My IPad screen used to turn whatever way I held it it seems now to be stuck in one position ? Any ideas ?

My IPad 2 used to turn the screen whatever way I held it and it's now stopped doing this ?any ideas ?

you can lock the rotation. Under the volume rocker there's a little slide switch. THat serves one of two purposes, an all mute or a rotation lock.
Under 'settings' and 'general' you can choose what that switch does, all mute or rotation lock.
If you flipped that switch by mistake that could be the reason

Similar Messages

  • My ipad screen won't turn one way when I turn/bump my ipad (will do one side but not the other)

    My ipad screen won’t turn one way when I turn/bump my ipad (will do one side but not the other)

    Yes there is a rotation lock setting.
    First try the switch above the volume rocker. If that doesnt work then double click the home button. It should display a multitasking bar at the bottom of the screen. Slide that to the right and it should display a few settings including screen lock. Make sure that it is unchecked.

  • My iPad screen does not turning

    My iPad screen does not turning. What is problem?

    Hello Stephencho41,
    It sounds like you are unable to turn on your iPad. Although the following article is about the iPhone, the information and troubleshooting is the same for the iPad as well, so I recommend these steps specifically to help you out:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error-51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

    I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now,  my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • Some movies from my ATV1 I can only hear the movie while screen turns all black.  Later it will freeze if I try to fast forward.  Any ideas?

    Some movies from my ATV1 I can only hear while screen turns all black.  Later it will freeze if I try to fast forward.  Any ideas?

    Welcome to the Apple Community.
    This might be a problem with the movies themselves, where are they from, are they your own movies that you have converted yourself.

  • My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    This shouldn't happen. Take it back since it's new.

  • I have an ipod touch 3rd gen.I used the function of erasing all content and settings and now i am stuck on this screen with the apple logo and a loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

    i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

    Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen.  Connect the iPod to iTunes and you should be good to go.

  • My Ipod is frozen. I've tried holding the power and the sleep button for 10 sec until the apple came on the screen. After this i've tried again to turn it off and to slide the unlock button, but it didn't work! Any Ideas????

    My Ipod is frozen. I've tried holding the power and the sleep button for 10 sec until the apple came on the screen. After this i've tried again to turn it off and to slide the unlock button, but it didn't work! Any Ideas????

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc.  When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

    On i pod touch the orientation does not change when I turn it on it's side when using safari etc.  When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

    The user guide says:
    Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
    also appear only in landscape orientation.
    Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

  • My welcome screen used to have just my name and an icon.  Now it has my name on one side and guest user on the other. where did it come from and how do I get rid of it?

    My welcome screen used to have just my name and an icon.  Now it has my name on one side and guest user on the other. where did it come from and how do I get rid of it?

    Either you enabled the guest user, or you enabled Find My Mac, which requires there to be an active guest account for a thief to log into, so that they'll connect to the internet and allow you to locate it.

  • My iPad keeps losing its network connection.  All of the other wireless devices in my house are fine.  Any ideas as to what may be causing this?

    I have an IPad 1 with 16 G of memory and wiFi only.  For the last 2 days it has been dropping off of the wireless network repeatedly.  I have a wireless laptop next to it that is fine.  I am working where I normally do and have had no problems until the last couple of days.  My other IPad works just fine and my macbook pro is also having no problems.  Does any one have any idea where to begin troubleshooting?

    Just a follow up with a successful ending, I think.
    Got the replacement iPad2. Synced it on itunes, put in my old SIM card, and tried it out. I was heartbroken when it had exactly the same problem with wifi connectivity! Dropped my home wifi connection every few minutes or seconds. Had to be prompted to find home network.
    Then I tried turning OFF "Ask to Join Networks" as suggested by another poster on Apple Support. Suddenly, I had steady wifi connectivity. I left it that way overnight and even when I woke it from hibernating, it was still connected to wifi!!
    Thinking I found the answer, I decided to go back to my original iPad2. I had previously used "Erase All Content and Settings" when I received the replacement iPad2 and so, had to Restore from my iTunes. After doing that, my original iPad2 now holds a wifi connection!! (And I did NOT turn off "Ask to Join Networks".)
    So was it fixed by my erasing all content and settings and then restoring it back? Maybe. I called Apple Support again and they did not have any answers or suggestions. They did say that turning off "Ask to Join Networks" would have no effect on connectivity but it did stop the iPad to keep prompting me to choose a network to join! 
    I would be interested if this "fix" works for anyone else because I see it is a fairly common complaint.

  • I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    You need to use the computer's install disks to repair the hard drive or install a new OS.
    (58033)

  • After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
    * Preferences that have been modified are shown as '''bold (user set)'''.
    * Preferences can be '''Reset to the default''' or changed via the right-click context menu.
    -> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
    * Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
    * Change value from 0 to whatever you want over 0 (Default value is 50)
    * click OK
    -> Close the '''about:config''' tab and then Restart Firefox.
    See this post:
    * https://support.mozilla.com/en-US/questions/860894#answer-229574
    Check and tell if its working.

  • TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

    My iMac won't start up, or wake from sleep.  I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up.  Turning it on, you can hear the fan run, but the display stays dark.  Any ideas what to do?  Thanks!

    Mac doesn't boot
    Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
    Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
    Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
    Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
    Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
    [edit]
    What to do
    First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
    If that doesn't help continue doing the steps from below:
    1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
    2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
    3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
    4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
    5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
    6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
    7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
    7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
    8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
    8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

  • My lock screen picture is zoomed in. When I try to change it, I can't scale it, or try to zoom out to a position I like. It is permanently stuck in one position. I asked a friend that had ios7 and he can't relate, and has never seen it before

    My lock screen picture is zoomed in. When I try to change it, I can't scale it, or try to zoom out to a position I like. It is permanently stuck in one position. I asked a friend that had ios7 and he can't relate, and has never seen it before. Any help will do

    To back to the normal scale you have to disable the parallax.
    Settings -> General -> Accessibility -> Reduce Motion (turn off)
    You won't be able to put the wallpepr out of frame as ios 6 (earlier), but it stop to putting the annoying zoom.

Maybe you are looking for

  • Not working 2 of 4 usb ports on imac

    Why not working 2 of 4 usb ports on imac?

  • An error message "B channel out of service".

    Much thanks for you spent time to answer my question. I set the "E1 Enhanced Card" on VG200 for MGCP and work with CCM3.3.2. Also the IOS of VG200 has been upgraded to version 12.3<3a>. But this error also will generated of each B channel.Could you h

  • File to idoc mapping error

    Hi, I am mapping a flat file to idoc in xi. If I execute the test data it works fine. But in actual run, it gave me the following mapping error: com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_MT_A

  • Reverse proxy plugin does not like the POST method

    My second tier is not functionning properly when placed behind a S1WS6 with reverse proxy Client ====== SunOne web server with Passthrough ====== .NET app server & web services. The web server configuration (reverse proxy � libpassthrough.so) is conf

  • Accessing array of clusters

    Hey everyone, I'm new to Labview and am trying to create an array of clusters.  I have a 16-channel TTL I/O interface and I want to access each channel of the I/O.  Each channel has an input/output boolean button and an output high/low (0 or 5 V) boo