Type (JAVA) Interface SubType (null) is not supported.
         at oracle.apps.fnd.soa.provider.wsdl.ArtifactsFactory.getArtifactsGenerator(ArtifactsFactory.java:55)
         at oracle.apps.fnd.soa.provider.wsdl.WSDLGenerator.generateServiceWSDL(WSDLGenerator.java:128)
         at oracle.apps.fnd.soa.provider.wsdl.ServiceGenerator.generateSOAService(ServiceGenerator.java:75)
         at oracle.apps.fnd.soa.provider.wsdl.ServiceGenerator.generateSingleService(ServiceGenerator.java:88)
         at oracle.apps.fnd.soa.provider.wsdl.ServiceGenerator.main(ServiceGenerator.java:419)
    I would be grateful for any suggestions. Has anyone published Java based web service through ISG?
    Best regards,
    Lukasz

    I tried the following as per Oracle support and able to generate the wsdl though, but not invoke the webservices.
    1. Applied the patch 8607523
    2. Took the translator.jar file from the patch 8857799 and replaced the current translator.jar file
    3. Deploy the adapters.
    $FND_TOP/bin/txkrun.pl -script=CfgOC4JApp -applicationname=pcapps
    -oc4jpass=welcome -runautoconfig=No

  • Urgent web service problem. can not find url of WSDL

    Hi all,
    I met a web service problem recently.
    1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
    2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
    Anybody can give me some idea?
    Many thanks

    Nobody knows?
    Please help me

  • Can we publish Flows as Web Services in SAP BODS ? How ?

    Hello Friends,
    Can we publish Flows as Web Services in SAP BODS ? How ?
    Best Regards,
    Bheem.

    Hello
    Batch jobs and real-time services can be published via the Data Services web service.  See the Integrator Guide for full details - http://help.sap.com/businessobject/product_guides/sbods42/en/ds_42_integrate_en.pdf
    Michael

  • Publish PLSQL as web service wizard

    Is there a way to control naming of complex types in web services that are generated by “publish PLSQL as web service” wizard?
    I.E. for a type defined in the database called MY_TEST_TYPE the wizard generates something like MY_CONNECTION_MY_TEST_TYPEUser. I would like to see just MY_TEST_TYPE
    I know that this can be edited after the generation, but then benefits of managing 100% generated code would be lost.
    Thanks

    You may use properties file while generating Java classes via JPublisher wizard. You tell JPublisher wizard to omit schema (omit_schema_names parameter) names for your types, etc. You can read "About Properties Files" in JDeveloper help. Create a properties file and put all options in that file then use that file (somewhere in the wizard dialog - I do not remember) while generating Java classes via JPublisher wizard.
    The properties file example
    jpub.case=lower
    jpub.numbertypes=jdbc
    jpub.omit_schema_names
    jpub.methods=true
    Hope this helps.

  • Jdeveloper 11g R2 problem when publishing PL\SQL Web Service

    Hi Guys,
    I have been banging my head against the wall for the past few days trying to publish pl\sql package as a web service on a weblogic 10.3 but I keep running into the same problem.
    PL\SQL Package Source below
    create type dept_type as object
    (deptno NUMBER,
    dname VARCHAR2(50),
    loc varchar2(13),
    cr_date date)
    create type dept_list_table is table of dept_type
    purge recyclebin;
    create or replace package ws_package as
    procedure test_dept_table (pout out dept_list_table);
    end ws_package;
    show errors;
    create or replace package body ws_package as
    procedure test_dept_table (pout out dept_list_table) is
    all_depts dept_list_table := dept_list_table();
    dRecType dept_type;
    i number := 0;
    begin
    -- iterate through all depts
    for r_list in (select * from dept) loop
    i := i + 1;
    dRecType := dept_type(null, null, null, null);
    dRecType.deptno := r_list.deptno;
    dRecType.dname := r_list.dname;
    dRecType.loc := r_list.loc_id;
    dRecType.cr_date := sysdate;
    pout.extend;
    pout(i) := dRecType;
    end loop;
    end test_dept_table;
    end ws_package;
    show errors;
    I go and create PL\SQL Web Service using default settings in Jdeveloper 11g R2 but when I try and test this page I get the following response:
    Failed to invoke end component servqa.MyWebService1User (POJO), operation=testDeptTable -> Failed to invoke method -> java.sql.SQLException: ORA-06550: line 1, column 13: PLS-00306: wrong number or types of arguments in call to 'TEST_DEPT_TABLE' ORA-06550: line 1, column 7: PL/SQL: Statement ignored
    Anyone have any idea what the problem may be? Your help would be much appreceated!
    Bojan

    Hi Frank,
    I think the problem is in any procedure that has a COMPLEX TYPE as OUT parameter. So even if you strip down the procedure to just do nothing I still get the error as described in my top post. Passing complex parameters as IN parameter work fine its only when I have procedure with complex out when it errors. I also tried function that returns object parameter and that works fine too so not sure why this doesnt?
    create or replace package body ws_package as
    procedure test_dept_table (pout out dept_list_table) is
    begin
    -- iterate through all depts
    for r_list in (select * from dept) loop
    i := i + 1;
    end loop;
    end test_dept_table;
    end ws_package;
    Not sure if I am meant to do anything extra before I generate Web Service using JDeveloper if my procedure has got PL\SQL types as OUT parameters but as far as I know JDeveloper should do all the type conversions for you??
    Thanks
    Bojan

  • Generation Error - when trying to publish a Java web service

    Hi All,
    I keep getting the following Generation Error -- java.util.NoSuchElementException_ when I'm trying to create a Java Web Service using the jdeveloper wizard.
    I have 2 entities and 2 stateless session beans acting as their facades. One entity has a One-One(FK) relationship with the other entity. I test out the entities and session beans using the test client and the OC4J embedded container and everything seems to work. When I try to generate a Java WebService from one of the entities I keep getting the "Generation Error". Could someone please provide me with some insight into why I'm facing this problem, because it seemed fine when I published J2EE web services previously and now this happens and I cant seem to publish web services anymore. Everytime I keep getting the same GenerationError. Thanks in advance.

    Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

  • How to publish a SAP Web Service in SAP XI/PI 7.0

    Hi,
    First I've to say that I'n new in this deals with SAP Web Services and SAP XI/PI.
    I've created a Web Service with TX SE80 using a standard BAPI.
    I've created the Client Proxy with TX SE80.
    I've created a Logical Port wiht TX LPCONFIG.
    I've tried this is SOAMANAGER but I have this error...
    "SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
    I would like to publish this service in my SAP XI/PI 7.0
    How can I solve the error in SOAMANAGER?
    How can I publish de SAP WS that I've created in SAP XI/PI?
    Thanks a lot.
    Waiting for your news.
    Fernando.

    Hi Dimitri,
    I had the same problem:
    "SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
    And by following Nags hints I got solution:
    1, On the system where is your service provider, run transaction SICF
    2, Execute this transaction
    3, Go to node: default_host/sap/bc/srt/wsil
    4, Right click on "wsil" -> choose "Test service" - web browser should open with XML definition of service
    5, Find your service provider. In my case it looks like this:
    <service>
    <name>ZTEST_WS</name>
    u2212
    <wsdlNamespace>
    urn:sap-com:document:sap:soap:functions:mc-style/service
    </wsdlNamespace>
    <wsdlName>service</wsdlName>
    u2212
    <wsdl>
    http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
    </wsdl>
    </service>
    5, Look for WSDL link -> in my case:
    http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
    I dont know why, but this link is different like WSDL link in service definition which I can see in SE80:
    http://xxx.yyy.com:8000/sap/bc/srt/wsdl/sdef_ZTEST_WS/wsdl11/ws_policy/document?sap-client=800
    6, Use this link (from "wsil") instead of link from SE80 in SOAMANAGER to create logical port
    7, Yours logicall port should be created without errors.
    My question - have anybody idea, why this links are different and why only that second one works?
    Peter

  • JMS Proxy to Web Service Problem

    Hi All,
    I have a JMS proxy that routes messages to a web service. I have set the delivery failure parameters on the JMS queue. When a message is put onto the queue and there is a problem within the message flow proper, the message is retried the appropriate number of times and put onto the Error Destination queue as necessary. However, if there is a problem calling the web service, message delivery is NOT retried, the message is NOT put onto the Error Destination queue, and the message is lost. The web service itself isn't throwing a SOAP Fault, but the business service can't reach the web service (firewall issue). My Route Error Handler in the message flow is hit and it performs a Reply With Failure.
    Can anyone please explain to me if this is by design and, if so, why? Also, how does a person work around this? I need the message to be retried. I understand that a web service cannot participate in an XA transaction, but it seems to me any failure within the message flow should cause a retry on the JMS queue.
    Thanks.
    Edited by mvcg at 06/11/2008 1:57 PM

    You should remove the Route Node since it should only be used in HttpProxy.
    Instead use just the request pipeline for your routing.
    if (condition1)
    Service Callout (or publish) to Service1
    else if (condition2)
    Service Callout (or publish) to Service2
    else
    Rasie error?
    You shouldn't need to reply with failure. Any errors in the service callout or publish should go to exception handling if you use QoS exactly-once.

  • Call Webservice published by Biztalk web service wizard failed.

    Dears
    I have met an werid issue when call a webservice publish be biztalk.
    in fact I have publish three web services totally.  the problem is two of them are working, and third is not.
    this is the iis log captured. I found 500 error, has any one met this issue and know about the root cause?
    #Date: 2013-12-12 07:37:45
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
    2013-12-12 07:37:45 ::1 GET /EOrdering_Order_Proxy/ - 80 - ::1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+WOW64;+Trident/6.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C;+.NET4.0E)
    200 0 0 1885
    2013-12-12 07:37:53 ::1 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx - 80 - ::1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+WOW64;+Trident/6.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C;+.NET4.0E)
    200 0 0 1763
    2013-12-12 07:38:01 ::1 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx op=SubmitOrderOrConfirmation 80 - ::1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+WOW64;+Trident/6.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C;+.NET4.0E)
    200 0 64 5241
    2013-12-12 07:38:01 ::1 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx op=SubmitOrderOrConfirmation 80 - ::1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+WOW64;+Trident/6.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C;+.NET4.0E)
    200 0 0 680
    2013-12-12 07:38:03 ::1 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx op=SubmitOrderOrConfirmation 80 - ::1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+WOW64;+Trident/6.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C;+.NET4.0E)
    200 0 0 98
    2013-12-12 07:39:10 10.44.23.216 OPTIONS /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx - 80 - 10.44.23.216 - 200 0 0 0
    2013-12-12 07:39:10 10.44.23.216 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx/_vti_bin/ListData.svc/$metadata - 80 - 10.44.23.216 - 500 0 0 8
    2013-12-12 07:39:10 10.44.23.216 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx/$metadata - 80 - 10.44.23.216 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.18052) 500 0 0 6
    2013-12-12 07:39:10 10.44.23.216 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx - 80 - 10.44.23.216 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.18052) 200 0 0 5
    2013-12-12 07:39:10 10.44.23.216 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx disco 80 - 10.44.23.216 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.18052) 200 0 0 22
    2013-12-12 07:39:10 10.44.23.216 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx/_vti_bin/ListData.svc/$metadata - 80 - 10.44.23.216 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.18052)
    500 0 0 70
    2013-12-12 07:39:10 10.44.23.216 GET /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx wsdl 80 - 10.44.23.216 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.18052) 200 0 0 435
    2013-12-12 07:39:10 10.44.23.216 POST /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx - 80 - 10.44.23.216 - 500 0 0 338
    2013-12-12 07:39:11 10.44.23.216 POST /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx/mex - 80 - 10.44.23.216 - 500 0 0 679
    this issue is samiliar with
    http://social.msdn.microsoft.com/Forums/en-US/8984be48-3221-4ca7-9e60-00cc51e9d46a/request-format-is-unrecognized-for-url-unexpectedly-ending-in-metadata?forum=biztalkgeneral
    I also saw the event log metioned in that artilce. but I don't understand the root casue and solution. can anyone kindly help?

    This is the Event log detail, has any on met this issue before?
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 12/12/2013 4:21:56 PM
    Event time (UTC): 12/12/2013 8:21:56 AM
    Event ID: 7f0cb6e13bc8411e8f9ab5fa4d3c1a50
    Event sequence: 4
    Event occurrence: 1
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/1/ROOT/EOrdering_Order_Proxy-1-130313101166971105
        Trust level: Full
        Application Virtual Path: /EOrdering_Order_Proxy
        Application Path: C:\inetpub\wwwroot\EOrdering_Order_Proxy\
        Machine name: CNSHABPMQADB01
    Process information:
        Process ID: 3660
        Process name: w3wp.exe
        Account name: SNCORP\sgbpm01
    Exception information:
        Exception type: InvalidOperationException
        Exception message: Request format is unrecognized for URL unexpectedly ending in '/_vti_bin/ListData.svc/$metadata'.
       at System.Web.Services.Protocols.WebServiceHandlerFactory.CoreGetHandler(Type type, HttpContext context, HttpRequest request, HttpResponse response)
       at System.Web.Services.Protocols.WebServiceHandlerFactory.GetHandler(HttpContext context, String verb, String url, String filePath)
       at System.Web.Script.Services.ScriptHandlerFactory.GetHandler(HttpContext context, String requestType, String url, String pathTranslated)
       at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Request information:
        Request URL: .......................
        Request path: /EOrdering_Order_Proxy/WebService_EOrdering_Order.asmx/_vti_bin/ListData.svc/$metadata
        User host address: ::1
        User: 
        Is authenticated: False
        Authentication Type: 
        Thread account name: SNCORP\sgbpm01
    Thread information:
        Thread ID: 6
        Thread account name: SNCORP\sgbpm01
        Is impersonating: False
        Stack trace:    at System.Web.Services.Protocols.WebServiceHandlerFactory.CoreGetHandler(Type type, HttpContext context, HttpRequest request, HttpResponse response)
       at System.Web.Services.Protocols.WebServiceHandlerFactory.GetHandler(HttpContext context, String verb, String url, String filePath)
       at System.Web.Script.Services.ScriptHandlerFactory.GetHandler(HttpContext context, String requestType, String url, String pathTranslated)
       at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Custom event details:

  • Multiple List Builder and Query As A Web Service Problems

    Hi All,
    I quickly became aware that trying to pass multiple parameters to "Query As A Web Service" from a "List Builder" object in Xcelsius was not a simple task to acheive after reading this post here :-
    Query as a Web Service and In List
    I followed the advice that David Brunner suggested towards the end of the thread about creating a "BI Service" by publishing a block from a Webi Rich Client report.
    I then referenced the newly created "BI Service" by using it's WDSL URL through the Xcelsius Data Manager - Query As A Web Service connection.
    Everything appeared to work fine (e.g. Did my selections from the last builder and got refreshed/changed figures in my Spreadsheet Table object in the Dashboard) until I realised figures in my dashboard were not reconcilling and appeared much lower than expected.
    After monitoring what was happening traffic wise with "Fiddler 2" I discovered that Xcelsius was only passing the first entry in each of the selected values for the list builder even though a range of cells (e.g Month_Year!$a$2:$a$13) was specified to be passed as an input parameter to the BI Service (confirmed through viewing the Input/Output XML being sent).
    I even tried specifying the multiple values in the different suggested ways that David Brunner advised such as a semi colon delimited list (e.g. Miami;Boston;Chicago) but this didn't appear to be working either.
    Can anyone suggest what I may be doing wrong here? Why is only the first value being passed?
    I am using Xcelsius Enterprise 2008 SP3.
    Many Thanks,
    Gary
    Edited by: Gary Scott on Dec 1, 2010 3:49 PM

    Hi Gary,
    I have the same problem. Have you found any solution?
    Thanks.
    EZ

  • JDeveloper & web services problems

    I've recently installed jdeveloper onto winXP pro from the jdev9i_902.zip download and installed to D:\jdeveloper. Following the instructions I also installed JDK1.3 to D:\jdk1.3.1_04. I ran the setup for oc4j.
    The problem I have is that when I followed the "Publish a stateless Java class as a Web service" tutorial, everything goes well until I run it. The errors produces are (taken from the tcptunnel output):
    ===========
    HTTP/1.1 100 Continue
    Server: Oracle9iAS (9.0.2.0.0) Containers for J2EE
    Date: Sat, 20 Jul 2002 18:35:21 GMT
    HTTP/1.1 500 Internal Server Error
    Date: Sat, 20 Jul 2002 18:35:22 GMT
    Server: Oracle9iAS (9.0.2.0.0) Containers for J2EE
    Content-Length: 853
    Set-Cookie: JSESSIONID=72fa269c5c2f46889c1fe8e2b69b981d; Path=/
    Cache-Control: private
    Connection: Close
    Content-Type: text/html
    <HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1><PRE>Servlet error: Cannot generate Class: error: Invalid class file format in E:\Program Files\Java\j2re1.4.0\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
    D:\jdeveloper\j2ee\home\application-deployments\WorkspaceStatelessJava-ProjectStatelessJava-WS\WebServices\temp\__java_stateless_rpc\__HelloImplStatelessWrapper.java:0: Class java.lang.Object not found in class oracle.j2ee.ws.InvocationWrapper.
    ^
    D:\jdeveloper\j2ee\home\application-deployments\WorkspaceStatelessJava-ProjectStatelessJava-WS\WebServices\temp\__java_stateless_rpc\__HelloImplStatelessWrapper.java:8: Class java.lang.Object not found in import.
    import java.lang.Object;
    ^
    3 errors
    </PRE></BODY></HTML>
    =======
    The main section that concerns me is "Invalid class file format in E:\Program Files\Java\j2re1.4.0\lib\rt.jar(java/lang/Object.class). ", why is it using this?
    Any feedback on this is appreciated.
    Dave

    Hi Dave and Xuemei
    I'd like to try and help you on this question. Can you confirm the following for me:
    Did you download jdev9i_902.zip - the complete install or jdev9i_902_base.zip - the base install?
    Dave, in you mail you say you have downloaded the complete install. If this is the case, then you did not need to install JDK1.3 and change the SetJavaHome variable. If you now comment out that variable then JDeveloper should use its shipped JDK1.3
    The error message seems to indicate that a JDK1.4 version is being picked up by your system at runtime. Can you check if your classpath is set to this E:\ProgramFiles... directory. If so, can you try removing it (save it first!)
    JDeveloper is certified against JDK1.3.1_02
    Rgds
    Susan Duncan
    JDeveloper PM

Maybe you are looking for