Black window on IPOD TOUCH

Good day, ummm i have again problem with my ipod i have black Windows on my ipodtouch, button on/off its out of service not power...ok i tried ipod Connect to PC starting itunes waiting...soo hmm itnes speek me *you must restore this ipod efore if can be used with itunes* (check pic no.1 ) i give restore and update and i waiting and anything i disconect ipod and its not ok my ipod again dont power its black Windows again please can you help me?
Yours sincerely Karel Roudnicky

Your unit is in recovery mode. Try these basic troubleshooting steps. It has detailed restore instructions--along with troubleshooting restore problems.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Similar Messages

  • Is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

    is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

    You're welcome.
    What?
    Sorry, but no. The parts are identical with the only difference being a white housing or a black housing.

  • Problems with ITunes 10 for Windows with Ipod Touch

    I have had several problems with my original 16Gb ipod touch since upgrading to ITunes 10. Windows Vista Home Premium. I had no significant problems before ITunes 10.
    1. Numerous apps upgrades fail with an error message (approx) "installation failed because resources have changed." I have searched for information about this, but all I could find relates to developers, not ordinary users. I can upgrade the apps directly, using a wifi link - just not through ITunes 10. (Apps: Dictionary.com, StarWalk, etc.)
    2. After repeated examples of this, I decided to try restoring the ipod. I've done this several times in the past without problems. This time, it repeatedly failed at step 3 of 5, re-installing my music, with "unknown error." The ipod was unusable after this. I eventually had to restore on another computer that still had ITunes 9 installed - that worked, but I lost all me recent data entries. (After successfully restoring using ITunes 9, I tried again with ITunes 10 - same failure.)
    3. Now, all podcasts that I install are played back at an unusable low volume. They are just loud enough to barely hear in a very quiet room, but not loud enough to be usable. The podcasts play fine when played directly in ITunes. Music installed on the ipod plays properly. I have tried using the Podcast option in ITunes to change the volume, but that has no effect. I have tried several speakers and headsets - all the same. Podcasts are probably the most important use of my ipod, and now they are useless. These are popular podcasts, such as CBC's As It Happens - I don't think that the originator would have had an undetected problem for this long.
    Any suggestions?

    This symptom could be caused by an unusable iTunes configuration file. Follow the steps below to troubleshoot this issue.
    Remove SC Info.sidb file
    (This applies to Win7 or Vista)
    From the Start menu, click Computer.
    In the Organize menu, click Folder and Search Options.
    Click the View tab.
    In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
    Click OK.
    Navigate to the following location by either typing it into the address bar, copying and pasting it into the address bar, or clicking through the folder hierarchy listed: C:\Program Data\Apple Computer\iTunes\SC Info
    Right-click the SC Info.sidb file shown and on the shortcut menu, click Delete.
    Right-click the SC Info.sidd file shown and on the shortcut menu, click Delete.
    Restart the computer and open iTunes.
    If this does not work, repair your Quicktime - START / CONTROL PANEL / PROGRAM and FRAETURES / highlight QUICKTIME and click REPAIR

  • Windows 7 ipod touch 1st gen conneting issues

    I just got a new Lenovo G550 with windows 7, and whenever i try to connect my ipod touch 1st generation to the computer I here the connecting "ding-dung" but my ipod doesn't charge or isn't recognized by itunes.

    Sounds like something came loose or exposed. From what i read, it looks like your battery is losing it's charge quickly. My advice would be to take it in to a local apple store and see if they can fix it or run a diagnostic. Unfortunately, if i had to guess i'd say there's a hardware problem since your battery is dying so fast and is having charging problems. Good luck.

  • Windows reads ipod touch as camera

    Ive recently been having problems with my ipod touch. my labtop and desktop computer has been reading my ipod as a camera everytime I plug it in, the same goes for itunes. Im currently running windows xp service pack 3 on a dell computer and have updated to the most recent version of itunes. My model number ipod is MB528LL on an 8 gig ipod touch. I'd apreciate any advice or help, thanks in advance.

    Welcome to Apple Discussions!
    Go to Photos. Saved. There may be a photo in there. If there is, you likely press the Home and Wake/Sleep keys simultaneously, which results in a screen capture. Just delete this photo (press on the photo and the option pops up). After you've done this, the camera pop-up should stop.

  • Black Screen On iPod Touch When Trying To Restore

    Hi,
    I was trying to add some purchases to my iPod tonight from my computer to my iPod Touch 4 Gen. I plugged my iPod in as normal and when iTunes opened, it asked me if I'd like to update some software. I got most of the way through this when it told me that it couldn't update because it had encountered an error. So I unplugged my iPod and as soon as I did that, the 'connect to iTunes' screen came up. So I did reconnect the USB but the screen wouldn't disappear and iTunes wouldn't recognise my iPod.
    So I Googled the possible causes and solutions and it turns out that a lot of people have had the same problems ith the recent update and most suggested that those with the problem should try to get it into restore mode by holding down both the home and sleep button to turn it off, then disconnecting and reconnecting the device and then restoring it via iTunes. I tried the first step of this, but once I had let go of the buttons after the ten seconds, the screen was still black and now it won't do anything. Although Itunes still won't recognise my iPod, my computer is still making the noise as if it is connecting and it makes the disconnect noise when I remove the charger. But still not a flicker from the screen.
    I'm not brilliant with computers and so any solutions I have found online have been too complicated for me to follow. But I'm terrified that my iPod is now broken and I need to fix it a.s.a.p.
    Please help folks!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • White screen/black screen on ipod touch

    I have the 'white screen' problem. I have tried to restore through itunes but ipod touch does not respond and the screen goes black. When I simultaneously hold the home and on/off buttons down, sometimes it responds, sometimes not. Very inconsistent results.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1459 my screen has gone black from my ipod touch but its still on and sounds?

    My ipod was recently fixed because the screen was cracked then like two days later i drop my ipod but the fall wasnt even that bad when i check to see if my ipod is ok i notice that my screen is all blac but my music was still playing i tried iMessaging myself throuch my sisters ipod and it sounded i also tried facetimeing myself and my screen was all black but My sisters ipod saw me perfectly i also noticed my ipod was making very weird noises during the face time. i tried charging it but nothing happend. My sleep button doesnt wor either. Please help me!!!!!

    Hello susilovesyou1,
    I would be concerned too if my iPod touch only displayed a black screen.  I found an article with steps you can take when you experience and issue like this:
    Display has no backlight or dark screen
    Try turning the iPod touch off and then on again.
    If the issue persists, try to reset the iPod touch while it is connected to power.
    My issue is still not resolved. What do I do next?         
              Contact Apple Support.
    You can find the full article here:
    iPod touch: Hardware troubleshooting
    http://support.apple.com/kb/TS2771
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Windows 7 - ipod touch 8gb always recognizes as a new ipod

    hey,
    whenever i connect my ipod touch 2nd gen 8gb to my computer, it always comes up in itunes as a new ipod, and the "set up as new ipod" screen comes up.
    i just updated to windows 7 and have itunes 9.
    also, i connected an ipod nano chromatic and it worked fine on itunes.
    can anyone help?

    Dell studio 1747 laptop
    Aha! Intel P55M chipset. Yes that (and the P55) have been among the grumpy ones for iPod connections on Windows 7 systems.
    One of the things that has helped some people with those issues is a BIOS update, and there's a brand spanking new version of the BIOS available on your downloads page (Version A07, posted on 2/11/2010). Are you up to date on that? If not, I'd try updating.
    [Drivers & Downloads for Studio Laptop 1747|http://support.dell.com/support/downloads/driverslist.aspx?os=W764&catid=- 1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=STUDIO174 7&hidos=W732&hidlang=en&TabIndex=]
    If no joy with the BIOS update, I'd try the following document. (I've had at least one success with it in recent days with one other person with a PM55 issue.)
    [iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
    Any better performance with syncing after undertaking either of those two measures?

  • Black  screen on ipod touch

    My ipod touch screen has gone completly black.  it is charging and it is turning on as I can hear it.  Is this a broken ipod or can it be fixed?

    Hey Just what I needed,
    Thanks for the question. I understand you are experiencing issues with your iPod touch. The following article may help to answer your question:
    iPod touch: Hardware troubleshooting
    http://support.apple.com/kb/TS2771
    Display has no backlight or dark screen
    1. Try turning the iPod touch off and then on again.
    2. If the issue persists, try to reset the iPod touch while it is connected to power.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • Windows 7: iPod Touch 2G/3G not recognized anymore after updating to 3.1.2.

    Hi there! In need of some serieous help!!!
    I got two iPod Touches. 2G and 3G. I wanted to install the latest update, but this hung up with both devices. It seems like a driver problem. The device manager show two "Apple Mobile Device (Recovery Mode)". Manually installing a driver is successful, but only with one of the entries. The other one cannot be started.
    Please help! My iPods are absolutely useless now. The are in recovery mode as it seems. Where are the drivers? Apple?!?! HELP!
    Thank you.

    The recovery at a XP-PC was successful! So it's clearly a driver issue.
    For he ones who have a similar problem, but without the two "Recovery Mode - Devices" in the device manager, I had this problem, too. But it was easier to solve.
    Look for your iPod in the device manager. It can be found in "Portable devices". Let your Windows (even 7) update the driver online. That helped in my case. But only till I tried the firmware update... :-/
    So be careful! If you want to update the software of your iPod Touch or iPhone, too, I think, on a Windows 7 machine, make sure, that you have another PC with an older OS in reach!
    I hope I could help somebody till Apple releases some compatible drivers...
    Bye, folks.
    Sascha from Germany

  • Windows 8 - Ipod touch fails to start ITunes when plugged in ?

    When I plug in my Ipod touch ITunes fails to start even though it is enabled in my IPod touch settings.  It used to always load up Itunes in Windows 7 but I can't figure out what the problem is.
    Any ideas ?

    Start here:
    iOS: Device not recognized in iTunes for Windows
    I would start here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Windows with ipod touch

    How well does the ipod touch work with windows. I would be using itunes, but how well does it work with syncing calendars and contacts?

    Read the manual here :-
    http://manuals.apple.com/manualsList?config=W4N&model=iPodtouchManuals
    Ian

  • Black or White iPod Touch 5g?

    They both look so cool! The black looks sexy and sleek, but the white looks newer and just classy. They remind me of the ipad mini, but what one should i get?

    Get the white one if you like them both. You can always get a black case for it. :)
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Windows iPhone/iPod Touch SDK

    When will apple have windows sdk for making apps for the iPhone and iPod Touch?

    If you are eager to make applications for mobile devices, like the iPhone itself sorry you can't. Only on mac computer that you are able to make application for the Iphone/iPod touch. For some reason the problem for an sdk to not be for windows it might have to be with the competition between Microsoft an apple.(I'm just speculating due to the constant attacks of mac vs windows pc commercials)
    But if you have a great idea for an application, move to two rounds down to Google.... Yeah! You heard right google android system which it allows you to create application right on your windows operating system. Plus, you are totally guaranteed that application makes it to the store and it's a more open system than own apple ecosystem.

Maybe you are looking for

  • How to get start date of the period for a given date from cube

    I have a situation where i need to find the start day of the period for a given date. is there a way to know that. i want to use that in my report. i enter the date from my report(i have date parameter), depends on the date, i want to display the sta

  • Unable to change the thread's priority at linux jdk6

    i try to set the thread's priority to value like Thread.MIN_PRIORITY i observe the thread's priority by "threadump" the setting is ok at windows (XP + jdk5 build 1.5.0_12-b04) but not at linux jdk6 (build 1.6.0_04-b12) at linux, i see all threads at

  • Urgent web service problem. can not find url of WSDL

    Hi all, I met a web service problem recently. 1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application

  • Front Panel Position Confusion

    In my program I have multiple wavefrom charts; I would like to call a reentrant subvi, ie small dialog window, that "pops up" over each chart, see attached picture. I would like to dynamically set the position of the dialog window to match that of th

  • Error when Installing Eax-console as part of Audigy support pack 3.6

    <div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem: I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently