Big reports and errors

I have to genarate realy big reports (10 MB or greater) using WebServices as data
sources
Is there any way of generating this report in parts and then marge this parts
in one big report?
If something fails (for example problems with network connection) I don't want
to start all from begining, and I want to use same partial results of previous
report genaration
thanks for help
Rafa³ Paj¹k

In the current release of LD, if part of the query fails, the whole query fails.
If you want to have the pieces individually, you will need to write individual
XQueries for each part. You can create one result by assembling the parts in an
XQuery that takes each of the parts as a Complex Parameter Type.
http://edocs/liquiddata/docs81/admin/userdefineddatatype.html
- Mike
"Rafa³ Paj¹k" <[email protected]> wrote:
>
I have to genarate realy big reports (10 MB or greater) using WebServices
as data
sources
Is there any way of generating this report in parts and then marge this
parts
in one big report?
If something fails (for example problems with network connection) I don't
want
to start all from begining, and I want to use same partial results of
previous
report genaration
thanks for help
Rafa³ Paj¹k

Similar Messages

Error Logging in B2B Business Message Status Reports and Error Reports.

Hi,
Could someone please let us know as to how the error messages are being shown up in the b2b frontend in the Business Message Details Report and Error Reports.
In some of the cases the error message logging is not happening properly and even against the valid transaction block the entire iAudit Report or the B2B Analyzer report is getting posted .
In some cases the error message is logged as AIP-51505: General Validation Error (for the transaction block which is valid and having no errors)
Is there any way from the b2b backend these error messages and business messages could be traced or is there any other way wherein the proper and relevant error messages could be tracked from B2B.
Thanks
Sachin.

Hello,
Business message status reports identify business message instance details.These details include the sending and receiving trading partners, exchange protocol,document protocol, business action and its state, message date, and message details.
Error status reports identify error message details. These details include the error code, error text, business message identification, message date, and message details.
Please fix up a telecon to 918041086150 for further discussion on the same.
Rgds,Ramesh

Where to find the migration reports and errors

i am using Oracle SQL developer 3.0 for migrating MS SQL 2008 to oracle using migration wizard,after clicking on finish the tool throws the null as error window and asked me to look into migration reports. where should i find the migration reports and errors
KK
Edited by: 860986 on May 25, 2011 9:33 PM

Log into the SQL Developer Migration repository and you get the list of Migration Projects.
Click on the project you're interested into and on the right side you get a pane with Status, Summary, Analysis...
The Summary pane shows you how many objects SQL Dev migrated.
You also have Capture isues showing you the issued during the capture phase as well as Conversation Issues etc.

File Manager Reported and Error

I am trying to save a file and I keep getting a message :While attempting to access "-TemporarySaveFile-" the File Manager reported an error.
How can I save the file...or do I have to restart the computer and lose everything?

What program? I don't think I've ever seen the term "File Manager" used wrt Mac OS except in comparing Finder to other OS or third-party file managers.

Labview 2011 NI Report and error 7

I know this topic has been cover in this forum many times, but I just can’t get it working.
Recently, we have updated our labview from 8.2 (Window XP) to 2011 sp1 (Window 7), and of course, NI report stops working.
In our software, we have a project that eventually gets compile into a DLL (Not AN .EXE, THIS IS NOT AN EXECUTABLE). In this DLL, we modify an excel spread sheet. As a result, we need the NI report tool kit.
Now I know that you would have to manually include the two folders (NIReport and LVclass)in your project in order for this to work in labview 2011, which I did by following the link below.
http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument
I made sure that the two folders were “Always Included”, and not using the labview 8.x file layout. After the compiling has been complete, one DLL was created (with 4 other files, which is good because I only want one DLL). I assumed that the NI report tool kit is included in the build since I selected “Always included”.
After that I ran my main top level vi. The main top level vi tried to access the DLL, and I got error 7,
Get LV Class Default Value.vi<APPEND>
<b>Complete call chain:</b>
Get LV Class Default Value.vi
Test.vi
<b>LabVIEW attempted to load the class at this path:</b>
C:\BUILD PATH\DLL NAME.dll\1abvi3w\vi.lib\Utility\NIReport.llb\Excel\NI_Excel.lvclass
Now I assume this might be caused by two reasons. The path is incorrect or the tool kit wasn’t included.
I have been working on and off with this problem for weeks and still can’t get it working. I am guessing the path is incorrect, but I have manually changed the path to something different but got no luck. Any suggestions?
Solved!
Go to Solution.

Hi,
Thanks for the reply.
The reason I didn't select "use Labview 8.x file layout" is because it will also create 10 extra support folders (I think this is due to name conflicts in the DLL directory) after compiling the project. This is not an acceptable solution for my customer since no one would want a DLL that comes with so many extra files.
And yes, I am aware of the file layout after Labview 2009. However, the path to NI_Excel.lvclass (C:\BUILD PATH\DLL NAME.dll\1abvi3w\vi.lib\Utility\NIReport.llb\Excel\NI_Excel.lvclass) was provided by “Excel class path.vi” (vi.lib\Utility\NIReport.llb\Excel class path.vi). In “excel class path.vi” it checks to see if the application is using the 8.x layout or not.
I switched to “use Labview 8.x file layout” just for testing reasons but it still doesn’t work. The file path for NI_Excel.lvclass is now C:\BUILD PATH\DLL NAME.dll\Excel\NI_Excel.lvclass (provided by “Excel class path.vi”). I also hard coded the path to C:\BUILD PATH\DLL NAME.dll\NI_Excel.lvclass and that doesn’t work too.
I have created a simple project to demonstrate my problem. Copy the attached folder to your desktop and you will see a folder named “Excel”. Open the “excel Test” project and build the DLL, check the build path and make sure it’s building to “Desktop\excel\Exceltest”. After that go to the DLL TEST folder (\Desktop\excel\DLL TEST) and run DLL test.vi. Make sure the path to the DLL (on the block diagram) is correct and run the vi. You should see the error I am talking about.
Thanks,
Attachments:
excel.zip ‏19 KB

Crystal Report and Log4net error 1.2.10

Hi at all,
I have problem on Crystal Report and log4net.
It happens when I deploy the Web applications on the server.
I'm using Visual studio 2013 update 2, and I'm using log4net 2.0.3 (1.2.13) and I'm using CRforVS2013_13_0_10, the last.
When I deploy my application on the target machine, where I have also installed the runtime 64 bit for Crystal Report, I found this error:
ERROR 2014-07-31 16:26:42,721 1528053ms 8Euro                  - IP:192.168.0.38    - HOST:192.168.0.38 DumpWebRequest                           - ERROR: Exception of type 'System.Web.HttpUnhandledException' was thrown.
Exception StackTrace:   at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ERROR: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.
ERROR: Could not load file or assembly 'log4net, Version=1.2.13.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Exception StackTrace:   at CrystalDecisions.Shared.SharedUtils..cctor()
ERROR: Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Not able to extract code, error:Value cannot be null.
Parameter name: source
Exception StackTrace:
On my local Visual studio it works, works fine.
But when I'm deploying on Server, 2008 win 64 bit, I found this error.
I've tried everything, I've installed also the runtime 64 bit on the target/server machine.
The problem is that the log4net is not registered in the windows\assembly directory on the target server ? Do I have to use the Gac util to register the log4net dll assembly ?
Please help me, It one day that I'm facing this error, but I'm not able to solve.
Regards
Vittorio

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Reporting Services Error after Interactive sorting and drill down in pps

Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

5.0 won't work - extensions message is "localized string not found". When I force it to try to load a new window it shows a gray screen with the bookmarks on top then immediately closes and wants to report the error. Has been this way since 5.0 came out.

I first tried downloading Safari when the 5.0 update came out last year. When I choose the app in the dock, I get the blue top bar (Safari, File, etc) but nothing else loads. I uninstalled the app and tried again several times, but no success. For over a year now I've used Firefox as a result. Today I thought I'd try again, but same results. When I choose "new window" in the file menu, I get a small gray window with my bookmarks on top, then in a few seconds, the app quits unexpectedly and the report an error screen appears. I've unchecked all the languages in the information area for the app, cleared all history, cookies, and cache. Still the extensions tab in the preferences area has "LOCALIZED STRING NOT FOUND" in 4 places. It won't show what that means when I click the "?". Will I ever be able to use Safari again?

Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
-> Profile in use
* [http://kb.mozillazine.org/Profile_in_use]
Check and tell if its working.

Adding a Subreport to existing report and getting this error, "Unable to connect: incorrect log on parameters"

I have taken on an existing vb.net project done in Visual Studio 2008 with crystal reports version Crystal Report XI.
The reports on their own work very well. Problem is I need to add information to my report which is a 'many-to-one' situation where for each Project Id that I am displaying I need to display several attached documents and the report I am working on is for several Project Id's.
I figured this would be a perfect situation for a SubReport. I created a separate report which calls a stored procedure to get all of the Attached Documents for a specific Project Id. I thought if I were to add this new SubReport to the Original Report and link the Project Id's, easy-peazy, I would be done.
This is not the case. I have vb code that loads the Original Report with a stored procedure and when this code runs with the setup I described above it fails when it is creating the final report with the following error:
Logon failed. Details: crdb_adoplus : Object reference not set to an instance of an object. Error in File C:\~\ProjectDescriptionReport {6BA19F79-2A12-4826-B1F6-456EF799963B}.rpt: Unable to connect: incorrect log on parameters.
I have no specific connections in my vb code for the reports. If I do not add the subreport to the main report, it loads correctly, so I know the error is caused by the subreport.
This is the code that creates the original report (sorry for dumping the code here, i just thought it would be easier to see all the code) :
Public Function LoadReport(ByVal inProjectNum As Integer, ByVal strProjectName As String) As DataTable ', ByVal inFiscalYear As Integer, ByVal inCompany As String) As DataTable
        Dim cnn As SqlConnection = Nothing
        Dim cmd As Data.SqlClient.SqlCommand
        Dim obj As New clsDataClass
        Dim dataAdapter As SqlClient.SqlDataAdapter
        Try
            LoadReport = New DataTable("DescriptionReport")
            cmd = New SqlCommand()
            cnn = obj.Create_Connection()
            With cmd
                .CommandType = Data.CommandType.StoredProcedure
                .Connection = cnn
                .CommandTimeout = "60"
                .CommandText = "usp_GetProjectGroupSpecsCR"
                .Parameters.AddWithValue("@ProjectNumber", inProjectNum)
                .Parameters.AddWithValue("@ProjectName", strProjectName)
            End With
            dataAdapter = New System.Data.SqlClient.SqlDataAdapter
            dataAdapter.SelectCommand = cmd
            dataAdapter.Fill(LoadReport)
            Dim oRpt As New ReportDocument()
            oRpt.Load(Server.MapPath("ProjectDescriptionReport.rpt"))
            oRpt.Refresh()
            oRpt.SetDataSource(LoadReport)
            'oRpt.OpenSubreport("AttachmentsReport").SetDataSource(LAR)
            oRpt.SetParameterValue("inProjectNum", inProjectNum)
            oRpt.SetParameterValue("strProjectName", strProjectName)
            oRpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, True, "Projects_DescriptionReport") 'inCompany & "ProjectsReport_Description" & inFiscalYear) <-- Line where the error occures.
What I need to know is what is the proper way to add a subreport to a vb.net application?
From the ways I have tried it is clearly not working and I am out of ideas. I am fairly new to Crystal Reports and this way of coding it.
Any help for this would be greatly appreciated, I've been stuck on this for a while and am finally reaching out to the Crystal Report Specialists.
Thank you in advance,
Bryan

Hi Bryan,
You may want to check the Connection properties also. I think the MS Data.SqlClient.SqlCommand is using the MDAC driver, or could be modified.
If you are connecting to SQL Server 2008 or above you should be using the SQL Native 10 or 11 Client.
As Dell suggests have a look at the samples and if you can use a DSN ( 32 bit or 64 bit ODBC Admin )
Also search for "CRlogger", you'll find how to enable CR's database logging component and may help show you what part is failing.
Don

HT4910 My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

Error exporting report with sub report and parameters

Post Author: joncombe
CA Forum: JAVA
I am using the JRC to export to a PDF file a report that has a sub report within it. Both the main and subreport connect to an Oracle database via an Oracle ODBC connection and both share a single parameter, RUN_ID. I need to set a value for the parameter in both reports. If I don't do that I get this error:-com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Some parameters are missing valuesI have the following code to update the parameters in both reports. ParameterField thisParameter1 = new ParameterField ( ); ParameterField thisParameter2 = new ParameterField ( ); Values thisValue1 = new Values ( ); Values thisValue2 = new Values ( ); ParameterFieldDiscreteValue thisParamDV1= new ParameterFieldDiscreteValue(); ParameterFieldDiscreteValue thisParamDV2= new ParameterFieldDiscreteValue(); thisParameter1.setReportName(""); thisParameter2.setReportName("DQA_GER_Adressverification.rpt"); thisParameter1.setName("RUN_ID"); thisParameter2.setName("RUN_ID"); thisParameter1.setType(FieldValueType.numberField); thisParameter2.setType(FieldValueType.numberField); thisParamDV1.setValue(254); thisParamDV2.setValue(254); thisValue1.add(thisParamDV1); thisValue2.add(thisParamDV2); thisParameter1.setCurrentValues(thisValue1); thisParameter2.setCurrentValues(thisValue2); parameterFields.add(thisParameter1); parameterFields.add(thisParameter2); ReportStateInfo repStateInfo = new ReportStateInfo(); repStateInfo.setParameterFields(parameterFields); reqCont.setReportStateInfo(repStateInfo); With this code in place I have found that if I run using the JRC supplied with Crystal Reports for Eclipse I get the following error:-ERROR - QueryEngine error: verify database failed.ERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)ERROR - Failed to export reportcom.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unexpected exception thrown at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Caused by: java.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) ... 17 moreERROR - JRCAgent1 detected an exception: An error occured while exporting the report at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Error exporting report : report. Error is ReportSDKException: An error occured while exporting the reportAn error occured while exporting the reportcom.businessobjects.reports.sdk.d.byte(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) With the JRC supplied with Crystal Reports XIR2 I get this error:- INFO - PdfExporter: serializing pdf document and cleaning upINFO - Disk Exporter: verifying export to destinationERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.i.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)INFO - Disk Exporter: finalizing export to destinationERROR - JRCAgent1 detected an exception: java.lang.NullPointerException at oracle.jdbc.driver.T4C8Oall.getNumRows(T4C8Oall.java:870) at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:811) at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1037) at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132) at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1687) at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1653) at com.crystaldecisions.reports.queryengine.driverImpl.o.ew(Unknown Source) at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.d4(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.f(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.dP(Unknown Source) at com.crystaldecisions.reports.queryengine.av.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.do(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.try(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.for(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.a9.if(Unknown Source) at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.g(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.i.g(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.null(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.az(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.i.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)I believe the error is that the SQL query in the main report is being updated with the RUN_ID but the SQL in the sub-report is not. I am not sure why the update to set the RUN_ID in the second SQL query fails, but it seems to me the JRC is not detecting it as a missing parameter and is passing the SQL including {?RUN_ID} to Oracle, causing the JDBC driver to fail with this NullPointerException. I think this because further up in the log I see this:-INFO - Executing query: SELECT v.* FROM v_ger_main vwhere v.run_id = 254INFO - Verifying databaseINFO - Executing query: SELECT h.* FROM v_ger_av_ls_tagging hwhere h.run_id = {?RUN_ID}ERROR - QueryEngine error: verify database failed.Both connections are from the same database, but the first has the updated value (254) whilst the second query still seems to have the parameter and so fails to verify.Can someone suggest how I can fix this problem or if I have missed something that is required?Thanks.Jon.

Post Author: Ted Ueda
CA Forum: JAVA
What happens if, instead of passing in parameter field values, you pass the report source object to the viewer (ReportViewerBean for stand-alone or CrystalReportViewer for web)? The viewer should introspect the report for the parameter fields and bring up a parameter field entry dialog box. Does such a dialog box come up? Is only the main report parameter field queried for, or both main and subreport paramter fields? When you enter correct values for the field, does the report display?
Hopefully, the above should narrow down the issue.
By the way, JRC doesn't support ODBC connections, only Java based connectivity such as JDBC, JavaBeans and XML. If you have a report with ODBC, then it looks for a JNDI connection with the same name.
Sincerely,
Ted Ueda

My application while running in playback throws fault error report and it needs to be closed programmatically by killing the process.

My application throws some fault error report and pops up a screen needing user response.
I would like to kill that process once it is thrown. Is there a way I can do it programmatically
this issue happens in the middle of start() and close() method

Hi,
Based on your description, I think that your issue and requirement is more related to programming rather than Visual Studio tests.
Test Tools in Visual Studio 2010 and 2012 forum is used to resolve and discuss VS testing issues. I am afraid that your issue is out of the support range of this forum. I suggest consulting this issue on some development forums based on the
type of your application.
If you are working with Windows Forms app. please consult on Windows Forms Forum:http://social.msdn.microsoft.com/Forums/windows/en-US/home?category=windowsforms
If you are working with WPF app, please consult on WPF forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wpf
If you are working with ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Visual Studio Language Forums also may help you:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vslanguages
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion

Hi
I am unable to access Reports and Analytics . It throws a Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion
I have all the required roles and also BIADMINISTRATOR ACCESS still I am unable to login to Reports and Analytics. I have cleared the cache also.
My collegue who has the same roles is able to access it.
Regards
Avinash

I created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya

Big reports and errors

Similar Messages

Maybe you are looking for