BIAC in portal - only analysis pattern visible

Hi,
I'm running BI Administration Cockpit in Portal, implemented as described in SAP Note 934848 Collective note: (FAQ) BI Administration Cockpit.
However, although all implementation steps completed the monitoring queries cannot run in Portal. The system return only the analysis pattern with all the buttons, without the actual query.
The query can be run in preview mode directly from portal content, so connection should be ok. Also authorizations cross checked.
The analysis pattern is used as default for normal reporting so it cannot be inactivated.
Any idea where's the problem and how to solve/work around it?
Also, is there a possibility to migrate the SAP delivery 3.x web templates to 7.0 version? I'd rather keep 7.0 objects only active in the system.
Thanks!
Aki

Hi:
I had the same problem, I fixed it with the parameter ms/redirect_version = 1.
You can see the note 972514.
You must configure the message server of the ABAP Web Application Server in such a way that it uses HTTP return code 307 (temporary redirect - for HTTP 1.1) instead of HTTP return codes 301 (moved temporarily; use new URL) or 302 (moved temporarily; use same URL).
Most Web browsers (such as MS Internet Explorer and Mozilla Firefox) interpret this in such a way that they send the POST parameters to the server that is the target of the HTTP redirect. Note that the use of HTTP 1.1 for the Web browser is mandatory because return code 307 is available only as of version HTTP 1.1.
Set the ms/redirect_version parameter to value 1 and restart your ABAP Web Application Server.
I hope help you.

Similar Messages

  • Abap ProxiesNoconnection to Integration Builder(only generic data Visible)

    When we are executing SPROXY from R/3(ECC 6.0)
    Getting components ie connected to XI Integration Builder
    But when we are executing SPROXY from XI Server , we are not getting connection to Integration Builder, Getting error message like No connection to Integration Builder (only generic data Visible)

    Hi Satish,
    Make sure that you are having the following RFC's successful from your ECC/BW system towards your XI Integration Builder.
    1) LCRSAPRFC. - type T
    2) SAPSLDAPI  - type T
    3) PI_INTEGRATIONSERVER - type H
    Make sure that settings are done in SLDAPICUST tcode.
    Check whether the ICM is running & HTTP port is active in SMICM.
    please check the below link as well.. it will be more helpful.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?QuickLink=index&overridelayout=true
    Regards,
    Dino

  • No connection to Integration Builder (only generic data visible)

    hi,
    I am facing one problem in IDES system when connecting to proxy from my XI system.
    No connection to Integration Builder (only generic data visible)
    For this when I tried to create rfcu2019s type G and H in the IDES system, in that both rfcu2019s when testing it is giving the following msg.
    ICM_HTTP_CONNECTION_FAILED
    Is anything I need to do before connecting to RFCu2019s type G and H.
    thanks in advance.

    Hi,
    Check this URL:
    SAP NetWeaver Troubleshooting Guide:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
    Thanks,
    Boopathi

  • Portal Roles are not visible

    Hi,
    We have upgraged Portal (Nw 2004s) SP17 to SP18 ,But after upgradation portal roles are not visible for users and Portal adminstors (J2EE_ADMIN ) also.
    Standard roles like System ,user and Content Admin roles also not visible.It shows only blank screen after login to portal.
    It is critial issue .Please suggest how to solve this issue.
    Thanks
    Srikanth M

    Make sure there are no errors in the browser in the bottom left hand corner. Also, are you using a fully wualified name to access the portal? When you were on SP17 were you using standard roles or did you make your own copy of the roles and assign your users to the copied roles?
    If you navigate to the portal content studio directly, can you see the role contents?
    After launching /useradmin and authenticating, paste http://host:50000/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fadministrator!2fcontent_admin!2fcontent_admin_role!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content?sap-config-mode=true into your browser and you are in the content studio.

  • SPROXY: No connection to Integration Builder (only local data visible)

    ¡Hola!
    When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
    I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server.  I also checked that the parameters in the Exchange Profile were correct.
    Transaction SLDCHECK is working ok.  The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
    In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
    1.  The address of the Integration Builder must be stored in the R/3
         System
         =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
    Result: OK: Address maintained
    2. The HTTP connection of the R/3 application server must function
    correctly
    =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
    Result: HTTP communication functioning
    The following 2 steps return an error:
    3. The Integration Builder server must be running correctly
    =>Check with report SPROX_CHECK_IFR_RESPONSE
    Result: Integration Builder data not understood
    4. Proxy generation must correctly interpret the data of the
    Integration Builder
    ==>Check with report SPROX_CHECK_IFR_CONNECTION
    Result: Integration Builder data not understood
    I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system.   Can someone please help?
    Thanks and Regards,
    Carlos

    Carlos,
    Check Global Configuration data in R3  using TC : SXMB_ADM.
    You need to set values..Role of Business System : Application System and Corresponding Integration server details.
    Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
    Nilesh
    Message was edited by:
            Nilesh Kshirsagar

  • No connection to integration builder (Only local data visible)

    Hi,
    I am created Interface objects in IR but it is not reflected in SPROXY (ECC 5.0). It is showing like this no connection to integration builder (Only local data visible) please can you  help me necessary configuration.
    Regards,
    -Prabakar.A

    HI Prabakar,
    the Business System SM59 destinations LCRSAPRFC & SAPSLDAPI
      should have the Program IDs
    SAPSLDAPI _UNICODE.
    LCRSAPRFC_UNICODE
    See the online help for connecting Biusiness Systems
    [Connecting Unicode Business Systems|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
    see also
    [Connecting to the Integration Server|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
    Regards
    Kenny
    Edited by: Kenny Scott on Feb 25, 2010 5:02 PM

  • No connection to Integration Builder (only generic data visible)(SPROXY)

    Dear All,
    I am Establishing connection between BW and XI.
    I am getting "No connection to Integration Builder (only generic data visible)" error while opening SPROXY T-Code, also it shows user Menu Disable.
    Please suggest me to solve the error.
    thanks,
    RP

    hi RP,
    I too had same problem, below are the things taken care and finally fixed.
    1. SLDAPICUST settings pointing to SLD system & port
    2. Create SAPSLDAPI & LCRSAPRFC RFCs pointing to program ID created with SLD and XI system using VA (JCo RFC provider)
    3. Set the require settings with RZ70 pointing to XI system name & HTTP port
    4.Create ABAP based HTTP RFC pointing to Target system (XI system ) with HTTP port (smicm-goto-services) and path prefix with "/sap/xi/engine?type=entry" (without quotes). Ensure this RFC is existing at both the ends (source & target).
    5. If incase all ready the Technical System & Business existing at SLD for your business system, you may require to remove them and add them back/manually.
    Please let me know if any more info require.
    Thanks
    Chandra

  • No Connection to Integration Builder (only local data visible): from R/3

    Hi,
    I am also facing the same problem. I maintained the RFC destinations in R/3 properly. I did Test Connection and for RFC destination its working fine. I maintained proper values in SLDAPICUST. When I run SLDCHECK I got the following error.
    <b>Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code 4
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations</b>
    Otherwise access to XI Profile works fine. But then when I run SPROXY I am getting the same message <b>No Connection to Integration Builder (only local data visible)</b>
    I also checked the following report =>Check with report SPROX_CHECK_IFR_RESPONSE (3rd option) its giving informational message <b>Integration Builder data not understood</b>, for the 4th report  ==>Check with report SPROX_CHECK_IFR_CONNECTION, it is also showing the same above information message.
    Looking forward for the response,
    Appreciate your help,
    Thanks and Regards,
    Jagadish

    Hi,
    I had the same problem and I have already solved it.
    You have just to apply the following sap notes :
    1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
    769120 - Support Package for APPINT 200_620
    The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
    There is another sap note 689847, but you just apply this if the sap notes above described did not work.
    Paulo Correa

  • Why cant i open all my bookmarks in a new tab? only the ones visible above me, not the ones that show up when i click in the arrow to the upper right?

    why cant i open all my bookmarks in a new tab? only the ones visible above me, not the ones that show up when i click in the arrow to the upper right?

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • No portal, only EBPuFF06SUS, vendor how to reply the bid and auction?

    According to standard functions, vendor use portal to response bid invitation and auction, am I right?
    Our customer have no portal, only EBP＆SUS, if want to use sourcing functionality, vendor how to reply the bid and auction?  any solution on this case?

    Hi,
    Bidder logon to SUS. SUS has manu link for Bid Invitation. When bidder selects Bid Invitation link in SUS, application brings up the EBP ITS screen.
    + You have to set up bidder replication from SUS to EBP
    + Single Sign On should be setup from SUS to EBP
    + SUS bidder should have SAP_EC_SUS_BIDDER role
    Please check SUS customizing.
    SUS -> Master data -> Maintain Systems for Synchronization of User Data
    Regards,
    Masa

  • SharePoint - MS Word Document Only specific pattern allowed. Only data in the following pattern is allowed: ',*\S.*'

    We have a SharePoint 2007 document library setup with a custom template using MS Word. This template is a doc and/or a docx (we have used both and both have the pattern error). We are using the Document Information Panel in the document
    when opening to be filled in. One of the fields - Test - is a multiple lines of text
    field. When we use the Enter key a red dotted line appears. The message for the error appears below:
    Only specific pattern allowed. Only data in the following pattern is allowed: ',*\S.*'
    Does anyone know why this is? We need the ability to use the
    Enter key. We have MS Word at 14.0.4 and it does not have an issue with using the
    Enter key. Any later version of MS Word this issue occurs.
    SharePoint Configuration database version: 12.0.0.6608
    MS Office 2010 14.0.6029.1000
    Chris

    Hi,
    Did you installed some updates recently? Many users encounter this issue after installing KB2817537 or some updates released in Sept.
    This issue occurs because the regular expression used to validate the property doesn't allow for line breaks.
    Fortunately, DPKs attached to this bug have been successfully applied by the build lab.
    We are working on this issue and it will be fixed in future update.
    To work around this issue, please temporarily uninstall the
    KB2817537. If that wouldn’t work, please also uninstall
    KB2760758, KB276041 & KB2760411 and then test the issue again.
    Thanks,
    Steve Fan
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Dreamweaver CC just designed a form, looks goog in live, but can't import in iweb, only tekst is visible

    Dreamweaver CC form can not be transferred to iweb designed website, only tekst is visible in iweb, no buttons etc

    Sounds like you may have forgotten to upload the images and dependent files (like .css and .js) when you uploaded the page itself.
    Another possibility is you have used a page naming structure like MyPage.html but links to files with a naming structure like mypage.html. Many servers are case sensitive, so MyPage.html and mypage.html are different files to a server. To your local OS, they are the same file, so pages would work locally and suddenly break when uploaded.
    There are other possibilities, but without seeing the page, as Ben suggests, it's impossible to say what else could be going wrong.

  • Infopath throws error "only specific pattern allowed" when use regular expression for validation in schema

    This is MS info path question, I could not find specific forum for Info-Path So asking my question here
    I am creating Info-Path form from schema. In the schema, the filename has restriction that it can only have extension .pdf or .PDF. But while filling out the form even if I type filename with extension ".pdf", I still see error "only
    specific pattern allowed".
    Below is my schema I used to create form
    <?xml version="1.0" encoding="utf-8" ?>
    <xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
    <xs:element name="Document">
    <xs:complexType>
    <xs:sequence>
    <xs:element name="FileName" type="FileNameType"/>
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    <xs:simpleType name ="FileNameType">
    <xs:restriction base="xs:string">
    <xs:pattern value="^.*\.(pdf|PDF)$"/>
    <xs:minLength value="1" />
    <xs:maxLength value="128" />
    </xs:restriction>
    </xs:simpleType>
    </xs:schema>

    Hi
    This is the forum to discuss questions about Microsoft Office development. For your question, I recommend you post the question to the Answers forum for Infopath
    Microsoft Community for​ InfoPath​
    By the way, you can get support from here.  Support for Microsoft InfoPath
    Thank you for your understanding.
    Best Regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I make with a picture only the outlines visible?

    I don't come out of that, how I can only the outlines visible.

    Filter>Stylize>Glowing Edges>Image>Adjustments>Invert>Desaturate (if you want a black edge)>Levels to refine the edges.

  • Analysis Patterns to code

    I'm new to patterns. I'm having trouble "making the connection" from pattern to code. An example is if my analysis results in using the Party Pattern, then what does that look like when I code it in my program?
    Any advice is helpful. Thanks.

    An "Analysis Pattern" comes from Martin Fowler's book of the same name.
    Fowler took a bunch of common idioms he used at the whiteboard when he was fleshing out domain models for health care systems, accounting, etc., and captured them into class diagram "patterns". No implementation, hence no design. The idea was to duplicate "Design Patterns", but during the analysis process upstream of design.
    As you well know, the grandfather of all "Design Patterns" is GoF.

Maybe you are looking for