Billing posting error

Hi all
Iam getting this error in billing Vf02 and in vf01 this error doesnot show and also the Exsice invoice is also generated.
I have checked it in pricing procedure and Account determination everything is fine.done the account determination analysis no error is showing but while saving in VF02 the error appares.
Feild name : KTOSL
table name : T030B.
<i>Posting keys for account determination for transaction EXD do not exist
Message no. F5598
Diagnosis
The posting keys necessary for account determination for transaction EXD have not been set.
System Response
Because the posting key is missing, the system cannot generate any automatic postings.
Procedure
Maintain the posting keys necessary for transaction EXD.</i>
Kindly help me solving this error.
regards
sathish.

hi,
it looks like EXD posting key is missing perhaps for your pricing conditions. EXD -its excise duty... pl check if the necessary conditions for excise are assinged with this account key in pric. proc and then look at VKOA- acc. determination for this account if assined to a GL account.
Hope it helps.
Thanks,
Sadhu Kishore

Similar Messages

Change GL account number during SD billing posting

Hi all,
scenario :-> debit : Customer
                  credit : sample sales
I need to change the GL account posting from sample sales to income ageing during SD Billing posting.
Is there any suitable user exits or BAdI for this case?
I need it urgently, thanks !!
Will award high point for helpful solution given.

Hi Gupta,
I use user exit SDVFX004, and code as this,
data : p_matkl type matkl.
check if the material group = 'FG0500'.
select single matkl into p_matkl
                      from mara
                      where matnr = xaccit-matnr.
if p_matkl = 'FG0500'.
     xaccit-hkont = '31013020'.    "post to Ageing income account.
endif.
but when i do invoice, the invoice generated without accounting document, the error for posting status is ' Error in Accounting Interface.'
What have i left out ? Any solution to solve this?
Really appreciate if can help.
Will reward high point for it , thanks!!!

Credit memo on billing posted to accounting

Hi...
If I wanted created a credit memo on billing that already posted to accounting, do I need to cancel the billing first? This billing posted to acct on the previous closed fiscal year.
Tq
Henery

Hi Henery
It is not required to cancel the Biling document even if it is done in the previous period.
But, you have to see whether your organisation follows Release procedure(approval step) or not.
If your organisation does not follow release procedure then you can create the Credit memo directly refering the Billing document.
But if your organisation follows Release procedure then, first you have to create a Credit memo request (Credit memo request can be created with ref to Sales order, Billing doc or even without ant ref).
From this Credit memo request you can create a Credit memo.

How to catch Posting error in File to IDoc Scenario?

I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj Kumar

Hi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh

Billing posting for intercompany delivery process

Hi all
we configured a new process for intercompany billing to use a standard PO for delivery between a warehouse and a store both in different co codes. Process is based on vendor and customer defined in retail sites both WH and store. Eg. WH site code D002 with assigned vendor D002 and customer D002. Similar for receiving store RA01, vendor and customer RA01.
Financial entries for delivery and billing posting are done between thses AP/AR accounts. As we have several warehouses and lots of stores will become difficult for finance to reconcile it.
Request is to have one generic customer assigned to all warehouses and one generic vendor assigned to all stores, this reducing (in FI view only).
my questions:
1. is any way to configure in FI or Billing for a several customers with different codes FI entry to be posted to one AR account only in issuing company and similar for several vendor accounts during MIRO FI entry to be posted in one AP acount only?
2. On standard intecompany delivery, since we use only one document in both companies (PO) what is the way to do a reconciliation betwen PO issued and booked at receiving site. Like transaction codes eyc.
Thank you in advance for help
Silviu J

Hi,
My suggestion would be to go with the DIP Profile with the material determination.
In your case it would be the travel expenses.
Create a WBS elemenent where these services are being used and make it as billing element.
Assign a sales order with this this material and assign this DIP Profile in Sales Tab-B.
DP81, ODP1 are the Tcodes you can look for..
Reward points if found useful.
Thanks..

GR/IR Posting Error CKMLGRIR025 - Purchase Order History Inconsistent

Hi Everyone.
We currently have a posting in our GRIR for a Feright Condition Value against a Purchase Order which gets the above error when trying to post in MR11.
The Diagnosis of the error reads:
"The purchase order history contains differences between the goods receipt and invoice receipts/Account maintenance for the order item in the field Difference Quantitiy (= 43.804 TO) and Difference Value (= -342.77)
The purchase order history for this tiem is inconsistent"
When looking at this Freight Condition information in the Purchase Order I can not see why this item has resulted in this error in MR11.
Has anyone else seen this error come through in their system, and do you have any ideas on how to fix this.
Thanks
Hayley

We are experiencing the same issue with the GRIR Posting Error CKMLGRIR025 - puchase order history inconsistent. The actual message that we receive is Puchase Order history already inconsistent -->Quantity 1.00 EA Value 0.65-USD.
We reviewed SAP Note 708649 which also recommends using transaction MIRO with the corresponding default quantity and value o. However, we are not able to enter an Invoice for the "default qty & value 0", as SAP gives me error message M8278 "You are not allowed to have zero lines" (just like Haley commented). In reviewing this thread, I did not find the solution to the error message M8278 "You are not allowed to have zero lines" . Could someone help me understand?
Thank you!

Fi posting error

Hi SAP gurus,
                    I am facing posting error fi_tax_chk_pricing_data
                   error code 13 builder tax2.
                 plz help me

hi
u get this error when u have not specified the county while creating the company code go to OX02 and give country for the company code. this solves your problem
rgds
sree

MR11 GR/IR Posting Error - PO History Inconsistent - error message M8278

Dear experts,
We have the problem as described in SAP note 708649. Error CKMLGRIR025 - Purchase Order History Inconsistent
This has also been described in this thread
Re: GR/IR Posting Error CKMLGRIR025 - Purchase Order History Inconsistent
We also have the issue on posting an invoice "default qty & value 0" in MIRO, receiving error M8278 "You are not allowed to have zero lines".
However, so far we are not able to correct this eg do not know how to continue to clear the GR/IR
Any help or hints on this matter would be appreciated

Hi,
please note that the error message M8 278 is only issued if there is
zero amount in ALL document lines.
This means that you can post MM-documents with zero lines. But only if
there are other lines with amount > 0. The reason for this system
behaviour is, that every time a MM-Invoice is posted, an FI-Document is
created. In FI-Documents it isn't allowed to have zero lines.
So if you have an MM-Document with only zero lines, the Fi-document
can't be created and the error message is issued.
I hope I could help you further
Best regards
Erika

PO posting error

guys,
i get this posting error when i try to create a purchase order.... please some one help on this??
tnx
wiz
Posting only possible in periods 2009/09 and 2009/08 in company code 2000
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022

Hi,
The problem was due to posting period is not open for posting yet.
I believe you are trying to create PO for Oct 2009. But your posting period was open for Sept 2009 and Aug 2009.
Go to tcode MMRV to check for company code 2000, current period 09 2009, previous period 08 2009.
Go to tcode MMPV, enter the company code 2000, period 10 and fiscal year 2009, select "Check and close period" and execute.
Go to tcode MMRV to check again for company code 2000, current period should be 10 2009, previous period 09 2009.
You should be able to create a PO by now. If you still fail to do so, please contact your FI to open FI period via tcode OB52.
Hope it helps.
Regards,
JT

General Ledger Posting Error (GLT2 051) No accounting transaction variant

Hello SAP Gurus-
When testing lockbox in FLB2, I received the following error message:
General Ledger Posting Error (GLT2 051) No accounting transaction variant assigned to FB01/ /LB
We are on ECC 6.0
I created a new Document Type LB
I created a new G/L account for Lockbox clearing and AR
How do I fix this?
Thank you!

Hi,
Assign a transaction variant for the document type you created in Transaction code GSP_VZ3. Also, make sure that the GL accounts affected are assigned with item categories in GSP_LZ2.
Thanks
Aravind

POST errors need help

Can any one tell me what the POST error of 2 beeps pause 1 beep is realted to? The system begins to boot flashes video, video shuts off, cmos info flashes shuts off and give post error.

Use just one stick of RAM in a green slot. Reset the Bios and be sure the machine is not pluged in when you do those things.
Remove all unneeded hardware so that you don't have stuff in the box when you try to boot that is not needed to post.
Find out which Bios you have when the screen first comes up.
You need to know which CPU core you have. If it is a Clwhammer, Newcastle or Winchester then you need Bios version 3.3 If it is a San Diego, Venice or X2 then you need Bios version 9.1.
Now that you have a system with the correct Bios you can then install your RAM in slots 2 and 4. You should then get a post into dual channel mode.
Set in Bios first - Optimized Defaults. Make sure that you do not skip this step.
Now setup the Bios to match the gear in the box. No overclockinmg as yet.
Now get Windows cleanly installed with any drivers you may need.
Now you are ready to install those other items you have in your hot little hands. One at a time.

(C1) Initialize POST Error Manager (PEM)

Hello,
My hardware diagnostic card gives the following error: (C1) Initialize POST Error Manager (PEM). My bios just starts well and gives no error messages.
I can go to the bios as usually and my computer works normally (at the moment), but QuickTech also gives some error messages:
- BIOS Buffer overrun check
- SMBus Host detection
Maybe that these errors also have to do with it?
When I try to search with Google I only get some manuals where these error codes are listed, but no more explanations and possible solutions.
Can somebody please tell me what this problem is all about and how to fix it?
I have a MSI 6533 bord.

Hi,
No, unfortunately not. I posted this question in a lot of different forums, but no one seems to know what's exactly wrong and how to fix it.
I keep searching, and when I find some answers / solutions, I'll post it here. Can you also please keep me informed if you know some more?

Fi posting error due to fiscal period error 1

HI SAP GURUS,
I am trying to post TR6 Challan in todays date & getting following message-
Fi posting error due to fiscal period error 1
Message no. 8I216
Diagnosis
Attempt to post the document in a period outside the current Fiscal
period setup.
Procedure
Change the posting date or Change the fiscal period prior to posting
the transaction under consideration.
please help me to resolve the issue.
CHEERS

HI
This error is due to Posting period is not open in FI check the posting period is opened for all the accounts in OB52 then post the entries
hope it will be usefull

Billing Processing Error

Has anyone lese been a victim of the recent Billing "processing error", and if so how were you able to get the situation rectified? My online payment was deducted from my bank account on two separate dates for the same amount - I have gotten different versions of when the money will redeposit into my account, and have yet to see it returned (even though as of my last conversation I was told it would be in my account by the end of business today).

I moved to a new apt last month. Oct during which month I received a bill for $86 due early November. I paid $86 immediately upon receipt. However' when I call to inquire what I owe the computer states on the phone : ZERO. When I log on to the Net I am told I have a bill for $60 due now or at least by 11/25. This ALARMS me. I do my best to pay a bill as agreed for service. Then I have the computer telephone stating I have NO Balance Due in November YET THE INTERNET computer shows my BILL as owing $60 for this month due soon or at least by 11/25/08. I'm concerned. HELP

MSI X79-GD65(8D) gives a posting error 63 Late CPU Initialize

Hey Guys.
I have recently purchased new hardware.
MSI X79-GD65(8D) Motherboard
Intel i7 3820 CPU
4 X Corsair Vengeance 4GB DDR3-1600 RAM
MSI GTX660Ti Power edition GPU
Corsair 750W Professional series PSU
Corsair H80 CPU Cooler
I haven't overclocked ht e mobo, but on cold boot, the mobo doesn't initialize, gives a post error 63, refered to the mobo manual, it says it means late CPU initialize. Checked the BIOS, running version 1.7 and according to MSI download site for the CPU support list.
The memory is in quad channel as it shows in a diagram in the mobo manual. If I switch the pc off, and back on, it initializes and boots, the pc runs stable, it can run 48 hours no hassle, passes burn in tests to, just the first cold boot doesn't initialize.
Any ideas for what to look at would be great.
Thank you.

A little hint for you: Don't try any of the .1B betas as they run horrible. I had to remove the latest .1B3 as it bricked the board and had to be recovered.
1.18 B7 is still the best bios to use:
Quote from: flobelix on 17-November-12, 00:49:07
I'd suggest the later Bios 1.18 B7 which I'm also using with the i7-3820 (https://forum-en.msi.com/index.php?topic=154186.msg1192427#msg1192427)

Billing posting error

Similar Messages

Maybe you are looking for