Black Screen (~10sec) on login/logoff on daisy chained monitors

Hey guys
In my setup, I have 2 daisy chained Dell U2414H monitors on the DisplayPort output of my nVidia GTX 760 . They work mostly fine, but I'm getting a roughly 10 seconds delay (black screen) at login and logout. This seems to be an issue with the Intel iGPU, as described on the wiki here. However, the strange thing is, that the black screen only occurs when using both monitors in the daisy chain config (regardless of DP1.2 setting on second monitor). Using one monitor on either HDMI or DisplayPort and even using both, one on HDMI and one on DP, works perfectly fine.
Any ideas? I might just end up buying an HDMI cable and be done with it, but I'd like to have as few cables going to my monitors as possible
Thanks!
This is my /etc/modprobe.d/blacklist.conf
#disable Intel iGPU
install i915 /usr/bin/false
install intel_agp /usr/bin/false
#disable WiFi
install rtl8821ae /usr/bin/false
Some outputs that might be relevant:
# lsmod | grep intel :(
intel_rapl 17356 0
intel_powerclamp 17122 0
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 163855 1
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
glue_helper 12649 1 aesni_intel
ablk_helper 12572 1 aesni_intel
cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel 26387 5
snd_hda_controller 26938 1 snd_hda_intel
snd_hda_codec 108536 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_pcm 88487 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd 73436 18 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
# lsmod | grep i915
no output
# lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 760] (rev a1)

mike_r wrote:
Do you have a nvidia graphics card? My laptop does this whenever I log out of xfce. Haven't found a workaround.
Mike
The computer itself is really old so I have an onboard intel graphics chipset, I also read on the forum about a person who had problems with nvidia but when he installed the nvidia package everything was solved.
I don't think there is something like this for intel?
EDIT: Ow nice! I installed the package: xf86-video-intel    2.10.0-1 for X.org Intel i810/i830/i915/945G/G965+ video drivers and everything works like a charm, so it was a driver problem after all, never expected it.
Last edited by ruurdkrekt (2010-03-15 11:14:00)

Similar Messages

  • Black screen with text LOGIN what to do?

    A few years ago I gave my oldest nephew my old G3 iBook when I purchased my G4 iBook. The G3 iBook work fine for him for several years. A few weeks ago the G3 iBook started taking forever to load/startup. I was eventually able to get it to read the original CD with software and loaded OS X 10 on the G3 iBook. Since all he used it for was iTune and Internet, I attempted to reload TIGER 10.3. Though it literal took all day Thursday for G3 iBook to load 10.3, it has gone back to black screen with text LOGIN:
    I seem to remember going through a similar problem when I purchased my G5 iMac several years ago, but have forgotten the solution.
    Yes it is old and out of date. BUT I will not be buying another iBook till 2008. However he "needs" a solution between now and then. His father (my brother) purchased him a $400 PC from Wal-Mart that does function, but I have never had to use a PC. And though he can decode how to use iTune and navigate the internet on the PC. Thumb drive and his Sony PSP show up on the desktop on a Mac as a hardrive. Neither appear as anything on his PC
    Please HELP
    Stupid question in addition I have an old G4 Desktop that is also 800 mhz yet it radically faster then the G3 iBook. Why?
    Steve
    Angry Dog Press
    Steven Noppenberger
    noppie@angrydogpress
    www.angrydogpress.net

    My 13 year old nephew is not the most organized. I gave him the original software CDs but he know longer remember where he placed them. The OS X 10 CD say iBook on them but not G4 or G3 and are more then likely belong to my G4 iBook. Those appear to work. 10.3 is an upgrade CD. I assume it is okay BECAUSE I no longer use 10.3 on any of my macs in my home.
    I seem to remember when purchasing 10.3 CD it was a nightmare to install. One of the problems was that it corrupted the "PRIVILEGES". So around 5PM I restarted the G3 iBook and ran Disk utilities and had it repair the "PRIVILEGES". It has been running 5 hours NOW and is less then half way through repairing them.
    Steve
    Angry Dog Press
    Steven Noppenberger
    noppie@angrydogpress
    www.angrydogpress.net

  • Black screen instead of login window

    Hello.
    I have a problem when booting a PowerBook G4 running Mac OS X 10.5.8.
    I turn it on, see the grey screen, see the Apple logo, see the loading icon, see (for a fraction of second) the blue screen and then....black screen and nothing more.
    I have made a few tests:
    - safe boot/mode/login
    - verbose mode, no remarkable errors
    - single user mode (fsck, renaming com.apple.loginwindow.plist, even renaming /Library/Preferences, ...)
    but with no success.
    Does anyone have any suggestion?
    Thanks.

    System restored from a Time Machine backup, I found no other way.

  • Black screen just before login. laptop works fine though any fix?

    recently as I turn my laptop on just before the login menu I have a ~30second black screen then its goes onto the login menu, I was wondering if there is any fix for this, my laptop works fine afterwards
    MS Window 8 64bit
    Intel Core i5-241
    m 2.30GHz
    6 RAM INTEL HD GRAHICS 3000

    Hi,
    Was your issue resolved?
    If yes, we will archive this thread temporarily.
    If no, please reply and tell us the current situation.
    If you have any other question, feel free to contact us. We will try our best to help you.
    Karen Hu
    TechNet Community Support

  • Black screen after successful login into Remote Session

    Hi,
    I am having windows 8.1 pro(64bit) and windows 7 pro(64bit) machines using which i am trying to connect to a remote VM with windows 7 enterprise through vpn client 5(64bit). After successful login, BLACK SCREEN with Connection bar is displayed. Ctrl+Alt+End
    did not work.
    In fact, a strange behaviour experienced. After failing once, i tried again with IP address instead of host name. Bingo, it works well. Then disconnect and try to reconnect, problem repeats. What i mean is, the problem is neither Consistent not persistent.
    I am frustrated trying to solve the issue. Blogs, forums, communities.... where ever what ever solutions suggested, tried without any luck. Any help please ? Thanks in advance.

    Hi,
    Thank you for posting in Windows Server Forum.
    From your description it seems that you facing Black screen issue, but when you tried with IP address you can logon to the remote session but during reconnection issue repeats. Correct me if misunderstand your case.
    From last how may days you are facing this issue?
    Can you find any suitable error\event ID for this case?
    For this firstly please check that you have proper connectivity between systems. Please check that you can Ping successfully to the remote system with IP address and hostname. 
    Might this issue caused by some stopped service “Desktop window manager session” which stop after RDP login. You can check the status as follow.
    1. After the issue appear, please use RDP connect to the computer again and check the Desktop Window Manager Session Manager service status. 
    2. Then, please restar the computer and check System Event log to check if has a Desktop Window Manager Session Manager service error.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • [MBP 13" mid-2012] How to daisy chain monitors?

    I Have 1 Dell Ultrasharp U24H14 connected to my MBP with a miniDP to DP port cable (using the thunderbolt port on my MB)
    I only have 1 thunderbolt port on my MB.
    I'd like to have another Dell Ultrasharp U24H14 connected. Can I do this through daisy chain? So connect the second Dell Ultrasharp U24H14 with and DP cable to the other Dell Ultrasharp U24H14 monitor. One of the monitors go to my macbook using an DP to miniDP cable.
    Is that setup going to work?
    The monitors do support daisy chain. Does my macbook?
    If not, what should be the other possibilty to connect it? USB to HDMI or so?

    Wow, let's see. What won't get replaced? The screen? The drives? The fan? Some auxilliary cards, like the BT interface? A few screws?
    And then, lets hope those bits & pieces that were recycled really didn't get wet and don't fail down the line.
    Make sure you get some form of written proof that the thing will still have some form of warranty afterwards. AppleCare may be advisable if you don't have it already. Else cut your losses, sell it off for parts and get a new and unsullied one.

  • Daisy chain monitor from cinema display MacBook Air 5,2

    I know the Mid-2012 MacBook Air is capable of 2 external displays as described here.
    The monitor works when plugged directly into the MBA, but not when daisy chained from the back of the cinema display.
    It's a dell monitor, and I'm using an Apple Thunderbolt-VGA adaptor.
    Is there something I'm missing? Thanks!

    As far as my question itself -- why does this happen? Has anybody had this issue on Lion and had it resolved on Mountain Lion?

  • HP protect Smart 5CD2372372519 window 8 labtop with complete black screen except for login spot

    The desktop and Pc is not working or responding. I'm not able to log in since I don't know the password. I need to delete that account.

    Ok, problem could be maybe elsewhere than I thought.
    I found slim does this when I start it manually by rc.d script.
    When I disable it from daemons in rc.conf and try to start it by hand after clean boot it did exactly same behaviour.
    What's different if it start from daemons or by rc.d script? I thought it did the same thing?

  • IMac 27" flashes to white on startup, chimes, then goes to a black screen. It works fine on an external monitor. Any ideas how I can fix this?

    I've got a late 2009 iMac 27". When I start it up, it chimes and makes all the normal sounds. The screen flashes white for 2 seconds, then goes black. The iMac starts up (if I use an external monitor, it works fine) but the screen remains black.
    Weirdly, if I start it up on Bootcamp as a Windows machine, it flashes white, then flashes briefly a few seconds later on the Windows logo, then goes to black.
    I've reformatted the hard drive and performed a clean install of Lion. I've got some Apple knowledge, so I've taken the front bezel off and checked for loose connections. Everything appears fine. All 4 diagnostic lights are on on the logic board.
    I'm stumped. I don't want to splash out on a new LCD screen if it's the inverter or something else that's the problem
    Any ideas welcome!

    Ah. I'm not able to run the hardware test because it only works on the main screen. There's no obvious way to switch to an external monitor when AHT is running, which is ridiculous if the hardware fault concerns the screen! The problem isn't with the backlight - there is no dimmed image on the screen, it is just off.
    I'll just have to use it with an external monitor, I guess - which defeats the purpose of buying an iMac!
    Thanks for your help, though.

  • Daisy chain monitors and hard drive

    How can I connect two additional monitors and an external hard drive to my iMac?

    Only Thunderbolt allows for chaining Displays and External Hard Drives.
    In addition your Thunderbolt devices must have an additional Thunderbolt port to chain the next device to.
    Apple - Thunderbolt: Next-generation high-speed I/O technology.

  • WINDOWS 8 BLACK SCREEN AFTER LOGIN PROBLEM

    Please help me i have a problem with my computer it goes black screen after i login
    my desktop is hp pavilion a5055d my os is windows 8 i dont know what the problem
    i have a ati radeon xpress 1100 for videocard ..
    I tried to restart many times. 

    Hi,
    Did this issue occur before?
    Try to logon with Safe Mode to see if the same issue occurs.
    Furthermore, you can try to update BIOS for your machine?
    You can refer these article to update BIOS if your machine cannot boot:
    http://www.ehow.com/how_7356859_update-bios-windows-won_t-boot.html
    http://www.wikihow.com/Fix-a-PC-Which-Won't-Boot
    Hope that helps.
    Leo Huang
    TechNet Community Support

  • MSI R7 260x black screen @ login

    Gday all
    Recently i purchased a R7 260X and am having troubles.
    I uninstalled all my previous drivers and shut down my pc, put my new card in, installed the latest drivers and restarted. Upon restarting i was greeted with a black screen where my login should be. Without any drivers installed i can do everything normal (except obviously games/blue rays etc) and WITH drivers, i can only start up in safemode or im greeted with the black screen
    I have tried the drivers that came with the cd, from the msi website and the amd website, non of which seem to work. Someone in a previous thread said he had the same issue and fixed his card by flashing the bios. I dont consider my self techy enough to be wanting to fiddle around with that.
    If anyone could give me some ideas on what to do that would be great

    OS: Windows 7 Home Premium 32-bit SP1
    CPU :AMD Athlon II X4 620
    RAM :4.00GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
    Motherboard: MEDIONPC MS-7646
    Graphics card: 1024MB ATI AMD Radeon HD 5700 Series (XFX Pine Group)     (currently using until i can use my R7)
    PSU: aurora gold 700w

  • Black screen after logging in

    Every time I turn on my computer (15-d035dx), it results in a blank black screen. The login screen works just fine and I can see everything perfectly, but the homescreen results in black, even though I can see the mouse pointer and when I press ctrl alt del, I can see that too. I've tried a hard reset and all the other 4 steps I keep reading about, but no luck. Any suggestions? I need this computer for work and school 

    Hi
    1) Power on the unit keep tapping the F8 key select safe mode check if the unit loads to windows please let me know i will inform you the next step you may also want to try Shift key + F8 as well.
    2) In case 1st option does not work try F2 once unit is powered on and run the system diagnostics test.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Black screen on MacBook Pro Retina Display after installing Moutain Lion. Need Help!

    My macbook pro (retina) screen went black after I installed Mountain Lion.
    I got a HDMI cable to another monitor and the image worked nicely there.
    But i cant get it back on my MacBook Pro! I tried taking out the HDMI cable, restarting, searching on settings configs..
    What should I do?
    Are there any drivers i should install to get image back on my MacBook Pro Retina Display?
    Has this happened to anyone else?
    Thanks in advance for all the help.

    That helped me finding other people with similar problems.
    But there is a major difference!
    -They have a black screen after they login.
    -My screen is black NOW! And I'm only using my BRAND NEW rmbp with the HDMI cable to my TV!
    This isnt good at all and I would like to solve it asap..
    I tried reinstalling Mountain Lion, taking out the hdmi cable and rebooting many times.
    Until now, nothing!
    Is my screen broken or maybe my video card has some problems?
    I hope not! I just traveled from the US to Brazil and I dont want to search for an Apple Store here.
    Any tips or ideas are welcome, thank you.

  • Black screen on macbook pro 13in 2011

    A few weeks ago my screen went black while I was having a web cam chat with my wife. I was able to hook it up to my flat screen TV and it is working fine but not on my main apple disply screen. The apple icon on the back isn't lighting up and I can see shadows on my screen now after I did a PRM reset. Everything is working the way it should just not the screen. I'm living in China so my options are limited to where I can go to get it fix. I don't want anyone telling me its the mother board when I know it isn't (as I was told before along with a very high price for a new one).
    Can anyone help me with a self repair option?
    Thanks. 

    That helped me finding other people with similar problems.
    But there is a major difference!
    -They have a black screen after they login.
    -My screen is black NOW! And I'm only using my BRAND NEW rmbp with the HDMI cable to my TV!
    This isnt good at all and I would like to solve it asap..
    I tried reinstalling Mountain Lion, taking out the hdmi cable and rebooting many times.
    Until now, nothing!
    Is my screen broken or maybe my video card has some problems?
    I hope not! I just traveled from the US to Brazil and I dont want to search for an Apple Store here.
    Any tips or ideas are welcome, thank you.

Maybe you are looking for

  • Unable to import video from camcorder into iMovie HD

    I am using a Mac mini PowerPC G4 (1.5). I recently bought a Sony Handycam DCR-DVD 106E camcorder that uses DVD discs. The camcorder has no Firewire (iLink) output so I have inserted the DVD into my external DVD writer/player. I can play the footage v

  • How do you remove ALL of my Podcasts from iTunes !!

    Hi, having read several topics I am glad, but also sad, to know that I am not the only one having problems with submitting Podcasts onto iTunes. I have one which is still showing the 'Old' art cover, asked iTunes to remove and got nowhere, it is stil

  • Error occurred while writing cube data - PCon

    Hi, Could you help me? I have created new application, but when I try to enter and save PCon values, I get a message: "Error occurred while writing cube data.". What could be the reason? I was able to update other data forms. Thank you in advance

  • No Backend Document created

    we have setup extended classic scenario in SRM 7. The Shopping Cart creates a local PO but there is no backend PO created. We do not see any errors in RZ20 or ST22. Are we missing any config? Appreciate any inputs. Thanks, AB

  • Incomplete DDL export for tables

    I'm using SQL Developer 1.2.1 Build 32.13 on Debian GNU/LInux. If I create tables like these: create table t_0 a number not null alter table t_0 add constraint pk_t_0 primary key( a ); create table t_1 a number, b varchar2( 100 ) not null, c varchar2