Bin Location In Pick List - Cannot select batch/serial number after pick list created

Hi,
When i set up the item master as "Issued Primarily By Bin Location". There are no way for me to assign batch/serial in back end. In contrary, when item set up as "Issue Primarly By Batch/Serial Number", SAP prompt to pre-select the batch/serial no. during creating pick list.

Hi,
Please check this thread for the reason why system information is not correct.
Variables - Sap business one
Thanks & Regards,
Nagarajan

Similar Messages

  • I cannot find my serial number after a disk clean what do I do NOW ?

    I cannot find my serial number after a disk clean what do I do NOW ?

    what do I do NOW ?
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    In the future, you need to get smarter about how you store your serial numbers; they must be backed up onto a different disk, just like your photos; or you may use some other storage method like paper and pencil. Just like photos, you need at least 2 copies in different locations.

  • How to get the right Serial Number during Pick Release

    Please we need your help to get the right serial number => Auto-Allocate on YES, Pick Confirm with NO.
        A problem is occurring during the Pick Release process.  Custom code has been added to the hook INV_DETAIL_SERIAL_PUB to provide the Pick Release process with the serial number to pick for the item being pick released.  The hook works and the Pick Release process picks the correct (specified) serial number.  However, at some point later in the Pick Release process the lot number is chosen and the process seems to pick the first lot number it finds available for the item – it does not take into account the serial number provided by the hook.  This causes the Pick Release process to fail when the lot number chosen is not the lot number linked to the serial number.  Has anyone else encountered this same issue?
        An example:
    Item ABC123
    Serial SER001 – Lot LOT001
    Serial SER002 – Lot LOT002
    Serial SER003 – Lot LOT003
    Item ABC123 is being pick released.
    The customised hook provides the Pick Release process with serial SER002.
    The Pick Release process correctly uses SER002, but chooses lot LOT001.
    thanks!
    Francisco

    Hi,
    I guess you have added the code at slightly different place.
    Pick Release Process will always allocate lots based on Inventory Picking Rule (or WMS Pick Strategy if you are using WMS).
    So if you want to override that you much first delete the MTLT record (inv_trx_util_pub.delete_lot_ser_trx), then insert MTLT with your Lot number (inv_trx_util_pub.insert_lot_trx)..then insert MSNT (inv_trx_util_pub.insert_ser_trx) with your serial number.
    Ensure that transaction_temp_id on MSNT should match with SERIAL_TRANSACTION_TEMP_ID on MTLT table.
    Thanks,
    Hrishi

  • Cannot activate with my serial number after Harddisk crash

    My harddisk crashed, I installed my dreamweaver MX2004 from my orginal disk.
    I entered my serial No. - but activation didn't work.
    I tried to activate by phone - not successfull, phone no. doesn't exist.
    Is there a german telephone number for activating this product?
    Thanks for urgent help - and sorry for my bad english
    Anga

    THANK YOU!!!!! Seems to work J
    Best regards
    Annette Gallas
    Von: Dave Merchant [email protected]
    Gesendet: Samstag, 20. Juli 2013 15:39
    An: webhexe
    Betreff: Cannot activate with my serial number after Harddisk crash
    Re: Cannot activate with my serial number after Harddisk crash
    created by Dave Merchant <http://forums.adobe.com/people/Dave+Merchant>  in Dreamweaver CC - View the full discussion <http://forums.adobe.com/message/5522897#5522897

  • DI-Error: You cannot select batch or serial numbers for a closed row

    Hello Experts,
    I have several B1-Systems connected to R/3-Systems via B1iSN.
    In B1 for example I have 2 rows in Purchase Order. One row was closed by a goods receipt - 1 row is still open.
    From our R/3-System we send Order-Acknowledgements to B1. Because line 1 is already closed we want to ignore row 1 and update only information in row 2. By using KeyExpansion I could solve that requirement (check in B1-System if row is already closed -> insert row in IDoc only with LineNum). For example:
    <Document_Lines>
      *<row>* <!-- ignore -->
        *<LineNum>0</LineNum>*
      *</row>*
       <row> <!-- update -->
        <LineNum>1</LineNum>
        <ItemCode>ABCDEFGHIJK</ItemCode>
      </row>
    </Document_Lines>
    Unfortunately DI-API does not allow to update each row separated. I always have to send all rows in IDoc even if one row is closed.
    For one B1-Company batchnumbers on every transaction is required. When creating Goods Receipt we have to define a batchnumber for item. But now if I want to update a open row (as described above) I get an B1iSN-Error:
    DI Error: (-10) You cannot select batch or serial numbers for a closed row
    Any ideas to solve that Error? Thanks.
    Regards,
    GB

    Hi Bastian,
    I have still one open question. How to tread Document Lines Additional Expenses?
    If I use the logic of visual order I still get the error "You cannot select batch or serial numbers for a closed row".
    Example:
    <Document_LinesAdditionalExpenses> 
    -      <row>
               <LineNumber>4</LineNumber>*no expenses*
    </row>
    -      <row>
               <LineNumber>0</LineNumber>*no expenses*
    </row>
    -     <row>
               <LineNumber>1</LineNumber>*no expenses*
    </row>
    -     <row>
               <LineNumber>2</LineNumber>*no expenses*
    </row>
    -     <row>
               <LineNumber>3</LineNumber>*expenses correct*
               <ExpenseCode>3</ExpenseCode>
               <LineTotal>10.00</LineTotal>
    </row>
    </Document_LinesAdditionalExpenses> 
    How can I solve that?
    Thanks and regards,
    GB

  • I cannot select my phone number in my appleID for imessages!

    i cannot select my phone number in my appleID for imessages, and i dont know why! its there but will only let me pick my email address.   and when i try and change the phone numbers in my appleID settings, it says i have invalid phone number, when i KNOW it is valid.
    please help!!

    Hi Tia8,
    If you are having issues with iMessage and your phone number, you may find the following article helpful:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    - Brenden

  • I cannot select radial filter points after I create them in Lightroom.  Anyone experience this issue before and what might be the solution?

    I cannot select radial filter points after I create them in Lightroom.  Anyone experience this issue before and what might be the solution?

    Press H to hide/show control points.

  • Cannot select serial number after patch upgrade to PL 27

    Hi,
    We have just upgraded to PL 27. As all the items are managed by serial number, we find that we are unable to select certain serial number when we are performing deliveries, return or invoicing. The funny thing is not all the serial number are affected. For example, out of 10 available serial number, 2 can be selected and the rest cannot.
    Any idea what causes it?
    Regards,
    TWP

    Hi,
    We are also facing the same issue when we try to upgrade the patch level to PL27 for one of our client. After few days of testing we found out that it seem to be a major bug in PL27 where by you will not be able to select most of the serial number after you sort the serial number table. You might need to try with different user or create another user which haven't apply the sorting as a temporary workaround method because we have try to remove the sorting but it cant be done. Thus, we create/try with different user without applying the sorting and it worked. To fix the issue permanently, you will need to revert the issue to SAP.
    Regards,
    cakong

  • Serial Number in Pick and Pack

    Is there a way to enter the Serial Number during the Pick and Pack process? Can you have the Serial Number in placed before the Delivery is done?
    Please advise. Thank you.

    Thanks, Nagesh. That confirmed my suspicion.
    This is the business scenario.
    The operations and the warehouse are in different locations. For items with serial numbers, the operations call up the store to get the serial number before they can issue the Delivery Order. The turn around time can be long.
    If the warehouse people can enter the Serial Number during Picking, then the Operations can just convert them into Delivery Order.
    Alas, this cannot be done in SBO.

  • Batch/Serial Number for received items

    Hi Friends,
    I Received a item(0001) 10 quantity with the Management Method is NONE
    After This process
    I want to Sell this Product(0001) as Serial Number/Batch Number wise
    One of our Friend told me that we can do this in
    "ItemManagement"
    In Batch Management selection window I choosed
    Operation -COMPLETE
    In Item Code My Item (0001) is not appearing
    and i tried to change the item(0001) MANAGEMENT METHOD
    a Error is coming
    That is"u cant change the management method until on hand quantity is zero"
    now wat i have to do to make Batch\serial number for received items
    kindly reply me i  m waiting for ur reply
    D.Sankar

    Hi Sankar,
    In the Item Master Data - General tab, if an item is managed by 'Batches' and its 'Management Method' is 'On Release Only' then that item can be received into stock without creating Batches for that item. However, the item cannot be released from stock e.g. in a Delivery document without selecting batch numbers.
    Lets assume that your item '0001' is 'Managed By' Batches and has a management method of 'On Release Only' in the Item Master Data - General Tab. In this case lets say that a Goods Receipt PO is added with a quanauty of 10 for this item and it adds to the database without creating batch numbers for the it. However, the batch numbers, for this quantity of  10 received in the Goods Receipt PO, must be created before they are released from stock, in a Delivery for example. To create these batch numbers  the Batch Management must be run with the 'Operation' 'Complete'. This is the only way to create the Batch numbers in this scenario. 
    I hope this helps clarify the 'Complete' operation in the Batch Management.
    Regards,
    Noreen

  • I am trying to reinstall Logic Studio 7 and I cannot find the serial number. It's suppose to be in one of the installation booklets. I'm not sure which one. Could you help me?

    I am trying to reinstall Logic Studio that i bought back in 2008, and I cannot find the serial number. I think I barely remember running into this problem before with this application. When i use the installation disc it tells me that the serial number is located in one of the installation booklets, and it doesn't explain to me which one. Can you help me?
    Thank You!
    Steven harris!
    <Email Edited by Host>

    Hello Steven,
    Check out this article:
    Logic Studio: Locating the Support ID and Serial Number
    http://support.apple.com/kb/HT3416
    You can find the Logic Studio Support ID on the front of the Installing Your Software booklet included in the software box.
    The front of the Logic Studio Installing Your Software booklet:
    All the very best,
    Sterling

  • I have purchased Adobe Acrobat XI Pro.  I have a serial number (removed by host)  I purchased this product after the free test period had expired.  Now I cannot enter the serial number into the website because it says that the product is not

    I have purchased Adobe Acrobat XI Pro. I purchased it after the free test period had expired.  In the drop down menue on the website XI Pro is not listed so I cannot enter the serial number [removed by host].  So I cannot use the program.  John Steele.  [personal information removed by host]  Thank you

    @Bill, I removed your post, since its subject now contained the serial number which I could not remove.
    Bill’s original reply: I cannot edit your post. Please remove the S/N ASAP. You should never post S/Ns.
    I will add to Bill’s reply and add that you should not post your phone numbers or other personal information on the internet.

  • I bought photoshop elements 13 at Costco for my Mac i cannot find the serial number anywhere on the box

    i bought photoshop elements 13 at Costco for my Mac i cannot find the serial number anywhere on the box

    You do not find a serial number ON the box where anyone may see the number
    Photoshop Elements is not part of the Cloud, I will move this to that forum
    Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Find serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
    -http://helpx.adobe.com/contact.html?product=photoshop-elements or
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • Price List erro - variation between the number of price lists

    The following error is occuring when adding a price list. 
    Price List error - variation between the number of price lists and number of price lists items.
    We have reviewed with recommendations from the below post, but are UNABLE to run the 2nd proposed query.
    Message 3506-9 Price List Error - Please Help
    This query is not able to be executed - can you please supply another query,
    SELECT T1.ItemCode as 'OITM', T0.ItemCode as 'ITM1' FROM ITM1 T0 Left JOIN OITM T1 ON T0.ItemCode = T1.ItemCode Where T1.ItemCode is NULL 3
    Thanks in advance for you assistance

    Hi,
    Remove the '3' from the end, then the query will run properly:
    SELECT T1.ItemCode as 'OITM', T0.ItemCode as 'ITM1' FROM ITM1 T0 Left JOIN OITM T1 ON
    T0.ItemCode = T1.ItemCode Where T1.ItemCode is NULL
    Regards,
    Nat

  • HT4061 i lost my Pad Please how can i track it ,I cannot remmeber the serial number.

    i lost my Pad Please how can i track it ,I cannot remmeber the serial number. Please help me find it

    Unless you enabled Find My iPad on it before it was lost then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
    If you think that it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
    There are some methods described on this page for how you might be able to find the serial number :
    http://support.apple.com/kb/HT4061
    Or you could try your support profile : https://supportprofile.apple.com/MySupportProfile.do

Maybe you are looking for

  • Mini-DV/DVD/Gigabytes

    Hello. I have a couple of questions I was hoping someone could answer. 1. How many gigabytes are necessary on my harddrive in order to import one hour of mini-DV tape? 2. Is there a best DVD format to use? 3. Do DVDs come in different capacities? 4.

  • TV picture upside down

    Model # 55SL417U  It worked fine for about a month and then periodocally the screen would filp upside down.  It would stay like that for a couple of hours and then flip back to normal.  This past year it's been in storage and now it's almost always u

  • ITunes 8.0.1 available

    Downloading at the moment.

  • CCTV Camera input to iMac?

    Hi guys, We are looking at using 2 wired dome cameras and our iMac as a CCTV system using Security Spy but we're struggling to find a way of getting the video signals into the iMac. With a Mac Pro it would be easy with an internal card but obviously

  • Extreme lag in CS5

    I'm experiencing extreme lag while using photoshop lately. I'm running CS5 on a Mac OS X 10.5.8. My computer is about three years old but the hard drive was replaced about 6 months ago. Basically what happens is that the program runs incredibly slow