Blank entry is not getting updated in r/3?

Hi Gurus,
I have a webdynpro application which has user input field where in which user can pass the data and it will get updated once user hit the update button in the view.
But in some case if user don't enter any value in the above said input box it has to update the r/3 with the blank entry.
But in my case r/3 system refers the value (which is passed from portal last time) instead of blank entry?
How to overcome this problem.
Please Help
Thanks in Advance,
Dharani

Hi,
Suppose you are using a function Module X which takes input "empno" ..., and exports name, city , rcode
Go to se37 , check the code ....it can be like this ...
if empno = .... then
update .......
// updated
else
// not updated ........
end if .
if updated ... u will observer 0 else some other number say 4.
Now when u do modelling in your webdynpro application , u can find export parameters know..
now u can check ...if rcoe = 0 ..updated else ...not updated ...
by that u can know...
Thanks,
Srini

Similar Messages

Table control itab not getting updated.

Hi,
I have a table control created with the help of the wizard.
There are initailly no entries in the table and the user enters it during execution.
However the entries do not get updated in the internal table.
The modify statement below fails giving sy-subrc value 4.
MODIFY gt_bank_det_new
FROM gwa_bank_det_new
INDEX zbp_bank_dt_new-current_line.
Can you suggest what could be going wrong. There are no type mismatches and the table is a standard one.
Thanks in advance.
Arindam.

Hi
in PBO
Loop at itab with control tc.
endloop.
In PAI,
loop at gt_bank_det_new.
module modify_tab.
endloop.
in Program
module modify_tab
describe table itab lines tc-lines.
if tc-lines <= tc-current_line.
MODIFY itab FROM wa INDEX tc-current_line.
else.
append wa to itba.
endif.
endmodule.
Cheers
Ramchander Rao.K

Batch Classification data not getting updated during the GR of the PO

Dear Gurus,
While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N reads the information directly from the
reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
Sumit Mohan

Hi Sumit,
I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
Regards,
Bhagat

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??
iPhone 5s
Software - IOS 8.1
iTunes - v12
I have been using sync on all previous phones to date without issue, I have had the 5s since Nov 2014 and no issue, on Sunday without warning or changes to my phone or Outlook sync now has this error.
I have restored my phone but still has same problem.

Your IT person is an idiot.
http://lmgtfy.com/?q=how+to+sync+iphone+with+outlook

Data is not getting updated in R3 from CRM

Hi All,
I have a small query pertaining to CRM Middleware.
We have extended the standard scenario using EEWB for sending few customer fields thru CUSTOMER_H. This is assigned to the adapter in R3AC1.
The data is getting populated in the structure correctly. But the problem is that the Z* field is not getting updated in R3. The more strange thing is that it is getting overwritten in CRM by data from R3.
I have checked the problem and found out that the updateflag for z* field is missing. But the problem is that I donot know, how to populate the update flag for the field.
Is there any customization or setting in EEWB for updating the flag?
Please help... Please let me know if u want more informaiton.
Thanks
Sanu

Sanu,
The reason for R3 data getting overwritten in CRM is because the BSS_CENTI has a blank record
and BSS_CENTIX structure might have a X indicator within BAPIMTCS structures.
BSS_CENTI holds central data for the customer and BSS_CENTIX holds the change flags for the fields in central data.
To fix this issue, you have to use CRM table SMOFSUBINT and configure a custom function module which basically yanks the 2 structures from BAPIMTCS table.
Note:- You do this ONLY if you don't want custom fields from ECC to update CRM. Otherwise you have to make sure the BSS_CENTI and BSS_CENTIX structures are consistent in CRM and ECC.

Item text is not getting updated in Payment document generated through F110

Hi all,
After generating the payment document via Transaction Code u2013 F110, system is not updating the Text field in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
While processing the document via transaction code u2013 F110, in the layout shown for the Invoices to be considered for payment (screen of u201CEdit Proposalu201D), text is not getting updated. When we pressed F1 at the Text field (Which is blank) we came to know that it is a u201CItem Textu201D with u201CTable u2013 REGUEu201D / u201CField u2013 SGTXTu201D.
In BSEG (SGTXT field) as well as BSIK (SGTXT field) we are getting the Invoice document with the text maintained in it via MIRO or FI invoice.
But while processing the invoices through Tcode - F110, in the layout of Edit Proposal (Table - REGUE / Field - SGTXT) we are not getting the u201CText fieldu201D but getting the other data such as Doc. No.( Table - REGUE / Field - BELNR), Fiscal Year (Table - REGUE / Field - GJAHR) etc for processing the proposal which is getting shown in BSEG as well as BSIK.
In case of manual payment (F-53) we can input the text manually hence that will get updated in payment document but this thing is not possible with F110.
Can anybody guide me on getting the ItemText (Not Doc. Header text) in FI payment document after F110 execution?
Regards,
Shridhar

Hi Suresh,
Thanks for the prompt reply. We will be obliged if you guide us in that respect since F110 is a Std. SAP code.
Have you refer OSS before arriving at the conclusion of developing ABAP program since the Item Text is a std. field of Std. Tcode - F110. Same should had been get updated while making the payment in reference to the Invoice which haves item text in it ?
Regards
Shridhar
FICO

Mat doc not getting updated in AFRU table

Hi All,
While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are entered at the time of confirmation.
The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
Regards
Ankush

Dear Ankush
please see FAQ note 540392 question 11.
11. Question:
Despite successful goods movements, the material document is not
updated in field AFRU-WABLNR. Where do I find the document number?
Answer:
As of Release 3.1H, the system provides the reference from
confirmation to material document via table AFWI. The system still
only uses AFRU-WABLNR in the case of header confirmations or
confirmations for an individual operation. With milestone
confirmations or with separate goods movements, in other words goods
movements that are posted in the update program or via requests
(BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
always supplied due to technical reasons.
BR Sabine

Product description- is not getting updated..

Hi APO Expert,
I am getting error in description of product - it is not getting updated..
Material description is changed in R/3 same is not getting extracted in APO. However, other forecast data and transaction data of extracted successfully. Please note Product start data is maintained from few days onwards.
Regards

Hi Rushikesh,
Go to CFC9 in R/3 and check what value do you see for material master change transfer:
1) If it's blank, you won't get changes from R/3 to APO. If your CIF jobs run daily, then change the value of 1. Changes will come to APo after CIF job for material will finish.
2) If it's 1, then you need to re-CIF the material to get the changes in APO
3) if it's 2, only then the changes are supposed to happen immediately when you change the description in R/3. If your setting is 2, then you need to check if an active integration model (IM) exists for your product or not. Go to CFM5, give your product and check if an active IM exists.
PS: not clear regarding your comments about forecast. Forecast could go from APO to R/3, and not the other way around.
Thanks - Pawan

Not getting updating in a table....

Hi friends,
Currently i working on integration of apex with ebs R12.....And i have successfully integrated following the rod west document....
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends,
Thanks in Advance..
Regards,
Harry...

Goodmorning,
Have you had a look for notes, Depending on the release and industry sollution you can find several notes on this subject (start looking for message RW 022).
Annemarie de Bruijn

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

TDS reversal entry is not getting generated at time of F-54

Dear All,
I have made down payment request through F-47 transaction code and down payment made by Transaction code u2013F110 (instead of F-48) and TDS is deducted at this point. There after I made invoice through MIRO / F-43 in which TDS is again deducted for whole invoice amount. I have cleared down payment through T.code F-54. But at this time TDS reversal entry is not getting generated and only customer account is credited and debited.
So in short TDS is getting deducted at time down payment and at time of Invoice for their respective full value.
Note: For TDS type on payment I have selected u201CCentral Invoice PROPu201D and we are not using business place and section code. Please help me.
Appreciate all expertsu2019 help ASAP.
Thanks ,
Manas kumar

Hai Manas,
If ur not using business place how can u get remitance chalana thats why first u can configure the business plance. I think ur already posted some entries its correct? In this case u will run this t.code business place update the previous entries i.e., J1INPP this is very useful to u
Regards
Madhu I

GRR reference not getting updated in J1IEX

Hi All,
We are capturing part 1 entry at our factory gate through j1iex_c.Then doing Goods receipt at stores through MIGO.
Now when we see vendor excise invoice in j1iex grr reference is not getting updated.
Awaiting responses.
Sandeep

Hi,
As per my knowledge we can capture the excise after receiving the goods only.
so your requirement is not possible . because we can post the excise with reference to vendor excise invoice number only it was given at the time of g/r in migo only.
Thanking you.

BWFI_AEDAT table not getting updated - FI_GL_4 Delta

Hi Friends,
We have just started loading Delta loads using FI_GL_4.
The Changed records are getting updated correctly for all the documents into BWFI_AEDAT and loaded into BW except in cases of an Intercompany doc.
Is there a particular reason that changes to Intercompany Doc will not get updated in the table or is there a way to find out how this table gets populated so that I can debug this issue.
Any help is highly appreciated..
Ashish.

Hi,
How many days after INIT are you going for delta??
If there is entry in BWFI_AEDAT there is no reason why delta should not come.
check for newly created documents in BKPF using CPUDT to see if new documents have been created in this period too.
Regards,
Saurabh

KINAK field in Table KONV not getting updated with value W

Hi,
I have a PO where I am deleting a line item.
After I delet line item the field KINAK in table KONV gets updated with value W.
But I am getting instance where in some cases the field KINAK is not getting updated.
The result is deleted line item is getting populated in PO output also.
Regards
Nandiini

KINAK is updated only when a Condition is inactive ! So when a item is deleted the condition becomes inactive and gets updated with 'W' which means statistical(not to be counted)
A     Condition exclusion item
K     Inactive due to calculation basis/shipping material type
L     Condition exclusion header or inactive at header level
M     Inactive due to manual entry
T     Inactive at header level
W     The document item is statistical
X     Inactive via formulae of incorrect
X     Inactive via formulae of incorrect
Y     Inactive because of subsequent price

REGUP Table Withholding tax field not getting updated

hi friends,
from a specifc date with holdiing tax is not getting updated in REGUP-QBSHH field, so in payment advice its not getting displayed. can any one help me wat could be the problem for this
thanks
nagaraj

hi amir,
i dont have test case for that. till 28th of the last month the field has been updated and after that till now all the entries in that field is showing zero. but when we check in FB03. i can see the with holding tax amount. can u tell me how this table is getting updated
thanks

Blank entry is not getting updated in r/3?

Similar Messages

Maybe you are looking for