Binary fork created with FMLE 3.2 and not in notepad?

Creating an XML via notepad does not load in FMLE 3.5 "invalid xml" however works fine from the FMLE cmd line. I beleive its because it doesnt create the binary fork as 3.2 does when you create the XML from it. Does anyone know how to make it so my notepad created XML will read as a valid file in FMLE 3.2?? Thank Terry @ LiveU

Idem
same problem! really **** adobe + apple, their war of law and money!
I go home windows, adobe and apple and goodbye! not really serious with their client

Similar Messages

VF11 wrongly created with RV Doc type and with not clear status.

Hi All
Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing types) and it is in not clear status.
2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
Order Type : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
Order type: ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.
      FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
I reviewed similar issues with SAP Note and with below explanation:
          "There are 2 procedures that are possible when Vf11 is posted.
          Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
          New Procedure - A Real FI reversal was carried out with clearing."
In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
     Appreciate your answers or suggestions.
Thanks in advance,
Sunil
Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

Thank you Ivano.
I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
Thread is closed.
Sunil

What is the Difference with FMLE 3.1 and 3.2? having problems with my stream

What is the difference with FMLE 3.1 and 3.2?
I am having major problems with my live stream, i am currently using FMLE 3.1 and using a Imac computer.
The stream seems to be delayed by 20mins and keeps on crashing
I have a 2MB upload speed and frame rate 25.00 and bit rate 800 kbps fromat VP6
Can anyone help me with getting the settings right and what is the best computer to use to allow FMLE not to crash and stream to run smooth?
Please Help
Thank you

Hello!
I would be interested in helping you with your question. You are going to need to provide a little more information about your current configuration in order for me to better understand your issue. Until then, I'll do my best to answer your quesitons.
There are subtle changes from 3.1 to 3.2. Both are stable releases. With your setup, you should be using 3.2.
Issues with FMLE typically deal with your capture card. The issues you are having sound like a streaming server issue. Stream delayed 20min? This isn't typical behavior. What streaming media server are you usign? FMS or Wowza? Define 'crashing'. Anything in the output log in FMLE or is your server 'crashing'.
Thank you,
Stephen Apple
Independent Broadcast

Would like to re-create the webpages created with iWeb to iCloud and post

Would like to re-create the webpages created with iWeb to iCloud and post to the internet

Unfortunately, iCloud does not support the hosting of webpages. You will need to find a 3rd party web host in order to publish your web sites.
Depending on the version of iWeb you are using you have a couple of publishing options:
iWeb '09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like "www.YourDomain.com/sitename/Home.html )
iWeb '08 you can publish your website to a local folder. Then upload to your host with an FTP application like CyberDuck
I have been using IX Webhosting for several years with little to no problems "usually the problem was something I did" and they have been quick to solve any issue I have come across. The have plans that start at $3.95 a mo (USD) and their customer service is top notch.
http://jeffnitschke.com/IXWebHosting.html
http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
"I may receive some form of compensation from my recommendation or link."

IDOC is created with status 51( application document not posted)

Hi experts
iam working on File-IDOC scenario, when i test the process the XML message is created with no errors and
but the IDOC is created with status 51( application document not posted)
the details error shows:
An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
during a synchronous update.
The error was caused by the transaction VA01.
previously i used same test data that time it was working fine,
please tell me how can i fix the issue.
regards
vasavi

Key in your Idoc number in BD87, execute
select the error message and then follow the menu path :
EDIT --> restrict and process (Select)
In the next screen UNCHECK the Bkgd Processing and execute
Now EDIT --> Process --> foreground from error or in foreground mode.
This will lead you the screen where it errored out.
Thx
PSR

I would like to be reached at my iMessage with my mobile number and not my email address

I would like to be reached at my iMessage with my mobile number and not my email address

If you're finding that iMessage & Facetime is showing your email as default & your number is greyed out so can't select it then try signing out of iMessage & Facetime & signing in again.

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

tammersalem wrote:) <-HDMI-> (HDTV)
My main concerns are:
-If I use iTunes on my main computer, will it then be available to Apple TV?
-If I use Apple TV to download will it be available to my Main computer?
-Can the Apple TV use a media server for storage over LAN (using NTFS Samab or otherwise)?
Basically iTunes feeds AppleTv with media either syncing (copying to it) or streaming live.
Media must be compatible with AppleTV.
AppleTV requires a proper iTunes instance running - it cannot access a NAS directly.
If you store media in a folder on a NAS and it's part of the computer iTunes library (just stored on the NAS vs internal/external drive), then when running iTunes makes this content available to AppleTV.
Data will travel:
NAS > network > iTunes > network to AppleTV
As the path is potentially slower than internal/external attached drive > iTunes > network > AppleTV, it may or may not work robustly for streaming.
If AppleTv is set to sync (it can also stream in this mode), when you purchase direct on AppleTV, the media should sync back to where the itunes library is stored (via iTunes) to keep things in sync and to allow you to backup the media.
You cannot drag/drop media to/from AppleTv across the network, nor can it directly access storage itself - iTunes is an essential cog in the wheel.
The majority of commercial 'in-built iTunes media servers' will not work directly with AppleTV as it has to be 'paired' with iTunes by entering a numerical code in iTunes and does not simply see 'shared libraries'.

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

Hi rixa03!
I have a couple of troubleshooting steps for you to try to resolve this issue. First, you should try closing the app according to the instructions found on this website, which is a troubleshooting assistant for the iPad:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/#section_3
If the issue persists, you may need to try resetting the iPad, the instructions for which can be found here:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store

I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?

I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?

The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 or 10.8 is part of the 10.6.6 update.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

I just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

i just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

Copy everything from your backup copy of your old computer to your new one.
Then sync.

TS4006 My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the

My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the old? Any help would be greatly appreciated. It's been a week without a phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

MM INVOICE created with different Payment Terms and 2 differents PO.

I will explain with an example to understand better the issue and why this could happen, (for the same Co.Code):
On 05.09.2011, 5203795529 was posted with payment terms D030.
At that time, PO #: 4501105395 was having payment terms D030 while PO #: 4501232207 was having payment term D031.
Invoice 5203795529 was posted successfully.
On 12.09.2011, 5203806574 was posted with payment terms D030.
At that time, PO #: 4501105395 was having payment terms D030 while PO #: 4501232207 was having payment term D031.
Invoice 5203795529 was posted successfully.
In OCT, user receives another invoice for this 2 POs (4501232207 & 4501105395) and trying to post MIRO again but this time, user encountered error 'Payment terms in purchase order 4501232207 differ from current terms'. In order to proceed, user has changed payment term for 4501105395 from D030 to D031 on 17.10.2011 and proceed with invoice posting without error. 5203878342 was posted on 17.10.2011.
The vendor always has the same Payment Term: D031
Now the question is, why user is able to post without any problem previously even though there's different payment terms on both POs and not now anymore?.
Thanks

Thanks Jayavar,
Nobody has changed anything, (I mean the PO Payment terms), until October in PO. 4501105395
The error message is when the user try to post with MIRO PO´s (4501232207 & 4501105395):
"Terms of payment in purchase order 4501232207 (always with Payment term D031), differ from current terms"
Message no. M8349
Diagnosis:
The terms of payment in the current invoice differ from those in the current purchase order 4501232207, other terms of payment were stipulated:
Terms of payment key D031
1st cash discount period 31 days 0,000%
Either you have selected more purchase orders with different terms of payment, or you have changed the terms of payment manually.
But the strange thing is in SEP, there's already this difference & there is no problem posting the invoice & the problem only comes when in OCT.
Thanks and Rgs
Francisco

Package created with Creative Cloud Packager and volume licensing key- sign in required

Hello, we have used Creative Cloud Packager and volume licensing key to create Adobe Photoshop CC v.6 and other apps packages, tested before deployment. Deployed the image on iMAC computers, users are getting Sign in Required/ registration details message. Tried to use AAMEE to create serialization file, but it does not recogise packages created by Creative Cloud Packager. appreciate any advice. thank you.
Svetlana

HI Abhijit,
All our students have network home folders, the issue is that some students can open Photoshop and it will be activated, other students will be prompted to activate PHotoshop when they try to open it. We have tried to delete photoshop plist and adobe photoshop settings folder from students Library/ Preferences folder but it did not help.
We'll test the APTEE utility tomorrow, I will post the results. Thank you.
Svetlana

Binary fork created with FMLE 3.2 and not in notepad?

Similar Messages

Maybe you are looking for