Billing plan appears suddenly in ond of the orders

Dear All,
i have a situation where mile stone billing is suddenly appearing in one of the sales orders, where as if i check before or after orders none  of them have on the same day or before or after. since we are using billing plans for other countries and same document types are used for all the countries. but for this country no billing plan is determined, but yesterday it appears in one of the orders.
could you please suggest how shall i start the investigation.

Dear king fire ,
As lakshmipathi has already pointed out, billing plan is triggered by the plan assignment either in the header level (vov8)
or if the plan is assigned to the item level.
Check the confinguration changes/ change requests made during the time of this order creation.
I do not think user will be able to trigger a billing plan directly in the sales order.
Thanks & Regards,
Hegal K Charles

Similar Messages

  • Billing plan (Downpayment) for saved and open sales orders at header level?

    Hi gurus,
    I have configured billing plan in my SD environment at Item Level.
    I want to change it to header level.
    Questions:
    1- When I make the changes to update the system to have billing plan at header level for future sales orders, is that possible for me to change all my saved orders and open orders with the new settings so that I can also have those saved and open orders with a billing plan at item level?
    2- If that scenario is not possible, could we for example copy the data of a previously saved or open sales order into a new sales order with the new customizing (Billing plan at Header level?)
    Thanks for your input
    Kind regards
    Chris

    Hi
    I am afraid you cannot do that converstion for the existing orders. BP at header level are enabled at teh document type level, while BP at item level is done at item category. So both are independent. Mostly it is advisabel to use BP at item level only.
    If you are already using item level BP, and want to mvoe to header BP, then only future transactions can be executed with BP at header level. Existing item level BPlans will remain so in the system.

  • Billing Plan Start Date not copied to Sales order from Service Contract

    Hi
    We are developing a process of Creation of Service Contract and then a order confirmation.
    Now based on the Order Confirmation will bill based on the Bill Plan.
    The Bill plan start date in contract header is not flowing to Sales Order header while creating with reference.
    Then navigating to Header Billing plan and if we input the date the billing plan dates are displayed.
    We checked the copy control settings and seems like the date is not copied.Is this a standard behaviour.
    If so then do we have any work arounds to achieve the same. Because the contract start date can change before confirmation.
    So business wants a sales order confirmation to be created after contract creation and bill periodically as per the Sales order instead of contract.

    Hi,
    Appreciate ur quick response. But instead of FKDAT i need the FPLA-BEDAT to be flowed to Billing Plan.Right now iam entering the following date manually at header.Instead if it copies from Contract header then manual entry could be neglected.
    Is it possible with the same routine to code with the above mentioned FPLA-BEDAT.

  • Maintenance Plan - Tasks are not executing in the order they were created

    I've created a new maintenance plan to perform differential backups but the tasks I created don't necessarily seem to execute in order all the time.  These are the tasks and order assigned when I created the plan using the Maintenance Plan Wizard:
    Back Up Database (Differential)
    Clean Up History
    Maintenance Clean Up Task
    Here's the deal...When it executes in the order they were created (above), all my old backups are deleted successfully.  However, there have been instances where, for example, the Maintenance Clean Up task executes before the
    Clean up History task.  When this happens, only one of my backup files is deleted successfully but not the second (I have two .bak files needing to be removed).  Furthermore, I noticed that the backup that wasn't deleted when it should
    have gets deleted at the next increment when new backups are created.
    Again, this does not happen when the tasks run in the sequence shown above.  Only one old backup gets deleted (instead of two) when one of the above item is out of sequence.  Strange behavior to say the least.
    Any feedback on this will be appreciated!

    If you do not set up precedence constraints it runs all tasks at the same time.
    Please see "8. To define a workflow between tasks:"
    http://msdn.microsoft.com/en-us/library/hh710041.aspx

  • Error releasing a billing document to accounting - Billing Plan error

    Hello,
    I recently encountered a problem with releasing a billing document to accounting. When I click the release to accounting button in VF02 I would get this message "Billing plan 0000057337 does not exist - Program error".
    Here are my findings thus far, that particular number appears to have been drived from the number RPLNR, which really isnt encoded in other billing docs. Also the problem seems to arise from the calling of the function module BILLING_SCHEDULE_READ where the rplnr from VBRP(i think).
    A similar problem occurs a few months ago and the person who handeled this just advised to cancel the billing doc and re-create a new one.
    However, I was wondering if any of you knows the reason why this problem could have occured so it will not happen again.
    Hope to hear from all of you soon. Take care and good day.

    Hi Ched ,
    You can store a billing plan at item level in the sales document during order processing.All the relevant settings are available under the path given below :
    Under SPRO / S&D/Billing / Billing Plan .
    I had a cursory look , the billing plan is what dictates the invoicing but its not compulsory. It is attached to the Order type & the sales order takes the Billing plan if there is any in the order type. Looks like there was some changes were effected in these settings between the period of the creation of the Sales order & release of the billing document. Have a look....
    Do assign points if you feel this info was useful....
    Cheers
    Kartik

  • How to get the Billing plan number for Contract Item?

    HI Friends
    I have been stuck up with the billing plan number to fetch perticular item in sales contract.
    When I go to the table FPLA, I can all the billing plan numbers for a contract or sales order and I am not able to locate for a perticular line item.
    Is there any way to fetch the exact billing plan number for a line item of a contract?
    Please help me
    Thanks
    Praveen

    U need to use the table vbfa or fololow thw link
    [http://www.erpgenie.com/sap-functional/sd/read-sales-document-flow-using-a-function-module]

  • How to bill the customer as per billing plan according to a contract

    Hello All
    Plz help  me out I am  stuck, scenerio is I am doing a contract with Perodic billing plan for every month. in contract the billing date shows rightly. but when I do vf01 for first month billing it shows all the billing plan days . but when I select first date for billing system allows me to save the bill. but later when I again go for vf01 for next month billing from putting the same contract no it shows a log stating that "paritially processed". Plz show me the path how to bill th customer on every month. is my process is right or any alternative Please suggest. I am waiting eagerly. thankx in advance.

    Hi  Mohan ,
    In the periodic billing plan, you can adjust conditions to the length of
    the period, only if you use the following calculation type for the
    condition:
                 M     quantity - monthly price
                 N     quantity - yearly price
                 Q     quantity - daily price
                 P     quantity - weekly price
    In this case the pricing determins correctly a prorated value
    according to the lenght of the period in the billing plan.
    Please check your conditions and use in a periodic billing plan
    only conditions which have the mentioned calculation type. Otherwise
    you will get every time the same value for a 'long' period or a
    'short' period.
    92655 - Billing plan: billing yearly prices on monthly basis
    Regards
    Goviind
    Edited by: Govindraj Kulkarni on Feb 20, 2012 10:05 AM

  • How to change the currency in Billing plan in SO line item

    Hi Experts
    Pls help in following scenario.
    Company Code Currency: HKD
    Sales Document Currency: INR(Indian Rupees)
    Item Pricing Condition Currency(PR00): 100 USD
    Item Netvalue: 4800INR(System caluculated as per exchange rate type M)
    Document Netvalue: INR 4800
    The sales document item is linked to a billing plan.
    I wanted to maintain 100USD in the billing plan.
    When i goto Sales->item-->Billing Plan, The currency in billing plan screen is document currency and is greyed out.
    How to change the Currency in Billing plan (to Item Condition currency) and maintain the Billing value in USD?
    Pls help.
    Regds
    Hari

    Currency change we wanted to do is not during Invoicing.
    In billing plan itself we want to change the currency setup the billing value in item condition currency.
    Any one, pls help.

  • To track which line item the billing plan date changed.

    Hi All.
    I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
    In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
    Thanks for your help.
    Thanks,
    Neslin.

    Hi,
    There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example,  FPLNR is 10, enter 0000000010.
    Hope it helps.
    Regards,
    Nupur

  • To track the line item to which the billing plan date changed.

    Hi All.
    I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
    In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
    Thanks for your help.
    Thanks,
    Neslin.

    Hi,
    There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example,  FPLNR is 10, enter 0000000010.
    Hope it helps.
    Regards,
    Nupur

  • Referance Billing Plan

    Hi all,
    how to create referance Billing plan in milestone billing ????? as i want to reflect % of down payment automatic for each transaction on vao1????

    Hi,
    Coming to your first question,we are using the reference billing plan that is already there.The reference billing plan here is picked from sales order whaich has billing plan.
    Create a sales order which is using a billing plan.Goto item details,in this go to billing plan tab.
    Select that reference number.note it down.We are maintaining that number here in reference billing plan.
    Coming to your second question,
    You have to maintain that dates in customizing by using the T.Code OVBM or by the path specified below:
    SPRO>Sales and Distribution>Billing>Billing Plan>Maintain date proposals for billing plan types.
    Select your billing plan type.Goto details or click on the blue lens.
    If you want to give you can the reference billing Plan no. and click on Maintaindates.
    If you give that number then those dates will be appeared here and if you want you can change or add some more dates also.
    Here you will find the % bill value,billing type,Billing block etc....
    If you select any item then you can check the date details also by clicking on date details.
    Save.
    Make sure that this billing plan type is assigned to your Sales order type by VOV8 T.Code in billing tab.Or by using the T.Code "OVBP" also you can assign.Or you can assign it your item category also by using "OVBR" T.Code.
    Regards,
    Krishna.

  • Billing Plan - Next Bill Date

    Hello
    I have a requirmenet to generate a charge on a bill for one month only.
    I've configured my item category to use a custom billing plan.  I have most of the information correctly configured except for the Next Bill Date.
    The Next Bill Date is showing 50 (monthly).  Due to this, the sales order is generating a charge for subsequent months.
    I tried to change the Next Bill Date but I see only 1 option i.e. 50.
    How can I change this to that there is no Next Bill Date defined. I'm guessing that the system will stop the generation of charges if it sees that the Next Bill Date is not defined.
    I can't leave it blank because it is a required field.  I'd appreciate your help!
    Thanks

    Thank you so much for your replies.
    One key requirement that I should mention is this:
    In addition to the one-time charge, I also need to display a recurring charge on the same sales order.  If I make the suggested changes, won't the system prevent the recurring charge to appear on subsequent bills?
    This is how my bills need to look:
    1st month:   one-time charge + recurring charge
    2nd month: recurring charge only
    3rd month: recurring charge only
    Please advise.

  • Pro forma invoice problems if billing plan is used

    Hello experts,
    i have a problem again with the billing plan.
    To problem now is the pro- forma for following case:
    A billing plan is used for the items in the sales order. only at the end when the delivery gets prepared at the end, the pro forma invoice will be created.
    The billing relevance for the item category is 'I' - with the billing plan type (a partial billing with % used).
    For the proforma the entire value should appear on the Pro forma finally when the manufactured modul passes the customs.
    I am struggling with the correct copy control settings.
    The already billed values do not appear on the PRO Forma - for the 'real bills' it is ok.While creating the pro forma the related message appears in the log.
    Which settings in copy control for the copy control (sales order --> billing type (pro forma) do I need to use if I need to have the entire sales order item value on the pro forma bill.
    all helpfull answers are highly appreciated.
    Thanks a lot in advance
    Kurt

    Hi Kurt,
    If you are using a billing plan say periodic billing plan; then i dont think you will have a delivery created against it. From the order / contract; it would be a billing document.
    If you are planning to use any of the billing plans; then invoices are bound to split based on invoicing dates and the settings of billing plan.
    If you are planning to pull all the parts for the purpose of customs then probably you can plant to develop a new output type that would print the details from the billing document (instead of Proforma from delivery). This new output type will be used for "N" number of billing documents against a sales order / contract in order to capture all the part numbers in it.  So if you have 3 parts in the order and 6 invoices, then the new output would get triggered 6 times and you will end up with 6 prints.
    Making changes to incorpoate billing plan related copy control settings would turn your development / configuration more complex.
    I hope i understood your question correctly.
    Hope this helps;
    Regards,
    Syed Nasir

  • Periodic billing-Billing plan

    Hello Friends,
    When I create a rental contract for one year with the periodic billing (12 billing plans) and if i see the item level billing plans ,it is perfectly working .
    1. I wanted to reflect the billing plan vlues of the item at header level billing plan also (If i have 2 line items in my contract , then the total value and billing plans should get reflected at haeder level also). At present only billing plans are getting reflected to hader but the Value of the billing plans is not getting reflected to the header. If i see the header level billing plan then i can see only billing plans but billing value field is blank. Please guide me how can do this.
    2. Billing should happen based on the billing value and plans of the header and not as per the item . Please sugest how can i do this? At present billing is generated baed on the item level billing plans.
    Thanks,
    Ashok S.

    Dear Ashok,
    Actually header conditions mostly entered manually in Header level. If you want the condition type to be appeared at the both item and header level. Please go to the particular condition type and select both 'Header Condition' and 'Item Condition' at Changes which can be made Tab. So that the condition type will be appeared at the both the level.
    Regards,
    Rajesh Lingadurai

  • Service Contracts  with billing plan not updating debit memo request in ECC

    For service contracts with billing plan, we cancel the line items and set the user status at header to "cancelled" and also set the cancellation date (under Cancellation Tab) at the header as well as item level which delete all items in the “DMR” in ECC (which are not yet billed). When we do this, it works perfect for most of the time and in some cases DMR items are not updated in ECC and it is billing. When I checked in CRM, the billing plan items are updated based on the cancellation date.
    Experts appreciate your help on this issue.
    Thanks,
    George.

    This is resolved by the note 1008663

Maybe you are looking for