Black macbook working fine should I send it in?
Hey guys i bought the 1499 black mackbook about 4 weeks ago instore. The macbook is a week 33 model so I assume it has been sitting in the stockroom for a while. I have no problems at all. I was just wondering if I should send it in to have the internals upgraded before my warranty runs out to prevent the macbook from having the issue down the road?
"If it ain't broken, don't fix it." Star Trek's Scotty character played by James Doohan believes this, and so do I.
However, you can buy AppleCare anytime in the first year of ownership, should the issues emerge after the first year of ownership, or if you desire to have someone you can call 7 days a week to ask questions about Mac software at no extra charge other than the initial AppleCare price, and your coverage will extend to three years from the computer's date of purchase. After that year is up, you can't purchase that extension and will have to pay a per incident plus parts and labor for repairs. You decide which is more worth it to you.
Similar Messages
-
My MacBook works fine wifi everywhere except for home. The home wifi is fine with the iPad and iPhone, so I assume the issue is with my computer. My computer works fine on wifi networks elsewhere. The only problem is at home.
The computer "connects to the wifi," but browsers and other internet-dependent software do not work. Curiously, if I connect the ethernet cord that doesn't work either. Usually if I reset the modem to factory settings twice (for some reason, once doesn't do the trick), my computer will fully connect to the wifi. However, in a few days, it goes back to not working.
Today, resetting the modem didn't work. I could only get wifi connection while in safe mode, but not in normal mode. So, the issue seems to be software not hardware. I have tried starting new accounts in normal mode, but those also don't connect properly to internet.
Not sure if this is relevant, but this problem started when my building switched internet providers from ComHem to Telia (I live in Sweden).
What do you recommend I do?
Thanks!
PS I use Snow Leopard: OS 10.6.8Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect. -
"I have a 5th generation airpot extreme. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal. I shut down my Mac, unplugged the modem, router, let sit for 10 seconds, started it up and 'presto' everything worked. Then yesterday all but the macbook stopped receiving wifi again. I tried the same scenario as the other day but nothing. I reset the airport extreme to factory settings and still nothing. Is the airport extreme not working?
If it was not working the Mac would not get a signal. Restart the IOS devices and reconnect to the network
-
Hi , i spilled sprite on my macbook pro mostly onto speakers but however, i dried it off immideately and the macbook is working fine so far. Speakers still work normal but i am worried thatere might be some problems later on. Please suggest me some good ideas to furhter mae sure that the mac is fine?
I suggest that you take the MBP into an Apple store genius bar for a free evaluation. There are liquid sensors inside and they should check if any have been activated. This may give you a clue as to what you may expect regarding future reliability.
Ciao. -
hi all - i have an AS2 contact form using php to send the info to my email address - it all works fine except this ..... rather than having an empty comments box in the flash movie i had added a whole bunch of feedback questions that the user can comment yes/no to in the comments box (my feedback questions were added into the input text box in cs3 so are there when the user opens the contact page .. i have set the maximum characters to 10000 so no worries that its that that is stopping it all coming through in the email ..... basically when i go to my form online and send it i get it through as an email but with only three quarters of the feedback text in it ...... i have tried a zillion ways a round this, tried other contact forms and php and always end up with the same problem ... any ideas any one ?
this is the AS....
stop();
a =0;
function validate () {
if (from.length>=7) {
if (from.indexOf("@")>0) {
if ((from.indexOf("@")+2)<from.lastIndexOf(".")) {
if (from.lastIndexOf(".")<(from.length-2)) {
a = 1;
// email is fine
function formcheck () {
validate ();
trace(a);
if (fname = "" or telno eq "" or comments eq "" or from eq "") {
stop();
error = "You have left blank fields, please fill in all fields, thank you";
} else {
emailcheck ();
function emailcheck (){
if (a != 1){
stop();
error = "Email address not valid";
} else {
loadVariablesNum("mail.php3", 0, "POST");
gotoAndStop(2);
..........this is the php
<?php
$adminaddress = "[email protected]";
$sitename = "Flash Site Form Mailer";
mail("$adminaddress","Info Request",
"A customer at $sitename has made the following enquiry\n
First Name: $name
Company Name: $company
Telephone: $telno
Email: $from\n
The visitor commented:
$comments
Logged Info :
Using: $HTTP_USER_AGENT
Hostname: $ip
IP address: $REMOTE_ADDR
Date/Time: $date","FROM:$adminaddress");
?>
any help much appreciatedi think you should not use $HTTP_USER_AGENT.
and use loadvars instead of loadvariablesnum:
stop();
a =0;
function validate () {
if (from.length>=7) {
if (from.indexOf("@")>0) {
if ((from.indexOf("@")+2)<from.lastIndexOf(".")) {
if (from.lastIndexOf(".")<(from.length-2)) {
a = 1;
// email is fine
function formcheck () {
validate ();
trace(a);
if (fname = "" or telno eq "" or comments eq "" or from eq "") {
stop();
error = "You have left blank fields, please fill in all fields, thank you";
} else {
emailcheck ();
var sendLV:LoadVars=new LoadVars();
function emailcheck (){
if (a != 1){
stop();
error = "Email address not valid";
} else {
sendLV.name=fname;
sendLV.telno=telno;
sendLV.company=company; //assuming company is a variable in your flash
sendLV.comments=comments;
sendLV.send("mail.php3", "POST");
gotoAndStop(2);
//..........this is the php
<?php
$adminaddress = "[email protected]";
$sitename = "Flash Site Form Mailer";
$from=?;//you need to define this variable
$name=$_POST['name'];
$telno=$_POST['telno'];
$company=$_POST['company'];
$comments=$_POST['comments'];
$body=
"A customer at $sitename has made the following enquiry\n
First Name: $name
Company Name: $company
Telephone: $telno
Email: $from\n
The visitor commented:
$comments";
mail($adminaddress,"Info Request",$body);
?> -
Macbook works fine when plugged in, turns off when unplugged.
Hello all,
As stated my 2008 Unibody 13 inch, serial number W8******1AX turns on and works fine when it is connected to power.
When it is unplugged it instantly turns off and turns its fans on full until it depletes the battery (so it is obviously getting power.. just not where I want it)
Since the problem began I have tried two new batteries, neither of which had any different symptoms.
Before this, the computer had an intermittent life, it would turn off when it saw fit, which got progressively worse.
I have followed the guides to resetting the SMC but have had no luck
I have been running it without the battery (to save it charging and discharging for no reason) and sometimes when plugged in without a battery
the magsafe green indicator light goes from dim to bright.
With the battery installed it stays bright orange until it is charged and then switches to bright green.
(I have tried it with another charger, same symptoms)
Here is the Battery Read out;
Battery Information:
Model Information:
Serial Number: ?00€›Æ⁄¬+9tt
Manufacturer: GSA-1280
Device Name: ASMB016
Pack Lot Code: 3230
PCB Lot Code: 30db
Firmware Version: ddae
Hardware Revision: dac2
Cell Revision: 2b39
Charge Information:
Charge Remaining (mAh): 4113
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 4200
Health Information:
Cycle Count: 1
Condition: Normal
Battery Installed: Yes
Amperage (mA): 379
Voltage (mV): 12275
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Automatic Restart on Power Loss: No
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Battery Power:
System Sleep Timer (Minutes): 2
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00ebc719
Charging: Yes
Power Events:
Repeating Events:
Type: Wake or Power On
If this at all helps.
I'm at my wits end with this thing, I know it is getting on in age, but other then this, it has been flawless in its operation.
If anyone has any suggestions I would be happy to hear them.
Many thanks!!
<Edited By Host>There may be a hardware cause behind the symptoms you cite, so a diagnostic
is recommended to see which parts are weak or failed in the computer. A visit to
an Apple Store with Genius bar may be helpful, as they can perform testing there.
A call ahead or use their web page, to schedule an appointment, is advised.
In the US and Canada, the Genius bar at a retail Apple Store can perform
a diagnostic service, for no fee, even on Apple products without AppleCare.
See links:
Apple - Concierge
Genius Bar - Apple Retail Store:
http://www.apple.com/retail/geniusbar/
List of Apple Stores, cities, countries:
http://www.apple.com/retail/storelist/
Also authorized Apple service providers who can test, repair and guarantee their
work should be able to handle an out-of-warranty older Mac, within age limits...
Ones too old for the Apple Store could be serviced at a Specialist, instead.
•Find Locations - Sales, Service, Training, Consulting:
https://locate.apple.com/
•Did you try resetting the System Management Controller?
Intel-based Macs: Resetting the System Management Controller (SMC)
•A reset of NVRAM may help with some issues:
About NVRAM and PRAM
•Calibrating is part of maintenance, esp with older portables:
Apple Portables: Calibrating your computer's battery for best performance
•The power adapter can be problematic and cause issues, so there's this:
Apple Portables: Troubleshooting MagSafe adapters
Also another item, other than keeping the magnetic connections clean of
debris, grime, and corrosion, is to check the MagSafe Board or have it
checked as part of a greater diagnostic. This board is behind the port
that supplies the computer and the battery with power from the adapter.
When it partially fails or if/when one of the connecting wires or plug fails
you can find odd issues or partial use. The battery may charge but it
may not be able to power the computer, and other odd effects.
https://www.ifixit.com/Device/MacBook
In older portable Macs, this was generally called a 'DC-in board' and as
such, you could read about it in an iFixit repair guide for the MacBook
model you have. These vary so the matching article is recommended to
see if that is something you may want to try. But I would have diagnostic
testing done and avoid additional damages from attempted DIY efforts.
There have been a few reports of other failure on the logic board that
contributes to a partial failure of the charging system, so about all this
may do is troubleshoot around the failure without finding an exact cause.
However it goes...
Good luck & happy computing! -
I have spilled water on my Macbook Air keyboard. It switched off immediately by itself when this happened. I kept it off, turned it upside down on top of a towel and left it in a dry place for 24hours. I turned it back on and it seems to be working fine..
Should I still take it into the store to check that it is completely ok?Yes. It certainly will not hurt to do so to have the technicians take a good look at it. The evaluation will be free at an Apple store genius bar.
Ciao. -
I have an iMac and MacBook Pro, both running Snow Leopard at current maintenance levels. I have an HP8500 printer connected via wi-fi. All have been working well until just recently. Now, the iMac cannot communicate with the printer. The printer icon shows offline. The printer is still online to the MacBook. I suspect a related problem is that when I try to access files on the MacBook from the iMac, I get a message that they are unavailable, but re-clicking once or twice to re-try works and the files are accessible. The only problem is that I cannot modify them from the iMac, even though the sharing options are set for update capability.
Resetting the printer and re-booting the iMac don't help.Yosemite is a big problem.
I recommend you factory reset the TC and start over.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Redo the setup from Yosemite.. it needs to be directly involved in the setup to remember anything.
Please use short names.. no spaces and pure alphanumeric. eg TCgen5 base station name. TCwifi as wireless name.
Set password WPA2 Personal security which is pure alphanumeric mixed case and numbers.
Please empty out all the old wireless names from your devices.. reboot them and rediscover the network.
If it still fails tell us. -
Ipod clicks but works fine. should i be worried?
It clicks... almost randomly, only once. its not often or consistent. Other than the noise, everything works like it should, no lag or distorted sound/video
should i be concerned? and start looking into a new ipod.
It is a 120gb classic, btwMy iPod Classic clicks as well, I think it's normal. HOWEVER, if you drop it and it starts clicking really loudly, it might be a sign of a problem. I dropped my old one a few times, then when i took it to listen to it in my room and accidentally stuck a magnet on it, it completely died. Apparently, there was a harddrive issue that could not be fixed... luckily I had a warranty.
But yes, it's normal that it "clicks" .. personally I say that it "hiccups" or it "burps" ... :P -
On ipad facetime works fine but cannot send or receive text messages
how do i get my text messageing to work on ipad
Depends on exqaactly what "doesn't work" means. Can you describe what happens when you try?
Also, you are aware that Messages on iPad is for iMessges only? It doesn't do SMS. -
Yesterday my macbook worked fine...
now it will only boot up in "safe mode" Is this a hard drive problem?
Easrlier this year I went in for a liquid damage issue but everything looked fine at the time. I am worried that this is the culmination of that past damage. :/Is it typing in all caps? Perhaps the liquid damage affected the shift key.
-
HT201415 iphone 4s works fine but wont send messages
iphone 4s stops sending message just at end of time bar red exclamation mark appears.
O2 network but they cant help Any ideasYes you were right thanks. I had a pay monthly sim card when I am on a pay and go tariff. All sorted now.
-
BI Publisher 11g Trial dont work fine , send ERROR
Hi.
I Install BI PUblisher 11G Trial in a new clean server with :
+ Windows 2008 R2 Foundation Spanish with SP 1
+ Download, Install BI Publisher 11g Trial
+ Execute Demo Report "Revenue Budget Actual and Detail "
+ In Inteactive mode work fine
+ In HTML send ERROR : "java.lang.ArrayIndexOutOfBoundsException: 0"
+ In PDF the pivot table don't display any value higer 1.000.000
This is a bug ?,how correct this errors ?
Thank you very much
CarlosHi Carlos,
Are you still experiencing this problem?
I do not see this on my installation on Windows7 64 bit running in English.
I also set the BI Publisher UI language and Report Locale to Spanish and all three output types:
Interactive, HTML and PDF render correctly.
When you say that the pivot table doesn't show any values higher than 1.000.000 ... what does it show instead?
How do the other sample reports look for you?
Mike
Edited by: mdonohue on Jun 5, 2012 4:45 PM -
My 15" laptop screen is dark, but computer works fine with plug in large screen
I am not sure if I hit a key combo or something, but laptop screen is off. Laptop is on and works fine and I can see everything on large plugged in 27" screen, nothing on laptop. It is as if I accidentally hit a toggle switch combo to turn off laptop screen while leaving on a plugged-in screen, like you can on a PC when going between laptop and, for example, a projector. any ideas? I recently switched to mac after 20 years on a PC. New MacBook pro.
Hi, nope, tried that again just to be sure. Thanks though. The screen is completely black. Worked fine yesterday and last night.
-
You tube just shows black screen, works fine in internet explorer.
Haven't upgraded or changed versions of firefox or added any plug=ins Im awarer of. Had several automatic updates come through of other programs, such as flash, ect. But I have refused to upgrade firefox due to having to give up screen grab which I love too much to do it, so have stayed with older version.
Had no problem with you tube in the past.hello, firefox 7 is affected by dozens of critical security vulnerabilities. please upgrade as soon as possible and use https://addons.mozilla.org/firefox/addon/screengrab-fix-version/ instead.
Maybe you are looking for
-
Neospeech only generates 1 sec audio in Captivate 6? Error
I am new to Text to Speech in Captivate but am dabbling. I have installed the NeoSpeech content and have selected Paul as the voice I want to use. I generate audio and then preview it and it only creates 1 second worth of audio. If I change the voice
-
Using Crystal Reports on a webserver without installation
Hello, I'm sure this has been asked before, but I cannot seem to find it. Is it possible in any way to use Crystal Reports.NET (VS2008) on a production server without installing the merge modules, runtimes, etc for an ASP.NET 2.0 web app? I'm moving
-
Why is the purge command running every hour, and freezing my system?
I noticed over the past several days that my mac pro will freeze for several seconds (clock stops, mouse/keyboard don't work. completely frozen) every hour, to the minute. I've tracked it down to the "purge" command, which is causing the problem. Bu
-
Why does Creative cloud keeps signing me out?
On my desktop Windows 8 Creative cloud keeps singing me out every time I log in, but I have no problem on my laptop Windows 8. What is up with that? I have red some other forums some other solutions ... well I have no OOBE folder to delete opm.db and
-
My IPad 2 used to turn the screen whatever way I held it and it's now stopped doing this ?any ideas ?