Portal Roles are not visible

Hi,
We have upgraged Portal (Nw 2004s) SP17 to SP18 ,But after upgradation portal roles are not visible for users and Portal adminstors (J2EE_ADMIN ) also.
Standard roles like System ,user and Content Admin roles also not visible.It shows only blank screen after login to portal.
It is critial issue .Please suggest how to solve this issue.
Thanks
Srikanth M

Make sure there are no errors in the browser in the bottom left hand corner. Also, are you using a fully wualified name to access the portal? When you were on SP17 were you using standard roles or did you make your own copy of the roles and assign your users to the copied roles?
If you navigate to the portal content studio directly, can you see the role contents?
After launching /useradmin and authenticating, paste http://host:50000/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fadministrator!2fcontent_admin!2fcontent_admin_role!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content?sap-config-mode=true into your browser and you are in the content studio.

Similar Messages

SRM Portal roles are not getting accessible

Hello SDN contributors,
I have a strange burning issue. Please help me out.
Issue:
When I assign any SRM Portal roles to users,roles are not getting accessible until I assign a custom ESS(HCM) role in the backend ECC system which is mapped with a portal ESS role.
After doing this only from Portal front-end perspective ,SRM users are getting access on SRM roles.
But I do not able to find out the possible reason behind this.
Please suggest me to get out of this issue.
Regards,
Sriram

Hello Bala,
First of all thank you for your response.
Yes , I'm sure that the back-end role is mapped to only ess role not to SRM roles.
Unable to find out the origin for this issue. Please throw some valuable suggestions on this.
Regards,
Sri ram.

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Work items are not visible under UWL in portal ?

Hi,
We are upgrading from SRM 5.0 to SRM 7.0.
We have observed one issue here. Workitems are not visible in UWL in portal.
But workitems are available in SAP inbox. i.e SBWP.
Completed items we can see in UWL.
Could you please let me know any idea on this.
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

Hi Venkatesh,
Can you please share the solution? Which base URL was wrong and where did you correct that?
Your help is really appreciated.
I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
Thanks,
Bhavik

After BI 7.0 Upgrade, Authorization Roles and profiles are not visible

Hi Gurus,
We have an issue with authorization roles and profiles are not visible for all end users with new Bex Analyzer (BI 7.0) tool. But still they can see these roles with old Bex Analyzer ( Bex 3.5) tool.
As a developer I have SAP_ALL acces and I can see all authorization roles in new BEx Analyzer (BI 7.0).
I verified in SU01 for user access and every are assigned there roles and they are green.
Do we need to add any new authorization object to fix this issue, please let me know
Thanks and appreciate your help.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Oct 26, 2009 4:41 PM

Hi Ganesh,
check the behaviour, if you assign
S_USER_AGR
   ACT_GROUP = "..name of the assigned role.."
   ACTVT = 03 (for "display")
b.rgds,
Bernhard

Changes to a Role are not Reflected

I have created a role with one BSP iView and assigned the role to a user. When the user logs in he can see that iView. Then I have added three more BSP iViews to the role. But these new BSP iViews are not visible to the user. The user had logged off and logged on again. I have deleted the role assignment to the user and then reassigned. Nothing is working. Can someone tell me what could be the problem? I will assign points to helpful posts.

probablly you may not clear the cache, just clear the cache and check it out.
to clear cache go to system administration -> navigation -> navigation cache.

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

Documents are not visible with layoutset AppBulletinBoardExplorer

Hi experts,
I created a km navigation iview with layoutset AppBulletinBoardExplorer. I created a new networklocation on my PC to the portal repository and upload a lot of documents (becasue a multiple upload from the portal is not possible). The documents are not visible in the iview. When Is change the layout set to ConsumerExplorer the documents are visible. A reboot did not help. If the documents are saved from the portal again, they are visible. Another layoutset or to upload file by file is also not an option.
How to solve this problem? .
gr
Joeri

Hi Simon,
thanks for your reply!
1. Have you tried mass upload via explorer into one KM folder then move the documents you uploaded into another area using the standard UI?
I have moved the content via KM content option, but problem still exist.
2. Have you checked the trace files on the portal to see if there is some error being logged that is not showing in the UI, but might give you a clue as to what is going on?
In the log there is a warning: user | ACCESS.ERROR"| /KM path | node_create_child. Everyone has read permissions.
3. Have you raised an support message with SAP?
not yet
4. Have you tried using the Portal Drive rather then just windows explorer? (probably won't make a different as I think it uses webdav anyway)
With the portal drive the same issue :-(.
It's something with the layoutset in combination with upload via webdav or explore. The documents are also available with a search
gr
Joeri

Components are not visible in personalization

Hi,
In iSupplier Portal, some page components are not visible for buyer address book. (Stack Layout: addressCreateUpdateStack) I even tried to change context, they are still not visible. How I can solve this issue?
Btw, the personalizations are just enable for a standart user. Can this cause the problem?
Edited by: user8627992 on 07.Oca.2011 03:38
Edited by: user8627992 on 07.Oca.2011 03:56

Try
begin
jdr_utils.listcustomizations(FullPathOfPage);
end;
this will give you all the customizations made to the page
for each line returned
try
begin
jdr_utils.printDocument(<linereturnedFromAboveProcedure>);
end;
Regards
Ravi

Titles are not visible, they show up on timeline as a grey box no text does not effect other events or projects

titles are not visible, they show up on timeline as a grey box no text does not effect other events or projects. could this have something to do with motion

Without seeing the timeline it sounds as if they've been off. Maybe you pressed the V or the role is switched off in the timeline index.

Re: Portal roles are Inconsistent

Recently my systems are upgraded from SP 13 to SP 16. Up to now EPA is working fine with SP13. But now I imported same EPA file in SP 16 system. In some machines some roles are working but same roles are not working in another SP 16 level systems. My Portal is not a FPN.
Regards
Narayana
Edited by: narayana on Dec 9, 2008 5:36 AM
Edited by: narayana on Dec 9, 2008 5:36 AM

Hi Michael,
My problem is solved by SAP support team. Below is the reasons and solution
When assigning a portal role to a user, permissions to the user on the
role are automatically created. These automatic permissions are called
Inner ACLs.
Sometimes, when transporting content between portals, the Inner ACLs arenu2019t created. This is why you could not see the role for the user.
After you logon to the portal with a super administrator user, change
the relative URL to : http://<server>:<port>/irj/servlet/prt
/portal/prtroot/com.sap.portal.admin.acleditor.listPermissions (you can
also do this through the URL http://<server>:<(>
<<)>port>/irj/servlet/prt/portal/prtroot/PortalAnywhere.Go and search
for "listpermissions"). After few minutes you should see a page that has the permission information of the portal. Scroll down all the way, if
you see a button on the bottom, click on it.
Thank you Michael and Others
Regards
Narayana

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

No portal roles are assigned for this user.If this problem persists, contac

I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

Balu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu

Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

Dear Experts ,
The Test Server was refreshed around mid-June 2011 with data of
Production Server. The follow-on documents are not visible for the
invoice documents in MIRO in TEST server due to value in tables
BKPF,RBKP : field : AWSYS = PRD300 .
The newly created Purchase Orders after the refresh, the accounting
documents can be seen for the Goods Receipt (MIGO_GR-display) and
Invoice documents (MIRO).
we had already raised this issue in March & got the feedback from SAP
as shown below.
accordingly we have developed & run the program "zzlogsys2" which
updates the Logsys/Awsys field from PRD300 ( of production server ) to
that of the current server i.e. TST300 as required.
after which the FI documents for the material documents are visible in
MIGO,but follow-on documents are not visible for the invoice documents
in MIRO.
we have Checked notes 781498 and 28958 to see if the logical system is
correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
also as we are currently doing for tables MKPF & BKPF.
But to have clear picture as to what we are doing is correct , pl
advise about the following :
1) Is it a correct process done by our SAP-Basis team , that every time
any Server ( e.g. Test or Quality ) is refreshed with Production server
data, the Field AWSYS in various transaction tables gets value as
"PRD300" which then is required to replaced by running program such as
ZZlogsys.
REPORT ZZLOGSYS.
TABLES: T000, MKPF.
DATA: NEW_SYS LIKE MKPF-AWSYS.
PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
NEW_SYS = T000-LOGSYS.
CHECK NOT NEW_SYS IS INITIAL.
UPDATE MKPF SET AWSYS = NEW_SYS
WHERE AWSYS = OLD_SYS.
WRITE:/ 'Number of updates: ', SY-DBCNT.
2) if the above process is correct & normal , then which are the other
tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
needs to be updated the value of field "AWSYS" in the same way
replacing value "PRD300".
3) if the process in point no. 1 is not correct , then what is the
correct process that the Basis team can do while refreshing any target
server with production data so that target server retains its value in
Field AWSYS & not showing "PRD300".
With 3 servers TEST,DEV & Quality , recently refreshed with production
server to bring all servers in Sync for a HR patch application, we have
this situation now in all 3 servers .
Thanks in advance ,
Anil Shanbhag

It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

Portal Roles are not visible

Similar Messages

Maybe you are looking for