No connection to Integration Builder (only generic data visible)(SPROXY)
Dear All,
I am Establishing connection between BW and XI.
I am getting "No connection to Integration Builder (only generic data visible)" error while opening SPROXY T-Code, also it shows user Menu Disable.
Please suggest me to solve the error.
thanks,
RP
hi RP,
I too had same problem, below are the things taken care and finally fixed.
1. SLDAPICUST settings pointing to SLD system & port
2. Create SAPSLDAPI & LCRSAPRFC RFCs pointing to program ID created with SLD and XI system using VA (JCo RFC provider)
3. Set the require settings with RZ70 pointing to XI system name & HTTP port
4.Create ABAP based HTTP RFC pointing to Target system (XI system ) with HTTP port (smicm-goto-services) and path prefix with "/sap/xi/engine?type=entry" (without quotes). Ensure this RFC is existing at both the ends (source & target).
5. If incase all ready the Technical System & Business existing at SLD for your business system, you may require to remove them and add them back/manually.
Please let me know if any more info require.
Thanks
Chandra
Similar Messages
-
No connection to Integration Builder (only generic data visible)
hi,
I am facing one problem in IDES system when connecting to proxy from my XI system.
No connection to Integration Builder (only generic data visible)
For this when I tried to create rfcu2019s type G and H in the IDES system, in that both rfcu2019s when testing it is giving the following msg.
ICM_HTTP_CONNECTION_FAILED
Is anything I need to do before connecting to RFCu2019s type G and H.
thanks in advance.Hi,
Check this URL:
SAP NetWeaver Troubleshooting Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Thanks,
Boopathi -
Abap ProxiesNoconnection to Integration Builder(only generic data Visible)
When we are executing SPROXY from R/3(ECC 6.0)
Getting components ie connected to XI Integration Builder
But when we are executing SPROXY from XI Server , we are not getting connection to Integration Builder, Getting error message like No connection to Integration Builder (only generic data Visible)Hi Satish,
Make sure that you are having the following RFC's successful from your ECC/BW system towards your XI Integration Builder.
1) LCRSAPRFC. - type T
2) SAPSLDAPI - type T
3) PI_INTEGRATIONSERVER - type H
Make sure that settings are done in SLDAPICUST tcode.
Check whether the ICM is running & HTTP port is active in SMICM.
please check the below link as well.. it will be more helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?QuickLink=index&overridelayout=true
Regards,
Dino -
SPROXY: No connection to Integration Builder (only local data visible)
¡Hola!
When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server. I also checked that the parameters in the Exchange Profile were correct.
Transaction SLDCHECK is working ok. The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
1. The address of the Integration Builder must be stored in the R/3
System
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
Result: OK: Address maintained
2. The HTTP connection of the R/3 application server must function
correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
Result: HTTP communication functioning
The following 2 steps return an error:
3. The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
Result: Integration Builder data not understood
4. Proxy generation must correctly interpret the data of the
Integration Builder
==>Check with report SPROX_CHECK_IFR_CONNECTION
Result: Integration Builder data not understood
I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system. Can someone please help?
Thanks and Regards,
CarlosCarlos,
Check Global Configuration data in R3 using TC : SXMB_ADM.
You need to set values..Role of Business System : Application System and Corresponding Integration server details.
Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
Nilesh
Message was edited by:
Nilesh Kshirsagar -
No connection to integration builder (Only local data visible)
Hi,
I am created Interface objects in IR but it is not reflected in SPROXY (ECC 5.0). It is showing like this no connection to integration builder (Only local data visible) please can you help me necessary configuration.
Regards,
-Prabakar.AHI Prabakar,
the Business System SM59 destinations LCRSAPRFC & SAPSLDAPI
should have the Program IDs
SAPSLDAPI _UNICODE.
LCRSAPRFC_UNICODE
See the online help for connecting Biusiness Systems
[Connecting Unicode Business Systems|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
see also
[Connecting to the Integration Server|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
Regards
Kenny
Edited by: Kenny Scott on Feb 25, 2010 5:02 PM -
No Connection to Integration Builder (only local data visible): from R/3
Hi,
I am also facing the same problem. I maintained the RFC destinations in R/3 properly. I did Test Connection and for RFC destination its working fine. I maintained proper values in SLDAPICUST. When I run SLDCHECK I got the following error.
<b>Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations</b>
Otherwise access to XI Profile works fine. But then when I run SPROXY I am getting the same message <b>No Connection to Integration Builder (only local data visible)</b>
I also checked the following report =>Check with report SPROX_CHECK_IFR_RESPONSE (3rd option) its giving informational message <b>Integration Builder data not understood</b>, for the 4th report ==>Check with report SPROX_CHECK_IFR_CONNECTION, it is also showing the same above information message.
Looking forward for the response,
Appreciate your help,
Thanks and Regards,
JagadishHi,
I had the same problem and I have already solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa -
SPROXY:No connection to integration builder
hi friends..
While i am trying to access the transaction <b>sproxy</b> in my receiver R/3 system i am getting message saying "<b>No connection to integration builder</b>(only local data visible)"..
I searched in xi forums also.. i couldn't find any solution for that.. Please anybody an help me .. to solve this problem... I am trying to solve last three hours.. Please help to solve this issue...
Thanks friends
kumarHi Kumar,
The same provlem was solved here
No connection to Integration Builder
To understand in detail have a look at this
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Topic: 8 Connecting Business Systems with an Integration Engine to the Central Integration Server
Regards,
Prateek -
We are unable to connect to Integration builder through VPN.
Hi,
We are unable to connect to Integration builder through VPN.
Below are the errors we get:
a. In two of the PI 7.0 Systems we get:
i. Cannot open connection on host x and port y.
ii.com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x and port:y
iii. java.net.SocketException: Malformed reply from SOCKS server
b. In the other two PI 7.1 systems we get:
i. MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
ii. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port:y]
iii. com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port: y
The hosts and ports are accessible. (Telnets and tracerts work fine for all the systems)
We are able to access the SLD and Runtime workbench on all the environments. However, Integration Builder tools are not accessible.
Any clue on what the problem might be?
Thank you,
Siva.Hi Siva,
When you execute SXMB_IFR from PI, do you get Integration Builder page?
Are you trying to directly access the PI server by the known URLs?
Also, Following links may be of your use:
Integration Builder -Configuration is not openning?
Re: unable to logon to Enterprise Services Builder or Integration Builder
Regards,
Nipun -
SPROXY No connection to Integration Builder SLDCHECK working okay
Hi,
In R/3, when I run SPROXY transaction, I get "No connection to Integration Builder ".
I have gone thru blog
[How do you activate ABAP Proxies? |How do you activate ABAP Proxies?]- Activate Proxy.
I have done all the config in R/3 and sldcheck is working fine.
I have also edited "Integration Engine Configuration".
I have added 2 entries in Specific Configuration.
RUNTIME ENGINE_TYPE LOC
RUNTIME IS_URL http://xidpro100:8000/sap/xi/engine?type=entry
But still getting this error.
Regards,
Anirudh.Hi,
check, have you maintain values in sldapicust.
and check the host file entries in os level.
check the rfc is working properly INTEGRATION_DIRECTORY_HMI
In integration engine configuration role of business system as Application sytem
and corresponding integ server as dest://SAPISU_XID
check this values are there
then get back we will resolve this issue..
Regards
Vijay
Edited by: vijay Kumar on Sep 20, 2008 8:28 AM -
No Connection to Integration Builder in SPROXY transaction
Hi everyone!
I've gone through the blog ; /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Checked all my configuration and everything seems to be ok!
But in my business system (ECC6.0/webas 7.0), I'm still getting the "No Connection to Integration Builder" in transaction SPROXY!
When I run SLDCHECK, everything is OK! Checked SM59 connections = OK!
Can you tell me what's missing in this case? Do I need to activate the XI profile on ECC6?Hi again,
Did the test connection in SM59 and got the following response;
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Empty HTTP query received; message processing not possible</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Regards, -
No Connection to Integration Builder
I have connected one our SAP Systems to our XI system in the XI technical and business landscape.
Whats weird is that when I log into the system that is connected and try to run the transaction sproxy, I get a message saying that there is no connection to the integration builder.
I do now know how to proceed.
Thoughts anyone?Hello
I have a similar problem. I am trying to configure my Application System (not XI) so that SPROXY works.
My systems are:
- Application System asystem -> host = ahost, port = aport
- Integration System isystem-> host = ihost, port = iport
At first I opened http://<ahost>:<iport>/exchangeProfile. Because I received errors I went to "Connections" (http://<ahost>:<aport>/exchangeProfile/connection.jsp) and entered the connection parameter for my isystem.
Afterwards my Exchange Profile was filled with the entries of my isystem. This means:
com.sap.aii.connect.repository.name = ihost
com.sap.aii.connect.repository.httpport = iport
com.sap.aii.connect.repository.contextRoot = rep
com.sap.aii.connect.integrationbuilder.startpage.url = rep/start/index.jsp
Is this correct?
Any help is appreciated
Best regards
Markus -
No Connection to Integration Builder (Local Data)
Hi All,
I am having problems in proxy configuration. When i run sproxy it says no configuration data found. I have done all the settings required for the same(think so).
I have created LCRSAPRFC, SAPSLDAPI tcp/ip connection in the business system(R/3) and also a http connection (XI_INTEGRATIONSERVER) which im mentioning in the integration engine configuration(SXMB_ADM) as http://xi_integrationserver.I have selected the role as Application System.
SPROX_CHECK_IFR_ADDRESS & SPROX_CHECK_HTTP_COMMUNICATION works fine.
But problem with SPROX_CHECK_IFR_RESPONSE & SPROX_CHECK_IFR_CONNECTION.
This report SPROX_CHECK_IFR_RESPONSE says...
says HTTP error (return code 400, message "ICM_HTTP_CONNECTION_FAILED".
When i check the http connection XI_INTEGRATIONSERVER.
It also gives the same error.
These are the settings which i have done in the RFC.
Target Host : xiserver
Port : 8000
Path Prefix : /sap/xi/engine?type=entry
In the logon tab im specified
xiappluser n the password.
LCRSAPRFC, SAPSLDAPI Connections works fine in the Business System (R/3)
I have also tried this link in internet explorer..
http://xiserver:8000/sap/xi/engine?type=entry
It then asks for login id n password ..
n it doesnt accept anyuser..be it xisuper.xiappluser.xirwbuser..xiisuser..
Can anyone also please letme know which user id do i need to use or which role do we need.
Please lemme know where im going wrong.
Cheers,
Sumit
Message was edited by: Sumit KhetawatHi ,
In the technical settings i gave the IPAddress inplace of the host name. Now the connection works.
But the thing is that when i click on test Connection it asks for the username,password,client. Even though i have mentioned those in the logon parameters.
I checked by using xisuper but it still asks for username and password.
Again i checked using the report SPROX_CHECK_IFR_RESPONSE. It still gives the same error.
Maybe cause it isnt getting the username & password.
Sumit -
ECC SPROXY Error: No connection to Integration Builder
Helllo Experts,
I am trying to run transaction SPROXY in ECC to connect to PI ESR and getting error:
Do I need to create any PI users in ECC?
Thanks.Resolved - deleted entries in table: SPROXSET
-
PI 7.11: Import of CTS+ transport fails (Integration builder only)
Hi,
I've released a transport from DEV to QUAL system.
I've imported via STMS.
But I don't see the transported objects.
The imported change list is already closed and I cannot activate the contained objects.
There's no open change list available for my user.
When I try to transport those objects again, I get an error in STMS:
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Unable to transfer object Configuration Scenario SetEmployeeSOAP (DirContext) to change list 'XI 7.1 Import' (c6a9ea7b-57db-11e1-a930-000025876142) since object is already in your change list 'XI 7.1 Import' (e1586c72-57c2-11e1-bf9c-000025876142).
How can I activate the objects contained in the mentioned change lists?
Thanks in advance!Unfortunately, I've crowned too early
The target systems are not filled in correctly.
We have a 3-tier environment (DEV, QUAL, PROD).
I've setup the same SLD settings in SLD in DEV and QUAL system.
SAP_DEV has target SAP_QUAL and SAP_QUAL has target SAP_PROD.
But in the scenario that I've imported into PI QUAL it didn't replace SAP_DEV with SAP_QUAL (e. g. in CC, Receiver determination etc.).
What can be the reason for that?
Are my target settings not correct? -
SPROXY - No connection to the Integration Builder
Hi,
While generating a ABAP Proxy the communication between R/3 system and XI 3.0 repository did not work; transaction SPROXY displayed the following error message, 'No connection to the Integration Builder, only local data is visible'.
Can someone please help me out.
Regards,
JigishaHi,
I had the same problem and I have solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa
Maybe you are looking for
-
Hi, In our weekly EWA report for XI, sometimes we are missing the compleJava Performance Reports section, has someone faced this issue? Thanks in advance.
-
Common diemsions and more then one fact table join problem
Hi, I have 5 common dimension and 3 fact table which in the same subject area. When I want to display results from more then one fact table sending database then query more then one and I think BI server join this two different result on OBI server.
-
Essbase DataExport to relational: where to define the dsn?
I am running Essbase 11.1.1.2, and using DataExport in a calc to generate a flat file. Now I want to push the data into a relational table using: DATAEXPORT "DSN" "dsnName" "tableName" "userName" "password" What do I need to do to get the 'dsnName' r
-
New Appointment creation in Meeting Room exception
Dear KMC experts, I have a problem while creating new appointment in the collaboration room based on template "<b>Meeting Room</b>" on SAP EP KMC SPS 14. When I fill in all the information about the appointment and click on Send button, an exception
-
I lost all of my information from my phone....I didn't back up before plugging in