BIWS with Breaks and Sub-Total

Hi All,
Created a simple report with Breaks and sub-total and then i exported that report block as BIWS. When I test it in the BIWS Manager, I can able to see the break data with sub-totals. But when i try to connect the same BIWS with Dashboard, am getting only the detail rows and am not getting the sub-total rows.
Please suggest how to go over this issue.Thanks for your time and support.

You have any idea now ‘nbLines’ works? If its returning total row count, then i think we can try some options with it. Basically am trying to get data like below to apply combo box selectors on Year and Country.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2013
Total
400
2014
India
100
2014
US
200
2014
UK
100
2014
Total
400
Total
Total
800
But am getting it as below, if i apply combox box on Year and Countyr, am getting blank value in between list of values.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2014
India
100
2014
US
200
2014
UK
100
2013
Total
400
2014
Total
400
Total
Total
800
Thanks

Similar Messages

Hi! Everyone, I have some problems with JOIN and Sub-query; Could you help me, Please?

Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!

Hi,
fac30d8e-74d3-42aa-b643-e30a3780e00f wrote:
Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!
As the others have said, the execution plan will give you a better idea about which is faster.
If you're trying to see how using (or not using) a sub-query affects performance, make the rest of the queries as similar as possible. For example, include field3 in both queries, or ignore field3 in both queries.
In this particular case, I guess the optimizer would do the same thing either way, but that's just a guess. I can't see your execution plans.
In general, simpler code is faster, and better in other ways, too. In this case
tableB
is simpler than
(SELECT field1, field2 FROM tableB)
Why do you want a sub-query in this example?

This is regarding totals and sub totals in sap-scripts

Hi to all...............
1...How to print totals and subtotals in sap-scripts? where we have to code the logic.what sort of logic is needed to print the same?
regards,
swaminath.

Hi
HI,
To calculate totals and sub totals in sap scripts you have to use subroutines.
Say if you have to add the unit price (KOMVD-KBERT) then in the main window whereever tat value is picked write this routine
/: DEFINE &TOT_PRICE&
/: PERFORM F_GET_PRICE IN PROGRAM <subroutine prog name> /:USING &KOMVD-KBERT& /:CHANGING &TOT_PRICE& /:ENDPERFORM
Then write the variable where ever you want it to be printed (mostly it will be in footer window)
Then create subroutine pool program and you have to write the code.
FORM F_GET_PRICE tables int_cond structure itcsy
outt_cond structure itcsy. data : value type kbert.
statics value1 type kbert.
Read int_cond table index 1.
value = int_cond-value.
value1 = value1 + value.
Read outt_cond table index 1.
outt_cond-value = value1.
Modify outt_cond index 1.
ENDFORM.
To know more, have a look at this thread ..
Re: SAP Script: Display Total calculated on page 2 in page 1
Reward if usefull

Totals and Sub-Totals in ALV GRID

Could anyone advice, how to display sub-totals and totals in ALV Grid(using FM).
Ex: value1 value2
 100 50
 200 50
 subtotal 300 100
 total 400
Thanks in advance...

Refer below demo code and see perform Sort_list..
it wil serve ur purpose.
REPORT ZGILL_ALV message-id rp .
type-pools slis.
tables: zgill_main,zgill_details.
data z_fieldcat type slis_t_fieldcat_alv.
data begin of itab occurs 0.
DATA ICON TYPE ICON-ID.
 include structure zgill_main.
data salary like zgill_details-salary.
data end of itab.
*data itab1 like table of itab with header line.
data : WA_SORT TYPE SLIS_SORTINFO_ALV,
 IT_SORT TYPE SLIS_T_SORTINFO_ALV,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
 IT_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
 WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
PARAMETERS: p_list radiobutton group A1,
 P_GRID RADIOBUTTON GROUP A1.
SELECT-OPTIONS: S_PERNR FOR ZGILL_MAIN-PERNR.
start-of-selection.
perform fill_itab.
perform sort_list.
**************Start of scenario without container******************************************
*********Method 1***********
perform fill_fieldcat. " Manuallly Preparing Fiedl Catalog
*********Method 2***********
*perform fill_fieldcat1 changing z_fieldcat. "Preparing field catalog with merge function
perform display_alv.
*****************end of scenario without container*****************************************
*& Form fill_itab
 text
--> p1 text
<-- p2 text
form fill_itab .
*select * from zgill_main up to 20 rows INTO CORRESPONDING FIELDS OF TABLE itab.
*ITAB1[] = ITAB[].
select apernr aname aorg adob b~salary INTO CORRESPONDING FIELDS OF TABLE itab
 from zgill_main as a join zgill_details as b on apernr = bpernr
 WHERE A~PERNR IN S_PERNR.
LOOP AT ITAB.
IF ITAB-PERNR < 1111.
ITAB-ICON = '@08@'.
ELSEIF ITAB-PERNR > 1111 AND ITAB-PERNR < 11111111.
ITAB-ICON = '@09@'.
ELSEIF ITAB-PERNR GE 11111111.
ITAB-ICON = '@0A@'.
ENDIF.
MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
endform. " fill_itab
*& Form display_alv
 text
--> p1 text
<-- p2 text
form display_alv .
data repid like sy-repid.
REPID = SY-REPID.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
WA_LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL'.
WA_LAYOUT-TOTALS_TEXT = 'TOTAL'.
IF P_GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = repid
 IT_FIELDCAT = IT_FIELDTAB
 IT_SORT = IT_SORT
 IS_LAYOUT = WA_LAYOUT
TABLES
 t_outtab = itab[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 message e016 with 'Error in Display'.
ENDIF.
ELSEIF P_LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = repid
 IT_FIELDCAT = IT_FIELDTAB
 IT_SORT = IT_SORT
 IS_LAYOUT = WA_LAYOUT
TABLES
 t_outtab = itab[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 message e016 with 'Error in Display'.
ENDIF.
ENDIF.
endform. " display_alv
*& Form fill_fieldcat1
 text
--> p1 text
<-- p2 text
form fill_fieldcat1 changing d_fcat type slis_t_fieldcat_alv.
data repid like sy-repid.
data d_fcat1 type slis_t_fieldcat_alv with header line.
REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 I_PROGRAM_NAME = repid
 I_INTERNAL_TABNAME = 'ITAB'
 I_STRUCTURE_NAME = 'ZGILL_MAIN'
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
 ct_fieldcat = d_fcat[]
EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 message e016 with 'Error in preparing fiedl catalog'.
ENDIF.
loop at d_fcat into d_fcat1.
case d_fcat1-fieldname.
when 'NAME'.
d_fcat1-reptext_ddic = 'Emp Name'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'PERNR'.
d_fcat1-reptext_ddic = 'Emp Num'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'ORG'.
d_fcat1-reptext_ddic = 'Org Unit'.
MODIFY D_FCAT FROM D_FCAT1.
endcase.
clear d_fcat1.
endloop.
endform. " fill_fieldcat1
*& Form sort_list
 text
--> p1 text
<-- p2 text
form sort_list .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'DOB'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NAME'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
endform. " sort_list
*& Form fill_fieldcat
 text
--> p1 text
<-- p2 text
form fill_fieldcat .
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'TRAFFIC'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'PERNR'.
WA_FIELDCAT-SELTEXT_L = 'EMP NUMBER'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
when 'maktx'.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'NAME'.
WA_FIELDCAT-SELTEXT_L = 'EMP NAME'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 15.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ORG'.
WA_FIELDCAT-SELTEXT_L = 'ORG UNIT'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'DOB'.
WA_FIELDCAT-SELTEXT_L = 'BIRTH DATE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 12.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'SALARY'.
WA_FIELDCAT-SELTEXT_L = 'SALARY'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
WA_FIELDCAT-do_sum = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
endform. " fill_fieldcat

Problem with printing the sub totals

Hi,
I am having a problem with smart forms in printing the line items of invoice.
I need to print the sub total of each page and need to display the sub total in the footer, with the caption 'Balance C f/w'. It works fine in some cases.
In some cases, the sub total is getting printed wrongly, because its adding the amount of the next page's first line item also. I checked the form page by printing SFSY-PAGE along with the line item's text. It's observed that, the vlaue of SFSY-PAGE for the first line item's displayed in the second page is '1'. Due to this, the amount for this line item also is getting calculated with the sub total of the previous page.
Could you please suggest a solution for this problem?
Thanks & Regards,
John

Hi,
In smartforms, in the general attributes of the FIRST page the Mode for the page counter should be 'Initialize counter' and for the NEXT page it should be 'Increase counter'.
Please check this in your smartform.
Regards,
Ram

Calculate totals and sub totals

hi everybody
can u plz suggest me how to write code for getting sub totals and totals
regards
hridhaya

Hello hridhayanjili
SAP provides us with the ABAP statement COLLECT to summarize totals.
I will give you an example from which you should be able to develop you own solution.
Let's assume we have an itab containing materials. The itab has the following line structure: MANDT, MATNR, QUANTITY. To calculate subtotals we require a second itab that is identical to the first one.
Now here is the coding:
data:
gt_itab TYPE STANDARD TABLE OF <structure>,
gt_itab_collect TYPE STANDARD TABLE OF <structure>,
gt_itab_total TYPE STANDARD TABLE OF <structure>.
gs_entry TYPE <structure>.
* NOTE: <structure> stands for a named DDIC structure or
* a type definition, not a field symbol.
* gt_itab contains our materials
LOOP AT gt_itab INTO gs_entry.
 COLLECT gs_entry INTO gt_itab_collect.
ENDLOOP.
* NOTE: Assuming we had 10 entries in gt_itab of
* 3 different materials we end up with 3 entries in
* gt_itab_collect that contain the quantities summarized.
* To calculate the total one could LOOP over
* gt_itab_collect and summarize the values. Another way
* is shown here:
CLEAR: gs_entry-matnr.
MODIFY gt_itab FROM gs_entry
 TRANSPORTING matnr
 WHERE ( matnr IS NOT INITIAL ).
* We clear the material no.
LOOP AT gt_itab INTO gs_entry.
 COLLECT gs_entry INTO gt_itab_total.
ENDLOOP.
* NOTE: because we have the same value for CLIENT and
* MATNR in every line we will end up with a single line
* in gt_itab_total.
Please read the documentation of the COLLECT statement carefully because the structure of your itab (i.e. the order of the fields, especially those that will be summarized) is important.
Regards
 Uwe

Regarding totals and sub totals text in alv

Hi all,
i am displaying Totals and subtotals ......but i want to display the text before the the Totals and Subtotals.
Please help me in regarding this..
Thanks in advance,
S.Gangi reddy.

hi,
check this report.
*& Report ZGM_ALV_SUBTOTAL_TEXT *
*& Author :
*& Date :
*& Description :
*& Modification History
REPORT ZGM_ALV_SUBTOTAL_TEXT .
*& Table declaration
TABLES: ekko.
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.
*& Type declaration
Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
 ebeln TYPE char30, " Document no.
 ebelp TYPE ebelp, " Item no
 matnr TYPE matnr, " Material no
 matnr1 TYPE matnr, " Material no
 werks TYPE werks_d, " Plant
 werks1 TYPE werks_d, " Plant
 ntgew TYPE entge, " Net weight
 gewe TYPE egewe, " Unit of weight
 END OF x_data.
*& Internal table declaration
DATA:
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
Internal table for ALV Display events
i_events TYPE slis_t_event,
Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.
*& Work area declaration
DATA:
wa_ekko TYPE x_data,
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
*& Constant declaration
CONSTANTS:
 c_header TYPE char1
 VALUE 'H', "Header in ALV
 c_item TYPE char1
 VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
Select data from ekpo
SELECT ebeln " Doc no
 ebelp " Item
 matnr " Material
 matnr " Material
 werks " Plant
 werks " Plant
 ntgew " Quantity
 gewei " Unit
 FROM ekpo
 INTO TABLE i_ekpo
 WHERE ebeln IN s_ebeln
 AND ntgew NE '0.00'. IF sy-subrc = 0.
 SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.
To build the Page header
PERFORM sub_build_header. "* To prepare field catalog
PERFORM sub_field_catalog. "* Perform to populate the layout structure
PERFORM sub_populate_layout."* Perform to populate the sort table.
PERFORM sub_populate_sort."* Perform to populate ALV event
PERFORM sub_get_event.
END-OF-SELECTION.
* Perform to display ALV report
PERFORM sub_alv_report_display.
*& Form sub_build_header
 To build the header
 No Parameter
FORM sub_build_header .
Local data declaration
DATA: l_system TYPE char10 , "System id
 l_r_line TYPE slis_listheader, "Hold list header
 l_date TYPE char10, "Date
 l_time TYPE char10, "Time
 l_success_records TYPE i, "No of success records
 l_title(300) TYPE c. " Title
Title Display
l_r_line-typ = c_header. " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.
* Run date Display
CLEAR l_date.
l_r_line-typ = c_item. " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
 l_date.ENDFORM. " sub_build_header
*& Form sub_field_catalog
 Build Field Catalog
 No Parameter
FORM sub_field_catalog .
Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING: '01' '01' 'EBELN'
'I_EKPO' 'L'
 'Doc No'(003) ' ' ' ' ' ' ' ', '01' '02' 'EBELP' 'I_EKPO' 'L'
 'Item No'(004) 'X' 'X' ' ' ' ', '01' '03' 'MATNR' 'I_EKPO' 'L'
 'Material No'(005) 'X' 'X' ' ' ' ', '01' '03' 'MATNR1' 'I_EKPO'
 'L'
 'Material No'(005) ' ' ' ' ' ' ' ',
 '01' '04' 'WERKS' 'I_EKPO' 'L'
 'Plant'(006) 'X' 'X' ' ' ' ', '01' '04' 'WERKS1' 'I_EKPO' 'L'
 'Plant'(006) ' ' ' ' ' ' ' ', '01' '05' 'NTGEW' 'I_EKPO' 'R'
 'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.
" sub_field_catalog*&----
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos TYPE sycurow
 p_colpos TYPE sycucol
 p_fldnam TYPE fieldname
 p_tabnam TYPE tabname
 p_justif TYPE char1
 p_seltext TYPE dd03p-scrtext_l
 p_out TYPE char1
 p_tech TYPE char1
 p_qfield TYPE slis_fieldname
 p_qtab TYPE slis_tabname.
 Local declaration for field
 catalog
DATA: wa_lfl_fcat TYPE slis_fieldcat_alv.
wa_lfl_fcat-row_pos = p_rowpos. "Row
wa_lfl_fcat-col_pos = p_colpos. "Column
wa_lfl_fcat-fieldname = p_fldnam. "Field Name
wa_lfl_fcat-tabname = p_tabnam. "Internal Table Name
wa_lfl_fcat-just = p_justif. "Screen Justified
wa_lfl_fcat-seltext_l = p_seltext. "Field Text
wa_lfl_fcat-no_out = p_out. "No output
wa_lfl_fcat-tech = p_tech. "Technical field
wa_lfl_fcat-qfieldname = p_qfield. "Quantity unit
wa_lfl_fcat-qtabname = p_qtab .
"Quantity table
IF p_fldnam = 'NTGEW'.
 wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.
" sub_fill_alv_field_catalog*&----
*& Form sub_populate_layout
 Populate ALV layout
 No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'.
" Optimization of Col width
ENDFORM. " sub_populate_layout*&----
*& Form sub_populate_sort
 Populate ALV sort table
 No Parameter
FORM sub_populate_sort .
Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.
" sub_populate_sort*&----
*& Form sub_get_event
 Get ALV grid event and pass the form name to subtotal_text
 event
 No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 4
 IMPORTING
 et_events = i_event
 EXCEPTIONS
 list_type_wrong = 0
 OTHERS = 0.
Subtotal
READ TABLE i_event INTO l_s_event
 WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
 MOVE c_formname_subtotal_text TO l_s_event-form.
 MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM.
" sub_get_event*&----
*& Form sub_alv_report_display
 For ALV Report Display
 No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .
This function module for displaying the ALV
report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = l_repid
 i_callback_top_of_page = 'SUB_ALV_TOP_OF_PAGE'
 is_layout = wa_layout
 it_fieldcat = i_fieldcat
 it_sort = i_sort
 it_events = i_event
 i_default = 'X'
 i_save = 'A'
 TABLES
 t_outtab = i_ekpo
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.
ENDFORM.
" sub_alv_report_display*&----
 FORM sub_alv_top_of_page
 Call ALV top of page
 No parameter
FORM sub_alv_top_of_page. "#EC CALLED*
*To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = i_alv_top_of_page.
ENDFORM.
"alv_top_of_page*&----
*& Form subtotal_text
 Build subtotal text
 P_total Total
 p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
 p_total TYPE any
 p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
 p_subtot_text-display_text_for_subtotal
 = 'Material level total'(009).
ENDIF.
Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
 p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_textSelection screen:
\[removed by moderator\]
Edited by: Jan Stallkamp on Sep 3, 2008 6:17 PM

Replication with Domain and Sub domain in Active directory sites and services

I seen many AD enviroments and know that when you have mutiple DCs you use Active Directory Sites and services to replicate using the NTDS Settings. If you have a Domain and sub domain do you need to do this as well or does it sync up automatically because
it's a sub domain? A see a couple of domains where the NTDS settings isn't being used to snyc with the child domain. Just wondering if that is normal or will it cause authentication errors?

I seen many AD enviroments and know that when you have mutiple DCs you use Active Directory Sites and services to replicate using the NTDS Settings. If you have a Domain and sub domain do you need to do this as well or does it sync up automatically
because it's a sub domain? A see a couple of domains where the NTDS settings isn't being used to snyc with the child domain. Just wondering if that is normal or will it cause authentication errors?
Two way transitive trusts are configured automatically when you create a child domain or tree root domain. You don't have to worry about site/subnet or replication part at least from trust perspective. But make sure site's names are unique in each domain.
How Domain and Forest Trusts Work
http://technet.microsoft.com/en-us/library/cc773178%28v=ws.10%29.aspx
http://technet.microsoft.com/en-us/library/cc730868.aspx
http://blogs.technet.com/b/askds/archive/2008/09/24/domain-locator-across-a-forest-trust.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Working with Folders and Sub-Folders

I'm updating this big site, and its pages are organized into
folders. I've only ever organized my images and .pdf files with
folders not my html files but all my prior sites have never had so
many files as this one. It’s starting to drive me crazy
though because pages in folders aren't connecting to scripts in the
scripts folder, menus aren't working right because of it and I'm
not sure what I can do to fix it.
My question is if images are showing up in these sub-pages,
the linked css is being applied in these sub-pages why are the
scripts not working in the sub-pages? For example, all the top
level pages easily connect to the rotating JavaScript banner, but
as soon as you go into a sub-folder page the banner disappears. All
these files are being updated via templates so any changes I'm
doing is affecting all the pages the same. That’s why
it’s confusing me why an image would connect the same but a
script wouldn't. Don't they search for their links root down or
does it search the folder its in down? How can you get templates to
work under such conditions where files are both in the root and in
folders and sub-folders?
Site reference is:
http://golfforkids.net/focus/index.html
Please note that this is a temporary domain for testing. The
top menu will pop up a window saying that it needs to be
registered. They are, just not to that domain and I don't have
access to the native domain. Sorry for the inconvenience!
Thank you for any clarification!!!

''"Are you subscribed to those subfolders?
File (Alt-F) - Subscribe"''
Please see #2 in original post:
''"2) Trying to Subscribe to folders only shows Inbox, not sub-folders for Inbox."''
Attached is an image illustrating this (this screenshot was taken after forcing Thunderbird to show Inbox folders as described in #3 of OP)
{In OP I was unable to attach images}

Drill Totals and Sub Totals

Hi
I have a webi report of the following structure.
Fleet Center- Section on this column Information
Driver Name- Break on this column
No of Hours spent-measure
I have subtotal by driver name------- then by fleet -
and then grand total of all the fleet centers
The webi report also have a drop down ( drill enanbled) feature on Fleet center and Driver Name
When a user selects a particular driver name (e.g Mark Edwards) ...
the report shows driver total, fleet total and grand total.....
The probelm is for a single driver I want to represent same information at fleet level and grand total level.....but on my report it shows total for all the drivers on that fleet......and grand total of all fleet.....even though in the drop down I have one driver selected.
Is this requirement a possibility..?....or is there a way to hide section total and grand total when I select only a particular driver ... as showing the subtotals by fleet and grand total for just one driver does not make sense.
Thank you,
boe user

A couple of options come to mind. DrillFilters function could be used on the Driver Name object. If its non-blank then a driver has been selected in which case you would use a formula to not show the total that you dont want visible
something like this for section total cell (not real code, just an pseudo code):
IF DrillFilters([Driver Name]) = "" THEN [section total measure]
(we rely on the implied ELSE to return NULL)
same for Grand Total
another variation is to use DrillFilters and optional hiding of cells or blocks. The latter is something that as of R3 webi it doesnt have as standard but you can fake it.
Try my first suggestion first and if you dont like the result we can talk about optionally hiding the section and grand totals when a value is selected

Problem with subtotal, and the total icon is not displayed at the toolbar

Hi all,
I'm currentlyhaving difficulties working with the subtotal and the grandtotal. I have the code in the right place like the sort table
CLEAR k_sort.
ADD 1 TO k_sort-spos.
k_sort-fieldname = pv_fieldname.
k_sort-up = c_x.
k_sort-subtot = pv_subtot.
APPEND k_sort TO i_sort.
and the fieldcatalog
CLEAR k_fieldcat.
add 1 to k_fieldcat-col_pos.
k_fieldcat-fieldname = pv_fieldname.
k_fieldcat-tabname = c_tabname.
k_fieldcat-seltext_l = pv_seltext.
k_fieldcat-outputlen = pv_outputlen.
k_fieldcat-datatype = pv_datatype.
k_fieldcat-do_sum = pv_dosum.
APPEND k_fieldcat TO i_fieldcat.
but it didn't seems to show both the total and subtotal. Even the icon is not displayed at the ALV toolbar. The field which I need the total is a currency field. I even try other fields (interger fields) but with no luck. I'm using REUSE_ALV. Any help is greatly appreciated.

hi,
In field catalog for the particular column which you want to sum make that as 'X'.
say
WHEN'MATNR'.
it_fcat-do_sum = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = report_id
 i_grid_title = ws_title
* i_callback_top_of_page = 'TOP-OF-PAGE'
 is_layout = wa_layout
 it_fieldcat = i_fieldcat[]
 it_sort = i_sortcat
 i_save = 'A'
 it_events = i_events
 TABLES
 t_outtab = i_reportdata1
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
This will enable.

Totas and sub totals in ALV grid display

Hi all,
how can I get the total for an integer field in internal table. I am using the following code, but unable to display the total. Can anyone give the reason for the same.
Thank you,
Usha
REPORT ZTEST_SUB .
TABLES : vbak.
TYPE-POOLS: slis.
SELECT-OPTIONS : s_vkorg FOR vbak-vkorg,
 s_kunnr FOR vbak-kunnr,
 s_vbeln FOR vbak-vbeln.
SELECTION-SCREEN : SKIP,
 BEGIN OF LINE,
 COMMENT 5(27) v_1 FOR FIELD p_max.
 PARAMETERS p_max(2) TYPE n DEFAULT '2' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA: ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
DATA: BEGIN OF gt_vbak OCCURS 0,
 vkorg LIKE vbak-vkorg,
 kunnr LIKE vbak-kunnr,
 vbeln LIKE vbak-vbeln,
 test type I,
 END OF gt_vbak.
START-OF-SELECTION.
PERFORM f_read_data.
loop at gt_vbak.
gt_vbak-test = 1.
modify gt_vbak.
endloop.
PERFORM f_display_data.
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
 FROM vbak UP TO p_max ROWS WHERE
 kunnr IN s_kunnr AND
 vbeln IN s_vbeln AND
 vkorg IN s_vkorg.
ENDFORM.
FORM f_display_data.
DEFINE m_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-ref_tabname = 'VBAK'.
 ls_fieldcat-ref_FIELDname = &2.
 ls_fieldcat-do_sum = &3.
 ls_fieldcat-cfieldname = &4.
 append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
 add 1 to ls_sort-spos.
 ls_sort-fieldname = &1.
 ls_sort-up = 'X'.
 ls_sort-subtot = &2.
 ls_sort-group = '*'.
 append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA: ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
 m_fieldcat 'VKORG' 'VKORG' '' ''.
 m_fieldcat 'KUNNR' '' '' ''.
 m_fieldcat 'VBELN' '' '' ''.
 m_fieldcat 'TEST' '' 'X' ''.
 m_sort 'VKORG' ''.
 m_sort 'KUNNR' ''.
 m_sort 'VBELN' ''.
 m_sort 'TEST' 'X'.
 ls_layout-cell_merge = 'X'.
 LS_LAYOUT-WINDOW_TITLEBAR = 'test window'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 IS_LAYOUT = ls_layout
 IT_FIELDCAT = lt_fieldcat
 IT_SORT = lt_sort
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = gt_vbak
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.

hi
REPORT ZTEST_SUB .
TABLES : vbak.
TYPE-POOLS: slis.
SELECT-OPTIONS : s_vkorg FOR vbak-vkorg,
s_kunnr FOR vbak-kunnr,
s_vbeln FOR vbak-vbeln.
SELECTION-SCREEN : SKIP,
BEGIN OF LINE,
COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '2' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA: ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_layout TYPE slis_layout_alv.
DATA: BEGIN OF gt_vbak OCCURS 0,
vkorg LIKE vbak-vkorg,
kunnr LIKE vbak-kunnr,
vbeln LIKE vbak-vbeln,
test type I,
END OF gt_vbak.
START-OF-SELECTION.
PERFORM f_read_data.
loop at gt_vbak.
gt_vbak-test = 1.
modify gt_vbak.
endloop.
PERFORM f_display_data.
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
FROM vbak UP TO p_max ROWS WHERE
kunnr IN s_kunnr AND
vbeln IN s_vbeln AND
vkorg IN s_vkorg.
ENDFORM.
FORM f_display_data.
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-ref_FIELDname = &2.
ls_fieldcat-do_sum = &3.
ls_fieldcat-cfieldname = &4.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
ls_sort-subtot = &2.
ls_sort-group = '*'.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA: ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' '' ''.
m_fieldcat 'VBELN' '' '' ''.
m_fieldcat 'TEST' '' 'X' ''.
m_sort 'VKORG' ''.
m_sort 'KUNNR' ''.
 m_sort 'VBELN' 'X'.
*m_sort 'TEST' 'X'.
ls_layout-cell_merge = 'X'.
LS_LAYOUT-WINDOW_TITLEBAR = 'test window'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = ls_layout
IT_FIELDCAT = lt_fieldcat
IT_SORT = lt_sort
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = gt_vbak
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
Message was edited by: Ashok Parupalli

Report with Title and sub-title

I am looking for a way to create a report with a title and a sub-title inside the same border.
I need a title in the title bar then some text under the title bar that describes the report and then the column headings followed by the data. So far the only way I can come close is to use two regions. The only problem with this approach is that there is not a border around the whole thing.
The basic look is the same as the Substring report in the Edit Page Template page of App Express.

Have you tried using the Region Header text for the report/form region?
Earl

Budget check for PM orders with main and sub-projects

Hello
We have a scenario wherein we have created a main project and a sub-project. We have linked the sub-project to main project. We have also assigned budget to the main project. We have created a PM order wherein we are trying to enter the costs by entering the hours of work. We have configured the budget profile and set the tolerance limites and assigned to main project. The requirement here is we need to have have costs check againt the budget that been available in the main project. But the system is checking the budget of the sub-project. Please share if any specific setting is required to check the budget of main project instea sub-project.
Regards,
Basav

I also double checked, you are right there is no forum for PM, I dont think I could suggest much since there isnt a dedicated forum, but you can try posting this query in the ABAP forum probably some abap'r who has worked with PM module should have a look. Also if possible try to connect with one of the moderators out here and ask for assistance in starting something for PM
Thanks,
GLM

Trouble with Menu and sub menu widget

I am a newbie, hence my current question. I have developed a site for the company that I work for, the basic navigation menu widget has been added, however, the owner wanted a sub-menu for only one of the categories/menu tab, but I am having trouble getting/adding a drop down for one of the menus, it is doing an all or nothing when I try to add the submenu, regardless of only editing the one. What am I missing?

Thanks, that is exactly what I was missing. And that did the trick. I know it was probably a dumb question, but I'm still learning my way around the Muse.

BIWS with Breaks and Sub-Total

Similar Messages

Maybe you are looking for